ADA4897-2ARMZ - Dual Low Noise RRO Op Amp | Analog Devices
N.º de pieza: ADA4897-2ARMZ ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $5.3 | $5,30 |
| 10 | $4.77 | $47,70 |
| 100 | $4.24 | $424,00 |
| 500 | $3.71 | $1.855,00 |
| 1.000 | $3.18 | $3.180,00 |
ADA4897-2ARMZ Descripción general
An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output. It is a fundamental building block in analog signal processing, used in applications ranging from signal conditioning to active filtering. The ADA4897-2 belongs to the class of high-speed, low-noise amplifiers, which are essential in precision instrumentation and communication systems where signal integrity is critical.
Key features of the ADA4897-2 include a low input voltage noise of 1 nV/√Hz, a 1/f noise corner of 2.4 nV/√Hz at 10 Hz, and a spurious-free dynamic range (SFDR) of 80 dBc at 2 MHz. The amplifier also provides a bandwidth of 230 MHz and a slew rate of 120 V/µs, enabling fast signal processing. The rail-to-rail output stage maximizes dynamic range, making it ideal for single-supply applications.
The ADA4897-2 uses a voltage feedback architecture with complementary bipolar transistors, achieving low distortion and high linearity. The device is fully specified over the industrial temperature range of -40°C to +125°C. Its low power consumption and high speed make it a versatile choice for battery-powered and high-density systems.
Typical applications include ultrasound equipment, low noise PLL filters, high performance ADC drivers, and high speed signal conditioning. The amplifier's low noise and high bandwidth ensure accurate signal reproduction in these demanding environments.
When designing with the ADA4897-2, proper power supply decoupling is essential to maintain stability and minimize noise. Use 0.1 µF ceramic capacitors close to the supply pins and a 10 µF tantalum capacitor for bulk decoupling. The output can drive capacitive loads up to 100 pF without oscillation, but for larger loads, an isolation resistor may be required.
Alternativas directas para ADA4897-2ARMZ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con ADA4897-2ARMZ (mismo factor de forma y huella) — difiere en Slew Rate, Package, Supply Voltage Range, Gain Bandwidth Product, Amplifier Type.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
ADA4896-2ARMZ
✅ Sustitución directa✓ En stock
$2.25 / unidad
Ver hoja de datos →ADA4807-2ARMZ
✅ Sustitución directa✓ En stock
$1.82 / unidad
Ver hoja de datos →ADA4806-2ARMZ
✅ Sustitución directa✓ En stock
$1.85 / unidad
Ver hoja de datos →ADA4805-2ARMZ
✅ Sustitución directa✓ En stock
$2.4 / unidad
Ver hoja de datos →ADA4666-2ARMZ-RL7
✅ Sustitución directa✓ En stock
$1.85 / unidad
Ver hoja de datos →ADA4897-2ARMZ Valores máximos y características eléctricas
| Number of Channels | 2 |
| Supply Voltage Range | 3 V to 10 V |
| Quiescent Current per Amplifier | 3 mA |
| Input Voltage Noise Density | 1 nV/√Hz |
| 1/f Noise Corner | 2.4 nV/√Hz at 10 Hz |
| Bandwidth | 230 MHz |
| Slew Rate | 120 V/µs |
| Spurious-Free Dynamic Range | 80 dBc at 2 MHz |
| Tipo de salida | Rail-to-Rail |
| Input Type | Voltage Feedback |
| Encapsulado | 10-MSOP |
| Rango de temperatura de funcionamiento | -40°C to +125°C |
| Estado RoHS | Compliant |
| Tipo de montaje | Surface Mount |
| Settling Time | 45 ns to 0.1% |
Configuración de pines de ADA4897-2ARMZ
| Pin 1 | OUT A — Output of amplifier A |
| Pin 2 | -IN A — Inverting input of amplifier A |
| Pin 3 | +IN A — Non-inverting input of amplifier A |
| Pin 4 | V- — Negative supply voltage |
| Pin 5 | +IN B — Non-inverting input of amplifier B |
| Pin 6 | -IN B — Inverting input of amplifier B |
| Pin 7 | OUT B — Output of amplifier B |
| Pin 8 | V+ — Positive supply voltage |
| Pin 9 | NC — No connect |
| Pin 10 | NC — No connect |
Aplicaciones típicas
ADA4897-2ARMZ es adecuado para 6 aplicacións: Ultrasound Equipment, Low Noise PLL Filters, High Performance ADC Drivers, High Speed Signal Conditioning, Portable Medical Devices, Communication Systems.
