THVD1450 vs MAX3485ESA+ So sánh

So sánh chi tiết song song của THVD1450 bằng Texas Instruments và MAX3485ESA+ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
THVD1450 THVD1450 - 50 Mbps RS-485 Transceiver, ±18 kV ESD | Texas Instruments

THVD1450 - 50 Mbps RS-485 Transceiver, ±18 kV ESD | Texas Instruments

THVD1450 ✓ Hoạt động
Analog Devices
MAX3485ESA+ MAX3485ESA+ - 10Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX3485ESA+ - 10Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX3485ESA+ ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số THVD1450 MAX3485ESA+
Thương hiệu Texas Instruments Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Manufacturer Texas Instruments —
Product Type RS-485/RS-422 Transceiver RS-485/RS-422 transceiver
Data Rate (Maximum) 50 Mbps —
Supply Voltage Range 3 V to 5.5 V —
Number of Drivers / Receivers 1 / 1 —
Duplex Half —
ESD Protection (Bus Pins, IEC Air) ±18 kV (HBM, IEC 61000-4-2) —
ESD Protection (Contact, IEC) ±8 kV —
Common-Mode Voltage Range -7 V to +12 V [DATA_NEEDED: common-mode voltage range]
Differential Output Swing (Typical) 1.5 V into 54 Ω —
Fail-Safe Biasing Open, short, idle —
Number of Nodes (Unit Loads) 256 (1/8 UL) —
Khoảng nhiệt độ hoạt động -40 °C to +125 °C —
Hộp 8-SOIC (D) 8-pin SOIC
Trạng thái RoHS Compliant [DATA_NEEDED: RoHS status]
Logic Family Compatibility 3.3 V and 5 V MCU / UART —
Hot-Plug Support Yes (glitch-free power-up) —
Điện áp cung cấp — 3.3 V
Maximum Data Rate — 10 Mbps
Driver Count — 1
Receiver Count — 1
Supported Standards — RS-485 and RS-422
Driver Architecture — Slew-rate-limited true transceiver
Kiểu lắp đặt — Surface mount
Power Class — Low-power transceiver
Production Status — PRODUCTION
Nhiệt độ hoạt động — [DATA_NEEDED: operating temperature range]
ESD Protection — [DATA_NEEDED: ESD protection rating]
Điện áp cung cấp — [DATA_NEEDED: typical and maximum supply current]
Driver Output Current — [DATA_NEEDED: driver output current]
Receiver Input Impedance — [DATA_NEEDED: receiver input impedance]
REACH Status — [DATA_NEEDED: REACH status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá