STM32F429VET6 vs STM32F429VGT6 Vergleich
Detaillierter Direktvergleich von STM32F429VET6 von STMicroelectronics und STM32F429VGT6 von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
STM32F429VET6 - 180MHz Cortex-M4 MCU, 512KB Flash, LQFP-100 | STMicroelectronics
STM32F429VET6 ✓ AktivSTMicroelectronics
STM32F429VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | ST (Tape & Reel)
STM32F429VGT6 ✓ AktivSpezifikationsvergleich
| Parameter | STM32F429VET6 | STM32F429VGT6 |
|---|---|---|
| Marke | STMicroelectronics | STMicroelectronics |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $9,21 | $10,85 |
| Core | Arm 32-bit Cortex-M4 with FPU | ARM Cortex-M4 with FPU and DSP instructions |
| DSP Instructions | Yes | — |
| Maximale Taktfrequenz | 180 MHz | — |
| DMIPS | 225 DMIPS / 1.25 DMIPS per MHz (Dhrystone 2.1) | — |
| Program Flash | 512 KB | — |
| SRAM | 256 KB + 4 KB backup | 192 KB (including 4 KB backup SRAM) |
| Gehäuse | LQFP-100 (14x14 mm) | LQFP-100 (14 x 14 mm) |
| Versorgungsspannung | 1.8 V to 3.6 V | — |
| Betriebstemperatur | -40C to +85C (industrial grade) | -40 C to +85 C (grade 6) |
| USB | USB OTG Full-Speed + USB OTG High-Speed (on-chip PHY) | — |
| Ethernet | 10/100 MAC (external PHY required) | — |
| TFT-LCD Controller | Yes (up to SVGA 800x600) | — |
| Camera Interface | 8- to 14-bit parallel | — |
| ADC | 3x 12-bit, 2.4 MSPS | 3 x 12-bit, up to 2.4 MSPS |
| DAC | 2x 12-bit | 2 x 12-bit |
| Timers | 17 (incl. PWM, HRTIM on some SKUs) | 17 (including 12 x 16-bit, 2 x 32-bit) |
| Communication Interfaces | Up to 20 (USART/SPI/I2C/CAN/SAI/SDIO) | — |
| Crypto | AES-128, Hash, RNG | — |
| RoHS-Status | Compliant | Compliant |
| Montageart | Surface Mount (LQFP) | Surface Mount |
| CPU Maximum Frequency | — | 180 MHz |
| DMIPS Performance | — | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) |
| Flash Memory | — | 1 MB |
| Operating Voltage | — | 1.8 V to 3.6 V |
| ART Accelerator | — | Yes (0-wait-state Flash execution) |
| MPU | — | Yes (memory protection unit) |
| LCD-TFT Controller | — | Yes, up to XGA resolution |
| DMA2D (Chrom-ART) | — | Yes |
| USB OTG | — | HS + FS (with on-chip PHY) |
| Ethernet MAC | — | 10/100 with IEEE 1588v2 |
| CAN Controllers | — | 2 x CAN 2.0B active |
| GPIOs | — | Up to 82 fast GPIOs |
| Crypto/Hash Accelerator | — | AES-128/192/256, SHA-1, MD5, 3DES |
| SDMMC | — | 1 x SDMMC host |
| Communication Peripherals | — | UART, SPI, I2C, SAI, SPDIF-Rx |
| MSL-Level | — | 3 (168 hours) |