Analog Devices

AD705BQ - Picoampere Input Op Amp | Analog Devices

N.º de pieza: AD705BQ ✓ Activo
60 uV maximum Vdss 100 pA maximum Id 8-pin CERDIP (Q-8), hermetically sealed Package
MOQ: 1 |

AD705BQ Descripción general

The Analog Devices AD705BQ is a low-power bipolar operational amplifier with picoampere-class input bias current, specified at 100 pA maximum, and is packaged in an 8-pin hermetically sealed CERDIP. Its key electrical characteristics include a maximum offset voltage of 60 uV, a typical small-signal bandwidth of 0.8 MHz, and a minimum open-loop gain of 200 V/mV. The AD705BQ combines bipolar input characteristics with lower input-bias-current drift than a conventional BiFET amplifier.

An operational amplifier is a high-gain analog signal-conditioning component used to amplify voltage differences, buffer sensors, implement active filters, and drive analog-to-digital converter inputs. The AD705 belongs to the low-input-bias-current operational amplifier hierarchy, where bipolar amplifier, precision amplifier, signal-conditioning IC, and analog semiconductor describe complementary levels of the product taxonomy. Its low bias current is especially useful when the source impedance is high or when measured currents are small enough to be distorted by amplifier input leakage.

The AD705BQ offers a minimum common-mode rejection ratio of 114 dB and a minimum power-supply rejection ratio of 114 dB for the AD705T version. Its maximum input offset voltage is 60 uV, while the open-loop gain is specified at 200 V/mV minimum. The low-power bipolar design is intended for instrumentation where low input current, stability, and signal-chain accuracy matter more than wide bandwidth or rail-to-rail operation.

Analog Devices describes the AD705 as a bipolar op amp with low input bias current and significantly lower input-bias-current drift over temperature than a BiFET amplifier. This architecture makes the device appropriate for precision current measurement, low-level sensor interfaces, charge and leakage-sensitive instrumentation, and analog signal conditioning. Its 0.8 MHz typical bandwidth supports general-purpose precision rather than high-speed signal processing.

Typical applications include pH and electrochemical probe interfaces, photodiode and detector amplification, low-current transimpedance circuits, laboratory measurement systems, and precision feedback networks. The 8-pin CERDIP package supports applications requiring a hermetically sealed device, although the exact environmental qualification status should be confirmed for each assembly and qualification level.

When designing around the AD705BQ, place input and feedback components close to the amplifier pins and keep high-impedance traces short to minimize leakage and leakage-induced phase error. Bias-current compensation resistors should be calculated from the source impedance at each input. Because this is a fixed, non-rail-to-rail device, verify output swing and input common-mode range before selecting the supply voltage and operating point.

This page combines the AD705BQ electrical characteristics, package information, application guidance, and qualified drop-in alternatives. It also provides engineering-focused comparison notes intended to simplify replacement planning while preserving the original circuit footprint and device topology.

Alternativas directas para AD705BQ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

AD705AQ

✅ Sustitución directa
📦 8-pin CERDIP (Q-8)
Same Q-8 package and AD705 amplifier topology; grade-specific temperature and qualification requirements differ, while the family input-bias-current specification remains 100 pA maximum.

📋 Alternativa de referencia (no en el catálogo)

AD705TQ

✅ Sustitución directa
📦 8-pin CERDIP (Q-8)
Same Q-8 package and AD705 amplifier topology; the AD705T has a specified 114 dB minimum PSRR, while grade-specific temperature requirements differ.

📋 Alternativa de referencia (no en el catálogo)

AD705BQ Valores máximos y características eléctricas

Product Type Low-power bipolar operational amplifier
Input Bias Current 100 pA maximum
Maximum Offset Voltage 60 uV maximum
Offset Voltage Drift 0.6 uV/C maximum
Small-Signal Bandwidth 0.8 MHz typical
Open-Loop Gain 200 V/mV minimum
Common-Mode Rejection Ratio 114 dB minimum
Power-Supply Rejection Ratio 114 dB minimum for AD705T
Input Type Picoampere input current
Circuit Count 1 circuit
Encapsulado 8-pin CERDIP (Q-8), hermetically sealed
Tipo de montaje Through-hole
Transistor Count 45 transistors

Configuración de pines de AD705BQ

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
Pin 1 NC — Not connected
Pin 2 -IN — Inverting input
Pin 3 +IN — Noninverting input
Pin 4 V- — Negative supply
Pin 5 NC — Not connected
Pin 6 OUT — Output
Pin 7 V+ — Positive supply
Pin 8 NC — Not connected

Aplicaciones típicas

AD705BQ es adecuado para 6 aplicacións: Precision pH and Electrochemical Probe Interface, Low-Current Transimpedance Amplifier, High-Impedance Sensor Signal Conditioning, Precision Feedback and Difference Amplifier, Active Filtering and Analog Conditioning, Battery-Powered Portable Instrumentation.

