Analog Devices

ADM234LANZ - 100kbps Quad RS-232 Driver | Analog Devices

N.º de pieza: ADM234LANZ ✓ Activo
4.5 V to 5.5 V Vdss PDIP-16, MO-095AC Package
MOQ: 1 |

ADM234LANZ Descripción general

The Analog Devices ADM234LANZ is a four-channel CMOS RS-232 line driver operating from a single 4.5 V to 5.5 V supply, supporting data rates up to 100 kbps in a 16-pin PDIP package. Designed for EIA-232-E and V.28 communications interfaces, it eliminates the need for external ±12 V supplies in systems where only a +5 V rail is available. The device uses a charge-pump architecture to generate the bipolar voltage levels required by RS-232 transmitters.

An RS-232 line driver is a communications interface integrated circuit that converts logic-level signals from a host, controller, or data-acquisition system into bipolar voltage levels suitable for transmission over a serial link. It belongs to the interface IC hierarchy, specifically the line-driver and transceiver class used to bridge digital logic and legacy serial communication ports.

The ADM234LANZ provides four driver channels, a maximum supply voltage of 5.5 V, CMOS technology, and a 100 kbps maximum data rate. Its industrial temperature grade supports use in factory automation, industrial controls, instrumentation, and embedded equipment where RS-232 compatibility must coexist with a modern single-supply architecture. The through-hole PDIP package also favors repairable industrial assemblies and designs assembled with conventional DIP sockets.

Each driver channel provides the electrical voltage translation required for RS-232 signaling, while the integrated charge-pump circuitry generates the positive and negative transmitter levels from the +5 V supply. This architecture reduces the external component count compared with a discrete RS-232 implementation and avoids separate power rails for the interface. Designers should still treat the driver outputs as differential-voltage, bipolar signaling nodes rather than ordinary CMOS logic outputs.

Typical applications include RS-232 links in industrial controllers, laboratory instruments, barcode and test equipment, legacy data-collection systems, and service interfaces for embedded machinery. The device is particularly suitable when a modern controller has a 5 V UART but the peripheral connection still requires EIA-232-E levels. Its four channels support several independent transmit paths where the system needs more than one serial endpoint.

For reliable implementation, place the driver close to the connector or protected board edge, route each RS-232 output as a differential pair, and provide the supply and ground connections required by the Analog Devices datasheet. Add appropriate surge and ESD protection when the cable leaves the enclosure, and account for the non-inverting logic thresholds and slew behavior when designing system-level timing.

This page consolidates the exact ADM234LANZ electrical ratings, verified package information, sourcing guidance, cross-reference findings, and practical implementation considerations. It also distinguishes ordering and package variants from true pin-compatible replacements so engineers can make a controlled substitution without assuming that every similar RS-232 part is electrically identical.

Alternativas directas para ADM234LANZ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con ADM234LANZ (mismo factor de forma y huella) — difiere en Package, Product Type, Maximum Data Rate, DC-DC Converter, Supply Voltage.

Analog Devices
Package: 16-pin PDIP
Product Type: RS-232 line driver and receiver IC
Maximum Data Rate: 120 kB/s
Comparar con ADM234LANZ →
Analog Devices
Package: 20-lead SSOP
Product Type: 5 V-powered CMOS RS-232 drivers/receivers
Maximum Data Rate: 120 kB/s
Comparar con ADM234LANZ →
Analog Devices
Package: 16-pin PDIP
Comparar con ADM234LANZ →

ADM234LARZ

✅ Sustitución directa
📦 PDIP-16
Same ADM234L 4-driver family and 4.5 V to 5.5 V supply class; key data-rate rating differs by 0% from the 100 kbps target

📋 Alternativa de referencia (no en el catálogo)

ADM234LJNZ

✅ Sustitución directa
Analog Devices
📦 DIP-16
RS-232 line driver · 4 · 4.5 V to 5.5 V · 100 kBPS · +5 V CMOS · 16-pin PDIP · Through-hole · 16

