STM32F429VET6 vs STM32F429VGT6 Comparación
Comparación detallada lado a lado de STM32F429VET6 por STMicroelectronics y STM32F429VGT6 por STMicroelectronics. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
STMicroelectronics
STM32F429VET6 - 180MHz Cortex-M4 MCU, 512KB Flash, LQFP-100 | STMicroelectronics
STM32F429VET6 ✓ ActivoSTMicroelectronics
STM32F429VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | ST (Tape & Reel)
STM32F429VGT6 ✓ ActivoComparación de especificaciones
| Parámetro | STM32F429VET6 | STM32F429VGT6 |
|---|---|---|
| Marca | STMicroelectronics | STMicroelectronics |
| Categoría | Microcontrollers | Microcontrollers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $9,21 | $10,85 |
| Core | Arm 32-bit Cortex-M4 with FPU | ARM Cortex-M4 with FPU and DSP instructions |
| DSP Instructions | Yes | — |
| Frecuencia de reloj máxima | 180 MHz | — |
| DMIPS | 225 DMIPS / 1.25 DMIPS per MHz (Dhrystone 2.1) | — |
| Program Flash | 512 KB | — |
| SRAM | 256 KB + 4 KB backup | 192 KB (including 4 KB backup SRAM) |
| Encapsulado | LQFP-100 (14x14 mm) | LQFP-100 (14 x 14 mm) |
| Tensión de alimentación | 1.8 V to 3.6 V | — |
| Temperatura de funcionamiento | -40C to +85C (industrial grade) | -40 C to +85 C (grade 6) |
| USB | USB OTG Full-Speed + USB OTG High-Speed (on-chip PHY) | — |
| Ethernet | 10/100 MAC (external PHY required) | — |
| TFT-LCD Controller | Yes (up to SVGA 800x600) | — |
| Camera Interface | 8- to 14-bit parallel | — |
| ADC | 3x 12-bit, 2.4 MSPS | 3 x 12-bit, up to 2.4 MSPS |
| DAC | 2x 12-bit | 2 x 12-bit |
| Timers | 17 (incl. PWM, HRTIM on some SKUs) | 17 (including 12 x 16-bit, 2 x 32-bit) |
| Communication Interfaces | Up to 20 (USART/SPI/I2C/CAN/SAI/SDIO) | — |
| Crypto | AES-128, Hash, RNG | — |
| Estado RoHS | Compliant | Compliant |
| Tipo de montaje | Surface Mount (LQFP) | Surface Mount |
| CPU Maximum Frequency | — | 180 MHz |
| DMIPS Performance | — | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) |
| Flash Memory | — | 1 MB |
| Operating Voltage | — | 1.8 V to 3.6 V |
| ART Accelerator | — | Yes (0-wait-state Flash execution) |
| MPU | — | Yes (memory protection unit) |
| LCD-TFT Controller | — | Yes, up to XGA resolution |
| DMA2D (Chrom-ART) | — | Yes |
| USB OTG | — | HS + FS (with on-chip PHY) |
| Ethernet MAC | — | 10/100 with IEEE 1588v2 |
| CAN Controllers | — | 2 x CAN 2.0B active |
| GPIOs | — | Up to 82 fast GPIOs |
| Crypto/Hash Accelerator | — | AES-128/192/256, SHA-1, MD5, 3DES |
| SDMMC | — | 1 x SDMMC host |
| Communication Peripherals | — | UART, SPI, I2C, SAI, SPDIF-Rx |
| Nivel MSL | — | 3 (168 hours) |