Analog Devices

AD600JR - Dual 35MHz Variable Gain Amplifier | Analog Devices

N.º de pieza: AD600JR ✓ Activo
16-lead SOIC Package
MOQ: 1 |

AD600JR Descripción general

The Analog Devices AD600JR is a dual-channel variable gain amplifier optimized for ultrasound imaging and other precision signal-chain applications. Each channel provides independent gain control, a bandwidth of up to 35 MHz, a slew rate of 275 V/µs, low input noise of 1.4 nV/√Hz, and gain accuracy of 0.3 dB. The device is packaged in a 16-lead SOIC.

A variable gain amplifier, or VGA, is a specialized amplifier that changes its signal gain under electronic control while preserving signal quality. Within the broader hierarchy, a VGA belongs to the amplifier-IC and analog-signal-processing categories. It is commonly used where received or sensed signals occupy a wide amplitude range and must be normalized before digitization, amplification, or further processing.

The AD600 offers two gain ranges extending to +30 dB and a gain response that is linear in decibels. Independent control allows the two channels to process separate signals or to support differential architectures. Its 35 MHz small-signal bandwidth provides useful bandwidth for ultrasound receiver systems, while the 1.4 nV/√Hz input-noise figure supports low-amplitude analog front ends. The specified 0.3 dB absolute-gain accuracy and low distortion of −60 dBc at a 1 V output address systems requiring predictable amplitude transfer.

Internally, each channel combines a gain-control mechanism with an analog signal path designed for wide bandwidth and rapid large-signal response. The 275 V/µs slew rate helps preserve waveform shape when gain changes or when large signals appear at the output. Stable operation into the specified load and clean signal reproduction are important when the amplifier is placed between a transducer or sensor and a downstream converter.

Typical applications include ultrasound imaging receiver channels, medical diagnostic instrumentation, communications signal conditioning, industrial measurement systems, and precision test equipment. Two independent amplifier channels can simplify board partitioning when two echoes, sensors, or frequency bands require separate gain settings. The device is especially relevant where bandwidth, noise, gain accuracy, and control range must be balanced in a compact analog package.

Designers should pay close attention to gain-control implementation, power-supply bypassing, grounding, and output loading. Keep the gain-control path physically short and decouple supply pins close to the device to prevent high-frequency feedback. Confirm the complete pin assignment and recommended application circuit in the manufacturer datasheet before laying out the board, and verify the output-load requirements for the selected gain range.

This product summary combines the manufacturer family information with practical guidance for evaluating bandwidth, noise, gain accuracy, package reuse, and replacement decisions. It also identifies where application-specific verification remains necessary, helping engineers narrow the design without overlooking the constraints of a 16-lead dual-channel VGA.

Alternativas directas para AD600JR — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con AD600JR (mismo factor de forma y huella) — difiere en Product Type, Signal Type, Total Harmonic Distortion.

Analog Devices
Product Type: Dual variable gain amplifier
Signal Type: Dual analog input and output signal channels
Comparar con AD600JR →
Analog Devices
Signal Type: Analog
Total Harmonic Distortion: -60 dBc THD at 1 V output
Comparar con AD600JR →

AD600ARZ

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Analog Devices
📦 16-lead SOIC
Variable Gain Amplifier · 2 channels · 35 MHz · 0 dB to +40 dB · 275 V/µs · ±4.75 V to ±5.25 V · -40 °C to +85 °C · Industrial

Consulte el precio

Ver hoja de datos →

AD602JR

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Analog Devices
📦 16-lead SOIC
2 channels · 2 independent gain-control channels · -10 dB to +30 dB · Linear in dB · 0.3 dB accurate absolute gain · 1.4 nV/√Hz · 35 MHz · -60 dBc THD at 1 V output

Consulte el precio

Ver hoja de datos →

AD602ARZ

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Analog Devices
📦 16-lead SOIC
Dual variable gain amplifier · 2 channels · 2 independent channels · 11.25 dB to 31 dB per channel · Low-noise architecture · Wideband · Dual analog input and output signal channels · Ultrasound imaging

