Analog Devices

AD9577BCPZ - Dual-PLL 637.5MHz Clock Generator | Analog Devices

Артикул: AD9577BCPZ ✓ Активен
40-lead LFCSP-WQ, 6 mm x 6 mm Package 19.44 MHz to 27 MHz Speed
MOQ: 1 |

AD9577BCPZ Обзор

The Analog Devices AD9577BCPZ is a dual-PLL network clock generator with a 19.44 MHz to 27 MHz input range, clock generation up to 637.5 MHz, and one clock output, housed in a 40-lead LFCSP-WQ package measuring 6 mm by 6 mm. The device integrates PLL1 and PLL2, supports I2C-programmable output frequencies and formats, and is designed for network clocking applications.

A network clock generator is a specialized timing IC that converts one reference clock into synchronized clock signals for communication equipment. In the semiconductor hierarchy, the AD9577 belongs to the clock and timing IC family, where its phase-locked loops multiply and translate the input frequency while distributing the resulting clock through configurable output stages. This architecture reduces the number of separate oscillators and frequency dividers required in systems that need multiple related clock domains.

The AD9577's dual-PLL architecture supports multiple clock-generation paths within one device. Its output frequency reaches 637.5 MHz, while the accepted reference input extends from 19.44 MHz to 27 MHz. I2C programming allows a host controller to configure operating parameters rather than relying entirely on fixed hardware settings. The 40-lead LFCSP-WQ package also includes an exposed thermal pad for improved heat transfer from the device to the PCB.

The AD9577 is intended for networking infrastructure where a stable, programmable clock is required at the system level. Appropriate implementations include Ethernet line cards, PCI Express equipment, SONET/SDH transport systems, clock-distribution networks, and test equipment requiring a low-jitter synthesized reference. Its multioutput clock-generator function is combined with two internal PLL cores so that the system can derive related outputs from a common reference while controlling frequency and format through the serial interface.

Because the AD9577 is a high-speed mixed-signal timing device, PCB layout is as important as electrical configuration. Keep crystal, reference-clock, decoupling, and clock-output paths short, preserve controlled differential impedance, and avoid routing outputs beneath noisy power-converter stages. The exposed pad should be connected to the appropriate ground plane with multiple low-impedance vias according to the land pattern and assembly requirements in the manufacturer datasheet.

The main design trade-off is integration versus configurability. A dual-PLL clock generator simplifies board partitioning and provides serial control, but it also requires careful reference-clock stability, power sequencing, output-format configuration, and layout validation. Confirm the required output standard, reference frequency, jitter target, voltage rails, and enable sequence before releasing the PCB.

This product page combines the AD9577 architecture, operating-frequency details, package information, replacement analysis, comparison data, and practical PCB guidance. It is intended to help engineers determine whether the AD9577BCPZ fits a network-clock architecture and to identify the closest documented alternatives without overlooking programming, package, or timing constraints.

Аналоги без доработки для AD9577BCPZ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Для этого товара нет аналогов без доработки.

Запросить аналоги

AD9577BCPZ Характеристики

Product Type Dual-PLL network clock generator
PLL Core Count 2 internal PLL cores
Reference Input Frequency 19.44 MHz to 27 MHz
Maximum Clock Output Frequency 637.5 MHz
Output Count 1 output
Control Interface I2C
Programmable Output Frequencies Supported by I2C programming
Programmable Output Formats Supported by I2C programming
Clock Architecture Multioutput clock generator with PLL1 and PLL2
Корпус 40-lead LFCSP-WQ, 6 mm x 6 mm
Exposed Thermal Pad Included in 40-lead LFCSP-WQ package
Тип монтажа Surface mount

Руководство по цоколевке AD9577BCPZ в корпусе 40-lead lfcsp-wq, 6 mm x 6 mm

Цоколевка для AD9577BCPZ (корпус 40-lead lfcsp-wq, 6 mm x 6 mm). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 40-lead lfcsp-wq, 6 mm x 6 mm для AD9577BCPZ

Нет подробных данных о распиновке для AD9577BCPZ.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

AD9577BCPZ подходит для 6 применениеs: Ethernet Network Clocking, PCI Express Reference Distribution, SONET and SDH Transport Equipment, Synchronous Test and Measurement Systems, Clock Distribution Backplanes, Telecom Line-Card Timing.

🌐

Ethernet Network Clocking

The AD9577BCPZ fits Ethernet equipment that requires a common, programmable timing reference across multiple clock domains. Its dual-PLL architecture accepts a 19.44 MHz to 27 MHz source and can generate clocks up to 637.5 MHz, while I2C programming allows output frequency and format to be configured by the system controller. Placing the device near the network-processing electronics can reduce trace length and timing variation, but the reference source must remain stable and the clock outputs must use controlled-impedance routing. The designer should also validate output jitter against the applicable Ethernet interface requirement.

