5962L0423003VXC - 14-Bit 80MSPS ADC | MIL-PRF-38535 Class V | ADI
N.º de pieza: 5962L0423003VXC ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
5962L0423003VXC Descripción general
An analog-to-digital converter (ADC) is a data-conversion integrated circuit that converts a continuous analog input voltage or current into a discrete digital code proportional to the input magnitude. ADCs sit in the data-acquisition signal chain between the analog front end (amplifiers, filters, mixers) and the digital processor (FPGA, DSP, ASIC). Architectural variants include successive-approximation register (SAR), pipeline, flash, sigma-delta, and integrating converters; pipeline ADCs such as the 5962L0423003VXC dominate the 10 MSPS to 250 MSPS mid-speed segment where both sample rate and dynamic range matter. In the broader component taxonomy, the ADC belongs to the data-converter family, itself a subset of signal-conditioning and mixed-signal ICs under the broader power-management and analog-IC hierarchy.
Key features of the 5962L0423003VXC include 14-bit resolution, 80 MHz minimum sample rate, dual 3.3 V/5 V analog supply, single 3.3 V or 5 V digital supply, integrated input buffer and track-and-hold, and LVDS/CMOS-compatible digital outputs. The -55 °C to +125 °C operating-temperature range and radiation-hardened-by-design construction (per the 5962 prefix SMD) make it appropriate for harsh-environment deployments.
The internal architecture is based on a multi-stage pipeline core with proprietary input buffering that maintains distortion performance beyond 200 MHz IF. The hermetic ceramic TQFP-EP package (52 terminals) supports lead-bearing or lead-free finishes, with the EP providing a low-thermal-resistance path for high-temperature derating. On-chip dithering and gain trim yield consistent spurious-free dynamic range (SFDR) across lots, which is critical in radar and electronic-warfare receivers where repeatability under mission profile matters more than absolute best-case numbers.
Typical applications include military radar receivers, electronic-countermeasures (ECM) front ends, software-defined radio (SDR) IF digitizers, satellite-communications (SATCOM) modems, and high-temperature industrial telemetry. The dual-supply topology simplifies interface to legacy 5 V analog signal chains still common in avionics, while the LVDS outputs ease hand-off to modern FPGAs and DACs.
When designing around this part, note that the 52-pin TQFP-EP footprint requires a 4-layer PCB with a continuous ground plane under the exposed pad to meet the stated thermal and EMI performance. Decouple the AVCC and DVCC rails separately with 0.1 µF and 10 µF ceramics placed within 5 mm of each supply pin, and provide a well-bypassed external voltage reference for the best linearity.
This page consolidates distributor stock, MIL-class-V screening documentation, and cross-reference information not found on a single manufacturer datasheet, giving procurement and design engineers a one-stop view of the 5962L0423003VXC for new defense and aerospace programs.
Alternativas directas para 5962L0423003VXC — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
5962L0423003V9A
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
5962L0423003VYC
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
AD6645ASTZ
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
AD6644ASTZ-65
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
5962L0423003VXC Valores máximos y características eléctricas
| Manufacturer | Analog Devices, Inc. |
| Part Status | Active - MIL-PRF-38535 Class V |
| Función | Analog-to-Digital Converter (ADC) |
| Resolución | 14 bit |
| Sample Rate | 80 MSPS (minimum) |
| Number of Channels | 1 |
| Input Type | Differential analog input |
| Data Interface | Parallel CMOS / LVDS compatible |
| Analog Supply Voltage | 3.3 V or 5 V |
| Digital Supply Voltage | 3.3 V or 5 V |
| Rango de temperatura de funcionamiento | -55 °C to +125 °C |
| Encapsulado / Carcasa | 52-TQFP-EP (52 terminals, exposed pad) |
| Tipo de montaje | Surface Mount |
| Screening Level | MIL-PRF-38535 Class V |
| SMD / Drawing Number | 5962L0423003VXC |
| Lead Free / RoHS | Per MIL-PRF-38535 Class V configuration - consult datasheet |
| Architecture | Pipeline ADC (multi-stage) |
| MSL Rating | Per MIL-STD-883 Method 2003 |
Guía de configuración de pines de 5962L0423003VXC 52-tqfp-ep (52 terminals, exposed pad)
Configuración de pines para 5962L0423003VXC (encapsulado 52-tqfp-ep (52 terminals, exposed pad)). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.
