A3P250-2FG256 - ProASIC3 FPGA, 36Kb RAM, 256-FPBGA
N.º de pieza: A3P250-2FG256 ✓ ActivoA3P250-2FG256 Descripción general
A ProASIC3 FPGA is a reprogrammable semiconductor in the FPGA and CPLD hierarchy. Its flash configuration memory allows the circuit to be programmed without a separate external configuration PROM, while its programmable logic blocks and block RAM support parallel processing, control, data acquisition, and interface bridging. Unlike a fixed-function ASIC, an FPGA can be revised in hardware to accommodate design changes and field upgrades.
The A3P250-2FG256 combines 157 user I/O with 36 Kb of block RAM in a compact 17 mm × 17 mm 256-FPBGA package. Speed grade 2 identifies its timing-performance class, while the commercial temperature designation targets equipment operating within a 0°C to 85°C junction range. These characteristics make the device suitable for compact embedded systems requiring substantial parallel logic and moderate memory capacity.
Its reprogrammable flash architecture creates a practical alternative to mask-programmed custom logic. Engineers can implement parallel datapaths, state machines, protocol interfaces, and control logic on the same programmable fabric. The 157 available I/O also support integration with external memory, sensors, converters, and communication transceivers, although each design must respect the package-specific pinout and bank constraints described in the manufacturer documentation.
Typical applications include industrial automation, instrumentation, communication equipment, embedded control, data acquisition, and compact control systems. In a data-conversion front end, programmable logic can coordinate sampling, filtering, buffering, and data transfer. In communications equipment, the FPGA can implement protocol conversion, framing, or test logic while retaining the ability to update configuration as interfaces evolve.
PCB implementation should account for the fine-pitch 256-FPBGA geometry, power and ground distribution, decoupling, and thermal dissipation. Follow the manufacturer’s package footprint, pin-definition table, power-supply sequencing, and programming guidance to avoid signal-integrity or assembly problems. Validate timing with the complete system constraints rather than relying on device speed grade alone.
This page combines package, capacity, interface, and application information with a focused engineering comparison of documented ProASIC3 alternatives. It also highlights replacement constraints, commercial sourcing steps, and implementation guidance that help buyers distinguish a true same-footprint migration from a merely similar FPGA.
Alternativas directas para A3P250-2FG256 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con A3P250-2FG256 (mismo factor de forma y huella) — difiere en Package, Process Technology, Configuration Memory, Core Supply Voltage, User I/O.
A3P250-2FG256I
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
A3P250-FG256T
✅ Sustitución directaConsulte el precio
Ver hoja de datos →A3P250-FGG256
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
A3P250-2FG256 Valores máximos y características eléctricas
| Device Type | ProASIC3 flash-based FPGA |
| FPGA Logic Elements | 3 KLE |
| Block RAM | 36 Kb |
| User I/O | 157 I/O |
| Encapsulado | 256-FPBGA |
| Package Dimensions | 17 mm × 17 mm |
| Speed Grade | Grade 2 |
| Temperature Grade | Commercial |
| Temperatura de unión de funcionamiento | 0°C to 85°C |
| Configuration Memory | Reprogrammable flash |
| Architecture | Single-chip FPGA |
| Tipo de montaje | Surface mount |
| Process Technology | 130 nm flash-based CMOS |
| Metal Layers | 7 layers (6 copper) |
| Instant-On Level 0 Support | Supported |
Guía de configuración de pines de A3P250-2FG256 17 mm × 17 mm
Configuración de pines para A3P250-2FG256 (encapsulado 17 mm × 17 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para A3P250-2FG256.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
A3P250-2FG256 es adecuado para 6 aplicacións: Industrial Automation Controllers, Data Acquisition Systems, Communication Protocol Conversion, Embedded Control and Instrumentation, Video and Image Processing, Low-Power Embedded Logic.
Industrial Automation Controllers
The A3P250-2FG256 fits compact industrial automation controllers that coordinate sensors, actuators, interlocks, and motion-control sequences. Its 3 KLE programmable fabric can implement parallel state machines, while 36 Kb of block RAM provides space for command queues, event histories, and local data buffers. The 157 user I/O reduce the need for external interface logic when connecting digital I/O, converters, and field-bus transceivers. The commercial 0°C to 85°C junction range suits indoor equipment, provided the enclosure and thermal design keep the junction within that limit.
Recomendado
Data Acquisition Systems
The A3P250-2FG256 is suitable for coordinating data acquisition across multiple sensors, converters, and communication links. Its programmable logic can implement sampling control, digital filtering, packet assembly, and transfer sequencing, while the 36 Kb block RAM can buffer samples or frames between acquisition and processing stages. With 157 I/O, the device can connect parallel buses, serial transceivers, and control signals while implementing timing logic in the FPGA. Designs should include proper input conditioning, clock jitter control, and synchronization across sampling channels.