🧪

Precision pH and Electrochemical Probe Interface

The AD705BQ fits electrochemical and pH probe interfaces because its input bias current is limited to 100 pA maximum and its maximum offset voltage is 60 uV. The amplifier can provide gain and impedance conversion before an ADC while limiting the current drawn from the sensing electrode. Its 114 dB minimum CMRR helps suppress common-mode interference, while the 0.8 MHz typical bandwidth is appropriate for slow laboratory measurements. The hermetically sealed 8-pin CERDIP package also suits instrument assemblies where environmental sealing is part of the mechanical design.

📷

Low-Current Transimpedance Amplifier

The AD705BQ is appropriate for a low-current transimpedance stage in which the 100 pA maximum input bias current can influence the measurement of picoampere or nanoampere signals. Its 200 V/mV minimum open-loop gain supports gain configuration around a feedback resistor, and its 60 uV maximum offset voltage limits input-referred error. For photodiode or detector sensing, preserve the 0.8 MHz bandwidth limit and keep the high-impedance summing node short and guarded to minimize parasitic leakage.

📡

High-Impedance Sensor Signal Conditioning

The AD705BQ supports signal conditioning for high-impedance sensors where amplifier input leakage could compete with the sensor current. Its 100 pA maximum input bias current is the principal fit criterion, while the 114 dB minimum common-mode rejection ratio improves rejection of common-mode voltage on sensor cables. The AD705BQ’s maximum offset voltage of 60 uV is also useful when establishing a low-level reference. Bias resistors should be calculated from the sensor’s effective source resistance, including connector and leakage effects.

⚖️

Precision Feedback and Difference Amplifier

The AD705BQ can implement a precision differential stage or error amplifier in laboratory and industrial instrumentation. The 200 V/mV minimum open-loop gain provides useful loop gain for closed-loop accuracy, while the 114 dB minimum CMRR assists rejection of common-mode voltage. Its 60 uV maximum offset voltage is appropriate for low-level error signals, but output swing and input common-mode limits must be checked against the supply rails. Resistor matching and thermal gradients remain important in precision difference-amplifier layouts.

🎛️

Active Filtering and Analog Conditioning

The AD705BQ is suitable for low-frequency active filters and analog conditioning networks where low input current helps prevent high-impedance filter nodes from being disturbed. Its 0.8 MHz typical small-signal bandwidth provides ample range for audio-band, sensor-band, and control-signal conditioning while avoiding unnecessary reliance on high-speed performance. The 60 uV maximum offset voltage and 114 dB minimum CMRR support accurate signal preservation. Confirm closed-loop stability, capacitive loading, and output-current requirements for the selected filter topology.

🔋

Battery-Powered Portable Instrumentation

The AD705BQ fits low-power portable measurement equipment because it is described as a low-power bipolar operational amplifier with picoampere-class input bias current. The 100 pA maximum input bias current reduces loading of battery-powered electrochemical or resistance sensors, while the 0.8 MHz typical bandwidth supports moderate-speed acquisition. Its 60 uV maximum offset voltage is valuable in compact single-supply instruments. Supply-voltage limits, output swing, input common-mode range, and quiescent current must be checked for the intended battery operating range.

