ADS1100A7IDBVRG4 - 16-Bit Self-Calibrating Delta-Sigma ADC | Texas Instruments
N.º de pieza: ADS1100A7IDBVRG4 ✗ Fin de vida| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $6.5 | $6,50 |
| 10 | $5.85 | $58,50 |
| 100 | $5.2 | $520,00 |
| 500 | $4.65 | $2.325,00 |
| 1.000 | $4.1 | $4.100,00 |
ADS1100A7IDBVRG4 Descripción general
An ADC (analog-to-digital converter) is an integrated circuit that converts continuous analog signals into discrete digital codes for processing by microcontrollers or DSPs. The delta-sigma (sigma-delta) architecture oversamples the input and uses noise-shaping to achieve high resolution and excellent noise rejection in low-frequency measurement applications such as sensor signal conditioning, industrial instrumentation, and portable measurement equipment.
Key features of the ADS1100A7IDBVRG4 include no missing codes at 16-bit resolution, INL of 0.0125% of FSR maximum, continuous self-calibration that eliminates offset and gain drift over time and temperature, single-cycle conversion settling, low noise of 4 microvolts peak-to-peak, and a low quiescent current of 90 microamps typical. The programmable data rate of 8, 16, 32, or 128 samples per second allows the user to trade resolution for speed.
The device integrates an oscillator, PGA, and I2C interface on-chip, eliminating the need for external components beyond bypass capacitors. The differential input topology rejects common-mode noise, making it well-suited for bridge sensors, thermocouples, and battery-cell monitoring. The internal clock and self-calibration simplify firmware and reduce long-term drift.
Typical applications include portable instrumentation, weigh scales, industrial process control, consumer temperature monitoring, and battery-powered sensor nodes. The SOT-23-6 footprint enables integration into space-constrained designs, while the I2C interface supports multi-device bus configurations for scalable measurement systems.
When designing with this part, note that the SOT-23-6 package requires careful PCB thermal management at higher data rates, and the I2C address is factory-programmed by part number suffix. Designers should consult the TI ADS1100 datasheet for the address selection options and self-calibration timing considerations.
This page synthesizes distributor pricing, drop-in alternatives from the ADS1100 family, and practical design notes not found in the manufacturer datasheet.
Alternativas directas para ADS1100A7IDBVRG4 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con ADS1100A7IDBVRG4 (mismo factor de forma y huella) — difiere en Resolution, Package, RoHS Status, Architecture, Data Rate.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
ADS1100A0IDBVR
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ADS1100A7IDBVR
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ADS1100A7IDBVT
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ADS1100A5IDBVRG4
✅ Sustitución directa✓ En stock
$2.4 / unidad
Ver hoja de datos →ADS1100A1IDBVR
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ADS1100A7IDBVRG4 Valores máximos y características eléctricas
| Resolución | 16 bits, no missing codes |
| Number of Input Channels | 1 differential |
| Architecture | Delta-Sigma (Sigma-Delta) |
| Velocidad de datos | 8 / 16 / 32 / 128 SPS (programmable) |
| Programmable Gain | 1, 2, 4, 8 (PGA) |
| INL (Max) | 0.0125% of FSR |
| Ruido de salida | 4 uVp-p |
| Input Type | Differential |
| Tensión de alimentación | 2.7 V to 5.5 V |
| Reference | Ratiometric (uses VDD) |
| Interfaz | I2C-compatible, 2-wire serial |
| Corriente en reposo | 90 uA typical |
| Self-Calibration | Continuous, automatic |
| Temperatura de funcionamiento | -40 C to +85 C |
| Encapsulado | SOT-23-6 (DBV) |
| Tipo de montaje | Surface Mount |
| Conversion Mode | Single-cycle settling |
| Estado RoHS | Compliant (G4 suffix indicates lead-free) |
Configuración de pines de ADS1100A7IDBVRG4
| Pin 1 | VDD — Power supply (2.7V to 5.5V) |
| Pin 2 | GND — Ground |
| Pin 3 | SCL — I2C serial clock input |
| Pin 4 | SDA — I2C serial data (bidirectional) |
| Pin 5 | AIN0 — Positive differential analog input |
| Pin 6 | AIN1 — Negative differential analog input |
Aplicaciones típicas
ADS1100A7IDBVRG4 es adecuado para 6 aplicacións: Portable Weigh Scale, Industrial Process Control Sensor, Battery-Powered Temperature Monitor, Consumer Thermostat Sensor Front-End, Portable Medical Measurement Device, IoT Environmental Sensor Node.
Portable Weigh Scale
The ADS1100A7IDBVRG4's 16-bit resolution with 0.0125% INL and integrated PGA (gain up to 8x) make it ideal for load cell signal conditioning in portable weigh scales. Its 4 uVp-p noise floor preserves measurement accuracy at microvolt-level bridge outputs, while the differential input rejects common-mode noise from motor and display circuits. The 90 uA quiescent current extends battery life, and the I2C interface enables direct connection to a microcontroller without external glue logic. According to TI ADS1100 datasheet, the continuous self-calibration eliminates offset drift over temperature.
