Analog Devices

AD7482BST - 12-Bit 3 MSPS SAR ADC | Analog Devices

N.º de pieza: AD7482BST ✓ Activo
48-lead LQFP Package
MOQ: 1 |

AD7482BST Descripción general

The Analog Devices AD7482BST is a 12-bit, 3 MSPS successive-approximation register ADC with a parallel interface, supplied in a 48-lead LQFP package. It combines a 12-bit conversion resolution, a maximum throughput rate of 3 MSPS, and analog input bandwidth above 40 MHz for precision signal-acquisition systems.

A successive-approximation ADC, or SAR ADC, converts an analog voltage by comparing it with a reference through a series of successive bit decisions. The AD7482 belongs to the ADC hierarchy, which includes data converters, analog-to-digital converters, and signal-chain semiconductors. Its parallel interface supports direct connection to digital control logic rather than relying on a serial protocol.

The principal feature is a conversion throughput of up to 3 MSPS with 12-bit resolution. Analog Devices describes the device as low power and high speed, with a low-noise, wide-bandwidth track-and-hold circuit that can handle input frequencies above 40 MHz. These characteristics support sampled measurement, instrumentation, communications, industrial control, and embedded signal-processing applications.

The internal architecture uses the AD7482 SAR conversion core and an on-chip sample-and-hold function. The wide input bandwidth allows the sampling network to acquire high-frequency signals, while the 12-bit output defines the numerical resolution available to downstream logic. Because the interface is parallel, the converter can require more board routing than a serial ADC, but it reduces the need to multiplex or deserialize data before capture.

Typical uses include industrial measurement systems, waveform capture, communications equipment, control loops, and data-acquisition front ends. The AD7482BST is especially appropriate when throughput and input bandwidth matter more than a serial bus or exceptionally small package size. A suitable design must also account for reference accuracy, source impedance, acquisition time, digital timing, and analog trace integrity.

For PCB implementation, place the analog input, reference, and decoupling connections close to the device, keep digital return currents away from sensitive analog nodes, and provide a quiet reference source. Confirm setup and conversion timing against the manufacturer datasheet before using the parallel outputs as system data-valid and state signals.

This product page combines the manufacturer’s AD7482 specifications, practical acquisition guidance, verified family alternatives, and sourcing information for engineers designing around the 48-lead LQFP footprint. It is intended to accelerate component selection while keeping critical design assumptions visible.

Alternativas directas para AD7482BST — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con AD7482BST (mismo factor de forma y huella) — difiere en Package.

Analog Devices
Package: 48-pin LQFP
Comparar con AD7482BST →

AD7482ASTZ

✅ Sustitución directa
📦 48-lead LQFP
Same AD7482 family and 12-bit SAR ADC function; ordering-code temperature or grade parameters require verification, with no stated performance change

📋 Alternativa de referencia (no en el catálogo)

AD7482BSTZ

✅ Sustitución directa
📦 48-lead LQFP
Same AD7482 family and 12-bit SAR ADC function; lead-finish ordering parameter differs, with no stated functional performance change

📋 Alternativa de referencia (no en el catálogo)

AD7482BST Valores máximos y características eléctricas

Resolución 12 bit
Conversion Type Successive approximation register (SAR)
Maximum Throughput Rate 3 MSPS
Analog Input Bandwidth Above 40 MHz
Tipo de interfaz Parallel
Analog Input Channels 1 channel
Track-and-Hold Circuit On-chip, low-noise, wide-bandwidth
Encapsulado 48-lead LQFP
Package Body Size 7 mm x 7 mm
Tipo de montaje Surface mount

Guía de configuración de pines de AD7482BST 7 mm x 7 mm

Configuración de pines para AD7482BST (encapsulado 7 mm x 7 mm). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 7 mm x 7 mm para AD7482BST

No hay datos detallados de patillaje disponibles para AD7482BST.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

AD7482BST es adecuado para 6 aplicacións: Industrial Process Measurement, Communications Signal Capture, Waveform Data Acquisition, Precision Control Loops, Test and Measurement Equipment, Embedded Sensor Acquisition.

🏭

Industrial Process Measurement

The AD7482BST fits industrial process-monitoring front ends that need faster sampling than a slow general-purpose ADC. Its 12-bit resolution and throughput of up to 3 MSPS permit dense waveform capture, while the analog input bandwidth above 40 MHz provides acquisition capability beyond the converter’s base sample rate. Use a low-drift reference, a suitable input amplifier, and close placement of bypass capacitors to preserve 12-bit measurement quality. The parallel interface can feed a controller or capture logic directly, although its 48-lead footprint requires careful planning. Where process signals change rapidly, verify acquisition time and settling against the source impedance rather than relying on bandwidth alone.