No hay datos detallados de patillaje disponibles para 5962L0423003VXC.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
5962L0423003VXC es adecuado para 6 aplicacións: Military Radar IF Sampling, Electronic-Warfare (ECM/ECCM) Receiver, Software-Defined Radio IF Digitizer, Satellite Communications (SATCOM) Modem, High-Temperature Industrial Telemetry, Avionics Signal-Intelligence (SIGINT) Front End.
Military Radar IF Sampling
The 5962L0423003VXC delivers 14-bit resolution at 80 MSPS with MIL-PRF-38535 Class V screening, an exact match for radar IF-sampling chains that must digitize signals above 100 MHz input. In a typical phased-array radar receiver the ADC sits between the down-converting mixer and the FPGA-based pulse compressor, where its 14-bit dynamic range preserves clutter rejection while the Class V screening lets the design pass the radar's full mission-temperature envelope from -55 °C to +125 °C. Wide SFDR across the IF band is the key engineering lever here because it directly bounds the radar's probability of false alarm. Recommended companions: ADL5201 LNA, AD9516 clock generator
Recomendado
Electronic-Warfare (ECM/ECCM) Receiver
Electronic-warfare receivers must digitize extremely wide instantaneous bandwidths while remaining sensitive to low-amplitude threats, and the 5962L0423003VXC's 14-bit dynamic range plus military temperature envelope fits this requirement exactly. Placed at the IF output of the EW tuner, the ADC drives a downstream FPGA running adaptive digital signal-processing algorithms that classify and jam hostile emitters. The Class V qualification lets the EW receiver meet the airborne platform's qualification program without requalifying the converter. Recommended companions: AD9680 high-speed ADC, AD-FMCOMMS FPGA card
Recomendado
Software-Defined Radio IF Digitizer
Software-defined radios benefit from placing the ADC as close as possible to the antenna, and the 5962L0423003VXC is well-suited as the IF digitizer in SDRs targeting HF, VHF, and L-band operation. The 14-bit resolution at 80 MSPS captures sufficient bandwidth for narrow-band demodulation while the parallel CMOS/LVDS output simplifies routing into a Zynq-class SoC. The Class V envelope is a strong fit for portable-manpack SDRs that have to operate between -40 °C and +85 °C without re-calibration across that range. Recommended companions: XC7S50-1CSGA324I, ADL5375 modulator
Recomendado
Satellite Communications (SATCOM) Modem
In SATCOM modems the ADC digitizes the IF chain after the low-noise downconverter, and the 5962L0423003VXC's combination of 14-bit resolution, 80 MSPS, and MIL-class temperature operation is a good match for military SATCOM terminals. Synchronization of the ENCODE clock to a GPS-disciplined reference such as the AD9548 keeps the modem within symbol-rate tolerance across the operational envelope. Wide SFDR protects low-rate QPSK and 16-APSK links against adjacent-channel interference. Recommended companions: AD9548, HMC7044
Recomendado
High-Temperature Industrial Telemetry
Industrial telemetry in oil-well downhole and turbine-engine environments routinely experiences temperatures above +125 °C, and even though the 5962L0423003VXC's upper limit is +125 °C, its derated margin at high temperature is well characterized by the Class V characterization report. Placed on the downhole data-acquisition board, the ADC samples vibration and pressure sensors at 80 MSPS, with the digital output streamed via LVDS to a microcontroller or FPGA. This application values MIL-class screening less for screening and more for the strict per-lot traceability that comes with it. Recommended companions: ADS127L01, ISO1640
Recomendado
Avionics Signal-Intelligence (SIGINT) Front End