Recomendado
Industrial Process Control Sensor
For industrial pressure, flow, or temperature transmitters, the ADS1100A7IDBVRG4 delivers reliable 16-bit measurements with programmable data rates up to 128 SPS. The differential input topology rejects common-mode noise from 4-20 mA loops and motor drive circuits typical in factory environments. According to TI ADS1100 datasheet, the 2.7V-5.5V supply range and ratiometric conversion simplify design with bridge sensors. The SOT-23-6 footprint enables compact module designs suitable for DIN-rail transmitter packages.
Recomendado
Battery-Powered Temperature Monitor
The ADS1100A7IDBVRG4's 90 uA quiescent current and single-supply operation from 2.7V to 5.5V suit battery-powered thermocouple and RTD temperature monitoring nodes. The integrated PGA amplifies low-level sensor outputs directly, eliminating external instrumentation amplifiers and reducing BOM cost. According to TI ADS1100 datasheet, the continuous self-calibration maintains accuracy over the -40 C to +85 C operating range. The I2C interface supports multi-channel systems by sharing a single bus with multiple ADC instances.
Recomendado
Consumer Thermostat Sensor Front-End
Smart thermostat designs benefit from the ADS1100A7IDBVRG4's small SOT-23-6 footprint and direct connection to thermistor or RTD bridges. The differential input rejects 50/60 Hz line noise common in HVAC environments, while the programmable data rate lets designers optimize for update speed vs power. According to TI ADS1100 datasheet, the 4 uVp-p noise ensures stable temperature readings without flicker. The I2C interface integrates seamlessly with Wi-Fi or BLE-enabled thermostat controllers.
Recomendado
Portable Medical Measurement Device
Blood pressure monitors, pulse oximeters, and handheld diagnostic equipment use the ADS1100A7IDBVRG4 to digitize pressure sensor and bioelectric signals with 16-bit precision. The low 90 uA quiescent current extends battery life in portable medical devices, while the differential input rejects common-mode interference from patient cables and ESD events. According to TI ADS1100 datasheet, the self-calibration ensures measurement stability over the device's operating life without periodic user recalibration.
Recomendado
IoT Environmental Sensor Node
Wireless sensor nodes for indoor air quality, soil moisture, or weather monitoring leverage the ADS1100A7IDBVRG4's compact SOT-23-6 package and low-power operation. The I2C interface allows multiple sensor types to share a single bus with the wireless MCU, reducing pin count and PCB area. According to TI ADS1100 datasheet, the programmable gain amplifier handles diverse sensor output ranges from soil moisture probes to gas sensor bridges without external signal conditioning.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para ADS1100A7IDBVRG4 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | ADS1100A0IDBVR | ADS1100A7IDBVR | ADS1100A7IDBVT | ADS1100A5IDBVRG4 | ADS1100A1IDBVR |
|---|---|---|---|---|---|---|
| Package | SOT-23-6 (DBV) | SOT-23-6 (DBV) - same | SOT-23-6 (DBV) - same | SOT-23-6 (DBV) - same | SOT-23-6 (DBV) - same | SOT-23-6 (DBV) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 16-bit | 16-bit | 16-bit | 16-bit | 16-bit | 16-bit |
| I2C Address Suffix | A7 | A0 | A7 | A7 | A5 | A1 |
| Reel Packaging | Tape & Reel (G4, lead-free) | Tape & Reel | Tape & Reel | Tape & Reel | Tape & Reel (G4) | Tape & Reel |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
| Supply Voltage | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V |
| Input Channels | 1 differential | 1 differential | 1 differential | 1 differential | 1 differential | 1 differential |
Diferenciadores clave
- I2C address suffix A7 for multi-device bus designs (frente a ADS1100A0IDBVR)
- Lead-free G4 packaging suffix (frente a ADS1100A7IDBVR (non-G4))
- Integrated oscillator eliminates external clock (frente a ADS1110 (external clock option))
Notas de diseño
Place the 0.1 uF VDD bypass capacitor as close as possible to pin 1 (VDD) and pin 2 (GND) of the SOT-23-6 package. Use a low-ESR ceramic capacitor (X7R or X5R dielectric) to suppress high-frequency noise from the digital I2C lines and improve conversion stability. According to TI ADS1100 datasheet layout guidelines, keep analog and digital ground returns separated to avoid ground loop noise coupling into the measurement.
The ADS1100A7IDBVRG4 performs ratiometric conversions using VDD as the reference. To maximize measurement accuracy, ensure the analog input signal and VDD share a common, low-impedance source. According to TI ADS1100 datasheet, ratiometric operation eliminates the need for a precision external voltage reference but requires stable VDD to achieve rated INL and noise specifications.
The I2C slave address is factory-programmed by part number suffix (A0, A1, A2, A3, A4, A5, A6, A7). According to TI ADS1100 datasheet, verify the firmware selects the correct address before substituting a different suffix part. Mixing suffixes on the same I2C bus causes address collisions unless the firmware dynamically detects device addresses. Also ensure SDA and SCL lines have proper pull-up resistors (typically 4.7 kOhm to 10 kOhm depending on bus capacitance).
Información de cumplimiento
G4 suffix indicates lead-free RoHS-compliant packaging per TI ordering information. Not AEC-Q100 qualified - this part is targeted at industrial and consumer applications, not automotive.