ADCLK905 - Ultrafast SiGe ECL Clock/Data Buffer | Analog Devices
N.º de pieza: ADCLK905 ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $24.5455 | $24,55 |
| 10 | $17.7273 | $177,27 |
| 100 | $15.6818 | $1.568,18 |
| 500 | $15 | $7.500,00 |
| 1.000 | $14.3182 | $14.318,20 |
ADCLK905 Descripción general
A clock/data buffer is a high-speed integrated circuit that receives a clock or data signal and re-drives it to one or more outputs with minimal added jitter and propagation delay. It is a critical component in signal distribution networks, ensuring signal integrity across multiple loads. The ADCLK905 belongs to the category of clock buffers, which are part of the broader clock and timing IC family. These devices are essential in systems where precise timing and low jitter are paramount, such as in high-speed ADCs, DACs, and serial data links.
Key features of the ADCLK905 include its 7.5 GHz toggle rate, which enables distribution of very high-frequency clocks, and its 60 fs random jitter, which preserves signal integrity in demanding applications. The 95 ps propagation delay ensures minimal latency, and the on-chip terminations simplify PCB layout by reducing external component count. The ECL output drivers provide full-swing signals compatible with ECL logic levels, and the extended industrial temperature range (-40°C to +125°C) supports harsh environments.
Technically, the ADCLK905 leverages the XFCB3 SiGe bipolar process, which offers high-speed performance with low power consumption. The device includes a differential input and output, allowing for flexible signal routing. The on-chip terminations at both input pins reduce reflections and improve signal quality. The LFCSP package with exposed pad provides excellent thermal performance, enabling reliable operation at high frequencies.
Typical applications include clock distribution for high-speed ADCs and DACs, data buffering in serial communication links, and signal conditioning in test and measurement equipment. The ADCLK905 is also suitable for use in RF and microwave systems where low jitter and high toggle rates are critical.
When designing with the ADCLK905, it is important to use high-quality PCB materials and proper termination techniques to maintain signal integrity at multi-gigahertz frequencies. The evaluation board uses high-quality dielectric material between layers to ensure optimal performance.
Alternativas directas para ADCLK905 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
ADCLK907
📋 Alternativa de referencia (no en el catálogo)
ADCLK925
📋 Alternativa de referencia (no en el catálogo)
ADCLK905BCPZ-WP
📋 Alternativa de referencia (no en el catálogo)
ADCLK905BCPZ-R7
📋 Alternativa de referencia (no en el catálogo)
NB6L14MNG
📋 Alternativa de referencia (no en el catálogo)
MC100EP16DTG
📋 Alternativa de referencia (no en el catálogo)
ADCLK905 Valores máximos y características eléctricas
| Función | Clock/Data Buffer |
| Number of Inputs | 1 |
| Número de salidas | 1 |
| Toggle Rate | 7.5 GHz |
| Propagation Delay | 95 ps |
| Output Rise/Fall Time | 60 ps typical |
| Random Jitter | 60 fs |
| Logic Family | ECL |
| Input Termination | On-chip at both input pins |
| Rango de temperatura de funcionamiento | -40°C to +125°C |
| Encapsulado | 16-lead LFCSP (VQFN) with exposed pad |
| Tipo de montaje | Surface Mount |
| Process Technology | XFCB3 SiGe bipolar |
| Estado RoHS | Compliant |
Configuración de pines de ADCLK905
| Pin 1 | CLK — Clock input (differential positive) |
| Pin 2 | CLKB — Clock input (differential negative) |
| Pin 3 | VCC — Positive supply |
| Pin 4 | VCC — Positive supply |
| Pin 5 | Q — Output (differential positive) |
| Pin 6 | QB — Output (differential negative) |
| Pin 7 | VCC — Positive supply |
| Pin 8 | VCC — Positive supply |
| Pin 9 | GND — Ground |
| Pin 10 | GND — Ground |
| Pin 11 | GND — Ground |
| Pin 12 | GND — Ground |
| Pin 13 | GND — Ground |
| Pin 14 | GND — Ground |
| Pin 15 | GND — Ground |
| Pin 16 | GND — Ground |
Aplicaciones típicas
ADCLK905 es adecuado para 6 aplicacións: High-Speed ADC Clock Distribution, Data Buffering in Serial Links, RF and Microwave Signal Conditioning, Test and Measurement Equipment, Data Acquisition Systems, Communications Infrastructure.