Consulte el precio

Ver hoja de datos →

AD600JR Valores máximos y características eléctricas

Product Type Dual-channel variable gain amplifier
Channel Count 2 channels
Gain Control Independent control for each channel
Maximum Gain Range +30 dB
Gain Response Linear in dB
Absolute Gain Accuracy 0.3 dB
Input Noise Density 1.4 nV/√Hz
Small-Signal Bandwidth 35 MHz at −3 dB
Slew Rate 275 V/µs
Total Harmonic Distortion −60 dBc at 1 V output
Encapsulado 16-lead SOIC
Tipo de montaje Surface mount
Rango de temperatura de funcionamiento 0°C to 70°C

Guía de configuración de pines de AD600JR 16-lead soic

Configuración de pines para AD600JR (encapsulado 16-lead soic). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 16-lead soic para AD600JR

No hay datos detallados de patillaje disponibles para AD600JR.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

AD600JR es adecuado para 6 aplicacións: Ultrasound Imaging Receiver Channels, Medical Diagnostic Signal Conditioning, Communications Signal Conditioning, Industrial Measurement Systems, Precision Test and Measurement, Automatic Gain Control Systems.

💊

Ultrasound Imaging Receiver Channels

The AD600JR fits dual-channel ultrasound receiver front ends because each channel provides independent gain control, bandwidth to 35 MHz, and an absolute-gain accuracy of 0.3 dB. Two channels can process separate echo paths or support differential signal conditioning close to the transducer interface. The 1.4 nV/√Hz input-noise specification is valuable for weak acoustic echoes, while the −60 dBc distortion figure at a 1 V output helps preserve waveform integrity. The circuit should be placed near the front end, with short gain-control traces, local supply bypassing, and a continuous ground plane. Confirm the required gain range and exact transfer characteristic against the manufacturer gain-control curves before finalizing the receive-chain calibration.

💊

Medical Diagnostic Signal Conditioning

The AD600JR can condition low-level physiological signals where accurate, controlled amplification is required. Its 0.3 dB absolute-gain accuracy provides a defined basis for amplitude calibration, while the linear-in-dB response simplifies control-law implementation across changing signal levels. The dual-channel arrangement is useful for paired sensor inputs, reference channels, or differential measurement paths. The 1.4 nV/√Hz input-noise density supports high-impedance analog front ends, provided the sensor impedance and grounding are compatible with the amplifier. Use the manufacturer datasheet to verify input range, common-mode limits, supply voltage, and output swing, and evaluate noise at the bandwidth required by the diagnostic instrument rather than over an unnecessarily broad spectrum.

🌐

Communications Signal Conditioning

The AD600JR is applicable to communications receivers that need adjustable gain before filtering, detection, or digitization. Independent control of its two channels supports separate paths for carrier and sideband information, or paired amplification stages within a balanced architecture. The 35 MHz bandwidth provides useful signal range for many intermediate-frequency and baseband chains, while the 275 V/µs slew rate improves large-signal response. The absolute-gain accuracy of 0.3 dB supports consistent amplitude control, although system-level distortion also depends on frequency, gain setting, output loading, and supply condition. Keep the gain-control node away from high-level outputs and verify that the required gain-command range is available throughout the receiver's signal-strength interval.

🏭

Industrial Measurement Systems

The AD600JR supports industrial measurement systems in which sensor output amplitude varies with process conditions and requires automatic range adjustment. Linear-in-dB gain control is convenient for logarithmic detector and measurement architectures, while 0.3 dB absolute-gain accuracy helps bound amplitude uncertainty. Its dual channels can handle two related sensors without duplicating the entire analog path. The 1.4 nV/√Hz input-noise density is beneficial for low-level transducer stages, but cable and source impedance can dominate total input noise in field installations. Use short, guarded signal paths and a clean reference ground, and confirm common-mode range and output swing against the sensor and converter interface before committing the channel to a process-control application.