Recomendado
Communication Protocol Conversion
The A3P250-2FG256 can bridge incompatible communication formats by running framing, buffering, and protocol conversion logic in parallel. The 36 Kb of block RAM supports packet staging and flow control, while 157 I/O provide connections to serial transceivers, parallel processors, and control peripherals. Flash-based configuration permits field updates when interface requirements change. Engineers should verify input timing, I/O voltage compatibility, transceiver turnaround timing, and protocol-specific latency before deployment, particularly when the FPGA interfaces to an external microcontroller or processor.
Recomendado
Embedded Control and Instrumentation
The A3P250-2FG256 is well suited to instrument-control logic that must combine timing generation, calibration tables, status monitoring, and operator-interface handling. Its 3 KLE fabric can execute multiple control tasks concurrently, and 36 Kb of block RAM can hold calibration coefficients, measurement snapshots, and communication buffers. The 157 I/O allow direct connection to sensors, display drivers, relays, and converters. For laboratory or process instrumentation, preserve the specified 0°C to 85°C junction range and use the industrial ordering where the installation environment requires wider qualification.
Recomendado
Video and Image Processing
The A3P250-2FG256 can implement compact parallel pipelines for pixel processing, timing generation, synchronization, and interface adaptation. Its 3 KLE fabric and 36 Kb of block RAM are appropriate for low-resolution image acquisition, test-pattern generation, and embedded preprocessing rather than unrestricted high-resolution video pipelines. The 157 I/O provide parallel connections to image sensors, frame-buffer devices, and display interfaces. Design work should include line-rate timing analysis, color or bit-depth handling, and board-level signal-integrity checks on high-speed data paths.
Recomendado
Low-Power Embedded Logic
The A3P250-2FG256 provides programmable logic, 36 Kb of block RAM, and 157 I/O without requiring a separate configuration PROM because ProASIC3 devices use onboard reprogrammable flash. This integration can simplify compact control systems by reducing the number of board-level devices and assembly operations. The 130 nm flash-based CMOS process is established for the ProASIC3 family, making this device useful where reprogrammability and design revision are more important than cutting-edge process density. System power should be evaluated across active logic, I/O activity, and programming or configuration states.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para A3P250-2FG256 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | A3P250-2FG256I | A3P250-FG256 | A3P250-FGG256 |
|---|---|---|---|---|
| Package | 256-FPBGA | 256-FPBGA | 256-LBGA | 256-LBGA |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Block RAM | 36 Kb | 36 Kb | 36,864 Kbit | 36,864 Kbit |
| User I/O | 157 I/O | 157 I/O | 157 I/O | 157 I/O |
| Configuration Memory | Reprogrammable flash | Reprogrammable flash | ProASIC3 flash-based FPGA | ProASIC3 flash-based FPGA |
| Process Technology | 130 nm flash-based CMOS | 130 nm flash-based CMOS | ProASIC3 family process | ProASIC3 family process |
Diferenciadores clave
- Explicit speed-grade and commercial-temperature ordering (frente a A3P250-FG256)
- Commercial-grade version with a documented exact temperature range (frente a A3P250-2FG256I)
- Explicit speed grade and memory capacity in the target ordering (frente a A3P250-FGG256)
- High I/O density in the 256-ball package (frente a A3P250-2FG256I)
Notas de diseño
Use the exact 256-FPBGA land pattern and ball map from the manufacturer documentation rather than assigning pins from a generic 256-ball BGA library. Separate power and ground planes, place decoupling capacitors at the associated supply balls, and route high-speed clocks and interfaces away from noisy switching nodes. The fine-pitch package also requires assembly-process and solder-mask compatibility to be reviewed before fabrication release.
Plan the power tree for normal operation, configuration, and I/O-load states rather than estimating dissipation from logic utilization alone. The A3P250 family uses a 130 nm flash-based CMOS process, so configure unused I/O to benign states and verify external pull-up or pull-down networks. Use the manufacturer’s recommended supply topology and decoupling values to prevent supply droop, excessive inrush, or unstable configuration behavior.
Estimate junction temperature using the actual FPGA power, package thermal characteristics, board copper, airflow, and neighboring heat sources. Keep the commercial device within its specified 0°C to 85°C junction range. For harsher ambient conditions or dense board placement, use the industrial A3P250-2FG256I ordering and validate the assembled product under worst-case operating conditions rather than relying on ambient temperature alone.
Constrain clock inputs, external memories, and high-speed I/O according to the family timing and board-design guidance. Use matched routing where source-synchronous interfaces are involved, add series damping where required by the interface standard, and validate setup and hold behavior with realistic external-device timing. When changing to A3P250-FG256 or A3P250-FGG256, rerun timing analysis because the suffix-specific speed grade is not explicit in the available listing.
Do not treat every A3P250 ordering as electrically and commercially identical. The -2 suffix specifies speed grade 2, the I suffix identifies the industrial-temperature ordering, and FG versus FGG can encode additional qualification or package characteristics. Confirm the full ordering code, temperature grade, package marking, timing class, and programming requirements before substitution or production release.
Información de cumplimiento
Compliance status was not stated in the product information. The commercial A3P250-2FG256 is not presented as an automotive-qualified ordering.