A3P125-2PQ208 - 125K-Gate Flash FPGA | Microchip Technology
N.º de pieza: A3P125-2PQ208 ✓ ActivoA3P125-2PQ208 Descripción general
A field-programmable gate array is a programmable digital semiconductor that integrates configurable logic blocks, programmable interconnect, and I/O resources into one device. Within the broader semiconductor hierarchy, an FPGA belongs to programmable logic devices and provides an alternative to application-specific integrated circuits when design revisions, field updates, or moderate logic density are required. The A3P125 family offers low-density-to-medium-density programmable logic with relatively low total cost of ownership.
The A3P125-2PQ208 provides 125,000 system gates and 3,072 logic cells, with the device listing 133 user I/Os. Its memory resources include up to 144 kbits of true dual-port SRAM, allowing independent simultaneous access for selected data paths. Flash-based configuration permits the programmed configuration to remain in the device without continuous external memory support. The -2 ordering suffix distinguishes this speed-grade variant from other A3P125 options.
The 208-BFQFP package measures 28 x 28 mm, has a 0.50 mm pin pitch, and is approximately 3.40 mm high. The underlying 130 nm CMOS implementation belongs to the ProASIC3 generation and is designed for applications requiring programmable logic, parallel interfaces, control functions, communications glue logic, and optional soft-processor capability. Exact operating voltages, I/O standards, configuration interfaces, and speed ratings are not stated in the retrieved product records and should be confirmed in the manufacturer documentation before design release.
Typical uses include industrial controller logic, communications interfaces, instrumentation, embedded control, and FPGA-assisted system integration. The 208-pin package provides a large pin count for parallel external interfaces, while the 133 user I/Os give designers substantially more attachment flexibility than small-package programmable logic devices. Optional ARM support can help consolidate supervisory and communication routines when the selected device configuration and software toolchain support that feature.
PCB design should treat the 208-lead BFQFP as a fine-pitch component and prioritize clean power distribution, ground-plane continuity, and controlled routing around every bank. Designers should verify the exact bank voltage, supported I/O standards, configuration pins, and decoupling requirements in the ProASIC3 family documentation. The -2 suffix must also be retained during BOM control to avoid unintended speed-grade substitution.
This product page combines the exact package and resource details, practical implementation guidance, structured alternatives, and design trade-offs needed to assess the A3P125-2PQ208. It also distinguishes genuine same-footprint options from devices with smaller packages or different resource counts, helping engineers make package-aware sourcing decisions without assuming that every A3P125 variant is interchangeable.
Alternativas directas para A3P125-2PQ208 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con A3P125-2PQ208 (mismo factor de forma y huella) — difiere en Process Technology, System Gates, Configuration Memory, Device Type, Logic Cells / Logic Blocks.
A3P125-PQ208
✅ Sustitución directaConsulte el precio
Ver hoja de datos →A3P125-PQG208
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
A3P125-2PQG208
✅ Sustitución directaConsulte el precio
Ver hoja de datos →A3P125-PQ208I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →A3P125-FPQ208
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
A3P125-2PQ208 Valores máximos y características eléctricas
| Device Type | ProASIC3 flash-based field-programmable gate array |
| System Gates | 125,000 gates |
| Logic Cells | 3,072 logic cells |
| User I/O Count | 133 I/Os |
| SRAM Capacity | Up to 144 kbits of true dual-port SRAM |
| Embedded Processor Support | Optional soft ARM support |
| Logic Family | CMOS |
| Process Technology | 130 nm |
| Metal Layers | 7 layers |
| Copper Layers | 6 copper layers |
| Configuration Memory | Flash-based |
| Encapsulado | 208-lead BFQFP |
| Recuento de pines | 208 pins |
| Package Body Size | 28 x 28 mm |
| Package Height | 3.40 mm |
| Package Pitch | 0.50 mm |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de A3P125-2PQ208 0.50 mm
Configuración de pines para A3P125-2PQ208 (encapsulado 0.50 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para A3P125-2PQ208.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
A3P125-2PQ208 es adecuado para 6 aplicacións: Industrial Control Logic, Communications Interface Consolidation, Instrumentation Signal Conditioning, Embedded Supervisory Controller, Data Acquisition and Buffering, FPGA-Assisted System Integration.
Industrial Control Logic
The A3P125-2PQ208 fits industrial controller logic that requires persistent configuration, parallel I/O, and moderate programmable logic capacity. Its 3,072 logic cells and 125,000 system gates can consolidate sequencing, state-machine, latch, and interface logic without requiring a separate FPGA for every control function. The 133 user I/Os are useful for connecting sensors, actuators, status indicators, and industrial field buses, while flash-based configuration allows a programmed design to remain operational without an external configuration memory. The 208-lead BFQFP package requires careful routing because its 0.50 mm pitch and 28 x 28 mm body demand stable power distribution, continuous ground planes, and assembly-process controls. Timing closure should use the exact -2 grade and the voltage selected for each I/O bank.
Recomendado
Communications Interface Consolidation
A3P125-2PQ208 can consolidate communications glue logic around a processor or ASIC because it combines 125,000 system gates, 3,072 logic cells, and as many as 144 kbits of true dual-port SRAM. Parallel data paths, status registers, byte-lane handling, and protocol timing can be implemented in programmable logic while the host processor manages higher-level processing. Dual-port SRAM is particularly useful when two clock domains must exchange data with independent access timing. The device should be clocked only after its supplies stabilize, and external interface timing must be checked against the selected I/O voltage and the exact -2 speed-grade limits. A 208-pin package also provides enough physical connections for external memory, transceiver interfaces, and control signals.
