Microchip Technology

A3P250-2FG256 - ProASIC3 FPGA, 36Kb RAM, 256-FPBGA

MPN: A3P250-2FG256 ✓ 啟用中
256-FPBGA Package Grade 2 Speed Reprogrammable flash Memory
MOQ: 1 |

A3P250-2FG256 概覽

The Microchip Technology A3P250-2FG256 is a ProASIC3 flash-based field-programmable gate array in a 256-FPBGA package, with 157 I/O, 36 Kb of block RAM, speed grade 2, and a commercial junction-temperature range of 0°C to 85°C. The device supports programmable logic, embedded memory, and reconfigurable I/O within a single package.

A ProASIC3 FPGA is a reprogrammable semiconductor in the FPGA and CPLD hierarchy. Its flash configuration memory allows the circuit to be programmed without a separate external configuration PROM, while its programmable logic blocks and block RAM support parallel processing, control, data acquisition, and interface bridging. Unlike a fixed-function ASIC, an FPGA can be revised in hardware to accommodate design changes and field upgrades.

The A3P250-2FG256 combines 157 user I/O with 36 Kb of block RAM in a compact 17 mm × 17 mm 256-FPBGA package. Speed grade 2 identifies its timing-performance class, while the commercial temperature designation targets equipment operating within a 0°C to 85°C junction range. These characteristics make the device suitable for compact embedded systems requiring substantial parallel logic and moderate memory capacity.

Its reprogrammable flash architecture creates a practical alternative to mask-programmed custom logic. Engineers can implement parallel datapaths, state machines, protocol interfaces, and control logic on the same programmable fabric. The 157 available I/O also support integration with external memory, sensors, converters, and communication transceivers, although each design must respect the package-specific pinout and bank constraints described in the manufacturer documentation.

Typical applications include industrial automation, instrumentation, communication equipment, embedded control, data acquisition, and compact control systems. In a data-conversion front end, programmable logic can coordinate sampling, filtering, buffering, and data transfer. In communications equipment, the FPGA can implement protocol conversion, framing, or test logic while retaining the ability to update configuration as interfaces evolve.

PCB implementation should account for the fine-pitch 256-FPBGA geometry, power and ground distribution, decoupling, and thermal dissipation. Follow the manufacturer’s package footprint, pin-definition table, power-supply sequencing, and programming guidance to avoid signal-integrity or assembly problems. Validate timing with the complete system constraints rather than relying on device speed grade alone.

This page combines package, capacity, interface, and application information with a focused engineering comparison of documented ProASIC3 alternatives. It also highlights replacement constraints, commercial sourcing steps, and implementation guidance that help buyers distinguish a true same-footprint migration from a merely similar FPGA.

直接替換替代品,適用於 A3P250-2FG256 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: A3P250-2FG256 (相同外形與佔位) — 差異在於 Package, Process Technology, Configuration Memory, Core Supply Voltage, User I/O.

Microchip Technology
Package: 256-LBGA, 17 mm × 17 mm
Process Technology: 130 nm CMOS
Core Supply Voltage: 1.425 V to 1.575 V
比較對象 A3P250-2FG256 →
Microchip Technology
Package: 256-FBGA (FG256)
Process Technology: 130 nm
Configuration Memory: On-chip Flash (nonvolatile)
比較對象 A3P250-2FG256 →

A3P250-2FG256I

✅ 直接替換
📦 256-FPBGA
Same A3P250 family and 256-ball format; industrial temperature qualification replaces the commercial 0°C to 85°C junction-temperature class

📋 參考替代品(不在目錄中)

A3P250-FG256T

✅ 直接替換
Microchip Technology
📦 256-FPBGA
ProASIC3 · 250000 gates · 231 MHz · 130 nm · 1.5 V · 157 · 36864 bits · 256-FBGA (FG256)

聯絡詢價

查看資料表 →

A3P250-FGG256

✅ 直接替換
📦 256-FPBGA
Same 157 I/O and 36 Kb block RAM in a 256-LBGA listing; suffix-specific speed, temperature, and qualification details differ from the -2 ordering

📋 參考替代品(不在目錄中)

