Texas Instruments

ADS1213U/1K - 22-Bit 4-Channel Delta-Sigma ADC | Texas Instruments

N.º de pieza: ADS1213U/1K ✓ Activo
5 V nominal Vdss 24-pin SOIC Package
MOQ: 1 |

ADS1213U/1K Descripción general

The Texas Instruments ADS1213U/1K is a 22-bit delta-sigma analog-to-digital converter with a four-channel analog input multiplexer, a 6.25-kSPS maximum conversion rate, an internal voltage reference, and a programmable gain amplifier. The device is packaged in a 24-pin SOIC and operates from a nominal 5 V supply over an industrial temperature range of -40 °C to +85 °C. These headline specifications position it as a precision serial-interface ADC for low-frequency instrumentation.

A delta-sigma ADC is a type of analog-to-digital converter that uses oversampling, digital filtering, and noise shaping to convert analog voltages into high-resolution digital data. The ADS1213 belongs to the ADC hierarchy that includes precision converters, serial-interface ADCs, and data-converter integrated circuits. Its four-input multiplexer allows one conversion system to monitor multiple analog nodes while retaining the resolution and low-speed measurement focus associated with high-performance delta-sigma conversion.

Key features include 22-bit resolution, four single-ended analog inputs, a 6.25-kSPS conversion rate, an internal reference, and a programmable gain amplifier. The flexible synchronous serial interface is SPI compatible and also supports a two-wire control mode for lower-cost isolation. The industrial-grade -40 °C to +85 °C range supports factory automation, process control, instrumentation, and embedded measurement systems where a small number of slowly changing analog signals must be digitized accurately.

The converter architecture emphasizes resolution rather than high-throughput sampling. Its 4-channel input structure reduces the number of separate converters needed when several sensors share a measurement system. An internal reference and PGA simplify analog front-end design by reducing external reference and gain-control requirements, although the final input range still depends on the selected gain and reference configuration. The serial interface permits compact PCB routing and straightforward connection to microcontrollers, DSPs, and industrial controllers.

Typical uses include pressure and temperature sensor acquisition, process-line monitoring, laboratory measurement equipment, factory automation, low-speed energy metering, and industrial data loggers. The ADS1213U/1K is especially appropriate when high resolution, multiple analog channels, and a compact 24-SOIC footprint matter more than thousands of conversions per second. It is less suitable for waveform capture, communications receivers, or other applications requiring wide bandwidth and very high sample rates.

Designers should determine the actual input range, digital filter behavior, data rate, and reference accuracy from the manufacturer datasheet before setting the analog front end. Input protection, source impedance, grounding, and serial-interface timing also need validation. Keep analog and digital return paths controlled, provide local supply bypassing, and account for the acquisition settling time of the delta-sigma conversion stage.

This page organizes the ADS1213U/1K specifications, verified source links, ordering information, drop-in substitution limits, comparison parameters, and application-focused design guidance. It highlights where the 22-bit resolution and four-channel multiplexing add value while preserving an explicit distinction between confirmed ordering variants and functionally similar devices that require redesign.

Alternativas directas para ADS1213U/1K — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con ADS1213U/1K (mismo factor de forma y huella) — difiere en Input Multiplexer, Programmable Gain Amplifier, Resolution, Analog Input Channels, Architecture.

Texas Instruments
Input Multiplexer: 4-channel
Programmable Gain Amplifier: 1, 2, 4, 8, 16
Resolution: 22 bits (no missing codes)
Texas Instruments
Input Multiplexer: 4 differential or 8 single-ended inputs
Programmable Gain Amplifier: Programmable
Analog Input Channels: 8 channels

ADS1213U/1KG4

✅ Sustitución directa
📦 24-pin SOIC
Same 22-bit resolution, 4-channel multiplexing, 6.25-kSPS maximum rate, and 24-SOIC footprint; 0% difference in these published core specifications, with only the ordering suffix differing

📋 Alternativa de referencia (no en el catálogo)

