Analog Devices

AD9200JST - 10-Bit 20 MSPS Low-Power ADC | Analog Devices

N.º de pieza: AD9200JST ✓ Activo
2.7 V to 5.5 V Vdss 48-lead LQFP Package
MOQ: 1 |

AD9200JST Descripción general

The Analog Devices AD9200JST is a 10-bit, 20 MSPS CMOS sampling analog-to-digital converter that operates from a 2.7 V to 5.5 V supply and consumes 80 mW. The device is offered in the AD9200JST 48-lead LQFP configuration and supports single-ended or differential analog inputs through its sampling-and-hold front end.

An ADC is a mixed-signal semiconductor that converts an analog voltage into a digital code for processing, storage, or transmission. The AD9200 belongs to the CMOS ADC hierarchy, combining a sampling-and-hold amplifier, a 10-bit quantizer, digital output circuitry, and an out-of-range indicator. Its 20 MSPS conversion rate makes it suitable for high-speed instrumentation, communications, industrial control, and signal-processing systems that do not require multi-gigahertz sampling rates.

Key features include a 10-bit resolution, a 20 MSPS sampling rate, a 300 MHz on-board sample-and-hold amplifier, and 0.5 LSB differential nonlinearity. The analog input can be configured for either single-ended or differential operation. Additional system features include a power-down or sleep mode, three-state outputs, and an out-of-range indicator. Its CMOS implementation is specified for operation between 2.7 V and 5.5 V, accommodating both lower-voltage and conventional 5 V system rails.

The AD9200 architecture provides a direct interface to digital logic through tri-state output stages. The out-of-range indication provides a hardware signal that can be evaluated by a controller when the input exceeds the converter’s representable range. The manufacturer identifies the AD9200 as pin-compatible with the AD876, supporting legacy-board migration from the older converter while permitting operation at lower supply voltages. The AD9200 family is also available in a 28-lead SSOP configuration, while AD9200JST uses the 48-lead LQFP package.

Typical applications include digital oscilloscope and waveform-capture front ends, communications receivers, data-acquisition modules, industrial process monitoring, closed-loop positioning systems, and laboratory instruments. The 20 MSPS rate is particularly useful for sampling recurring waveforms when a system must preserve sufficient temporal resolution without the complexity, power consumption, and cost of a much faster converter.

Layout should treat the analog input path as a high-speed signal path. Keep analog traces short, place input and decoupling capacitors close to the device, provide a stable reference and supply arrangement, and use appropriate grounding to control switching and digital-coupling effects. The 80 mW converter power specification does not include total board-level dissipation from adjacent regulators, drivers, logic, or support components.

This product record combines the manufacturer’s converter specifications, package information, compatibility details, sourcing evidence, and practical design guidance. It also distinguishes confirmed same-footprint alternatives from broader functional similarities so engineers can assess migration risk before modifying an existing PCB.

Alternativas directas para AD9200JST — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

AD9200JSTZ

✅ Sustitución directa
📦 48-lead LQFP
Same AD9200 10-bit, 20 MSPS function and 48-lead LQFP footprint; ordering-code environmental or termination details require confirmation from the manufacturer ordering table.

📋 Alternativa de referencia (no en el catálogo)

AD9200JST Valores máximos y características eléctricas

Resolución 10 bit
Frecuencia de muestreo 20 MSPS
Converter Type CMOS sampling A/D converter
Power Dissipation 80 mW at 3 V supply
Supply Voltage Range 2.7 V to 5.5 V
Differential Nonlinearity 0.5 LSB
On-Board Sample-and-Hold Bandwidth 300 MHz
Input Configuration Single-ended or differential
Power-Down Mode Sleep mode
Digital Output Mode Three-state output
Out-of-Range Indicator Available
Legacy Compatibility Pin-compatible with AD876
Encapsulado 48-lead LQFP
Tipo de montaje Surface mount
AEC-Q100 Qualification Not applicable

Guía de configuración de pines de AD9200JST 48-lead lqfp

Configuración de pines para AD9200JST (encapsulado 48-lead lqfp). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 48-lead lqfp para AD9200JST

No hay datos detallados de patillaje disponibles para AD9200JST.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

AD9200JST es adecuado para 6 aplicacións: Digital Oscilloscope Front End, Communications Receiver, Industrial Process Monitoring, Data Acquisition Module, Closed-Loop Positioning System, Laboratory Instrumentation.

📺

Digital Oscilloscope Front End

The AD9200JST fits a digital oscilloscope acquisition channel requiring 10-bit resolution and a maximum sample rate of 20 MSPS. Its 20 MSPS rate produces one conversion every 50 ns, allowing repetitive waveforms to be captured with substantially more temporal detail than a low-rate general-purpose ADC. The 300 MHz sample-and-hold amplifier supports higher-frequency input capture, while the 48-lead LQFP allows direct placement beside digital logic. Designers should provide a controlled front-end amplifier, reference, and decoupled analog supply because converter accuracy depends on the complete signal chain rather than the ADC alone.

