TLE82422LXUMA2 vs TLD60992ESXUMA1 Comparación
Comparación detallada lado a lado de TLE82422LXUMA2 por Infineon y TLD60992ESXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Infineon
TLE82422LXUMA2 - 8-Ch Low-Side Constant Current Pre-Driver | Infineon
TLE82422LXUMA2 ✓ Activo
Comparación de especificaciones
| Parámetro | TLE82422LXUMA2 | TLD60992ESXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Motor Drivers | LED Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $7,40 | $1,55 |
| Función | 8-channel low-side constant-current pre-driver | — |
| Number of Channels | 8 | — |
| Supply Voltage Range (VS) | 5.5 V to 42 V | — |
| Logic Supply (VCC) | 5 V (internal regulator) | — |
| Operating Mode | Direct PWM or constant-current (SPI-configurable per channel) | — |
| Control Interface | SPI (16-bit messages) | — |
| PWM Mode | Fixed frequency per channel | — |
| Configuración de salida | Low-side (drives external N-MOSFET gates) | — |
| Current Sensing | External shunt resistor | — |
| Diagnostics | Open load, short circuit, overtemperature (per channel) | — |
| Rango de temperatura de funcionamiento | -40 °C to +150 °C (junction) | — |
| Encapsulado | PG-LQFP-64-4 (64-pin LQFP with exposed pad) | PG-TSDSO-24-5 (TSSOP-24 with exposed pad) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | 3 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL rating] |
| Estado RoHS | Compliant | Compliant |
| AEC-Q100 Qualification | Automotive qualified | Yes (automotive grade) |
| Topología | — | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) - configurable |
| Número de salidas | — | 2 (dual channel) |
| Rango de tensión de entrada | — | 4.5 V to 58 V |
| Rango de tensión de salida | — | 2.55 V to 70 V |
| Frecuencia de conmutación | — | 2.2 MHz (typ) |
| Dimming Control | — | Analog and PWM dimming |
| LED Driver Type | — | Non-isolated, DC-DC controller (external MOSFET) |
| Operating Temperature Min | — | -40 C |
| Operating Temperature Max | — | [DATA_NEEDED: max operating temperature] |
| Internal MOSFET | — | No (controller, drives external MOSFET) |
| Protection Features | — | Over-voltage, over-current, open-LED, thermal shutdown (per datasheet) |
| Series | — | LITIX |