ADS1213U/1K Valores máximos y características eléctricas

Resolución 22 bit
Maximum Conversion Rate 6.25 kSPS
Analog Input Channels 4 channels
Architecture Delta-sigma ADC
Analog Supply Voltage 5 V nominal
Digital Supply Voltage 5 V nominal
Rango de temperatura de funcionamiento -40 °C to +85 °C
Encapsulado 24-pin SOIC
Terminal Count 24 terminals
Tipo de montaje Surface mount
Internal Voltage Reference Yes
Programmable Gain Amplifier Yes
Synchronous Serial Interface SPI compatible
Two-Wire Control Mode Supported
Input Multiplexer 4-channel analog input multiplexer

Guía de configuración de pines de ADS1213U/1K 24-pin soic

Configuración de pines para ADS1213U/1K (encapsulado 24-pin soic). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 24-pin soic para ADS1213U/1K

No hay datos detallados de patillaje disponibles para ADS1213U/1K.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

ADS1213U/1K es adecuado para 6 aplicacións: Industrial Pressure and Temperature Sensing, Process Line Monitoring, Laboratory Instrument Data Acquisition, Data Logging and Environmental Monitoring, Low-Speed Energy Measurement, Precision Test and Measurement.

🏭

Industrial Pressure and Temperature Sensing

The ADS1213U/1K fits industrial sensor acquisition when several slow-changing inputs must be digitized with better resolution than a conventional low-cost ADC. Its four-channel analog multiplexer reduces the number of converter packages needed for pressure, temperature, and level signals, while 22-bit resolution preserves fine measurement detail across a scaled input range. The 6.25-kSPS maximum conversion rate is more than adequate for continuously updated process values. A nominal 5 V supply and the -40 °C to +85 °C operating range suit factory equipment. Use the PGA and internal reference to establish the analog scaling, while checking the datasheet for channel selection, input limits, settling behavior, and recommended sensor excitation circuitry.

🏭

Process Line Monitoring

The ADS1213U/1K is suitable for process-line monitoring where analog pressure, flow, or chemical-sensor signals change over seconds or minutes rather than at audio or communications bandwidths. Its four analog inputs allow a controller to monitor several related measurement points, while the 22-bit delta-sigma conversion provides a high-resolution digital representation for calibration and alarming logic. The 6.25-kSPS ceiling provides useful response for slow process variables without imposing the power and complexity associated with a fast waveform ADC. Its 24-pin SOIC package supports compact surface-mount assembly, and the SPI-compatible synchronous interface simplifies connection to a plant controller.

🔧

Laboratory Instrument Data Acquisition

The ADS1213U/1K can serve as the measurement ADC in laboratory instruments that digitize low-frequency analog inputs with high resolution. Four multiplexed inputs let the instrument share one converter across sensor, reference, or status channels, while the internal reference and programmable gain amplifier help organize the measurement chain. A 22-bit converter and 6.25-kSPS maximum rate are well matched to temperature, strain, potentiometric, and other slowly varying laboratory signals. The serial interface reduces signal-routing complexity in a multi-board instrument. For bench and laboratory use, define the intended input bandwidth, digital-filter setting, settling time, and calibration procedure in the firmware before finalizing analog scaling and sampling timing.

🧩

Data Logging and Environmental Monitoring

The ADS1213U/1K is appropriate for environmental and industrial data loggers that combine multiple slow sensor channels with a compact controller. Four analog inputs can capture temperature, humidity, light, or analog gas-sensor outputs, and the 22-bit resolution supports fine-grained readings after front-end scaling. The 6.25-kSPS maximum rate is suitable for periodic logging rather than real-time waveform analysis, helping the system focus on resolution and measurement repeatability. Its 24-SOIC package and SPI-compatible synchronous interface suit dense instrument boards. Designers should establish channel-switching order, per-channel settling delays, digital averaging, and power-cycling strategy so that the logged values reflect the actual sensor bandwidth rather than the converter’s maximum advertised rate.