Consulte el precio

Ver hoja de datos →

ADM234LAQ

✅ Sustitución directa
Analog Devices
📦 PDIP-16
RS-232 driver/receiver interface IC · 5 V · 4.5 V to 5.5 V · 120 kB/s · 4 · 4 · Yes · 9 V

Consulte el precio

Ver hoja de datos →

ADM234LAR

✅ Sustitución directa
Analog Devices
📦 PDIP-16
5 V-powered CMOS RS-232 drivers/receivers · 5 V · 4 · 4 · 120 kB/s · EIA-232-E and V.28 specifications · 9 V from a 5 V supply · 1 µF

Consulte el precio

Ver hoja de datos →

MAX234EPE+

✅ Sustitución directa
📦 PDIP-16
Same 16-pin DIP RS-232 footprint and 5 V interface class; documented data rate is 120 kbps versus 100 kbps, a 20% increase

📋 Alternativa de referencia (no en el catálogo)

ADM234LANZ Especificaciones

Product Type Quad RS-232 line driver
Driver Channel Count 4 channels
Receiver Channel Count 0 channels
Supply Voltage Range 4.5 V to 5.5 V
Maximum Supply Voltage 5.5 V
Maximum Data Rate 100 kbps
Technology CMOS
Interface Standard EIA-232-E and V.28
Encapsulado PDIP-16, MO-095AC
Terminal Count 16 terminals
Tipo de montaje Through-hole
Package Shape Rectangular
Temperature Grade Industrial
Velocidad de datos 100 kbps

Configuración de pines de ADM234LANZ

DIP-16 Package Pinout Diagram DIP-16 16-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 DIP-16
Pin 1 R1OUT — Receiver 1 output
Pin 2 R2OUT — Receiver 2 output
Pin 3 R3OUT — Receiver 3 output
Pin 4 R4OUT — Receiver 4 output
Pin 5 T1IN — Driver 1 input
Pin 6 T2IN — Driver 2 input
Pin 7 T3IN — Driver 3 input
Pin 8 T4IN — Driver 4 input
Pin 9 GND — Ground
Pin 10 T4OUT — Driver 4 output
Pin 11 T3OUT — Driver 3 output
Pin 12 T2OUT — Driver 2 output
Pin 13 T1OUT — Driver 1 output
Pin 14 V+ — Positive supply
Pin 15 ON — Power shutdown control
Pin 16 GND — Ground

Aplicaciones típicas

ADM234LANZ es adecuado para 6 aplicacións: Industrial Controller RS-232 Port, Laboratory Test Instrument Interface, Data Acquisition System, Legacy Equipment Retrofit, Barcode and Identification Equipment, Embedded Service and Configuration Port.

🏭

Industrial Controller RS-232 Port

The ADM234LANZ fits industrial controllers that retain an EIA-232-E or V.28 service port while their logic circuitry operates from +5 V. Its four driver channels can serve independent serial outputs, while the 4.5 V to 5.5 V supply range eliminates the need for separate ±12 V rails. The 100 kbps rate is adequate for configuration consoles, legacy peripherals, and short-distance supervisory links. Keep each transmitter route paired with the interface ground and place external protection near connectors exposed to industrial cable transients.

🔧

Laboratory Test Instrument Interface

Test instruments commonly expose RS-232 for legacy analyzers, fixtures, and service computers, and the ADM234LANZ supplies four single-ended-to-bipolar driver channels without external ±12 V power. A 100 kbps ceiling is appropriate for command traffic, status reporting, and low-speed measurement data rather than continuous high-bandwidth transfers. The PDIP-16 package supports prototype boards and repairable laboratory equipment. Place protection at the D-sub connector and keep analog measurement grounds separate from RS-232 return-current paths to prevent cable transients from corrupting readings.

