AD9577BCPZ - Dual-PLL 637.5MHz Clock Generator | Analog Devices
N.º de pieza: AD9577BCPZ ✓ ActivoAD9577BCPZ Descripción general
A network clock generator is a specialized timing IC that converts one reference clock into synchronized clock signals for communication equipment. In the semiconductor hierarchy, the AD9577 belongs to the clock and timing IC family, where its phase-locked loops multiply and translate the input frequency while distributing the resulting clock through configurable output stages. This architecture reduces the number of separate oscillators and frequency dividers required in systems that need multiple related clock domains.
The AD9577's dual-PLL architecture supports multiple clock-generation paths within one device. Its output frequency reaches 637.5 MHz, while the accepted reference input extends from 19.44 MHz to 27 MHz. I2C programming allows a host controller to configure operating parameters rather than relying entirely on fixed hardware settings. The 40-lead LFCSP-WQ package also includes an exposed thermal pad for improved heat transfer from the device to the PCB.
The AD9577 is intended for networking infrastructure where a stable, programmable clock is required at the system level. Appropriate implementations include Ethernet line cards, PCI Express equipment, SONET/SDH transport systems, clock-distribution networks, and test equipment requiring a low-jitter synthesized reference. Its multioutput clock-generator function is combined with two internal PLL cores so that the system can derive related outputs from a common reference while controlling frequency and format through the serial interface.
Because the AD9577 is a high-speed mixed-signal timing device, PCB layout is as important as electrical configuration. Keep crystal, reference-clock, decoupling, and clock-output paths short, preserve controlled differential impedance, and avoid routing outputs beneath noisy power-converter stages. The exposed pad should be connected to the appropriate ground plane with multiple low-impedance vias according to the land pattern and assembly requirements in the manufacturer datasheet.
The main design trade-off is integration versus configurability. A dual-PLL clock generator simplifies board partitioning and provides serial control, but it also requires careful reference-clock stability, power sequencing, output-format configuration, and layout validation. Confirm the required output standard, reference frequency, jitter target, voltage rails, and enable sequence before releasing the PCB.
This product page combines the AD9577 architecture, operating-frequency details, package information, replacement analysis, comparison data, and practical PCB guidance. It is intended to help engineers determine whether the AD9577BCPZ fits a network-clock architecture and to identify the closest documented alternatives without overlooking programming, package, or timing constraints.
Alternativas directas para AD9577BCPZ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
No hay alternativas directas disponibles para este producto.
Solicitar alternativasAD9577BCPZ Especificaciones
| Product Type | Dual-PLL network clock generator |
| PLL Core Count | 2 internal PLL cores |
| Reference Input Frequency | 19.44 MHz to 27 MHz |
| Maximum Clock Output Frequency | 637.5 MHz |
| Output Count | 1 output |
| Control Interface | I2C |
| Programmable Output Frequencies | Supported by I2C programming |
| Programmable Output Formats | Supported by I2C programming |
| Clock Architecture | Multioutput clock generator with PLL1 and PLL2 |
| Encapsulado | 40-lead LFCSP-WQ, 6 mm x 6 mm |
| Exposed Thermal Pad | Included in 40-lead LFCSP-WQ package |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de AD9577BCPZ 40-lead lfcsp-wq, 6 mm x 6 mm
Configuración de pines para AD9577BCPZ (encapsulado 40-lead lfcsp-wq, 6 mm x 6 mm). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para AD9577BCPZ.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
AD9577BCPZ es adecuado para 6 aplicacións: Ethernet Network Clocking, PCI Express Reference Distribution, SONET and SDH Transport Equipment, Synchronous Test and Measurement Systems, Clock Distribution Backplanes, Telecom Line-Card Timing.
Ethernet Network Clocking
The AD9577BCPZ fits Ethernet equipment that requires a common, programmable timing reference across multiple clock domains. Its dual-PLL architecture accepts a 19.44 MHz to 27 MHz source and can generate clocks up to 637.5 MHz, while I2C programming allows output frequency and format to be configured by the system controller. Placing the device near the network-processing electronics can reduce trace length and timing variation, but the reference source must remain stable and the clock outputs must use controlled-impedance routing. The designer should also validate output jitter against the applicable Ethernet interface requirement.
Recomendado
PCI Express Reference Distribution
The AD9577BCPZ can support PCI Express systems that need deterministic clock generation from a shared reference. Its two PLL cores provide independent frequency-generation paths, and the maximum output frequency of 637.5 MHz covers high-speed clocking requirements associated with modern data links. I2C control permits configuration by firmware or another bus master, reducing discrete programming logic. The implementation must match the required PCIe reference-clock format, provide clean supply rails, and preserve short return paths for every high-speed clock output.