What is the input bias current of the AD705BQ?
The AD705BQ has a maximum input bias current of 100 pA. According to the Analog Devices AD705 datasheet, bias-current specifications are guaranteed at either input, making this low-power bipolar operational amplifier suitable for high-impedance sources where input leakage could otherwise distort the measured signal. Its architecture combines picoampere-class input current with lower bias-current drift over temperature than a conventional BiFET amplifier.
What is the AD705BQ and what is it used for?
The AD705BQ is a single low-power bipolar operational amplifier optimized for picoampere input bias current. According to the Analog Devices AD705 datasheet, it is suitable for precision instrumentation, low-level sensor interfaces, and current-measurement circuits. Its maximum offset voltage is 60 uV, its minimum open-loop gain is 200 V/mV, and its typical small-signal bandwidth is 0.8 MHz.
Where can I download the AD705BQ datasheet PDF?
The AD705BQ datasheet PDF can be accessed through the Analog Devices AD705 document linked on this page. The document identifies the AD705BQ as an 8-pin CERDIP (Q-8) version of the picoampere-input-current bipolar operational amplifier. It also lists related package options, including AD705AQ, AD705TQ, AD705JN, AD705KN, and AD705JR, and provides the package-option context needed for footprint verification.
Where can I find the AD705BQ pinout and package information?
The AD705BQ uses an 8-pin hermetically sealed CERDIP package designated Q-8. According to the Analog Devices AD705 datasheet, the AD705BQ is one of the 8-pin Cerdip options listed for the device. Assign PCB connections from the manufacturer’s pin-description table and verify orientation against the package drawing before fabrication.
What are the key specifications of AD705BQ that engineers should know?
The AD705BQ combines a 100 pA maximum input bias current with a 60 uV maximum offset voltage and a 200 V/mV minimum open-loop gain. According to the Analog Devices AD705 datasheet, its common-mode rejection ratio is 114 dB minimum, while the AD705T version has a 114 dB minimum power-supply rejection ratio. The device also provides a 0.8 MHz typical small-signal bandwidth in an 8-pin hermetically sealed CERDIP package.
Is AD705BQ suitable for high-impedance sensor measurement?
Yes, the AD705BQ is suitable for high-impedance sensor measurement because its input bias current is specified at 100 pA maximum. According to the Analog Devices AD705 datasheet, the low input current helps reduce measurement error when the sensor source impedance is high. The 60 uV maximum offset voltage and 114 dB minimum CMRR also support precision signal conditioning, although the complete measurement chain must remain within the input common-mode limits.
What is the difference between AD705BQ and AD705AQ?
AD705BQ and AD705AQ are both 8-pin CERDIP versions of the AD705 low-power bipolar operational amplifier. According to the Analog Devices AD705 datasheet, both provide the same picoampere-input-current amplifier family and use the Q-8 package. Their temperature-grade details should be compared on the ordering information and must be checked against the qualification requirements of the target assembly before substitution.
What is the difference between AD705BQ and AD705TQ?
AD705BQ and AD705TQ both use the 8-pin CERDIP package listed in the Analog Devices AD705 datasheet. The AD705T specification includes a 114 dB minimum power-supply rejection ratio, while the family-level data also identifies 0.6 uV/C maximum offset drift. The temperature range and grade-specific requirements must be verified before treating either device as a direct replacement.
When should I choose AD705BQ instead of AD705AQ or AD705TQ?
Choose the AD705BQ when the assembly requires the Q-8 hermetically sealed CERDIP format and the grade-specific environmental expectations of the B-qualified ordering option. AD705AQ and AD705TQ are also Q-8 devices in the same AD705 family, so selection should focus on temperature range, qualification, marking, and procurement requirements rather than package interchangeability alone. Confirm the relevant ordering limits in the manufacturer datasheet.
What can replace the AD705BQ?
The confirmed same-footprint choices are the AD705AQ and AD705TQ, both listed as 8-pin CERDIP options in the Analog Devices AD705 datasheet. They retain the same Q-8 topology, but their grade and temperature requirements must match the target assembly. No cross-brand drop-in replacement is confirmed on this page, so use the Request a Quote form to discuss current sourcing and replacement qualification requirements.
Can AD705AQ replace AD705BQ without PCB changes?
The AD705AQ can share the AD705BQ’s 8-pin CERDIP footprint because the Analog Devices AD705 datasheet lists both as Q-8 package options. This is a package-compatible same-family choice, but it is a drop-in replacement only when temperature grade, qualification, offset limits, and other ordering requirements are acceptable. Review the manufacturer ordering table before committing the substitution.
Is there a cross-brand AD705BQ equivalent?
No cross-brand drop-in equivalent is confirmed for the AD705BQ. The manufacturer’s AD705 datasheet identifies AD705AQ and AD705TQ as same-package Q-8 options, while the cross-reference results do not establish a competitor MPN with verified pin compatibility and equivalent electrical ratings. Use the Request a Quote form to request current sourcing assistance and specify any required alternative-qualification process.
How do I reduce bias-current error in an AD705BQ circuit?
Reduce bias-current error by using feedback and bias-compensation resistors selected from the actual source impedance at each input. The AD705BQ’s 100 pA maximum input bias current is the key design value for this calculation, according to the Analog Devices AD705 datasheet. Keep high-impedance nodes short, use clean guarding where appropriate, and account for board leakage when the sensor or feedback network operates at picoampere levels.
Where can I buy AD705BQ and what is the current lead time?
Use the Request a Quote form on this page for current AD705BQ availability, lead time, order quantity, and purchase options. The product is offered as an 8-pin CERDIP operational amplifier, but current inventory and delivery scheduling can change. Request a formal quotation with your required quantity, date code, packaging needs, and target ship-to location.
What is the price and stock status of AD705BQ?
Current pricing, stock status, and available quantity should be obtained through the Request a Quote form on this page. The AD705BQ is listed as an 8-pin CERDIP single operational amplifier with a maximum input bias current of 100 pA. Provide your required quantity and delivery schedule so the quotation can reflect the appropriate order and sourcing conditions.
Does AD705BQ support rail-to-rail input and output operation?
The AD705BQ should not be assumed to support rail-to-rail operation. According to the Analog Devices AD705 datasheet, it is a low-power bipolar amplifier specified with a maximum offset voltage of 60 uV, a minimum open-loop gain of 200 V/mV, and a typical bandwidth of 0.8 MHz. Verify the input common-mode range and output swing against the chosen supply voltage in the manufacturer datasheet.