📟

Data Acquisition System

The ADM234LANZ can provide legacy acquisition systems with multiple outbound RS-232 paths from a +5 V controller. Its four drivers suit multi-channel instrument trigger, status, and configuration outputs, with the 100 kbps rate supporting command and control traffic. Because the part contains transmitters but no receivers, incoming measurement data requires a separate receiver or transceiver stage. Keep the interface ground referenced to the source ground and apply cable-side surge protection without adding excessive capacitance to the driver outputs.

🔌

Legacy Equipment Retrofit

Retrofits of legacy serial equipment often require a modern controller to drive older RS-232 peripherals while retaining a +5 V power architecture. The ADM234LANZ provides four bipolar transmitter outputs at rates up to 100 kbps, making it suitable for configuration commands and short control exchanges. The through-hole PDIP-16 package is useful where socketed boards and field repairability matter. Before installation, verify the legacy device uses true RS-232 levels rather than TTL, and include external protection for cables connected outside the enclosure.

📷

Barcode and Identification Equipment

Barcode readers, optical identification stations, and access-control peripherals may use RS-232 command links with rates below 100 kbps. The ADM234LANZ's four driver channels permit a single +5 V controller to address several outbound identification or status paths. Its CMOS implementation and 4.5 V to 5.5 V operating range align with modern embedded supply rails, while the PDIP package simplifies through-hole industrial assembly. Maintain short driver traces, use twisted-pair cabling, and place ESD protection at the external connector.

🖥️

Embedded Service and Configuration Port

Embedded machinery often retains an RS-232 configuration port for diagnostics, firmware loading, and factory setup even when the main controller uses modern serial interfaces. The ADM234LANZ generates the required EIA-232-E transmitter levels from one 4.5 V to 5.5 V supply, and its 100 kbps rate is suitable for setup consoles and short diagnostic exchanges. The industrial-grade labeling supports deployment in controlled equipment environments. Confirm the exact temperature limits, provide shutdown control if required by the design, and protect every externally accessible line.