⚡

Low-Speed Energy Measurement

The ADS1213U/1K can support low-speed energy and power monitoring when the target signal changes over a measurement interval and high-resolution ADC data improves the quality of the calculated result. Its four-channel multiplexer can monitor current, voltage, or auxiliary sensing channels sequentially, while 22-bit resolution provides ample numerical headroom for carefully scaled inputs. The 6.25-kSPS maximum rate is appropriate for metering rather than capturing individual high-frequency switching waveforms. The internal reference and programmable gain amplifier assist with signal conditioning, and the compact 24-SOIC footprint simplifies board integration. Confirm whether the intended meter requires simultaneous sampling, antialias filtering, or a separate high-speed front end before assigning the converter to the final measurement path.

🔧

Precision Test and Measurement

The ADS1213U/1K fits precision test equipment that evaluates slow, high-impedance analog sources and requires more resolution than a basic instrumentation ADC. Four inputs can support sequential measurement of a device under test, a reference node, and auxiliary monitor channels, while 22-bit resolution improves visibility into small deviations around a calibrated value. The 6.25-kSPS rate is suitable for settled measurements rather than continuous high-speed sampling. Its SPI-compatible synchronous interface allows straightforward connection to a test controller, and the internal reference and PGA help create a repeatable measurement front end. The final design should account for source settling, leakage, input protection, digital filtering, and calibration error to ensure that measured resolution translates into useful system accuracy.