🖥️

PCI Express Reference Distribution

The AD9577BCPZ can support PCI Express systems that need deterministic clock generation from a shared reference. Its two PLL cores provide independent frequency-generation paths, and the maximum output frequency of 637.5 MHz covers high-speed clocking requirements associated with modern data links. I2C control permits configuration by firmware or another bus master, reducing discrete programming logic. The implementation must match the required PCIe reference-clock format, provide clean supply rails, and preserve short return paths for every high-speed clock output.

🌐

SONET and SDH Transport Equipment

The AD9577BCPZ is suitable for transport systems requiring stable, configurable clocks for line-card timing. A reference input of 19.44 MHz to 27 MHz and an output capability up to 637.5 MHz give designers room to translate a board-level reference into the required network clock. The two internal PLLs allow related outputs to be managed from one device, while I2C programming supports controlled configuration during system initialization. For production designs, verify jitter, output levels, clock-format settings, and reference quality against the optical or electrical transport standard being implemented.

🔧

Synchronous Test and Measurement Systems

The AD9577BCPZ can serve as a programmable clock source in test equipment where several measurements must share a stable timing relationship. Its I2C-programmable frequencies and formats make it possible to configure a clock for different instrument modes without changing the board layout. The dual-PLL structure can support related conversion or interface clocks derived from a 19.44 MHz to 27 MHz reference. In an instrument chassis, isolate the reference from noisy digital activity, use low-noise supplies, and validate deterministic jitter and edge quality at the connector and measurement front end.

🏭

Clock Distribution Backplanes

The AD9577BCPZ can provide the synthesized source for a backplane that distributes related clocks to communication modules. Its maximum 637.5 MHz output supports demanding logic domains, while the programmable interface simplifies board-level configuration and manufacturing test. The device should be positioned near the clock fanout network to limit loss, jitter accumulation, and susceptibility to crosstalk. Differential clock routing, continuous reference planes, symmetric termination, and isolated supply filtering are essential when the backplane contains switching converters or high-speed data traffic.

📡

Telecom Line-Card Timing

The AD9577BCPZ fits telecom line cards that require centralized synthesis and serialization of network clocks. Two PLL cores permit multiple timing paths from one reference domain, and the 19.44 MHz to 27 MHz input range covers common line-card reference sources. I2C control allows the host processor to select frequencies and output formats during initialization or operational reconfiguration. The board implementation should include local decoupling, a clean crystal or oscillator reference, short reference traces, and clock outputs routed away from noisy transceiver sections to preserve edge quality.