🌐

Communications Signal Capture

The AD7482BST is appropriate for communications equipment that samples intermediate-frequency or other analog waveforms before digital processing. Its 3 MSPS maximum throughput supports discrete-time conversion, and the track-and-hold circuit can handle input frequencies above 40 MHz. This bandwidth is particularly useful when several times the signal frequency must be sampled. The 12-bit parallel output exposes the converted word directly to FPGA or logic devices, while the wide LQFP package requires a deliberate fanout strategy. Designers should control clock and digital-edge crosstalk, maintain a quiet reference, and confirm that the input network settles within the specified acquisition interval.

📺

Waveform Data Acquisition

For waveform data-acquisition systems, the AD7482BST combines 12-bit resolution with a maximum 3 MSPS throughput rate, allowing repeated samples of changing analog signals to be captured by parallel logic. Its on-chip track-and-hold circuit and input bandwidth above 40 MHz support broader signal content than the sample rate alone would imply. The design should include an input range that matches the ADC, anti-alias filtering appropriate to the selected rate, and a reference with low enough noise for the intended resolution. A capture controller must also handle the parallel data-valid and state timing shown in the manufacturer datasheet.

🔧

Precision Control Loops

The AD7482BST can serve as the sensing element in a sampled control system requiring regular analog measurements and rapid control updates. A 3 MSPS conversion rate permits one or more feedback measurements during each control interval, while the 12-bit word supplies sufficient resolution for many position, level, and feedback tasks. The parallel interface allows direct connection to digital control logic, but loop design must account for conversion latency and the acquisition network’s settling behavior. Stable references and low-noise grounding are essential because supply and reference variation propagate directly into the control measurement.

📺

Test and Measurement Equipment

The AD7482BST is suitable for compact test and measurement instruments that need high-speed sampled readings without a complex serial conversion interface. The 12-bit resolution provides a practical balance between measurement detail and conversion speed, while throughput up to 3 MSPS supports time-domain inspection. The wide-bandwidth track-and-hold circuit can capture higher-frequency content when the test point permits it. Instrument designers should calibrate gain and offset, use a low-noise reference, and separate analog input routing from the 12-bit parallel bus. Input conditioning must also provide the correct range and source impedance for reliable conversion results.

🧩

Embedded Sensor Acquisition

The AD7482BST can be used in embedded acquisition systems for rapidly changing sensor outputs when the application requires more than a low-rate multiplexed converter. Its 3 MSPS capability captures successive sensor values for filtering, thresholding, or event analysis, and the 12-bit parallel output allows efficient transfer into embedded digital logic. The input bandwidth above 40 MHz is not normally required for slow sensors, but it provides flexibility when the same board also handles higher-frequency conditioning stages. Keep sensor excitation and converter routing separated, use local bypass capacitors, and verify settling at the programmed sampling rate to maintain consistent results.