Avionics SIGINT receivers must digitize dense RF environments where dynamic range directly translates into interception probability, making the 5962L0423003VXC's 14-bit resolution and 80 MSPS attractive. The Class V screening also satisfies the avionics qualification program typically required for flight-clearance. Driving the ADC output into a Zynq SoC for fast-Fourier and demodulation processing lets the SIGINT back-end run real-time channelization at full mission rate. Recommended companions: XC7Z020-1CLG484I, ADC14DS105AISQ/NOPB
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para 5962L0423003VXC — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | 5962L0423003V9A | 5962L0423003VYC | AD6645ASTZ | AD6644ASTZ-65 |
|---|---|---|---|---|---|
| Package | 52-TQFP-EP | 52-TQFP-EP - same | 52-TQFP-EP - same | 52-LQFP-EP - same footprint | 52-LQFP-EP - same footprint |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Resolution | 14 bit | 14 bit | 14 bit | 14 bit | 14 bit |
| Sample Rate | 80 MSPS | 80 MSPS | 80 MSPS | 80 MSPS | 65 MSPS (-19%) |
| Screening Level | MIL-PRF-38535 Class V | MIL-PRF-38535 Class V | MIL-PRF-38535 Class V | Commercial | Commercial |
| Operating Temperature | -55 to +125 °C | -55 to +125 °C | -55 to +125 °C | -40 to +85 °C | -40 to +85 °C |
| Pin Count | 52 | 52 | 52 | 52 | 52 |
| Architecture | Pipeline | Pipeline | Pipeline | Pipeline | Pipeline |
| Availability (2026-10-12) | Quote-only (Class V) | Quote-only (Class V) | Quote-only (Class V) | Distributor stock | Distributor stock |
Diferenciadores clave
- MIL-PRF-38535 Class V screening with full military temperature envelope (frente a AD6645ASTZ (commercial))
- Guaranteed 80 MSPS minimum sample rate across the military temperature range (frente a AD6644ASTZ-65 (commercial))
- Standardized SMD drawing number for DLA-traceable bills of material (frente a AD6645ASTZ (commercial))
Notas de diseño
The 52-pin TQFP-EP package relies on the exposed pad for low-thermal-resistance heat removal; the EP must be soldered directly to a continuous ground plane with at least 0.5 oz copper. Estimated: with 0.5 oz copper and 9 thermal vias to an inner ground plane, expected theta_JA is around 18 °C/W versus 35 °C/W with no vias, which drops junction rise by ~50 °C at a 1 W internal dissipation. De-rate ADC sample rate if junction temperature approaches +125 °C in a sealed avionics enclosure.
Place one 0.1 µF X7R ceramic within 5 mm of every AVCC pin and a single 10 µF bulk tantalum or polymer cap on each analog rail. Keep the AVCC and DVCC supplies physically separated - use a ferrite bead between the regulator output and AVCC if both are derived from a common rail. Estimated: a 14-bit ADC clocked at 80 MSPS typically draws 250-300 mA on AVCC and 50-80 mA on DVCC; budget for LDO dropout and load-transient response in the regulator selection.
Route the analog differential input (VIN+/-) as a 100 Ω differential pair with matched length within 1 mm to preserve SFDR. Place a balun or transformer coupling immediately at the analog input pins, never after the trace. The ENCODE clock trace must be 50 Ω single-ended and isolated from the analog inputs by at least 4 trace-widths of ground pour. Keep D0-D13 bus traces tightly length-matched (Δt <50 ps) and series-terminated near the ADC outputs.
Do not substitute the commercial AD6645AST for the 5962L0423003VXC on MIL-spec programs - the Class V screening and SMD traceability are contractual requirements and an unauthorized substitution is a counterfeit indicator. Verify the lot's Certificate of Conformance (CoC) and the manufacturer's DLA audit letter before board-level acceptance. If the application is non-military but needs the same electrical performance, AD6645AST in the same 52-LQFP-EP is a lower-cost option without MIL-class screening.
Información de cumplimiento
5962-prefix SMD parts are governed by MIL-PRF-38535 Class V, which takes precedence over RoHS/REACH commercial compliance regimes. Full compliance status depends on the lead-finish option (/VXC vs /V9A vs /VYC); consult the SMD drawing or the manufacturer's CoC for the program-specific finish. AEC-Q100 is not applicable (this is not an automotive part).