🌐

Communications Receiver

AD9200JST can serve as the sampling element in a communications receiver that must digitize an intermediate or baseband waveform at rates up to 20 MSPS. Its 10-bit output provides 1,024 code levels, while the selectable differential input allows the converter to operate with a balanced source when appropriately designed. The 2.7 V to 5.5 V supply range can align with mixed-signal receiver architectures. Performance depends on maintaining controlled input amplitude, common-mode range, reference stability, and a return path that limits conversion and coupling noise.

🏭

Industrial Process Monitoring

The AD9200JST is appropriate for industrial monitoring systems that sample rapidly changing sensor or process signals where 10-bit resolution and 20 MSPS are sufficient. Its sleep mode can support intermittent acquisition, and the out-of-range indicator gives a controller an immediate hardware indication of an input beyond the converter range. For factory equipment, the analog input should be isolated from hazardous or noisy sources through suitable signal conditioning. A regulated low-noise supply, local bypass capacitors, and careful grounding are required to prevent process transients from disturbing conversion accuracy.

🖥️

Data Acquisition Module

A compact data-acquisition module can use AD9200JST to convert recurring analog waveforms into digital data for storage or upstream processing. The 10-bit, 20 MSPS specification provides a practical balance between sample density, converter complexity, and the 80 mW power figure specified at a 3 V supply. Differential input operation can improve noise immunity when the module is installed away from the sensor source. System designers should evaluate analog bandwidth, acquisition timing, output bus contention, and data-transfer bandwidth because the converter cannot increase the information content of an improperly conditioned signal.

⚡

Closed-Loop Positioning System

AD9200JST can sample feedback signals in a closed-loop motor or positioning controller when the required bandwidth is compatible with a 20 MSPS conversion rate. The 10-bit resolution may be adequate for coarse feedback, oversampling, interpolation, or systems in which a separate sensor provides higher-resolution position information. Differential input can help reject common-mode disturbance in industrial equipment. The converter must be synchronized with the control loop and surrounded by protection, filtering, and grounding appropriate to the motor environment; the ADC alone cannot compensate for excessive noise or bandwidth.

🔧

Laboratory Instrumentation

The AD9200JST can serve as the ADC in laboratory instruments that capture repetitive analog waveforms for analysis, calibration, or automated testing. A 20 MSPS rate is useful when the instrument needs clear time-domain behavior without the cost and power of a high-speed converter family. The out-of-range output simplifies front-panel or system-level overload reporting, while sleep mode can reduce consumption between measurements. Instrument designers should characterize noise, linearity, reference drift, and input settling as a complete channel to determine whether 10-bit resolution satisfies the measurement specification.