A3P250-2FG256 最大額定值與電氣特性

Device Type ProASIC3 flash-based FPGA
FPGA Logic Elements 3 KLE
Block RAM 36 Kb
User I/O 157 I/O
封裝 256-FPBGA
Package Dimensions 17 mm × 17 mm
Speed Grade Grade 2
Temperature Grade Commercial
工作接面溫度 0°C to 85°C
Configuration Memory Reprogrammable flash
Architecture Single-chip FPGA
安裝類型 Surface mount
Process Technology 130 nm flash-based CMOS
Metal Layers 7 layers (6 copper)
Instant-On Level 0 Support Supported

A3P250-2FG256 17 mm × 17 mm 腳位配置指南

A3P250-2FG256(17 mm × 17 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

A3P250-2FG256 的 17 mm × 17 mm 封裝腳位圖

無詳細腳位定義資料: A3P250-2FG256.

請參閱 資料表 以查看完整腳位配置。

典型應用

A3P250-2FG256 適用於 6 應用s: Industrial Automation Controllers, Data Acquisition Systems, Communication Protocol Conversion, Embedded Control and Instrumentation, Video and Image Processing, Low-Power Embedded Logic.

🏭

Industrial Automation Controllers

The A3P250-2FG256 fits compact industrial automation controllers that coordinate sensors, actuators, interlocks, and motion-control sequences. Its 3 KLE programmable fabric can implement parallel state machines, while 36 Kb of block RAM provides space for command queues, event histories, and local data buffers. The 157 user I/O reduce the need for external interface logic when connecting digital I/O, converters, and field-bus transceivers. The commercial 0°C to 85°C junction range suits indoor equipment, provided the enclosure and thermal design keep the junction within that limit.

📊

Data Acquisition Systems

The A3P250-2FG256 is suitable for coordinating data acquisition across multiple sensors, converters, and communication links. Its programmable logic can implement sampling control, digital filtering, packet assembly, and transfer sequencing, while the 36 Kb block RAM can buffer samples or frames between acquisition and processing stages. With 157 I/O, the device can connect parallel buses, serial transceivers, and control signals while implementing timing logic in the FPGA. Designs should include proper input conditioning, clock jitter control, and synchronization across sampling channels.

🌐

Communication Protocol Conversion

The A3P250-2FG256 can bridge incompatible communication formats by running framing, buffering, and protocol conversion logic in parallel. The 36 Kb of block RAM supports packet staging and flow control, while 157 I/O provide connections to serial transceivers, parallel processors, and control peripherals. Flash-based configuration permits field updates when interface requirements change. Engineers should verify input timing, I/O voltage compatibility, transceiver turnaround timing, and protocol-specific latency before deployment, particularly when the FPGA interfaces to an external microcontroller or processor.

🔧

Embedded Control and Instrumentation

The A3P250-2FG256 is well suited to instrument-control logic that must combine timing generation, calibration tables, status monitoring, and operator-interface handling. Its 3 KLE fabric can execute multiple control tasks concurrently, and 36 Kb of block RAM can hold calibration coefficients, measurement snapshots, and communication buffers. The 157 I/O allow direct connection to sensors, display drivers, relays, and converters. For laboratory or process instrumentation, preserve the specified 0°C to 85°C junction range and use the industrial ordering where the installation environment requires wider qualification.

📺

Video and Image Processing

The A3P250-2FG256 can implement compact parallel pipelines for pixel processing, timing generation, synchronization, and interface adaptation. Its 3 KLE fabric and 36 Kb of block RAM are appropriate for low-resolution image acquisition, test-pattern generation, and embedded preprocessing rather than unrestricted high-resolution video pipelines. The 157 I/O provide parallel connections to image sensors, frame-buffer devices, and display interfaces. Design work should include line-rate timing analysis, color or bit-depth handling, and board-level signal-integrity checks on high-speed data paths.

⚡

Low-Power Embedded Logic

The A3P250-2FG256 provides programmable logic, 36 Kb of block RAM, and 157 I/O without requiring a separate configuration PROM because ProASIC3 devices use onboard reprogrammable flash. This integration can simplify compact control systems by reducing the number of board-level devices and assembly operations. The 130 nm flash-based CMOS process is established for the ProASIC3 family, making this device useful where reprogrammability and design revision are more important than cutting-edge process density. System power should be evaluated across active logic, I/O activity, and programming or configuration states.