Resumen de productos recomendados

ADS1213U/1KG4 Same-family 24-SOIC ordering alternative Se usa en: Industrial Pressure and Temperature Sensing, Process Line Monitoring, Laboratory Instrument Data Acquisition, Data Logging and Environmental Monitoring, Low-Speed Energy Measurement, Precision Test and Measurement
What is the ADS1213U/1K?
The ADS1213U/1K is a 22-bit, four-channel delta-sigma analog-to-digital converter from Texas Instruments with a maximum conversion rate of 6.25 kSPS. According to the Texas Instruments ADS1213 product page, it includes a voltage reference and programmable gain amplifier, and the /1K ordering code identifies the 24-pin SOIC tape-and-reel configuration.
What are the key specifications of ADS1213U/1K that engineers should know?
The ADS1213U/1K combines 22-bit resolution, four analog input channels, a 6.25-kSPS maximum data rate, an internal reference, and a programmable gain amplifier. Texas Instruments identifies a nominal 5 V analog and digital supply and an industrial operating range of -40 °C to +85 °C. The device uses an SPI-compatible synchronous serial interface and is offered in a 24-pin SOIC package.
How many analog inputs does ADS1213U/1K have?
The ADS1213U/1K has four analog input channels selected through an integrated analog multiplexer. According to the Texas Instruments product information, the ADS1213 also provides an internal voltage reference and programmable gain amplifier. This combination makes the converter suitable for systems that must measure several slow analog signals without using one dedicated converter per channel.
What is the maximum sampling rate of ADS1213U/1K?
The maximum conversion rate of the ADS1213U/1K is 6.25 kSPS. The Texas Instruments ADS1213 product page identifies the device as a 22-bit delta-sigma ADC with a 6.25-kSPS maximum rate. This rate is appropriate for precision process, sensor, and instrumentation measurements, but it is not intended for high-bandwidth waveform capture.
Where can I download the ADS1213U/1K datasheet and pinout?
The official ADS1213U/1K technical information is available on the Texas Instruments ADS1213 product page at https://www.ti.com/product/ADS1213. Use the datasheet and pin-configuration sections to assign the 24 SOIC connections, confirm supply pins, and review the recommended application circuit. The product page is the preferred source for ordering options, quality information, and the latest manufacturer documentation.
What interface does ADS1213U/1K use?
The ADS1213U/1K uses a flexible synchronous serial interface that is SPI compatible and also offers a two-wire control mode. Texas Instruments describes the two-wire option as useful for low-cost isolation. The interface choice allows the same converter family to serve ordinary microcontroller interfaces or isolated measurement systems, subject to the electrical and timing requirements in the datasheet.
Is ADS1213U/1K suitable for industrial sensor measurement?
Yes, the ADS1213U/1K is suitable for industrial sensor measurement because it combines four inputs with 22-bit resolution and an operating temperature range of -40 °C to +85 °C. Its 6.25-kSPS maximum rate fits temperature, pressure, flow, and level signals that change slowly. The programmable gain amplifier and internal reference can simplify front-end design, while the serial interface reduces PCB wiring.
Is ADS1213U/1K the same as ADS1213U?
The ADS1213U/1K and ADS1213U belong to the same ADS1213 converter family and use the 24-pin SOIC footprint, but their ordering suffixes can specify different delivery configurations. Texas Instruments lists ADS1213U as the base SO-24 device and ADS1213U/1K as the tape-and-reel orderable version. Confirm the required carrier style, temperature grade, and marking before substituting one order code for another.
What can replace ADS1213U/1K?
ADS1213U/1KG4 is the closest listed ordering alternative because it retains the same ADS1213 family, 22-bit resolution, four-channel multiplexing, 6.25-kSPS rate, and 24-SOIC footprint. The distinction is in the orderable suffix rather than the converter architecture. Verify reel orientation, marking, terminal configuration, and required qualifications before using it as a drop-in procurement alternative.
Is ADS1213U/1K a drop-in replacement for ADS1213U/1KG4?
ADS1213U/1K can generally serve as a procurement substitute for ADS1213U/1KG4 when the same 24-SOIC footprint and core electrical functions are required. Both parts are listed within the ADS1213 family with the same 22-bit conversion function and four-channel input structure. The ordering suffix differs, so production documentation should still confirm package marking, reel orientation, and any customer-specific qualification requirements.
When should I choose ADS1213U/1K over a lower-resolution ADC?
Choose the ADS1213U/1K when measurement resolution and low-frequency accuracy are more important than high conversion throughput. Its 22-bit resolution, four-channel multiplexer, internal reference, and programmable gain amplifier can reduce analog-front-end complexity. A lower-resolution ADC may be appropriate for simple threshold monitoring, but it cannot provide the same numerical measurement span without additional amplification or calibration.
ADS1213U/1K vs ADS1213E/1K: which is preferable?
ADS1213U/1K is the better choice when the exact ADS1213U orderable configuration is required, while ADS1213E/1K should be selected only after its pin and electrical details are confirmed against the current manufacturer documentation. Cross-reference information associates both parts with the ADS1213 family and a 24-pin SOIC, but package family similarity alone does not prove that every terminal and electrical characteristic is identical.
Where can I buy ADS1213U/1K and request current pricing?
Use the Request a Quote form on this page to request current ADS1213U/1K pricing, stock confirmation, and lead time. The part is an active Texas Instruments catalog device with a 24-SOIC industrial package. A current quotation establishes commercial availability and any quantity-break terms without relying on stale catalog pricing.
What is the lead time and stock status of ADS1213U/1K?
Request the current ADS1213U/1K lead time and stock position through the Request a Quote form on this page. Commercial availability can change independently of the component’s technical lifecycle status. When requesting a quotation, identify the required quantity, reel quantity, and whether partial quantities or scheduled delivery are acceptable for the manufacturing plan.
Is ADS1213U/1K in stock?
Current ADS1213U/1K stock should be confirmed through the Request a Quote form on this page. Texas Instruments identifies the ADS1213 as an active product family, but active lifecycle status does not guarantee inventory for every package, reel, or order quantity. Provide your required quantity and production schedule so the latest allocation can be checked.
Does ADS1213U/1K support automotive or industrial qualification?
ADS1213U/1K is specified for an industrial operating range of -40 °C to +85 °C, but that temperature rating should not be treated as AEC-Q100 qualification. The manufacturer product page and ordering information determine the formal quality and qualification status. Confirm any AEC-Q100, ISO, or customer-specific qualification requirements directly with Texas Instruments before using the device in safety-critical or automotive equipment.