Recomendado
SONET and SDH Transport Equipment
The AD9577BCPZ is suitable for transport systems requiring stable, configurable clocks for line-card timing. A reference input of 19.44 MHz to 27 MHz and an output capability up to 637.5 MHz give designers room to translate a board-level reference into the required network clock. The two internal PLLs allow related outputs to be managed from one device, while I2C programming supports controlled configuration during system initialization. For production designs, verify jitter, output levels, clock-format settings, and reference quality against the optical or electrical transport standard being implemented.
Recomendado
Synchronous Test and Measurement Systems
The AD9577BCPZ can serve as a programmable clock source in test equipment where several measurements must share a stable timing relationship. Its I2C-programmable frequencies and formats make it possible to configure a clock for different instrument modes without changing the board layout. The dual-PLL structure can support related conversion or interface clocks derived from a 19.44 MHz to 27 MHz reference. In an instrument chassis, isolate the reference from noisy digital activity, use low-noise supplies, and validate deterministic jitter and edge quality at the connector and measurement front end.
Recomendado
Clock Distribution Backplanes
The AD9577BCPZ can provide the synthesized source for a backplane that distributes related clocks to communication modules. Its maximum 637.5 MHz output supports demanding logic domains, while the programmable interface simplifies board-level configuration and manufacturing test. The device should be positioned near the clock fanout network to limit loss, jitter accumulation, and susceptibility to crosstalk. Differential clock routing, continuous reference planes, symmetric termination, and isolated supply filtering are essential when the backplane contains switching converters or high-speed data traffic.
Recomendado
Telecom Line-Card Timing
The AD9577BCPZ fits telecom line cards that require centralized synthesis and serialization of network clocks. Two PLL cores permit multiple timing paths from one reference domain, and the 19.44 MHz to 27 MHz input range covers common line-card reference sources. I2C control allows the host processor to select frequencies and output formats during initialization or operational reconfiguration. The board implementation should include local decoupling, a clean crystal or oscillator reference, short reference traces, and clock outputs routed away from noisy transceiver sections to preserve edge quality.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para AD9577BCPZ — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto |
|---|---|
| Brand | Analog Devices |
| Package | 40-lead LFCSP-WQ, 6 mm x 6 mm |
| Reference Input Frequency | 19.44 MHz to 27 MHz |
| Maximum Output Frequency | 637.5 MHz |
| Output Count | 1 output |
| PLL Core Count | 2 PLL cores |
| Control Interface | I2C |
| Output Configuration | I2C-programmable frequencies and formats |
| Primary Application | Network clocking |
| Exposed Thermal Pad | Included |
Diferenciadores clave
- Dual-PLL network-clock integration (frente a AD9576BCPZ)
- Programmable clock configuration (frente a AD9576BCPZ)
- Compact 40-lead surface-mount implementation (frente a Discrete oscillator and PLL approach)
Notas de diseño
Treat the reference clock as a high-speed signal rather than a low-frequency utility clock. Place the oscillator or clock source close to the relevant input, keep the route short, provide a continuous return plane, and avoid crossings above split power or ground planes. The AD9577 can generate clocks up to 637.5 MHz, so impedance discontinuities and long stubs can degrade edge quality and phase noise even when the nominal frequency setting is correct.
Use the manufacturer LFCSP-WQ land pattern and exposed-pad guidance without substituting a generic QFN footprint. Place all decoupling capacitors close to their assigned pins, minimize loop area, and connect the exposed pad to the ground reference through multiple short vias. Check soldermask, paste, assembly, and thermal-coupling requirements against the package drawing, especially where the 6 mm by 6 mm device dissipates power during PLL and output operation.
Do not assume that every AD9577 order code has identical packaging. AD9577BCPZ, AD9577BCPZ-R7, and AD9577BCPZ-RL appear in different handling or packing arrangements, while AD9576BCPZ is a related but functionally different clock generator. Before substituting any listed part, verify pin functions, output formats, electrical limits, register behavior, reference requirements, and exposed-pad connections against the relevant manufacturer datasheet.
Configure output termination and drive settings for the actual transmission path rather than copying a generic termination value. Clock edges reaching 637.5 MHz can be strongly affected by trace loss, impedance mismatch, connector launches, and crosstalk. Use controlled-impedance routing, avoid right-angle turns where practical, keep clock and high-energy switching paths separated, and validate the assembled board with an appropriate clock or spectrum measurement setup.
Información de cumplimiento
Exact environmental declarations for AD9577BCPZ were not identified. The device is an industrial clock and timing IC rather than an AEC-Q100-qualified automotive product.