Analog Devices

AD741JH/+ - 1MHz Precision Op Amp | Analog Devices

N.º de pieza: AD741JH/+ ✓ Activo
10 V at 1 kΩ load Vdss 8-pin TO-99 metal package Package
MOQ: 1 |

AD741JH/+ Descripción general

Analog Devices AD741JH/+ is a general-purpose, internally compensated operational amplifier with a 1 MHz gain-bandwidth product, a 0.5 V/µs slew rate, and full short-circuit protection, supplied in an 8-pin TO-99 metal package. The AD741J is a specially tested and selected version of the standard AD741 family, with improved processing and additional electrical testing intended to provide higher precision performance.

An operational amplifier, commonly called an op amp, is a high-gain differential amplifier used to amplify, buffer, filter, compare, or control analog signals. The AD741 belongs to the broader voltage-amplifier and analog signal-conditioning hierarchy. Its internally compensated architecture allows operation as a stable closed-loop amplifier without an external compensation network, while short-circuit protection improves robustness in feedback circuits and signal-chain applications.

The AD741 family emphasizes precision and cost rather than modern low-power or rail-to-rail performance. Its 1 MHz gain-bandwidth product supports general-purpose signal amplification at moderate frequencies, and its 0.5 V/µs slew rate provides adequate large-signal response for audio, instrumentation, control, and buffering duties. The AD741J grade receives additional testing to control offset-voltage performance, making it more appropriate for precision DC applications than an unselected general-purpose amplifier.

The J, K, L, and S grades are selected versions of the AD741 family. The manufacturer identifies the J, K, and L grades as providing maximum limits for offset-voltage drift, while the L grade also has limits for low input offset voltage and low input bias current. The K and L grades additionally specify a minimum common-mode rejection ratio of 90 dB. These grade-specific limits make ordering and replacement decisions more important than the shared 1 MHz bandwidth figure.

Typical applications include low-frequency precision amplifiers, analog instrumentation, audio preamplification, sensor-signal conditioning, feedback-control loops, and general buffering. The device is most appropriate where conventional bipolar-input op-amp behavior, supply voltage, output swing, and common-mode range are compatible with the design. The family requires at least 10 V under the cited 1 kΩ load condition.

When designing with the AD741JH/+, verify supply polarity, input common-mode range, output swing, and stability at the intended closed-loop gain. Keep feedback paths short, place compensation or decoupling components close to the device where applicable, and confirm that the selected J-grade test limits satisfy the system error budget.

This page combines the official AD741 family information with practical application guidance, grade comparisons, package details, and design considerations. It is intended to help engineers distinguish the AD741J from the K, L, and S grades before ordering a replacement or designing a precision analog circuit.

Alternativas directas para AD741JH/+ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

AD741KH/+

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 8-pin TO-99
The K grade specifies 90 dB minimum CMRR while retaining the 1 MHz gain-bandwidth product and 0.5 V/µs slew rate; grade-specific J limits differ.

📋 Alternativa de referencia (no en el catálogo)

AD741LH/+

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Analog Devices
📦 8-pin TO-99
Single operational amplifier · 1 amplifier · Monolithic bipolar operational amplifier · 1 MHz · 1000 uV · Internal · Full · TO-99, 8 pins

Consulte el precio

Ver hoja de datos →

AD741SH/+

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 8-pin TO-99
The S grade is specially tested and selected with the same 1 MHz bandwidth and 0.5 V/µs slew rate, but its grade-specific test limits differ from the J grade.

