TLE82422LXUMA2 vs TLD60992ESXUMA1 Comparaison
Comparaison détaillée côte à côte de TLE82422LXUMA2 par Infineon et TLD60992ESXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
TLE82422LXUMA2 - 8-Ch Low-Side Constant Current Pre-Driver | Infineon
TLE82422LXUMA2 ✓ Actif
Comparaison des spécifications
| Paramètre | TLE82422LXUMA2 | TLD60992ESXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Motor Drivers | LED Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $7,40 | $1,55 |
| Fonction | 8-channel low-side constant-current pre-driver | — |
| Number of Channels | 8 | — |
| Supply Voltage Range (VS) | 5.5 V to 42 V | — |
| Logic Supply (VCC) | 5 V (internal regulator) | — |
| Operating Mode | Direct PWM or constant-current (SPI-configurable per channel) | — |
| Control Interface | SPI (16-bit messages) | — |
| PWM Mode | Fixed frequency per channel | — |
| Configuration de sortie | Low-side (drives external N-MOSFET gates) | — |
| Current Sensing | External shunt resistor | — |
| Diagnostics | Open load, short circuit, overtemperature (per channel) | — |
| Plage de température de fonctionnement | -40 °C to +150 °C (junction) | — |
| Boîtier | PG-LQFP-64-4 (64-pin LQFP with exposed pad) | PG-TSDSO-24-5 (TSSOP-24 with exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 3 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL rating] |
| Statut RoHS | Compliant | Compliant |
| AEC-Q100 Qualification | Automotive qualified | Yes (automotive grade) |
| Topologie | — | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) - configurable |
| Nombre de sorties | — | 2 (dual channel) |
| Plage de tension d'entrée | — | 4.5 V to 58 V |
| Plage de tension de sortie | — | 2.55 V to 70 V |
| Fréquence de commutation | — | 2.2 MHz (typ) |
| Dimming Control | — | Analog and PWM dimming |
| LED Driver Type | — | Non-isolated, DC-DC controller (external MOSFET) |
| Operating Temperature Min | — | -40 C |
| Operating Temperature Max | — | [DATA_NEEDED: max operating temperature] |
| Internal MOSFET | — | No (controller, drives external MOSFET) |
| Protection Features | — | Over-voltage, over-current, open-LED, thermal shutdown (per datasheet) |
| Series | — | LITIX |