High-Speed ADC Clock Distribution
The ADCLK905's 7.5 GHz toggle rate and 60 fs random jitter make it ideal for distributing low-jitter clocks to high-speed ADCs. Its 95 ps propagation delay ensures minimal latency, and the ECL outputs provide full-swing signals compatible with ADC clock inputs. The on-chip terminations simplify layout, reducing reflections and maintaining signal integrity at multi-gigahertz frequencies. This ensures optimal ADC dynamic performance, such as high SNR and SFDR, in applications like radar, communications, and test equipment.
Recomendado
Data Buffering in Serial Links
In high-speed serial communication links, the ADCLK905 buffers data signals with minimal added jitter, preserving signal integrity over long traces. Its 60 fs random jitter and 95 ps propagation delay ensure that data eye diagrams remain open, reducing bit error rates. The differential ECL outputs drive transmission lines effectively, and the on-chip terminations reduce external component count. This makes the ADCLK905 suitable for backplane distribution, optical module interfaces, and high-speed instrumentation.
Recomendado
RF and Microwave Signal Conditioning
The ADCLK905's ultra-low jitter and high toggle rate make it suitable for RF and microwave systems where clock quality directly impacts phase noise and system performance. It can distribute reference clocks to PLLs, mixers, and direct digital synthesizers with minimal degradation. The SiGe process provides high-speed operation with low power consumption, and the LFCSP package offers good thermal performance. This enables reliable operation in radar, satellite communication, and wireless infrastructure.
Recomendado
Test and Measurement Equipment
In oscilloscopes, spectrum analyzers, and signal generators, the ADCLK905 provides precise clock distribution to multiple measurement channels. Its 7.5 GHz toggle rate supports high-bandwidth sampling, while the 60 fs jitter ensures accurate timebase references. The extended temperature range (-40°C to +125°C) allows use in benchtop and field instruments. The on-chip terminations simplify PCB design, and the ECL outputs interface directly with high-speed comparators and ADCs.
Recomendado
Data Acquisition Systems
The ADCLK905 is used in data acquisition systems to distribute sampling clocks to multiple ADCs, ensuring synchronized and low-jitter sampling. Its 95 ps propagation delay minimizes skew between channels, and the 60 fs jitter preserves signal fidelity. The device's small LFCSP package and on-chip terminations reduce board space and component count, making it ideal for compact multi-channel systems. It supports high-speed data conversion in industrial, medical, and scientific applications.
Recomendado
Communications Infrastructure
In base stations, routers, and optical transport systems, the ADCLK905 buffers clock and data signals with minimal jitter, ensuring reliable high-speed data transmission. Its 7.5 GHz toggle rate supports emerging standards like 5G and 400G Ethernet. The ECL outputs drive long backplane traces, and the on-chip terminations reduce reflections. The extended temperature range and high reliability make it suitable for outdoor and industrial communications equipment.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para ADCLK905 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | ADCLK907 | ADCLK925 | NB6L14MNG |
|---|---|---|---|---|
| Package | 16-lead LFCSP | 16-lead LFCSP | 16-lead LFCSP | 16-lead LFCSP |
| Brand | Analog Devices | Analog Devices | Analog Devices | onsemi |
| Toggle Rate | 7.5 GHz | 7.5 GHz | 7.5 GHz | 3 GHz |
| Propagation Delay | 95 ps | 95 ps | 95 ps | 400 ps |
| Random Jitter | 60 fs | 60 fs | 60 fs | 1 ps |
| Number of Outputs | 1 | 2 (dual buffer) | 2 (fan-out) | 4 |
| Logic Family | ECL | ECL | ECL | LVPECL |
| Operating Temperature Range | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +85°C |
Diferenciadores clave
- Ultra-low random jitter of 60 fs (frente a NB6L14MNG)
- Higher toggle rate of 7.5 GHz (frente a NB6L14MNG)
- Extended industrial temperature range (frente a MC100EP16DTG)
Notas de diseño
For optimal performance at multi-gigahertz frequencies, use high-quality PCB materials such as Rogers or low-loss FR4. Ensure controlled impedance traces (50 ohm single-ended, 100 ohm differential) for all high-speed inputs and outputs. Place the ADCLK905 close to the load to minimize trace length and reduce signal degradation.
Decouple the VCC pins with 0.1 uF and 10 uF capacitors placed as close to the pins as possible. Use a low-noise power supply to avoid introducing jitter into the clock signal. The ADCLK905 requires a clean, stable supply voltage to maintain its low jitter performance.
Use differential routing for the input and output pairs to minimize common-mode noise. Keep the traces balanced and avoid vias where possible. The on-chip terminations simplify layout, but ensure the ground plane is continuous under the device to provide a low-inductance return path.
Información de cumplimiento
RoHS compliant per Analog Devices product page. Other compliance details not specified in provided data.