📋 Alternativa de referencia (no en el catálogo)

AD741JH/+ Valores máximos y características eléctricas

Product Type General-purpose precision operational amplifier
Gain-Bandwidth Product 1 MHz
Slew Rate 0.5 V/µs
Minimum Supply Voltage 10 V at 1 kΩ load
Compensation Internal compensation
Short-Circuit Protection Full short-circuit protection
Precision Grade AD741J selected grade
Encapsulado 8-pin TO-99 metal package

Configuración de pines de AD741JH/+

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
Pin 1 OFFSET NULL — Offset-voltage null connection
Pin 2 INVERTING INPUT — Inverting input
Pin 3 NONINVERTING INPUT — Non-inverting input
Pin 4 V- — Negative supply connection
Pin 5 OFFSET NULL — Offset-voltage null connection
Pin 6 OUTPUT — Amplified output
Pin 7 V+ — Positive supply connection
Pin 8 NC — No connection

Aplicaciones típicas

AD741JH/+ es adecuado para 6 aplicacións: Precision Instrumentation Amplification, Audio Preamplification, Sensor Signal Conditioning, Analog Feedback Control, General-Purpose Buffering, Low-Frequency Active Filtering.

🏭

Precision Instrumentation Amplification

The AD741JH/+ fits low-frequency instrumentation stages that require a stable closed-loop amplifier with predictable offset behavior. Its 1 MHz gain-bandwidth product supports moderate-bandwidth gain stages, while the J grade’s improved processing and additional electrical testing make it more suitable for precision work than an unselected general-purpose amplifier. The amplifier can be configured with external feedback resistors to establish the required gain. Designers should calculate the offset-voltage, drift, and input-bias-current contributions over the complete temperature range, then confirm that the source impedance does not create unacceptable bias-current error. The 0.5 V/µs slew rate also constrains the largest full-scale signals that can be reproduced without excessive distortion.

🎧

Audio Preamplification

The AD741JH/+ can serve in audio preamplifier and buffering stages where classic bipolar-input operational-amplifier behavior is preferred. Its 1 MHz gain-bandwidth product provides useful open-loop bandwidth for low-to-moderate audio frequencies, and the 0.5 V/µs slew rate reduces large-signal distortion risk in the audio band. The J grade adds controlled offset-performance selection for applications sensitive to DC offset or thermal drift. The circuit should provide adequate supply voltage, ensure the signal remains within the common-mode and output-swing limits, and keep feedback routing compact. Power-supply bypassing near the amplifier helps prevent supply disturbances from appearing as output noise.

🧩

Sensor Signal Conditioning

The AD741JH/+ is appropriate for conditioning sensor signals in industrial and control systems when the sensor operates within the amplifier’s electrical limits. The 1 MHz gain-bandwidth product can accommodate modest sensor bandwidth, and the 0.5 V/µs slew rate is useful for following larger amplitude steps. Because the J grade receives additional electrical testing, it can reduce uncertainty in offset-sensitive conditioning paths compared with a generic amplifier. The key checks are input bias current relative to sensor source impedance, input offset voltage over temperature, output swing, and common-mode range. A suitable precision resistor network and physically short feedback path will help preserve the expected accuracy and closed-loop behavior.

⚡

Analog Feedback Control

The AD741JH/+ is useful in analog feedback loops, regulators, and actuator-control circuits that need negative feedback to correct an analog error signal. Internal compensation removes the need for an external compensation network in conventional closed-loop configurations, while full short-circuit protection improves robustness during transient conditions. The 1 MHz bandwidth allows the loop to respond to moderate-frequency corrections, and the 0.5 V/µs slew rate influences how quickly the output can follow larger control commands. Loop stability must be checked with the actual sensor, compensation network, load, and wiring because a compensation-free device does not guarantee stability in every topology. Designers should also verify that supply disturbances remain within the amplifier’s operating limits.

🔧

General-Purpose Buffering

The AD741JH/+ can buffer a high-impedance source when the required bandwidth and load current are moderate. A voltage follower takes advantage of the device’s internally compensated architecture and provides high input impedance with low output impedance, helping isolate the source from downstream circuitry. The 1 MHz gain-bandwidth product and 0.5 V/µs slew rate determine how well the buffer handles source capacitance, load steps, and signal transitions. Check the input common-mode range, output swing, capacitive-load stability, and minimum supply requirement before deployment. The J grade’s selected precision performance is useful when buffer offset contributes directly to the measurement, although offset and bias-current calculations remain necessary for high-source-impedance sources.