Recomendado
Instrumentation Signal Conditioning
The A3P125-2PQ208 is appropriate for programmable instrumentation that performs digital filtering, calibration-table lookup, counting, timing, and data formatting. Its 3,072 logic cells provide a practical logic budget for parallel datapaths and control functions, while the 144-kbit true dual-port SRAM maximum can buffer samples or implement dual-bank storage. Up to 300 family-level user I/Os and 133 user I/Os for the target provide connections to converters, front-end controllers, displays, and communication interfaces. Engineers should assign each external interface to a compatible voltage bank, preserve the required clock topology, and use the device's true dual-port capability when sampling and readout clocks differ. The -2 ordering suffix must remain tied to the validated timing design.
Recomendado
Embedded Supervisory Controller
A3P125-2PQ208 can serve as a supervisory FPGA around an optional soft ARM core, using its logic cells for peripherals, boot coordination, watchdog handling, and inter-processor interfaces. The optional ARM support cited for the ProASIC3 family can reduce external glue logic, while 144 kbits of true dual-port SRAM provides local storage for buffers and handshake registers. The device's 133 user I/Os offer broad connectivity for memory, communication modules, status signals, and supervisory inputs. Design partitioning should keep latency-sensitive functions in hard programmable logic and isolate general-purpose control in the soft-processor region. Before implementation, confirm processor, memory-interface, and toolchain support for the exact A3P125-2PQ208 configuration and verify operating-voltage requirements for every connected external device.
Recomendado
Data Acquisition and Buffering
The A3P125-2PQ208 is suitable for acquiring parallel sensor data and transferring it into a buffer, DSP, processor, or communications engine. Its 133 user I/Os can support wide parallel buses, while up to 144 kbits of true dual-port SRAM can separate acquisition activity from downstream processing. Dual-port memory allows one side to write samples while the other side reads them, which is useful when the source and destination clocks are related but not identical. A design of this type must define stable reset and clock-crossing behavior, constrain the acquisition path for the target speed grade, and account for package-routing delays between the 208-pin device and external components. Flash-based configuration also supports field-retrievable programmable acquisition logic.
Recomendado
FPGA-Assisted System Integration
A3P125-2PQ208 is useful as a system-integration FPGA when several legacy interfaces must be adapted to a modern processor or programmable logic network. Its 125,000 system gates and 3,072 logic cells can host protocol converters, arbitration logic, register remapping, and asynchronous boundary handling, while the 208-lead package exposes enough pins for multiple buses. Optional soft ARM support can add supervisory functionality when the selected ProASIC3 configuration supports it. Integration is most reliable when each I/O bank voltage, direction, termination requirement, and clock source is declared before layout. Engineers should preserve the -2 suffix for timing-sensitive systems and validate any proposed A3P125 family replacement with both static timing analysis and boundary-level hardware tests.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para A3P125-2PQ208 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | A3P125-PQ208 | A3P125-PQG208 | A3P125-2PQG208 | A3P125-PQ208I | A3P125-FPQ208 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 208-BFQFP | 208-BFQFP | 208-BFQFP | 208-BFQFP | 208-BFQFP | 208-BFQFP |
| Speed or Temperature Suffix | -2 speed-grade designation | No -2 suffix | PQG suffix; -2 designation not shown | -2 speed-grade designation | I industrial-temperature suffix; -2 designation not shown | F-prefix ordering code; -2 designation not shown |
Diferenciadores clave
- Preserves the explicit -2 device designation (frente a A3P125-PQ208)
- Same footprint with an industrial-grade alternative (frente a A3P125-PQ208I)
- Same logic resources with an alternate package-ordering code (frente a A3P125-FPQ208)
Notas de diseño
Treat the 208-lead BFQFP as a 0.50 mm-pitch assembly requiring footprint verification against the official package drawing. Place all decoupling capacitors close to their intended power pins, keep supply and ground paths short, and avoid routing high-speed or switching signals beneath the device unless the stack-up and return-path design explicitly allow it. Provide uninterrupted ground-plane coverage and confirm the manufacturer's assembly, solder, and moisture-handling requirements before releasing the board.
Create a complete bank-voltage and I/O-standard plan before assigning the 133 user I/Os. Group compatible external signals into their assigned voltage domains, reserve configuration pins exactly as shown in the official pin-description table, and keep clock inputs away from noisy switching nodes. Because the A3P125 family supports optional soft ARM processing, isolate processor bus and memory routing from sensitive external interfaces where the timing budget permits.
Do not treat every A3P125 ordering suffix as electrically interchangeable. The target A3P125-2PQ208 includes the -2 speed designation, while A3P125-PQ208I includes an industrial-temperature designation and the other listed options use different ordering codes. Validate timing, temperature grade, package documentation, I/O standards, and configuration requirements against the exact replacement. A common 208-pin footprint confirms mechanical compatibility but does not automatically establish identical electrical performance.
Use separate planning for the core supply and each I/O bank because the available records do not state their voltage ranges. Confirm permitted voltage combinations and sequencing in the family documentation, then size the power rails for worst-case static and switching current from the final design rather than from the logic-cell count. Check startup behavior, configuration timing, and power-supply tolerance to avoid marginal operation after rail changes.
Información de cumplimiento
The exact A3P125-2PQ208 compliance and qualification attributes are not stated in the retrieved product records. The ordinary A3P125-2PQ208 ordering code should not be treated as an automotive qualification claim.