Сводка рекомендуемых товаров

AD9577BCPZ Analog Devices Используется в: Ethernet Network Clocking, PCI Express Reference Distribution, SONET and SDH Transport Equipment, Synchronous Test and Measurement Systems, Clock Distribution Backplanes, Telecom Line-Card Timing AD9576BCPZ Related dual-PLL clock generator Используется в: Ethernet Network Clocking, PCI Express Reference Distribution, Synchronous Test and Measurement Systems, Clock Distribution Backplanes AD9577BCPZ-RL AD9577 family ordering option Используется в: SONET and SDH Transport Equipment AD9577BCPZ-R7 AD9577 family ordering option Используется в: Telecom Line-Card Timing
What is the AD9577BCPZ used for?
The AD9577BCPZ is a dual-PLL network clock generator used to produce synchronized clock signals in Ethernet, PCI Express, SONET/SDH, and related communication equipment. Analog Devices describes a multioutput clock-generator function, two on-chip PLL cores, and I2C-programmable output frequencies and formats. Its supported reference input is 19.44 MHz to 27 MHz, while the generated clock can reach 637.5 MHz.
What is the output frequency range of AD9577BCPZ?
The AD9577BCPZ supports a maximum clock output frequency of 637.5 MHz. Its reference input accepts 19.44 MHz to 27 MHz, and the internal PLL architecture translates that reference into the requested output clock. According to the Analog Devices AD9577 product page, output frequency and format are programmable through the I2C interface, allowing a controller to adapt the generated clock to the system timing requirement.
Where can I download the AD9577BCPZ datasheet PDF?
The official AD9577 product page at Analog Devices provides the manufacturer datasheet and product information for the AD9577 family. For pin assignments, power sequencing, electrical characteristics, output formats, and programming registers, use the pin-description and register tables in the manufacturer datasheet. The AD9577BCPZ uses a 40-lead LFCSP-WQ package, so its land pattern and exposed-pad connection should also be checked against the package drawing.
Where is the AD9577BCPZ pinout located?
The AD9577BCPZ pinout is located in the pin-description table and package drawing of the Analog Devices AD9577 datasheet. The device is supplied in a 40-lead LFCSP-WQ package with an exposed pad. Use that table to identify every supply, ground, reference-clock, I2C, and clock-output connection before laying out the PCB; exposed-pad vias and thermal-plane geometry should follow the manufacturer land pattern.
What are the key specifications of AD9577BCPZ?
The AD9577BCPZ is a dual-PLL network clock generator with a 19.44 MHz to 27 MHz reference input, a maximum output frequency of 637.5 MHz, and one clock output in a 40-lead 6 mm by 6 mm LFCSP-WQ package. Its I2C interface supports programmable output frequencies and formats. The two PLL cores provide separate frequency-generation paths within a common network-clock device.
Is AD9577BCPZ suitable for Ethernet and PCI Express systems?
Yes, AD9577BCPZ is suitable for Ethernet and PCI Express clocking systems because it integrates a multioutput clock generator with two PLL cores optimized for network clocking. The device accepts a 19.44 MHz to 27 MHz reference and produces clocks up to 637.5 MHz with I2C-programmable frequencies and formats. Final suitability still depends on the required output standard, jitter target, supply rails, and system reference clock.
AD9577BCPZ vs AD9576BCPZ: which is better for network clocking?
AD9577BCPZ is the better choice when the design needs its two-PLL network-clock architecture, programmable output frequencies and formats, and operation up to 637.5 MHz. AD9576BCPZ is described as a multiple-output generator with two dedicated PLL cores and flexible frequency translation. The final selection should compare the required output formats, jitter performance, register compatibility, reference frequency, and PCB schematic rather than package appearance alone.
When should I choose AD9577BCPZ over AD9576BCPZ?
Choose AD9577BCPZ when the system specifically targets its multioutput network-clock generator, programmable frequency and format control, and 637.5 MHz maximum output capability. Consider AD9576BCPZ when its frequency-translation architecture better matches the source and destination clocks. Because both appear in 40-lead LFCSP packages, engineers should verify pin-level functionality and programming compatibility rather than assuming that the shared package guarantees interchangeability.
Can AD9576BCPZ replace AD9577BCPZ on the same PCB?
AD9576BCPZ should not be treated as an automatic drop-in replacement for AD9577BCPZ. Both devices use a 40-lead LFCSP package and share a dual-PLL framework, but package equality alone does not establish pin-to-pin compatibility. Compare every pin function, supply requirement, PLL configuration, output format, register map, reference-clock setup, and reset behavior in the two Analog Devices datasheets before approving a substitution.
What can replace AD9577BCPZ?
The closest documented alternatives are AD9577BCPZ-R7, AD9577BCPZ-RL, and AD9576BCPZ, but each requires qualification before substitution. The AD9577BCPZ-R7 and AD9577BCPZ-RL listings identify the same AD9577 family in the 40-lead LFCSP-WQ package with different packing or handling options. AD9576BCPZ shares the package and dual-PLL architecture but has different functional details. Verify pinout, programming, electrical limits, and lifecycle requirements.
Is AD9577BCPZ in stock and what is its lead time?
Current stock, minimum order quantity, and production lead time should be confirmed through the Request a Quote form on this page. The AD9577 family remains represented by an active Analog Devices product page, but that does not establish the quantity available for the exact AD9577BCPZ order code. Include your required quantity, date code, packaging preference, and target schedule with the request so the current allocation can be reviewed.
Where can I buy AD9577BCPZ and check its price?
Use the Request a Quote form on this page to request current AD9577BCPZ pricing, availability, and lead time for the exact non-reel order code. Distributor listings also identify AD9577BCPZ as a 40-lead LFCSP-WQ network clock generator, but availability can vary by order code and quantity. Specify the required quantity, acceptable date code, and packaging requirements when requesting a quotation.
What is the price of AD9577BCPZ?
The current unit price for AD9577BCPZ should be requested through the Request a Quote form on this page. Because exact-MPN stock, market conditions, order quantity, and date-code requirements can change, the displayed quotation workflow is more appropriate than a static price reference. Provide your forecast quantities and packaging requirements to obtain a current commercial response for the 40-lead LFCSP-WQ device.
How should the AD9577BCPZ PCB layout be designed?
Place input and output decoupling capacitors close to their associated pins, keep the reference-clock path short, and maintain controlled impedance on every clock output. Connect the exposed thermal pad to the ground plane with multiple low-impedance vias using the manufacturer land pattern. Avoid routing high-speed clock nets beneath switching supplies or digital return paths, and verify the final board with the Analog Devices recommended layout and signal-integrity checks.
Does AD9577BCPZ comply with RoHS and REACH?
The exact RoHS and REACH status for AD9577BCPZ should be confirmed from the current Analog Devices product documentation or a declaration associated with the purchased lot. The AD9577 family supports environmentally constrained electronics manufacturing, but compliance status and applicable declarations should not be inferred solely from device function or package type. Use the Request a Quote form when current material or environmental documentation is required for procurement.