🌐

Low-Frequency Active Filtering

The AD741JH/+ can implement active low-pass or band-pass sections when the signal bandwidth remains modest. With 1 MHz gain-bandwidth product and internal compensation, the device can serve as the active element in feedback filters formed by external resistors and capacitors. Component tolerances and amplifier offset often dominate practical performance in narrow-band filters, making the J grade’s additional testing useful. The 0.5 V/µs slew rate constrains large-signal output behavior and should be checked against the filter’s peak amplitude and bandwidth. Designers should also account for the minimum 10 V supply condition cited for a 1 kΩ load and evaluate capacitor parasitics, source impedance, and output loading before treating the simulated response as final.

Resumen de productos recomendados

AD741JH/+ Analog Devices Se usa en: Precision Instrumentation Amplification, Audio Preamplification, Sensor Signal Conditioning, Analog Feedback Control, General-Purpose Buffering, Low-Frequency Active Filtering LM741H 8-pin TO-99 functional comparison Se usa en: Precision Instrumentation Amplification, Low-Frequency Active Filtering AD741LH/+ Tighter-offset AD741 family selection Se usa en: Audio Preamplification, General-Purpose Buffering AD741KH/+ AD741 selection with 90 dB minimum CMRR Se usa en: Sensor Signal Conditioning AD741SH/+ Selected AD741 family option Se usa en: Analog Feedback Control
What is the AD741JH/+?
The AD741JH/+ is a selected-grade, general-purpose operational amplifier from Analog Devices. It provides a 1 MHz gain-bandwidth product, a 0.5 V/µs slew rate, internal compensation, and full short-circuit protection in an 8-pin TO-99 package. According to the AD741 Series datasheet, the J grade receives improved processing and additional electrical testing to provide higher precision performance than the standard AD741.
Where can I download the AD741JH/+ datasheet PDF?
The official AD741JH/+ datasheet PDF is available from Analog Devices through the AD741 Series data-sheet link on this page. It is the appropriate document for confirming the J-grade limits, electrical characteristics, pin configuration, supply constraints, and test conditions. The family datasheet covers AD741J, AD741K, AD741L, and AD741S selections as well as the standard AD741.
Where can I buy AD741JH/+ and request a quote?
Use the Request a Quote form on this page to request AD741JH/+ availability, order quantity, and current commercial terms. The form is the direct route for checking stock, minimum order quantity, and lead time without relying on stale catalog records. The AD741JH/+ ordering code identifies the Analog Devices J-grade device in an 8-pin TO-99 package.
What is the price of AD741JH/+?
The AD741JH/+ price depends on order quantity, condition, and current market availability. Submit the part number and required quantity through the Request a Quote form on this page for a current offer. Requesting a quote also allows procurement to confirm whether the J-grade electrical limits and the exact 8-pin TO-99 ordering configuration are required for your assembly.
What is the lead time and stock status for AD741JH/+?
Stock and lead time for AD741JH/+ should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, authorized-channel inventory, and whether the order includes other Analog Devices components. Include the required quantity, target date, and acceptable assembly packaging so procurement can return an actionable supply commitment.
What are the key specifications engineers should know about AD741JH/+?
The key AD741JH/+ specifications are its 1 MHz gain-bandwidth product, 0.5 V/µs slew rate, internal compensation, full short-circuit protection, and operation from a minimum 10 V supply at a 1 kΩ load. According to the Analog Devices AD741 Series datasheet, the J grade is specially tested and selected for improved precision performance. Package, temperature range, and remaining limits should be checked against the manufacturer documentation.
How does AD741JH/+ compare with AD741LH/+?