Ultrasound Equipment
The ADA4897-2ARMZ is ideal for ultrasound systems due to its low noise (1 nV/√Hz) and high bandwidth (230 MHz), which are essential for processing high-frequency echo signals with minimal distortion. The dual channel configuration allows for compact front-end designs, and the rail-to-rail output maximizes dynamic range for improved image quality. Its low power consumption (3 mA per channel) is beneficial for portable ultrasound devices.
Recomendado
Low Noise PLL Filters
In phase-locked loop (PLL) circuits, the ADA4897-2ARMZ provides low noise amplification for loop filter components, ensuring stable and clean frequency synthesis. Its low voltage noise (1 nV/√Hz) minimizes phase noise contribution, while the high bandwidth (230 MHz) supports fast loop dynamics. The rail-to-rail output allows full control voltage swing, and the small MSOP package saves board space in RF modules.
Recomendado
High Performance ADC Drivers
The ADA4897-2ARMZ is well-suited for driving high-speed ADCs, providing low noise and high bandwidth to preserve signal fidelity. Its low distortion (SFDR 80 dBc at 2 MHz) ensures accurate conversion, and the rail-to-rail output maximizes the ADC input range. The dual channel configuration is ideal for differential driving, and the fast settling time (45 ns) supports high sampling rates.
Recomendado
High Speed Signal Conditioning
The ADA4897-2ARMZ excels in high speed signal conditioning applications such as video amplification and communication systems. Its 230 MHz bandwidth and 120 V/µs slew rate enable accurate reproduction of fast signals, while the low noise (1 nV/√Hz) preserves signal quality. The rail-to-rail output is beneficial for single-supply systems, and the low power consumption (3 mA) is advantageous for multi-channel designs.
Recomendado
Portable Medical Devices
The ADA4897-2ARMZ is suitable for portable medical devices due to its low power consumption (3 mA per channel) and small MSOP package. Its low noise (1 nV/√Hz) is critical for accurate biopotential measurements, and the wide supply range (3 V to 10 V) accommodates battery voltages. The rail-to-rail output ensures maximum signal swing, and the high bandwidth supports fast signal acquisition.
Recomendado
Communication Systems
In communication systems, the ADA4897-2ARMZ provides low noise amplification for IF and baseband signals. Its high SFDR (80 dBc at 2 MHz) ensures low distortion in multi-carrier environments, and the high bandwidth (230 MHz) supports wideband signals. The dual channel configuration is useful for I/Q processing, and the low power consumption is beneficial for high-density line cards.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para ADA4897-2ARMZ — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | ADA4896-2ARMZ | ADA4807-2ARMZ | ADA4806-2ARMZ | ADA4805-2ARMZ |
|---|---|---|---|---|---|
| Package | 10-MSOP | 10-MSOP | 10-MSOP | 10-MSOP | 10-MSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Supply Voltage Range | 3 V to 10 V | 3 V to 10 V | 2.7 V to 5 V | 2.7 V to 5 V | 2.7 V to 5 V |
| Quiescent Current per Amplifier | 3 mA | 2.5 mA | 1 mA | 0.8 mA | 0.8 mA |
| Input Voltage Noise Density | 1 nV/√Hz | 1.2 nV/√Hz | 3.1 nV/√Hz | 4.5 nV/√Hz | 4.5 nV/√Hz |
| Bandwidth | 230 MHz | 230 MHz | 180 MHz | 100 MHz | 105 MHz |
| Slew Rate | 120 V/µs | 120 V/µs | 225 V/µs | 150 V/µs | 150 V/µs |
Diferenciadores clave
- Lowest input voltage noise in its class (frente a ADA4807-2ARMZ)
- Higher bandwidth (frente a ADA4806-2ARMZ)
- Higher slew rate (frente a ADA4805-2ARMZ)
Notas de diseño
The ADA4897-2ARMZ operates from a 3 V to 10 V supply. Ensure the supply voltage is within this range and adequately decoupled. Use a 0.1 µF ceramic capacitor close to each supply pin and a 10 µF tantalum capacitor for bulk decoupling. This minimizes power supply noise and ensures stable operation.
For optimal performance, place the ADA4897-2ARMZ on a PCB with a solid ground plane. Keep the feedback network components close to the amplifier to minimize parasitic inductance. Use short, direct traces for the input and output connections to reduce noise pickup. The MSOP package has a thermal pad that should be soldered to the ground plane for improved thermal dissipation.
Avoid driving capacitive loads greater than 100 pF directly, as this can cause instability. If a larger capacitive load is required, add an isolation resistor in series with the output. Also, ensure the input common-mode voltage is within the specified range to prevent output phase reversal. Refer to the datasheet for detailed application circuits.
Información de cumplimiento
RoHS compliant per distributor data. Other compliance information not specified in the provided data.