What is the operating voltage of ADM234LANZ?
The ADM234LANZ operates from a 4.5 V to 5.5 V single supply, with 5.5 V listed as the maximum supply voltage. According to the Analog Devices datasheet, this +5 V supply lets the interface generate the bipolar RS-232 levels needed by the drivers without separate +12 V and -12 V rails. A design should maintain the supply within those limits throughout startup, normal operation, and fault conditions.
What is the maximum data rate of ADM234LANZ?
The ADM234LANZ supports RS-232 data rates up to 100 kbps. According to the Analog Devices datasheet, the device is a four-channel line driver rather than a full transceiver, so each channel transmits data but does not receive and regenerate the remote signal. System timing should account for driver enable or shutdown behavior where the selected configuration provides that control.
Where can I download the ADM234LANZ datasheet PDF?
The official ADM234LANZ datasheet is available through the Analog Devices ADM234L product page at analog.com. The manufacturer documentation describes the device as a 5 V-powered CMOS RS-232 driver intended for EIA-232-E and V.28 interfaces. Use the manufacturer PDF for the authoritative pin description, electrical characteristics, timing diagrams, and recommended application circuit.
Where can I find the ADM234LANZ pinout?
The ADM234LANZ uses a 16-pin PDIP package, and its pin descriptions are shown in the Analog Devices ADM234L datasheet. The interface includes four driver inputs and four bipolar transmitter outputs in addition to power, ground, and control connections. Use the pin-description table when assigning PCB tracks because package outline drawings alone do not identify the functional pins.
Is ADM234LANZ a transceiver or only a driver?
The ADM234LANZ is a four-channel RS-232 line driver with no receiver channels. It converts host-side logic signals into the bipolar voltage levels required for EIA-232-E and V.28 communication links. A system requiring both transmit and receive functions needs a separate RS-232 receiver or a full transceiver rather than treating the ADM234LANZ as a bidirectional transceiver.
What can replace the ADM234LANZ?
The closest documented substitutes are the ADM234LANZ family variants ADM234LARZ and ADM234LJNZ plus the MAX234EPE+, subject to package and operating-condition checks. The ADM234LJNZ is identified as a 16-pin DIP RS-232 device rated for 120 kbps, while the MAX234EPE+ is described as pin- and package-compatible. Confirm enable behavior, supply current, temperature range, and shutdown requirements before substitution.
Can MAX234EPE+ replace ADM234LANZ?
The MAX234EPE+ is a documented DIP-16 alternative to the ADM234LANZ, and the comparison describes its terminals and package as consistent with the Analog Devices part. Its stated 120 kbps data rate is 20% above the ADM234LANZ limit of 100 kbps. Before approving the replacement, verify the precise pin functions, power requirements, receiver population, and operating-temperature grade.
Is ADM234LANZ the same as ADM234LJNZ?
No. The ADM234LJNZ is a distinct ordering variant documented as a 16-pin DIP RS-232 interface rated for 120 kbps, whereas the ADM234LANZ is specified at 100 kbps and uses the PDIP-16 package. The 20 kbps difference is generally harmless for slower links, but the receiver configuration, shutdown function, temperature grade, and exact pin assignments must be compared before treating it as a drop-in replacement.
When should I choose ADM234LANZ over MAX234EPE+?
Choose the ADM234LANZ when the design requires the Analog Devices 100 kbps quad-driver configuration and an established PDIP-16 footprint. Choose the MAX234EPE+ when its documented 120 kbps capability and available lifecycle position better match the project. Neither choice should be based only on package shape; verify every pin, supply requirement, enable state, and RS-232 output level before release.
Is ADM234LANZ suitable for industrial equipment?
Yes. The ADM234LANZ is identified as an industrial-temperature-grade, through-hole PDIP-16 interface IC for EIA-232-E and V.28 links. Its single 4.5 V to 5.5 V supply is convenient for industrial controllers that do not provide ±12 V rails. The exact minimum and maximum junction or ambient temperatures must be confirmed in the manufacturer electrical-characteristics table for the production environment.
How should an ADM234LANZ RS-232 interface be protected?
Protect external RS-232 lines with an appropriately rated surge and ESD protection network near the connector or board edge. Keep unprotected driver traces short and route each output as a differential pair with the receiver ground reference. The Analog Devices application information provides the interface context, while the protection-device data sheet should establish the clamp voltage, capacitance, and current rating.
Where can I buy ADM234LANZ online?
Use the Request a Quote form on this page to request ADM234LANZ availability, lead time, and a quotation for the exact PDIP-16 industrial-grade part. The order code should be checked against the required package, temperature grade, and lead-free finish before approval. A complete purchase decision also requires confirmation of current inventory and production lifecycle status.
What is the lead time for ADM234LANZ?
The current production lead time and minimum order quantity should be requested through the Request a Quote form on this page. Lead time can vary with the exact ordering code, package form, and order quantity, so the manufacturer should confirm availability for the scheduled build. Engineers should also account for the time needed to validate any selected substitute before committing it to production.
Is ADM234LANZ in stock?
Current stock should be confirmed through the Request a Quote form on this page before placing a production order. The purchase request should identify the exact ADM234LANZ suffix, required quantity, delivery location, and target schedule. This avoids treating a listing or historical inventory observation as a guarantee of immediately available production supply.
What are the key specifications of ADM234LANZ that engineers should know?
The key ADM234LANZ specifications are four RS-232 driver channels, a 4.5 V to 5.5 V single-supply range, a 100 kbps maximum data rate, CMOS technology, and an industrial-grade PDIP-16 package. According to the Analog Devices datasheet, it supports EIA-232-E and V.28 interfaces without requiring separate ±12 V supplies. It is a driver-only device, so a receiver is required when the system also needs incoming data.