The AD741JH/+ and AD741LH/+ share the 1 MHz gain-bandwidth product, 0.5 V/µs slew rate, internal compensation, short-circuit protection, and TO-99 package family. The L grade is specified with a maximum input offset voltage of 0.5 mV, maximum drift of 5 µV/°C, maximum input bias current of 50 nA, and minimum CMRR of 90 dB. Choose L when its tighter limits are required, rather than merely because it is another AD741 family member.
Is AD741JH/+ the same as AD741KH/+?
The AD741JH/+ and AD741KH/+ are not identical selected grades, although both belong to the AD741 family and use the same 8-pin TO-99 configuration. The K grade has a minimum common-mode rejection ratio of 90 dB, while both grades share the 1 MHz bandwidth and 0.5 V/µs slew rate. Confirm the grade-specific offset, drift, bias-current, and temperature limits before making a substitution.
When should I choose AD741JH/+ over AD741LH/+?
Choose AD741JH/+ when the application benefits from the J grade’s improved processing and additional electrical testing but does not require the L grade’s stated limits of 0.5 mV maximum offset voltage, 5 µV/°C maximum drift, 50 nA maximum input bias current, and 90 dB minimum CMRR. The final choice should follow an error-budget comparison covering offset, drift, bias current, common-mode rejection, temperature, and supply conditions.
When should I choose AD741KH/+ over AD741JH/+?
Choose AD741KH/+ when common-mode rejection is a primary design constraint and the application can benefit from its 90 dB minimum specification. The AD741JH/+ remains appropriate when the J-grade precision selection is sufficient and a lower common-mode rejection specification is acceptable. Both retain the same 1 MHz gain-bandwidth product and 0.5 V/µs slew rate, so the decision should follow measured system requirements.
What can replace AD741JH/+ as a drop-in part?
AD741KH/+, AD741LH/+, and AD741SH/+ are same-brand alternatives within the AD741 family, but they are selected grades rather than guaranteed electrical duplicates of the J grade. The AD741KH/+ emphasizes common-mode rejection, while the AD741LH/+ provides tighter offset, drift, bias-current, and CMRR limits. Review the AD741 Series datasheet and your error budget before treating any grade change as a drop-in replacement.
What is the best cross-brand equivalent for AD741JH/+?
No cross-brand drop-in equivalent is established by the available manufacturer and cross-reference records, so assigning one would risk unreviewed offset, drift, bias-current, common-mode, and supply-compatibility differences. The defensible alternatives are the documented AD741 family selections listed on this page. For an LM741H cross-reference, compare every electrical limit and confirm the TO-99 pin configuration before approving it for a precision replacement.
Where is the AD741JH/+ pinout?
The AD741JH/+ pin configuration is shown in the AD741 Series datasheet and in the package pinout associated with this listing. It is an 8-pin TO-99 device with offset null, inverting input, non-inverting input, negative supply, output, positive supply, and unused or compensation-related positions. Use the manufacturer pin-description table when assigning PCB tracks because the metal-can package lacks a surface-mount land pattern.
Is AD741JH/+ suitable for instrumentation and buffer applications?
Yes, the AD741JH/+ is suitable for instrumentation and buffering when the signal amplitude, frequency, supply voltage, and common-mode range stay within its limits. Its 1 MHz gain-bandwidth product handles low- to moderate-frequency closed-loop tasks, while the J grade’s additional testing supports precision-focused designs. Verify input bias current and offset drift when the source impedance is high or the required accuracy is stringent.
What design limitations should engineers check for AD741JH/+?
Check the AD741JH/+ for operating voltage, input common-mode range, output swing, load capability, temperature grade, and noise before finalizing the circuit. The family operates from at least 10 V under the cited 1 kΩ load condition, which may be unsuitable for low-voltage systems. Also account for offset voltage, drift, input bias current, and the 0.5 V/µs slew rate in precision and wideband signal paths.

