TLE94713ESV33XUMA1 vs TLE75004EPDXUMA1 Comparación
Comparación detallada lado a lado de TLE94713ESV33XUMA1 por Infineon y TLE75004EPDXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | TLE94713ESV33XUMA1 | TLE75004EPDXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Voltage Regulators | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $2,31 | $0,93 |
| Product Type | Lite System Basis Chip (Lite SBC) | Low-side power switch |
| Main LDO Output Voltage | 5 V | — |
| Main LDO Output Current | 200 mA (typical) | — |
| Second LDO Output Voltage | 5 V (sensor supply, off-board protected) | — |
| Second LDO Output Current | 100 mA (typical) | — |
| Rango de tensión de entrada | 5.5 V to 28 V (load-dump tolerant) | — |
| CAN Data Rate | Up to 5 Mbps (CAN FD) | — |
| CAN Standard | ISO 11898-1:2015 | — |
| Communication Interface | 16-bit SPI | — |
| Encapsulado | PG-TSDSO-24-1 (TSSOP-24 EP) | PG-TSDSO-14-41 (exposed pad) |
| Rango de temperatura de funcionamiento | -40 C to +125 C (automotive grade) | -40 °C to +150 °C |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | [DATA_NEEDED: MSL rating] | 2A |
| Estado RoHS | Compliant | — |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| Number of Channels | — | 4 |
| On-State Resistance (Rdson) per Channel | — | [DATA_NEEDED: Rdson per channel] |
| Continuous Drain Current per Channel | — | 470 mA |
| Load Voltage (Vbb) | — | [DATA_NEEDED: Vbb max] |
| Número de salidas | — | 4 |
| Input Type | — | SPI (16-bit) + parallel input pins |
| SPI Clock Frequency | — | up to 5 MHz |
| Terminal Finish | — | Tin (Sn) |
| JEDEC / JESD-609 | — | e3 |
| Qualification | — | AEC-Q100 |
| Special Features | — | 3 V cranking, Limp Home (fail-safe) mode, open-load detection |