Datos de referencia de ingeniería para ADS1213U/1K — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose ADS1213U/1K when the design needs high-resolution measurement from up to four slow analog inputs, particularly for industrial sensors, process monitoring, laboratory instrumentation, or data logging. Its 22-bit resolution, 6.25-kSPS maximum rate, internal reference, programmable gain amplifier, and SPI-compatible interface provide a compact precision-conversion solution. ADS1213U/1KG4 is the closest listed drop-in ordering alternative because its published core specifications and 24-SOIC footprint match; confirm reel details, marking, and production requirements before substitution. ADS1213U may be useful when a different base ordering or carrier configuration is acceptable, but it is not presented as a distinct engineering alternative. The ADS1213P and ADS1213E families should not be treated as drop-in choices without complete pin and electrical verification. For high-bandwidth waveform, simultaneous-sampling, or communications applications, choose a converter with a materially faster data rate instead.

Comparación con alternativas

Parámetro Este producto ADS1213U/1KG4
Brand Texas Instruments Texas Instruments
Package 24-pin SOIC 24-pin SOIC
Resolution 22 bit 22 bit
Maximum Conversion Rate 6.25 kSPS 6.25 kSPS
Analog Input Channels 4 channels 4 channels
Architecture Delta-sigma ADC Delta-sigma ADC
Nominal Supply Voltage 5 V 5 V
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C
Internal Reference Yes Yes
Programmable Gain Amplifier Yes Yes

Diferenciadores clave

  • Closest ordering alternative retains identical core conversion specifications (frente a ADS1213U/1KG4)
  • Four-channel integration reduces separate converter demand (frente a ADS1213U/1KG4)
  • Precision conversion speed is tailored to slow industrial signals (frente a ADS1213U/1KG4)

Notas de diseño

Route analog inputs away from the SPI clock, serial data, and digital supply return paths. Keep the analog front end close to the converter and use a continuous ground plane beneath the device and its input network. Because the four-channel multiplexer shares one conversion core, maintain symmetric input routing and controlled source impedances to reduce channel-dependent errors. Review the manufacturer recommended-layout diagram before finalizing trace spacing and component placement.

Place the analog and digital bypass capacitors at their associated supply pins and follow the capacitance and placement guidance in the manufacturer datasheet. The nominal supply is 5 V, but the permitted operating range must be checked before applying that nominal value to the final rail. Keep switching-regulator and digital logic away from sensitive analog nodes, and verify supply-noise behavior with the configured PGA gain and digital filter because gain can amplify input-referred disturbance.

Do not treat the 6.25-kSPS maximum rate as the instantaneous conversion time for every multiplexer selection. Account for analog settling, digital-filter latency, and any required averaging before calculating the usable output rate. Likewise, 22-bit converter resolution does not guarantee 22-bit system accuracy; sensor nonlinearity, reference error, resistor tolerance, noise, grounding, and input filtering determine the final measurement precision.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The manufacturer identifies an industrial -40 °C to +85 °C temperature range, but the available product information does not explicitly confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields should be checked against the current manufacturer product documentation and production qualification records.

Búsquedas relacionadas

ADS1213U/1K datasheet ADS1213U/1K pinout ADS1213U/1K datasheet pdf ADS1213U/1K equivalent ADS1213U/1K replacement ADS1213U/1K cross reference ADS1213U/1K price ADS1213U/1K stock Texas Instruments ADS1213U/1K ADS1213U 22-bit ADC ADS1213U 24-SOIC pinout ADS1213U industrial sensor ADC ADS1213U/1K vs ADS1213U/1KG4 ADS1213U 6.25 kSPS converter

Componentes & términos relacionados

Texas Instruments ADS1213U/1K ADS1213U/1KG4 ADS1213U ADS1213E/1K ADS1213P Analog-to-digital converter Delta-sigma ADC Precision ADC Serial-interface ADC Data-converter integrated circuit Four-channel analog multiplexer Programmable gain amplifier Internal voltage reference SPI-compatible synchronous serial interface Two-wire control mode 22-bit resolution 6.25-kSPS conversion rate 24-pin SOIC SOIC package family Surface-mount device Industrial temperature range Process monitoring Sensor acquisition Data logging
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