Datos de referencia de ingeniería para AD741JH/+ — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the AD741JH/+ for a general-purpose TO-99 precision-amplifier design that calls for the J grade’s improved processing and additional electrical testing without requiring the tighter numerical limits of the L grade. Choose the AD741LH/+ when the design benefits from its specified 0.5 mV maximum input offset voltage, 5 µV/°C maximum drift, 50 nA maximum input bias current, and 90 dB minimum common-mode rejection ratio. Choose the AD741KH/+ when common-mode rejection is the deciding requirement and the remaining grade-specific limits are acceptable. The AD741SH/+ remains a same-family selected option with the same 1 MHz bandwidth and 0.5 V/µs slew rate, but its grade-specific limits should be reviewed. For any replacement, compare offset, drift, bias current, CMRR, supply range, temperature grade, and package pins rather than bandwidth alone.

Comparación con alternativas

Parámetro Este producto AD741KH/+ AD741LH/+ AD741SH/+
Package 8-pin TO-99 8-pin TO-99 8-pin TO-99 8-pin TO-99
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Product Type Selected-grade general-purpose operational amplifier Selected-grade general-purpose operational amplifier Selected-grade general-purpose operational amplifier Selected-grade general-purpose operational amplifier
Gain-Bandwidth Product 1 MHz 1 MHz 1 MHz 1 MHz
Slew Rate 0.5 V/µs 0.5 V/µs 0.5 V/µs 0.5 V/µs
Minimum Supply Voltage 10 V at 1 kΩ load 10 V at 1 kΩ load 10 V at 1 kΩ load 10 V at 1 kΩ load
Compensation Internal compensation Internal compensation Internal compensation Internal compensation
Short-Circuit Protection Full short-circuit protection Full short-circuit protection Full short-circuit protection Full short-circuit protection

Diferenciadores clave

  • J-grade selection provides controlled precision performance (frente a AD741SH/+)
  • L grade offers explicitly tighter offset specifications (frente a AD741LH/+)
  • K and L grades specify higher common-mode rejection (frente a AD741KH/+)

Notas de diseño

Do not substitute the AD741J, K, L, or S grades solely because they share the TO-99 outline. Although the family shares the 1 MHz gain-bandwidth product and 0.5 V/µs slew rate, the selected grades have different offset-voltage, drift, input-bias-current, and common-mode-rejection limits. Build the comparison from the AD741 Series datasheet and confirm the exact grade before approving a replacement.

The AD741 family operates from at least 10 V under the cited 1 kΩ load condition. Confirm that both supply rails remain within the device limits and that the output swing is adequate for the chosen load. Keep the supply rails symmetrical unless the circuit specification explicitly permits otherwise, and place suitable bypass capacitors close to the device to reduce supply ripple at the amplifier pins.

Use a compact layout around the TO-99 device, keep feedback resistors and input connections short, and avoid routing sensitive input traces next to power-switching nodes. Offset null pins should remain unconnected unless the circuit intentionally uses them for calibration. Because offset voltage and input bias current create errors in precision stages, evaluate resistor thermal effects and source impedance rather than relying only on the device’s nominal offset specification.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not stated in the available manufacturer records. The product is an analog operational amplifier rather than an automotive-qualified device.

Datos verificados el: 2026-11-09 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

AD741JH/+ datasheet AD741JH/+ datasheet pdf AD741JH/+ pinout AD741JH/+ specifications Analog Devices AD741JH/+ AD741JH/+ TO-99 op amp AD741JH/+ 1MHz amplifier AD741JH/+ instrumentation amplifier AD741JH/+ vs AD741LH/+ AD741JH/+ vs AD741KH/+ AD741JH/+ drop-in replacement AD741JH/+ price AD741JH/+ stock what is AD741JH/+

Componentes & términos relacionados

Analog Devices AD741JH/+ AD741 Series AD741J AD741K AD741L AD741S AD741KH/+ AD741LH/+ AD741SH/+ LM741H operational amplifier op amp general-purpose amplifier precision amplifier analog signal conditioning gain-bandwidth product slew rate input offset voltage input offset voltage drift input bias current common-mode rejection ratio CMRR internal compensation short-circuit protection 8-pin TO-99 package TO-99 metal can package surface mount
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