推薦產品摘要

A3P250-2FG256I Industrial-temperature ordering for the same A3P250 family and 256-ball footprint 用於: Industrial Automation Controllers, Communication Protocol Conversion, Embedded Control and Instrumentation, Low-Power Embedded Logic A3P250-FG256 Microchip Technology 用於: Industrial Automation Controllers, Data Acquisition Systems, Embedded Control and Instrumentation, Video and Image Processing, Low-Power Embedded Logic A3P250-FGG256 Same-family 256-ball configuration for custom acquisition and processing logic 用於: Data Acquisition Systems, Communication Protocol Conversion, Video and Image Processing
What are the key specifications of A3P250-2FG256 that engineers should know?
The A3P250-2FG256 is a ProASIC3 flash-based FPGA with 3 KLE, 36 Kb of block RAM, and 157 user I/O in a 256-FPBGA package. According to the Microchip A3P250 family documentation, it uses a 130 nm flash-based CMOS process with seven metal layers, including six copper layers. The specified device is speed grade 2 and commercial grade, with a 0°C to 85°C junction-temperature range. Its 17 mm × 17 mm package provides a practical combination of logic, memory, and I/O for compact control, instrumentation, and communication designs.
Where can I download the A3P250-2FG256 datasheet PDF?
The A3P250-2FG256 datasheet can be obtained through the linked A3P250 documentation or the manufacturer product page for the ProASIC3 family. The manufacturer identifies A3P250 as part of the ProASIC3 low-density FPGA product line, while the A3P250 datasheet provides the family-level architecture, configuration, electrical, package, and programming information needed to assess the exact suffix. Use the pin-definition and package tables for the FG256 variant when assigning PCB nets, and request the current commercial quotation through the Request a Quote form on this page.
Where can I find the A3P250-2FG256 pinout?
The A3P250-2FG256 pinout is documented in the Microchip A3P250 family datasheet and its associated package pin tables. The device uses a 256-FPBGA package, so the schematic and layout must follow the exact FG256 ball map rather than a generic BGA symbol. Pay particular attention to configuration pins, power and ground balls, clock inputs, user I/O, and any dedicated programming or test functions. The device is surface mounted and requires a fine-pitch assembly process, making complete ball assignment and manufacturing review essential before release.
What is the A3P250-2FG256 and what is a ProASIC3 FPGA used for?
The A3P250-2FG256 is a reprogrammable ProASIC3 FPGA with 3 KLE, 36 Kb of block RAM, and 157 user I/O. A ProASIC3 FPGA integrates programmable logic and embedded block RAM with onboard flash configuration memory. It is commonly used for parallel control, datapath processing, protocol handling, data acquisition, and system bridging. Unlike a fixed-function ASIC, the flash-based design can be reprogrammed when engineering changes or field updates are required.
How much block RAM and I/O does the A3P250-2FG256 provide?
The A3P250-2FG256 provides 36 Kb of block RAM and 157 user I/O. According to the Microchip product description, the A3P250 family also supports configurations reaching 144 Kbits of true dual-port SRAM and up to 300 user I/O, but those family maxima must not be confused with the values for this exact device. The exact 36 Kb RAM capacity is the relevant figure when sizing buffers, lookup tables, packet stores, or acquisition pipelines in a specific design.
What temperature range and speed grade apply to the A3P250-2FG256?
The A3P250-2FG256 is specified as speed grade 2 with a commercial junction-temperature range of 0°C to 85°C. The “-2” portion of the ordering code identifies the speed grade, while the absence of the industrial “I” suffix distinguishes this ordering from A3P250-2FG256I. Confirm the exact temperature grade when comparing this commercial device with A3P250-2FG256I. Also validate worst-case timing across the complete 0°C to 85°C junction range rather than relying only on typical performance.
What can replace the A3P250-2FG256 on the same PCB footprint?
The closest documented same-footprint choices are A3P250-2FG256I, A3P250-FG256, and A3P250-FGG256, all from the same A3P250 family and offered in 256-ball package variants. Their suitability depends on whether the replacement retains the required 157 I/O, 36 Kb block RAM, configuration method, speed grade, and temperature class. A3P250-2FG256I changes the temperature qualification; the FG256 and FGG256 orderings require suffix-level verification for speed, temperature, and package qualification. Treat each as a conditional migration rather than an unconditional substitute.
Is A3P250-2FG256I the same as A3P250-2FG256?