Справочные инженерные данные для AD9577BCPZ — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose AD9577BCPZ when a network-oriented design needs a common clock-generator function, two PLL cores, a 19.44 MHz to 27 MHz reference input, and output capability up to 637.5 MHz. Its I2C-programmable frequencies and formats make it especially useful when the system controller must configure timing during initialization or manufacturing test. AD9576BCPZ may be preferable when flexible frequency translation is the dominant requirement, but it should not replace the AD9577 without a complete pin, register, electrical, and output-format review. AD9577BCPZ-R7 and AD9577BCPZ-RL represent documented family ordering options that may suit different packing requirements, yet the exact mechanical, marking, and procurement conditions must match the assembly process. For all options, verify jitter, supply rails, reference quality, exposed-pad implementation, and production lifecycle requirements.

Сравнение с аналогами

Параметр Этот товар
Brand Analog Devices
Package 40-lead LFCSP-WQ, 6 mm x 6 mm
Reference Input Frequency 19.44 MHz to 27 MHz
Maximum Output Frequency 637.5 MHz
Output Count 1 output
PLL Core Count 2 PLL cores
Control Interface I2C
Output Configuration I2C-programmable frequencies and formats
Primary Application Network clocking
Exposed Thermal Pad Included

Ключевые отличия

  • Dual-PLL network-clock integration (против AD9576BCPZ)
  • Programmable clock configuration (против AD9576BCPZ)
  • Compact 40-lead surface-mount implementation (против Discrete oscillator and PLL approach)

Заметки по проектированию

Treat the reference clock as a high-speed signal rather than a low-frequency utility clock. Place the oscillator or clock source close to the relevant input, keep the route short, provide a continuous return plane, and avoid crossings above split power or ground planes. The AD9577 can generate clocks up to 637.5 MHz, so impedance discontinuities and long stubs can degrade edge quality and phase noise even when the nominal frequency setting is correct.

Use the manufacturer LFCSP-WQ land pattern and exposed-pad guidance without substituting a generic QFN footprint. Place all decoupling capacitors close to their assigned pins, minimize loop area, and connect the exposed pad to the ground reference through multiple short vias. Check soldermask, paste, assembly, and thermal-coupling requirements against the package drawing, especially where the 6 mm by 6 mm device dissipates power during PLL and output operation.

Do not assume that every AD9577 order code has identical packaging. AD9577BCPZ, AD9577BCPZ-R7, and AD9577BCPZ-RL appear in different handling or packing arrangements, while AD9576BCPZ is a related but functionally different clock generator. Before substituting any listed part, verify pin functions, output formats, electrical limits, register behavior, reference requirements, and exposed-pad connections against the relevant manufacturer datasheet.

Configure output termination and drive settings for the actual transmission path rather than copying a generic termination value. Clock edges reaching 637.5 MHz can be strongly affected by trace loss, impedance mismatch, connector launches, and crosstalk. Use controlled-impedance routing, avoid right-angle turns where practical, keep clock and high-energy switching paths separated, and validate the assembled board with an appropriate clock or spectrum measurement setup.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

Exact environmental declarations for AD9577BCPZ were not identified. The device is an industrial clock and timing IC rather than an AEC-Q100-qualified automotive product.

Данные проверены: 2026-11-19 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

AD9577BCPZ datasheet AD9577BCPZ pinout AD9577BCPZ datasheet pdf AD9577BCPZ 637.5MHz clock generator AD9577BCPZ dual PLL AD9577BCPZ LFCSP-40 footprint AD9577BCPZ equivalent AD9577BCPZ replacement AD9577BCPZ vs AD9576BCPZ AD9577BCPZ Ethernet clock AD9577BCPZ PCI Express clock AD9577BCPZ price AD9577BCPZ stock Analog Devices AD9577BCPZ AD9577BCPZ I2C programming

Связанные компоненты & термины

Analog Devices AD9577BCPZ AD9577 AD9577BCPZ-R7 AD9577BCPZ-RL AD9576BCPZ network clock generator clock and timing IC phase-locked loop PLL dual-PLL architecture frequency synthesizer I2C LFCSP-WQ LFCSP surface mount SMD Ethernet PCI Express SONET/SDH 19.44 MHz reference clock 637.5 MHz clock output exposed thermal pad programmable output format low-jitter clocking
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