Datos de referencia de ingeniería para AD705BQ — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the AD705BQ when an instrument requires a single, low-power bipolar operational amplifier with a 100 pA maximum input bias current, 60 uV maximum offset voltage, and 8-pin hermetically sealed CERDIP package. AD705AQ is a package-compatible same-family choice when its grade and temperature requirements satisfy the assembly. AD705TQ is also pin- and package-compatible and includes a 114 dB minimum PSRR specification, making it relevant when power-supply rejection is a primary requirement. Because all three listed options belong to the same AD705 family, the decisive checks are temperature grade, qualification, input/output limits, and ordering designation rather than basic footprint compatibility. No confirmed cross-brand drop-in equivalent is identified, so an alternative supplier should not be assumed equivalent without a separate engineering review of pinout, bias current, offset, drift, bandwidth, supply range, and common-mode limits.

Comparación con alternativas

Parámetro Este producto AD705AQ AD705TQ
Package 8-pin CERDIP (Q-8), hermetically sealed 8-pin CERDIP (Q-8), hermetically sealed 8-pin CERDIP (Q-8), hermetically sealed
Brand Analog Devices Analog Devices Analog Devices
Product Type Low-power bipolar operational amplifier Low-power bipolar operational amplifier Low-power bipolar operational amplifier
Input Bias Current 100 pA maximum 100 pA maximum 100 pA maximum
Maximum Offset Voltage 60 uV maximum 60 uV maximum 60 uV maximum
Offset Voltage Drift 0.6 uV/C maximum 0.6 uV/C maximum 0.6 uV/C maximum
Small-Signal Bandwidth 0.8 MHz typical 0.8 MHz typical 0.8 MHz typical
Open-Loop Gain 200 V/mV minimum 200 V/mV minimum 200 V/mV minimum
Common-Mode Rejection Ratio 114 dB minimum 114 dB minimum 114 dB minimum
Circuit Count 1 circuit 1 circuit 1 circuit
Transistor Count 45 transistors 45 transistors 45 transistors

Diferenciadores clave

  • Picoampere-class input loading supports precision high-impedance measurements (frente a AD705AQ)
  • Maintains the same key precision and bandwidth ratings within the AD705 family (frente a AD705TQ)
  • Hermetically sealed ceramic package supports instrument-grade mechanical options (frente a AD705AQ)

Notas de diseño

Do not substitute a package-compatible device without checking the ordering-grade limits. The AD705BQ, AD705AQ, and AD705TQ share the 8-pin CERDIP format, but temperature range, qualification, marking, and application requirements can differ even when the circuit footprint matches. Review the Analog Devices ordering information and confirm every grade-specific limit before approving a replacement.

Keep the noninverting input, inverting input, feedback resistor, and sensitive summing node short and clean because picoampere-level bias current makes PCB contamination and leakage significant. Route high-impedance traces away from supply and switching-node paths, avoid large exposed pads of solder flux on the input area, and consider guarding where the source impedance is high.

Bias-current compensation requires the effective resistance seen by each input, including the sensor, feedback network, and any bias resistor. Calculate the resulting input offset from the 100 pA maximum input bias current and account for PCB leakage separately. This check is essential in transimpedance and electrochemical-probe circuits where the amplifier input current can be comparable to the measured signal.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The AD705 datasheet identifies the Q-8 package as hermetically sealed ceramic, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are stated. Confirm compliance for the exact ordering code and assembly.

Búsquedas relacionadas

AD705BQ datasheet AD705BQ pinout AD705BQ datasheet pdf AD705BQ equivalent AD705BQ replacement AD705BQ cross reference AD705BQ vs AD705AQ AD705BQ footprint AD705BQ application circuit AD705BQ 100 pA op amp AD705BQ price AD705BQ stock Analog Devices AD705BQ AD705BQ CERDIP pinout AD705BQ electrochemical probe amplifier

Componentes & términos relacionados

Analog Devices AD705BQ AD705AQ AD705TQ operational amplifier precision amplifier low-input-bias-current amplifier bipolar amplifier BiFET amplifier analog signal conditioning semiconductor input bias current offset voltage offset voltage drift common-mode rejection ratio CMRR power-supply rejection ratio PSRR open-loop gain small-signal bandwidth transimpedance amplifier electrochemical probe photodiode amplifier 8-pin CERDIP Q-8 hermetically sealed package surface-mount and through-hole analog IC
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