🔧

Precision Test and Measurement

The AD600JR can serve as a variable-gain element in precision test equipment that must present a controlled signal level to a converter, detector, or downstream instrument. The specified 0.3 dB absolute-gain accuracy and low distortion of −60 dBc at a 1 V output support predictable measurements. Its bandwidth to 35 MHz and 275 V/µs slew rate provide adequate speed for many moderate-frequency instruments, while two channels can automate differential or complementary amplitude tests. For highest measurement accuracy, operate within the recommended output-swing and load limits and avoid driving the output into compression. Validate gain accuracy over the complete command range and calibrate the complete instrument if absolute traceability is required.

📡

Automatic Gain Control Systems

The AD600JR is well suited to automatic gain-control loops because it combines two channels with independent electronic gain adjustment and a response that is linear in decibels. A control loop can adjust attenuation or amplification to maintain a usable downstream level despite a wide input range. The 35 MHz bandwidth allows the amplifier to operate at RF, IF, or baseband frequencies within the device's specified operating conditions. Gain-command linearity and accuracy must be combined with loop dynamics to prevent oscillation or excessive channel gain variation. Keep the control path compact, account for the closed-loop bandwidth, and use the manufacturer transfer characteristic to translate detector voltage into the required gain-control voltage.

What is the AD600JR?
The AD600JR is a dual-channel, low-noise variable gain amplifier from Analog Devices. Each channel has independent gain control, a gain response that is linear in decibels, two gain ranges reaching +30 dB, and an absolute-gain accuracy of 0.3 dB. The manufacturer describes the AD600 family as optimized for ultrasound imaging and other applications requiring precise gain, low noise, low distortion, and wide bandwidth.
What are the key specifications of AD600JR that engineers should know?
The AD600JR combines two independently controlled variable-gain channels in a 16-lead SOIC. Key specifications include bandwidth up to 35 MHz at −3 dB, input noise density of 1.4 nV/√Hz, slew rate of 275 V/µs, absolute-gain accuracy of 0.3 dB, and distortion of −60 dBc at a 1 V output. According to the Analog Devices manufacturer datasheet, the AD600J/AD602J grade is specified for 0°C to 70°C operation.
Where can I download the AD600JR datasheet PDF?
The official AD600JR documentation is available through the Analog Devices AD600 product page, which links the manufacturer data sheet identified as Revision F. Use that document for the exact pin descriptions, recommended application circuit, gain-control transfer characteristic, electrical limits, and package drawings. The distributor-hosted PDF pages are secondary copies, while the manufacturer product page remains the authoritative source for design decisions.
Where can I find the AD600JR pinout?
Use the pin-description table and package drawing in the official Analog Devices AD600 manufacturer datasheet. The AD600JR is a 16-lead SOIC, but the complete lead numbering is not reproduced on this product page. The datasheet is the appropriate place to confirm the two channel inputs and outputs, supply and ground leads, gain-control pins, and any package-specific details before assigning PCB tracks.
Is AD600JR suitable for ultrasound imaging?
Yes, the AD600JR is suitable for ultrasound imaging because the AD600 family is optimized for that application. Its two channels support independent gain adjustment, while bandwidth up to 35 MHz, input noise of 1.4 nV/√Hz, and 0.3 dB absolute-gain accuracy address the linear amplification of low-amplitude transducer signals. The actual channel bandwidth, noise, and gain behavior at the selected operating point must still be checked against the system requirements.
What can replace the AD600JR?
The AD600ARZ is the closest same-family replacement identified because it retains the 16-lead SOIC format and AD600 gain-control architecture, but its temperature grade and ordering suffix differ. A true drop-in choice also depends on the required gain range, operating temperature, supply voltage, and exact pin compatibility. The AD602-series devices use the same broad amplifier format but have different gain ranges, so they are not automatic replacements.
Is AD600JR the same as AD600ARZ?
The AD600JR and AD600ARZ belong to the same AD600 family and are offered in 16-lead SOIC packages, but their ordering suffixes identify different grade variants. The AD600JR is the J-grade part specified for 0°C to 70°C, whereas the AD600A grade is specified for −40°C to 85°C. Confirm the exact pinout, electrical limits, and temperature requirements before treating one MPN as a substitute for the other.
When should I choose AD600JR over AD602JR?