Resumen de productos recomendados

AD7482ASTZ Same-family ADC replacement candidate Se usa en: Industrial Process Measurement, Communications Signal Capture, Waveform Data Acquisition, Precision Control Loops, Test and Measurement Equipment, Embedded Sensor Acquisition AD7482BSTZ Same-family lead-finish variant Se usa en: Industrial Process Measurement, Communications Signal Capture, Waveform Data Acquisition, Precision Control Loops, Test and Measurement Equipment, Embedded Sensor Acquisition
What is the AD7482BST?
The AD7482BST is a 12-bit, 3 MSPS successive-approximation ADC with a parallel interface in a 48-lead LQFP package. According to the Analog Devices AD7482 datasheet, Revision B, it combines high-speed sampling, low power, and a wide-bandwidth on-chip track-and-hold circuit for instrumentation, communications, and industrial signal-acquisition designs.
What is the conversion speed of AD7482BST?
The AD7482BST supports throughput rates of up to 3 MSPS with 12-bit resolution. According to the Analog Devices AD7482 product page and datasheet, Revision B, this speed makes the converter suitable for sampled waveforms and measurement systems that require substantially more sampling speed than general-purpose slow ADCs while retaining a parallel digital interface.
What input bandwidth does AD7482BST support?
The AD7482BST contains a low-noise, wide-bandwidth track-and-hold circuit that can handle frequencies in excess of 40 MHz. Analog Devices identifies this wide analog bandwidth in the AD7482 product description. The bandwidth permits acquisition of higher-frequency signals, although source-impedance, acquisition-time, and settling requirements must still be evaluated for the selected sampling rate.
Where can I download the AD7482BST datasheet PDF?
The official AD7482BST datasheet is available through the Analog Devices AD7482 product page at analog.com. The manufacturer identifies the document as the AD7482 Data Sheet, Revision B. Use its pin-description table, timing diagrams, and recommended application circuit when assigning the 48 LQFP pins and validating acquisition and conversion timing.
Where can I find the AD7482BST pinout?
The AD7482BST pinout is documented in the pin-description table of the Analog Devices AD7482 datasheet, Revision B. The device uses a 48-lead LQFP package. Use that table when assigning analog inputs, reference connections, supplies, ground pins, digital outputs, and control signals; the exposed package information should also be checked against the selected board footprint.
Is AD7482BST suitable for high-speed data acquisition?
The AD7482BST is suitable for data-acquisition systems requiring up to 3 MSPS and 12-bit resolution. Its wide-bandwidth track-and-hold circuit can handle frequencies above 40 MHz, allowing it to sample waveforms beyond the converter’s fundamental Nyquist requirement. Source impedance, reference quality, acquisition timing, and analog-layout noise determine whether the full system performance meets the design target.
What are the key specifications of AD7482BST that engineers should know?
The key AD7482BST specifications are 12-bit resolution, throughput up to 3 MSPS, a parallel interface, and analog input bandwidth above 40 MHz. The Analog Devices datasheet, Revision B, also identifies a single ADC channel and an on-chip low-noise, wide-bandwidth track-and-hold circuit. These parameters position the part for rapid sampling with direct parallel-data capture.
What is the difference between AD7482BST and AD7482AST?
The AD7482BST and AD7482AST are closely related Analog Devices 12-bit SAR ADC variants, but their ordering codes can distinguish electrical or temperature options in addition to the package designation. For an existing 48-lead LQFP design, verify the complete part number, temperature grade, supply range, and datasheet ordering table before treating AD7482AST as a replacement. The package alone does not establish full qualification.
When should I choose AD7482BST over another 12-bit ADC?
Choose the AD7482BST when the design needs a single-channel, 12-bit SAR ADC with throughput up to 3 MSPS, input bandwidth above 40 MHz, and a parallel interface. It is particularly suitable where acquisition speed and bandwidth are priorities and the board can accommodate the 48-lead LQFP interface. A serial ADC may be preferable when PCB area and pin count dominate.
What is the best drop-in replacement for AD7482BST?
The closest documented AD7482BST replacements are the AD7482ASTZ and AD7482BSTZ family variants, subject to confirmation of the exact package, lead finish, temperature grade, and ordering code. According to the AD7482BSTZ comparison listing, these devices have consistent terminals and package characteristics. Verify every ordering option against the manufacturer datasheet before production use.
Can AD7482ASTZ replace AD7482BST?
The AD7482ASTZ can be considered for an AD7482BST board only after its package dimensions, pin arrangement, temperature grade, and electrical limits have been matched to the installed part. The cross-reference listing describes consistent terminals and package characteristics and identifies it as a complete replacement candidate. Production approval should also include a bill-of-materials audit and manufacturer ordering-table review.
Can AD7482BSTZ replace AD7482BST?
The AD7482BSTZ is a documented same-family replacement candidate for the AD7482BST because the comparison information identifies consistent package characteristics and terminal arrangements. Before substitution, confirm the exact lead configuration, operating-temperature grade, electrical characteristics, and availability required by the design. A zero-modification footprint match does not by itself qualify every ordering code.
What Analog Devices equivalent is best for AD7482BST designs?
The best Analog Devices family equivalent is normally selected from AD7482ASTZ or AD7482BSTZ because the published cross-reference information identifies compatible terminals and package characteristics. The correct choice depends on the AD7482BST ordering code, temperature grade, package details, and required production conditions. Compare the manufacturer part-selection table rather than substituting on the base device name alone.
Where can I buy AD7482BST online?
AD7482BST can be requested through the Request a Quote form on this page, which is the appropriate route for current commercial terms, availability, and lead-time confirmation. The component is listed in production by Analog Devices. Submit the exact ordering code AD7482BST and state the required quantity and packaging needs so the quotation can be matched precisely.
What is the lead time for AD7482BST?
Current AD7482BST lead time depends on order quantity, package configuration, and supply conditions and should be confirmed through the Request a Quote form on this page. Analog Devices lists the AD7482 family in production, but production status does not by itself guarantee a fixed delivery interval for every quantity. Include the requested schedule in the quotation request.
How should AD7482BST be handled for low-noise measurement?
Use a quiet, low-impedance reference, place input and reference decoupling close to the device, and keep parallel digital return currents away from the analog input path. The Analog Devices AD7482 datasheet, Revision B, identifies the track-and-hold circuit as low noise and wide bandwidth, but layout, source settling, grounding, and clock-edge placement remain critical to achieving the intended resolution.