No, the primary ordering difference is temperature grade. The A3P250-2FG256 is a commercial-grade device with a specified 0°C to 85°C junction range, while A3P250-2FG256I is the industrial-temperature ordering in the same A3P250 family. Their 256-ball format supports the same-footprint migration path, but the industrial part should be selected when the assembly environment exceeds the commercial qualification range. Confirm pin, RAM, I/O, and speed details against the manufacturer documentation before substitution.
A3P250-2FG256 vs A3P250-FG256: which is better for a new design?
Choose A3P250-2FG256 when the design specifically requires the documented speed grade 2 and commercial 0°C to 85°C junction-temperature range. A3P250-FG256 retains the A3P250 family identity, 157 I/O, and 36 Kb block RAM in a 256-LBGA listing, but its suffix does not explicitly identify speed grade 2. For a new commercial design, A3P250-2FG256 is the clearer ordering choice; for an existing design, confirm whether the original assembly used the standard-speed suffix and whether any timing constraints permit the change.
When should I choose A3P250-2FG256 over another A3P250 package variant?
Choose A3P250-2FG256 when the board requires the 256-FPBGA footprint, 157 user I/O, 36 Kb of block RAM, speed grade 2, and commercial temperature operation. Smaller packages should be considered when pin count and memory capacity permit; larger A3P250 options should be considered when additional logic, memory, or I/O is required. Because changing package size can alter every BGA ball assignment, treat A3P250 as a family search term rather than a drop-in replacement list.
Is the A3P250-2FG256 suitable for industrial control and automation systems?
The A3P250-2FG256 is suitable for industrial control designs operating within its specified 0°C to 85°C junction-temperature range. Its programmable logic can implement state machines, sequencing, and parallel control functions, while 36 Kb of block RAM supports local buffering and 157 I/O supports integration with sensors, converters, and field-bus transceivers. For installations with wider environmental exposure, choose the industrial A3P250-2FG256I ordering and verify its complete operating limits.
Where can I buy A3P250-2FG256 online?
Use the Request a Quote form on this page to request A3P250-2FG256 pricing, stock, and lead time for your required quantity and packaging. The form provides a direct purchasing path without requiring static prices that can become outdated. Include the desired package quantity, date code requirements, target delivery date, and whether a programmed or programmed-and-tested configuration is required so the supplier can confirm the correct commercial response.
What is the price of A3P250-2FG256?
Current A3P250-2FG250 pricing, stock, and lead time are handled through the Request a Quote form on this page. Request a quote for the exact quantity, delivery schedule, and packaging format needed for production. No fixed price figure is stated because programmable-device pricing can depend on volume, date code, programming, and fulfillment conditions. Provide those project details with the request to obtain an actionable commercial response.
What is the lead time for A3P250-2FG256?
The current lead time for A3P250-2FG256 should be confirmed through the Request a Quote form on this page. Include your required quantity, approved vendor list, schedule date, and any programming or traceability requirements. Lead time may vary with order quantity and supply conditions, so plan the request before committing the production schedule. The form allows the supplier to return availability and timing for the specific commercial order rather than presenting an unverified estimate.
Is A3P250-2FG256 in stock?
A3P250-2FG256 stock status should be checked through the Request a Quote form on this page. Submit the required quantity, package format, target shipment date, and any date-code or inspection requirements to receive a current availability confirmation. Static stock indications can change rapidly for programmable logic devices, so an order-specific response is more useful than a generic in-stock or out-of-stock statement.
What is the best cross-brand equivalent for the A3P250-2FG256?
No cross-brand drop-in equivalent is established for the A3P250-2FG256. Cross-brand FPGA substitutions require more than matching a 256-ball package because programmable logic, configuration memories, I/O standards, memory architecture, and timing performance differ. The documented alternatives are same-brand A3P250 variants, which simplifies migration validation. For a cross-brand redesign, compare I/O count, embedded memory, configuration interface, clocking, voltage standards, package ballout, IP support, and the required development tools before treating any device as equivalent.