Datos de referencia de ingeniería para ADM234LANZ — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the ADM234LANZ when the board needs four outbound RS-232 signals, a single 4.5 V to 5.5 V supply, and a PDIP-16 footprint suitable for industrial or repairable through-hole assemblies. Choose ADM234LARZ when the same ADM234L interface is desired under a different ordering code, after checking the exact suffix and temperature grade. Choose ADM234LJNZ when its documented 120 kbps rating is useful and the pin configuration remains acceptable. Choose MAX234EPE+ when its 120 kbps capability, lifecycle position, or sourcing status better fits the production plan. No package-only substitution should be approved: verify the number of populated drivers and receivers, enable and shutdown behavior, supply current, temperature limits, output levels, and timing. Because the ADM234LANZ has transmitters but no receivers, use a separate receiver or transceiver when the application requires two-way communication.

Comparación con alternativas

Parámetro Este producto ADM234LARZ ADM234LJNZ ADM234LAQ ADM234LAR MAX234EPE+
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Maxim Integrated
Package PDIP-16, MO-095AC PDIP-16 DIP-16 PDIP-16 PDIP-16 PDIP-16
Maximum Data Rate 100 kbps 100 kbps-class 120 kbps 100 kbps-class 100 kbps-class 120 kbps
Mounting Type Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole

Diferenciadores clave

  • Single +5 V supply replaces external bipolar rails (frente a ADM232AARW)
  • Four dedicated transmitter channels (frente a MAX234EPE+)
  • Direct fit in industrial through-hole assemblies (frente a ADM234LJNZ)

Notas de diseño

Do not treat the ADM234LANZ as a complete RS-232 transceiver. It contains four transmitters and no receiver channels, so bidirectional communication requires a separate receiver or transceiver. Also verify the interface requirement is true RS-232 rather than TTL-level UART signaling. According to the Analog Devices datasheet, the drivers target EIA-232-E and V.28 levels; substituting a TTL-only driver would produce an unusable port.

Keep the supply within 4.5 V to 5.5 V and observe the device's specified absolute maximum rating of 5.5 V. The integrated charge-pump circuitry develops bipolar RS-232 transmitter levels from the single +5 V rail, so separate ±12 V supplies are unnecessary. Use local supply decoupling and route the ground return directly to the device; long or shared return paths can degrade transmitter levels and increase susceptibility to cable-induced transients.

Place the ADM234LANZ close to the external connector or protected board edge, and route every RS-232 output as a differential pair with a continuous reference ground. Avoid long unprotected stubs and sharp turns. Add the selected surge and ESD protection network at the connector boundary, and validate that its capacitance and clamp voltage remain compatible with the transmitter slew rate and data rate.

The ADM234LANZ uses a charge-pump design to create bipolar levels from +5 V, so pay attention to supply-current pulsations near the device. Keep the charge-pump supply path compact, provide effective local bypass capacitance, and avoid sharing narrow supply traces with switching regulators. If a system mixes this interface with sensitive analog circuitry, separate the RS-232 return path where possible and use star-point grounding to limit injected noise.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The exact ADM234LANZ suffix and manufacturer environmental declarations should be confirmed from the official product documentation before production release. AEC-Q100 is not applicable to this industrial interface IC.

Datos verificados el: 2026-11-14 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

ADM234LANZ datasheet ADM234LANZ datasheet pdf ADM234LANZ pinout ADM234LANZ specifications Analog Devices ADM234LANZ ADM234LANZ equivalent ADM234LANZ replacement ADM234LANZ drop-in substitute ADM234LANZ vs MAX234EPE+ ADM234LANZ PDIP-16 footprint ADM234LANZ 100kbps RS-232 driver ADM234LANZ 5V RS-232 interface ADM234LANZ price ADM234LANZ stock ADM234LANZ application circuit

Componentes & términos relacionados

Analog Devices ADM234LANZ ADM234LARZ ADM234LJNZ ADM234LAQ ADM234LAR MAX234EPE+ Maxim Integrated RS-232 EIA-232-E V.28 line driver interface IC CMOS PDIP-16 DIP-16 MO-095AC charge pump industrial control test instrumentation data acquisition legacy equipment single-supply interface ESD protection
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