Choose the AD600JR when the system specifically requires the AD600 gain range and control behavior. The AD602 series belongs to the same dual variable-gain-amplifier family and uses the same 16-lead SOIC format, but its gain range and transfer characteristic differ. Use the manufacturer gain-control tables to determine whether the alternative covers the required attenuation and amplification range, then verify supply, temperature, and pin requirements.
AD600JR vs AD602JR - which is better for ultrasound receivers?
The AD600JR is the better choice when the ultrasound front end depends on the AD600's specified +30 dB gain range, linear-in-dB response, 35 MHz bandwidth, and 0.3 dB gain accuracy. The AD602JR is relevant when its distinct gain range better matches the receiver architecture. Neither device should be selected solely by bandwidth because the required gain-control range, low-level noise behavior, and system calibration determine the practical result.
How does the AD600JR gain-control accuracy affect signal-chain design?
The AD600JR provides a specified absolute-gain accuracy of 0.3 dB with a gain response that is linear in decibels. That accuracy determines how closely the implemented attenuation or amplification matches the commanded value. In ultrasound or instrumentation systems, residual gain error can affect echo amplitude, channel-to-channel consistency, calibration range, and the usable dynamic range. Use the manufacturer transfer curves and calibration procedure rather than assuming ideal gain control.
What power and thermal considerations apply to the AD600JR?
The AD600JR should be evaluated at the highest supply voltage and output-drive condition expected in the design because amplifier dissipation depends on supply level, quiescent current, output swing, and load. The exact dissipation and junction-temperature limits are not stated in the product summary, so consult the official manufacturer datasheet before estimating thermal margin. Keep supply traces short, use local high-frequency decoupling, and avoid placing heat-generating circuitry directly beneath the SOIC.
What is the bandwidth of the AD600JR?
The AD600JR has bandwidth extending to 35 MHz at the −3 dB point. This makes it suitable for moderate-bandwidth analog signal chains, including portions of ultrasound receiver systems. Bandwidth does not by itself guarantee acceptable signal quality because gain setting, output swing, load, noise, and distortion also matter. Compare those parameters at the intended gain and frequency rather than treating the 35 MHz figure as a complete system specification.
How should the AD600JR PCB layout be designed?
Place the device close to the driven analog input and output paths, keep the gain-control route short, and provide local supply bypassing at the relevant pins. Use a continuous ground reference and return output-current paths away from sensitive gain-control and low-level input nodes. The official application circuit and pin table should guide the footprint and grounding topology, while board-level cleanliness is especially important because the amplifier supports input noise as low as 1.4 nV/√Hz.
What is the noise performance of the AD600JR?
The AD600JR has a specified low input-noise density of 1.4 nV/√Hz. This is important in ultrasound, medical, and instrumentation systems where weak sensor outputs must be amplified without adding excessive noise. The value is an input-referred density and should be integrated over the actual system bandwidth only after checking the complete frequency response. Source impedance, grounding, shielding, and subsequent converter noise also affect the usable result.
Where to buy AD600JR online?
Use the Request a Quote form on this page to request AD600JR availability, lead time, and ordering information for the required package variant. Quote requests are the appropriate route for commercial evaluation because inventory and commercial terms can change quickly. The manufacturer product page and distributor listing identify the part, but engineers should confirm the exact suffix, temperature grade, quantity, and delivery requirements when placing an order.
What is the price and lead time for AD600JR?
Current commercial pricing and lead time for the AD600JR should be requested through the Request a Quote form on this page. Quote handling permits the exact MPN, quantity, shipment destination, and required delivery date to be confirmed together. The component is identified as a 16-lead SOIC dual variable-gain amplifier, but availability by region and volume should not be inferred from a general product listing or from the existence of a reel-ordering variant.
Is AD600JR in stock?
AD600JR inventory status should be confirmed through the Request a Quote form on this page for the required quantity and destination. The product is a cataloged 16-lead SOIC dual variable-gain amplifier, but availability can differ by order quantity, package marking, and region. A general listing or manufacturer product page is not itself a guarantee of current stock, so the quotation process is the appropriate mechanism for a production commitment.