工程參考資料,適用於 A3P250-2FG256 — 比較、設計指引及合規資訊。

選型指南

Choose the A3P250-2FG256 for a new commercial design that explicitly requires speed grade 2, 36 Kb of block RAM, 157 I/O, and the 256-FPBGA footprint. It is the clearest option when system timing targets depend on the documented grade-2 designation and the operating junction range of 0°C to 85°C is acceptable. Select A3P250-2FG256I when the same electrical platform is needed in an industrial-temperature environment; its primary distinction is qualification rather than logic or I/O capacity. Consider A3P250-FG256 or A3P250-FGG256 for an existing A3P250 assembly, but verify their suffix-specific speed and temperature details because the available listings do not explicitly identify grade 2. Do not use smaller A3P250 packages without a full PCB and pinout review, and do not assume a cross-brand FPGA is drop-in compatible. For any alternative, rerun timing, power, thermal, configuration, and package checks before release.

與替代品比較

參數 本產品 A3P250-2FG256I A3P250-FG256 A3P250-FGG256
Package 256-FPBGA 256-FPBGA 256-LBGA 256-LBGA
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Block RAM 36 Kb 36 Kb 36,864 Kbit 36,864 Kbit
User I/O 157 I/O 157 I/O 157 I/O 157 I/O
Configuration Memory Reprogrammable flash Reprogrammable flash ProASIC3 flash-based FPGA ProASIC3 flash-based FPGA
Process Technology 130 nm flash-based CMOS 130 nm flash-based CMOS ProASIC3 family process ProASIC3 family process

主要差異化特點

  • Explicit speed-grade and commercial-temperature ordering (對比A3P250-FG256)
  • Commercial-grade version with a documented exact temperature range (對比A3P250-2FG256I)
  • Explicit speed grade and memory capacity in the target ordering (對比A3P250-FGG256)
  • High I/O density in the 256-ball package (對比A3P250-2FG256I)

設計說明

Use the exact 256-FPBGA land pattern and ball map from the manufacturer documentation rather than assigning pins from a generic 256-ball BGA library. Separate power and ground planes, place decoupling capacitors at the associated supply balls, and route high-speed clocks and interfaces away from noisy switching nodes. The fine-pitch package also requires assembly-process and solder-mask compatibility to be reviewed before fabrication release.

Plan the power tree for normal operation, configuration, and I/O-load states rather than estimating dissipation from logic utilization alone. The A3P250 family uses a 130 nm flash-based CMOS process, so configure unused I/O to benign states and verify external pull-up or pull-down networks. Use the manufacturer’s recommended supply topology and decoupling values to prevent supply droop, excessive inrush, or unstable configuration behavior.

Estimate junction temperature using the actual FPGA power, package thermal characteristics, board copper, airflow, and neighboring heat sources. Keep the commercial device within its specified 0°C to 85°C junction range. For harsher ambient conditions or dense board placement, use the industrial A3P250-2FG256I ordering and validate the assembled product under worst-case operating conditions rather than relying on ambient temperature alone.

Constrain clock inputs, external memories, and high-speed I/O according to the family timing and board-design guidance. Use matched routing where source-synchronous interfaces are involved, add series damping where required by the interface standard, and validate setup and hold behavior with realistic external-device timing. When changing to A3P250-FG256 or A3P250-FGG256, rerun timing analysis because the suffix-specific speed grade is not explicit in the available listing.

Do not treat every A3P250 ordering as electrically and commercially identical. The -2 suffix specifies speed grade 2, the I suffix identifies the industrial-temperature ordering, and FG versus FGG can encode additional qualification or package characteristics. Confirm the full ordering code, temperature grade, package marking, timing class, and programming requirements before substitution or production release.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

Compliance status was not stated in the product information. The commercial A3P250-2FG256 is not presented as an automotive-qualified ordering.

資料驗證日期: 2026-11-08 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

a3p250 pqg208i a3p250 vqg100 a3p250 pqg208 a3p250 fgg256 a3p250 fgg256i a3p250 1vqg100m A3P250-2FG256 datasheet A3P250-2FG256 pinout A3P250-2FG256 equivalent A3P250-2FG256 replacement A3P250-2FG256 price A3P250-2FG256 stock Microchip Technology A3P250-2FG256 A3P250-2FG256 vs A3P250-2FG256I

相關元件與詞彙

Microchip Technology A3P250-2FG256 A3P250-2FG256I A3P250-FG256 A3P250-FGG256 ProASIC3 FPGA field-programmable gate array CPLD programmable logic flash-based CMOS 130 nm process reprogrammable flash block RAM 3 KLE 157 user I/O 256-FPBGA BGA package surface mount speed grade 2 industrial control data acquisition protocol conversion instrumentation RoHS REACH
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情