Resumen de productos recomendados

AD9200JST Analog Devices Se usa en: Digital Oscilloscope Front End, Communications Receiver, Industrial Process Monitoring, Data Acquisition Module, Closed-Loop Positioning System, Laboratory Instrumentation AD876 Legacy pin-compatible converter reference Se usa en: Digital Oscilloscope Front End, Communications Receiver, Industrial Process Monitoring, Data Acquisition Module, Closed-Loop Positioning System, Laboratory Instrumentation
What are the key specifications of AD9200JST that engineers should know?
The AD9200JST is a 10-bit, 20 MSPS CMOS ADC with an 80 mW power specification at a 3 V supply. According to the Analog Devices AD9200 Data Sheet, Rev. E, it supports a 2.7 V to 5.5 V supply range, 0.5 LSB differential nonlinearity, a 300 MHz sample-and-hold front end, and single-ended or differential input configurations. It is packaged in a 48-lead LQFP and also provides sleep mode, three-state outputs, and an out-of-range indicator.
What is the operating voltage of AD9200JST?
The AD9200JST operates from 2.7 V to 5.5 V. This range is stated in the Analog Devices AD9200 Data Sheet, Rev. E, and supports designs using either a 3 V rail or a 5 V supply. The 80 mW power figure is specified at a 3 V supply, so power consumption should not be assumed to remain constant when the supply voltage is increased. Follow the datasheet’s recommended supply and decoupling arrangements for the voltage selected in the final system.
What resolution and sampling rate does AD9200JST provide?
The AD9200JST provides 10-bit resolution at a maximum sampling rate of 20 MSPS. According to the Analog Devices AD9200 Data Sheet, Rev. E, it is a CMOS sampling analog-to-digital converter designed for high-speed signal acquisition. A 20 MSPS rate allows each conversion to represent a 50 ns interval, while the 10-bit output provides 1,024 possible digital codes per sample. Its 300 MHz on-board sample-and-hold amplifier helps preserve high-frequency input behavior during acquisition.
Where can I download the AD9200JST datasheet PDF?
The official AD9200JST datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD9200.pdf. The manufacturer’s AD9200 product page also provides documentation, software, tools, and product-selection information. The AD9200JST ordering code identifies the 48-lead LQFP configuration, so engineers should verify that package and temperature information against the ordering table before releasing a design.
Where can I find the AD9200JST pinout?
The authoritative AD9200JST pin assignment is shown in the pin-description table and package drawing of the Analog Devices AD9200 Data Sheet, Rev. E. Use that table when assigning PCB nets because the AD9200 family also exists in a 28-lead SSOP package, while AD9200JST is the 48-lead LQFP configuration. The manufacturer product page at https://www.analog.com/en/products/ad9200.html links to the same technical documentation and supporting design resources.
Can AD876 replace AD9200JST in an existing design?
The Analog Devices AD9200 Data Sheet, Rev. E, identifies the AD9200 as pin-compatible with the AD876, allowing older designs to migrate to lower supply voltages. Compatibility does not mean every electrical specification is identical, so the AD876 data sheet must be checked for supply limits, input range, timing, output coding, and performance before substitution. The confirmed package and parameter equivalence for AD9200JST replacement parts should also be confirmed separately.
What can replace AD9200JST on the same PCB footprint?
The confirmed same-package alternative identified for AD9200JST is AD9200JSTZ, which uses the same 48-lead LQFP footprint and retains the AD9200’s 10-bit, 20 MSPS conversion function. A sufficient number of independently confirmed drop-in equivalents could not be established from the available manufacturer and comparison information. Request a component cross-reference through the Request a Quote form on this page, and require the supplier to confirm footprint, pin functions, timing, input range, temperature grade, and supply compatibility before using another candidate.
Is AD9200JST suitable for communications and industrial signal acquisition?
Yes, AD9200JST is suitable for communications and industrial acquisition systems that require more than 10-bit resolution and a conversion rate up to 20 MSPS. Its 2.7 V to 5.5 V operating range, selectable single-ended or differential input, and 80 mW power specification at 3 V are useful in compact mixed-signal equipment. The Analog Devices AD9200 Data Sheet, Rev. E, also identifies an out-of-range indicator that can simplify input-range supervision.
AD9200JST vs AD9200JSTZ — which is the better choice?
AD9200JST and AD9200JSTZ are closely related 48-lead LQFP AD9200 configurations, but the ordering table must be used to confirm their environmental and termination differences before interchange. The core converter function remains a 10-bit, 20 MSPS CMOS ADC according to the Analog Devices AD9200 Data Sheet, Rev. E. For an existing board, verify the exact suffix, temperature range, lead finish, and availability rather than relying only on the shared package name.
When should I choose AD9200JST instead of a faster ADC?
Choose AD9200JST when the system needs moderate bandwidth, 10-bit resolution, and a conversion rate no higher than 20 MSPS. Its 80 mW power specification at 3 V and 2.7 V to 5.5 V supply range can simplify compact analog acquisition systems. A higher-speed ADC is preferable only when the input bandwidth, waveform timing, channel count, or conversion latency cannot be handled by a 20 MSPS converter.
How should the AD9200JST analog input be configured?
The AD9200JST sample-and-hold input can be configured for either single-ended or differential operation. Analog Devices states this capability in the AD9200 Data Sheet, Rev. E. Differential operation generally helps reject common-mode voltage and noise, but it requires a balanced input network with correct impedance, amplitude, and common-mode limits. Use the manufacturer’s input-circuit examples and the pin-description table when determining which input pins, bypass capacitors, and signal-source connections to use.
What are the power and thermal considerations for AD9200JST?
The AD9200JST dissipates 80 mW when operated from a 3 V supply, according to the Analog Devices AD9200 Data Sheet, Rev. E. This is the converter’s specified operating power, not the complete thermal load of a finished board. The 48-lead LQFP provides a surface-mount thermal path, but enclosure temperature, copper area, adjacent heat sources, and the maximum ambient temperature must be considered. The datasheet supply arrangement should be followed to maintain performance and reliability.
Does AD9200JST support power-down and tri-state output control?
Yes, the AD9200JST includes a power-down or sleep mode and three-state outputs. Analog Devices lists both functions in the AD9200 Data Sheet, Rev. E. Sleep mode can reduce consumption when acquisition is not continuously required, while three-state outputs can place the digital bus in a high-impedance state when multiple converters share control lines. The designer should still verify the required logic levels, transition timing, and power-state sequencing in the detailed datasheet tables.
What is the best Analog Devices equivalent for AD9200JST?
The best confirmed same-footprint equivalent is the Analog Devices AD9200JSTZ because it is identified in comparison information and uses the AD9200 48-lead LQFP platform. A cross-brand replacement could not be verified as both pin-compatible and parametrically equivalent. The Analog Devices AD9200 Data Sheet, Rev. E, specifically confirms compatibility with the AD876, but that statement alone does not establish that an AD876 package and every electrical parameter matches AD9200JST.
Where can I buy AD9200JST and what is its lead time?
Use the Request a Quote form on this page to request AD9200JST pricing, current inventory, and production lead time without relying on stale catalog figures. The Request a Quote form also allows you to specify the required quantity, package, temperature grade, and delivery target. Because converter availability can vary with order quantity and lifecycle status, procurement should request a written confirmation for the exact AD9200JST ordering code rather than substituting a different package suffix.