Datos de referencia de ingeniería para AD600JR — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the AD600JR when the design requires two independently controlled variable-gain channels, the AD600 gain ranges extending to +30 dB, bandwidth to 35 MHz, and operation from 0°C to 70°C. It is especially suitable for ultrasound and precision analog front ends where low input noise and controlled gain are important. Select the AD600ARZ when the same AD600 family and 16-lead SOIC format are needed over the broader −40°C to 85°C range. Consider the AD602JR or AD602ARZ only when the AD602 gain range better matches the receiver or control loop; their common package does not by itself establish functional equivalence. Before final selection, compare supply voltage, input and output ranges, exact gain-control transfer curves, noise, distortion, temperature grade, and pin descriptions in the manufacturer documentation. Use the Request a Quote form for current commercial availability and lead-time confirmation.

Comparación con alternativas

Parámetro Este producto AD600ARZ AD602JR AD602ARZ
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-lead SOIC 16-lead SOIC 16-lead SOIC 16-lead SOIC
Product Type Dual-channel variable gain amplifier Dual-channel variable gain amplifier Dual-channel variable gain amplifier Dual-channel variable gain amplifier
Channel Count 2 channels 2 channels 2 channels 2 channels
Gain Control Independent for each channel Independent for each channel Independent for each channel Independent for each channel
Gain Range Two ranges reaching +30 dB AD600-family gain ranges AD602-family gain range; exact limits require verification AD602-family gain range; exact limits require verification
Operating Temperature 0°C to 70°C −40°C to 85°C 0°C to 70°C −40°C to 85°C

Diferenciadores clave

  • Independent dual-channel gain control (frente a AD602ARZ)
  • Wide-bandwidth signal handling (frente a AD600ARZ)
  • Low-noise input suitable for weak signals (frente a AD602JR)

Notas de diseño

Place the AD600JR close to the source and destination of the controlled analog signal, and route the two channels to minimize differential pickup. Keep the gain-control connection short and isolated from output-return currents. A continuous ground plane is important because the amplifier's 1.4 nV/√Hz input-noise specification leaves little margin for additional board noise. Confirm the footprint and lead numbering against the manufacturer package drawing before PCB fabrication.

Use local supply decoupling and route it with low loop area to prevent supply ripple from coupling into the wideband signal path. Verify the supply-voltage limits, quiescent current, output swing, and allowed output load in the official manufacturer datasheet. Because this is a high-bandwidth dual amplifier, power and ground planes should not be shared with noisy switching stages without careful isolation and filtering.

Analyze the complete gain-control and analog path rather than treating the 35 MHz bandwidth as an isolated specification. The 0.3 dB absolute-gain accuracy and linear-in-dB response are useful only when the commanded level stays within the valid range. Check noise, distortion, slew behavior, and output swing at the intended frequency and gain, and use the manufacturer transfer curves to calibrate system gain accurately.

Estimate dissipation from the actual supply voltage, quiescent current, output swing, load, and channel activity, then compare the result with the manufacturer's thermal limits. The two channels may operate at different gain settings and signal levels, so the worst-case channel combination should be evaluated. Provide adequate copper around the SOIC and avoid enclosing it in a thermally insulating area shared with heat-producing components.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The product information identifies the AD600JR as an Analog Devices variable-gain amplifier in a 16-lead SOIC, but it does not explicitly state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status. AEC-Q100 is not applicable to this general-purpose amplifier grade.

Datos verificados el: 2026-11-14 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

AD600JR datasheet AD600JR pinout AD600JR datasheet pdf AD600JR 16-SOIC AD600JR variable gain amplifier AD600JR equivalent AD600JR replacement AD600JR cross reference AD600JR vs AD602JR AD600JR footprint AD600JR application circuit AD600JR ultrasound amplifier AD600JR price AD600JR stock Analog Devices AD600JR

Componentes & términos relacionados

Analog Devices AD600JR AD600ARZ AD602JR AD602ARZ variable gain amplifier VGA dual-channel amplifier analog signal processing amplifier IC semiconductor gain control linear-in-dB gain response input noise density absolute gain accuracy small-signal bandwidth slew rate total harmonic distortion 16-lead SOIC SOIC package family surface-mount package ultrasound imaging medical diagnostic instrumentation communications signal conditioning industrial measurement
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