THVD1450 vs MAX3485ESA+ Comparación
Comparación detallada lado a lado de THVD1450 por Texas Instruments y MAX3485ESA+ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
THVD1450 - 50 Mbps RS-485 Transceiver, ±18 kV ESD | Texas Instruments
THVD1450 ✓ ActivoComparación de especificaciones
| Parámetro | THVD1450 | MAX3485ESA+ |
|---|---|---|
| Marca | Texas Instruments | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Manufacturer | Texas Instruments | — |
| Product Type | RS-485/RS-422 Transceiver | RS-485/RS-422 transceiver |
| Data Rate (Maximum) | 50 Mbps | — |
| Supply Voltage Range | 3 V to 5.5 V | — |
| Number of Drivers / Receivers | 1 / 1 | — |
| Duplex | Half | — |
| ESD Protection (Bus Pins, IEC Air) | ±18 kV (HBM, IEC 61000-4-2) | — |
| ESD Protection (Contact, IEC) | ±8 kV | — |
| Common-Mode Voltage Range | -7 V to +12 V | [DATA_NEEDED: common-mode voltage range] |
| Differential Output Swing (Typical) | 1.5 V into 54 Ω | — |
| Fail-Safe Biasing | Open, short, idle | — |
| Number of Nodes (Unit Loads) | 256 (1/8 UL) | — |
| Rango de temperatura de funcionamiento | -40 °C to +125 °C | — |
| Encapsulado | 8-SOIC (D) | 8-pin SOIC |
| Estado RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Logic Family Compatibility | 3.3 V and 5 V MCU / UART | — |
| Hot-Plug Support | Yes (glitch-free power-up) | — |
| Tensión de alimentación | — | 3.3 V |
| Maximum Data Rate | — | 10 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Supported Standards | — | RS-485 and RS-422 |
| Driver Architecture | — | Slew-rate-limited true transceiver |
| Tipo de montaje | — | Surface mount |
| Power Class | — | Low-power transceiver |
| Production Status | — | PRODUCTION |
| Temperatura de funcionamiento | — | [DATA_NEEDED: operating temperature range] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| Corriente de alimentación | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |
| REACH Status | — | [DATA_NEEDED: REACH status] |