Datos de referencia de ingeniería para AD9200JST — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose AD9200JST when a compact data-acquisition system needs a 10-bit converter at up to 20 MSPS, operation from a 2.7 V to 5.5 V rail, and the 48-lead LQFP footprint. It is particularly suitable for repetitive-waveform capture, communications intermediate-signal acquisition, industrial monitoring, and laboratory instrumentation where the 300 MHz sample-and-hold front end is useful. AD9200JSTZ is the closest confirmed same-package option when its ordering-code details meet the environmental and sourcing requirements. The AD876 is relevant when migrating a legacy pin-compatible AD9200 design, but it should not be treated as a universal AD9200JST substitute without verifying package, timing, input range, output coding, and supply requirements. A higher-speed ADC is appropriate only when the signal bandwidth or acquisition timing exceeds what a 20 MSPS converter can support.

Comparación con alternativas

Parámetro Este producto AD9200JSTZ
Brand Analog Devices Analog Devices
Package 48-lead LQFP 48-lead LQFP
Resolution 10 bit 10 bit
Sampling Rate 20 MSPS 20 MSPS

Diferenciadores clave

  • Provides a complete 10-bit acquisition function at 20 MSPS (frente a AD9200JSTZ)
  • Supports a broad 2.7 V to 5.5 V operating range (frente a AD876)
  • Combines a 300 MHz sample-and-hold front end with selectable input modes (frente a AD9200JSTZ)

Notas de diseño

Keep the AD9200JST analog input traces short and route them away from digital output and clock-return paths. Place input-network components and bypass capacitors close to their associated pins, and provide a low-impedance ground return for both the analog and digital sections. The 300 MHz sample-and-hold bandwidth makes small layout discontinuities more significant than they would be in a slow-precision converter. Use the Analog Devices AD9200 Data Sheet, Rev. E, pin-description and application-circuit information when finalizing trace geometry.

Decouple the 2.7 V to 5.5 V analog supply locally and route supply current away from sensitive input and reference nodes. The converter’s 80 mW rating is specified at a 3 V supply, and total system dissipation also includes support circuitry. Estimate junction and board temperature using the actual ambient temperature, copper area, airflow, and dissipation of nearby parts. Verify startup, shutdown, and sleep-mode sequencing against the manufacturer’s recommended circuit before adding external control logic.

Choose an input architecture appropriate for either single-ended or differential operation and keep the source impedance and settling time consistent with the 20 MSPS sampling rate. Differential operation can suppress common-mode noise, but incorrect common-mode voltage, impedance imbalance, or source return can degrade performance. The AD9200 supports an out-of-range indicator, but software should still validate full-scale headroom and clipping behavior. Measure the complete analog channel against the required noise and linearity targets rather than assuming nominal ADC resolution alone.

Do not substitute the 28-lead SSOP AD9200 configuration for the 48-lead LQFP AD9200JST without redesigning the PCB. Also confirm that the converter’s tri-state outputs, clock interface, input range, and reference arrangement match the original design. The manufacturer identifies the AD9200 as pin-compatible with the AD876, but a board migration should still verify supply limits, timing, output coding, and analog performance rather than relying on package compatibility alone.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The AD9200JST is a general-purpose commercial mixed-signal converter, so AEC-Q100 qualification is not applicable. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or declaration.

Datos verificados el: 2026-11-15 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

AD9200JST datasheet AD9200JST pinout AD9200JST datasheet pdf AD9200JST specifications AD9200JST 20 MSPS ADC AD9200JST 48 LQFP AD9200JST equivalent AD9200JST replacement AD9200JST vs AD9200JSTZ AD9200JST price AD9200JST stock Analog Devices AD9200JST

Componentes & términos relacionados

Analog Devices AD9200JST AD9200JSTZ AD876 10-bit ADC CMOS ADC analog-to-digital converter mixed-signal semiconductor 20 MSPS sample-and-hold amplifier single-ended input differential input differential nonlinearity out-of-range indicator three-state output sleep mode 48-lead LQFP LQFP package family surface mount 2.7 V to 5.5 V supply RoHS REACH AEC-Q100 data acquisition digital oscilloscope
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