Datos de referencia de ingeniería para AD7482BST — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the AD7482BST when the design requires a single-channel, 12-bit SAR ADC with up to 3 MSPS throughput, analog input bandwidth above 40 MHz, and direct parallel output. It is well suited to industrial measurement, communications signal capture, waveform acquisition, and embedded control systems where the 48-lead LQFP footprint is acceptable. Consider AD7482ASTZ when its ordering-code temperature or grade configuration satisfies the design and the manufacturer ordering table confirms compatibility. Consider AD7482BSTZ when its lead-finish configuration is required by production or assembly criteria. Neither alternative changes the documented 12-bit resolution or 3 MSPS core performance. A serial ADC may be preferable when PCB area, pin count, or bus simplicity outweighs the AD7482BST’s parallel-interface benefits.

Comparación con alternativas

Parámetro Este producto AD7482ASTZ AD7482BSTZ
Brand Analog Devices Analog Devices Analog Devices
Package 48-lead LQFP 48-lead LQFP 48-lead LQFP
Resolution 12 bit 12 bit 12 bit
Conversion Type Successive approximation register (SAR) Successive approximation register (SAR) Successive approximation register (SAR)
Maximum Throughput Rate 3 MSPS 3 MSPS 3 MSPS
Analog Input Bandwidth Above 40 MHz Above 40 MHz Above 40 MHz
Interface Parallel Parallel Parallel
Analog Input Channels 1 channel 1 channel 1 channel
Track-and-Hold Circuit On-chip, low-noise, wide-bandwidth On-chip, low-noise, wide-bandwidth On-chip, low-noise, wide-bandwidth

Diferenciadores clave

  • High-speed wide-bandwidth sampling in a 12-bit SAR converter (frente a AD7482ASTZ)
  • Direct parallel data capture (frente a AD7482BSTZ)
  • On-chip wide-bandwidth track-and-hold circuit (frente a AD7482ASTZ)

Notas de diseño

Route the analog input and reference connections as short, quiet traces and place their bypass capacitors close to the corresponding device pins. The AD7482 uses a parallel output bus, so clock and data-return currents can couple into the sampling node if the analog and digital paths share board area. Keep the converter and its input network away from switching inductors and high-current return paths, and use the pin-description table in the manufacturer datasheet to distinguish analog, reference, supply, and digital connections.

Do not assume that the 3 MSPS conversion rate guarantees valid results for every source impedance. The sample-and-hold capacitor must recharge and settle during each acquisition interval, and the input amplifier or sensor must have sufficiently low output impedance at the relevant frequency. Use the Analog Devices acquisition-time and input-capacitance guidance to select the driving network, and validate settling with the intended full-scale input rather than a small test signal.

Treat the 12-bit parallel outputs as a simultaneous high-speed bus even though the maximum conversion rate is 3 MSPS. Match output timing to the receiving logic, keep the bus traces short, and use a deliberate return path beneath or beside the data routing. Avoid unnecessary vias, place digital termination according to the system architecture, and separate clock routing from sensitive reference and analog-input nodes. Grounding and return-current decisions can materially affect the noise and timing margin of the capture system.

Provide local, low-inductance bypass connections at the device supply pins and use a reference source with noise and impedance appropriate for a 12-bit converter. Reference error can appear directly as gain and offset error, while reference noise contributes to the converter’s noise floor. Confirm capacitor voltage ratings, stability requirements, and the recommended reference network in the manufacturer application circuit rather than substituting a generic capacitor or reference arrangement without checking load behavior.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

Compliance declarations must be confirmed from the manufacturer’s current product documentation or declaration for the exact ordering code.

Datos verificados el: 2026-11-18 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

AD7482BST datasheet AD7482BST specifications AD7482BST pinout AD7482BST datasheet pdf AD7482BST equivalent AD7482BST replacement AD7482BST cross reference AD7482BST vs AD7482ASTZ AD7482BST price AD7482BST stock Analog Devices AD7482BST AD7482BST 3 MSPS ADC AD7482BST 48 LQFP AD7482BST application circuit

Componentes & términos relacionados

Analog Devices AD7482 AD7482BST AD7482ASTZ AD7482BSTZ successive-approximation register ADC SAR ADC analog-to-digital converter data converter signal-chain semiconductor 12-bit resolution 3 MSPS throughput analog input bandwidth 40 MHz input bandwidth track-and-hold circuit parallel interface 48-lead LQFP LQFP package family surface-mount package industrial process measurement communications signal capture waveform data acquisition embedded sensor acquisition RoHS REACH
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