Texas Instruments

ADS7822UC - 12-Bit 200kSPS Micro-Power ADC | Texas Instruments

N.º de pieza: ADS7822UC ✓ Activo
2.7V to 5.25V Vdss 8-pin SOIC Package 200 kSPS Speed
MOQ: 1 |

ADS7822UC Descripción general

Texas Instruments ADS7822UC is a 12-bit, 200kSPS micro-power sampling analog-to-digital converter with one SAR input, a serial interface, and an 8-pin SOIC package. It operates from a 2.7V to 5.25V supply and is designed for low-power acquisition systems that require accurate conversion performance without a high-rate ADC's typical power burden. The combination of 12-bit resolution, 200kSPS throughput, and a compact SOIC-8 package makes the ADS7822UC suitable for industrial control, sensor measurement, portable instrumentation, and embedded data acquisition.

A sampling ADC, also called a successive-approximation-register ADC or SAR ADC, converts an analog input into a digital code through a sequence of internal comparisons. The ADS7822UC belongs to the ADC data-converter hierarchy within semiconductor signal-chain and data-acquisition systems. Its one-input architecture simplifies analog routing and allows the converter to serve as the central measurement element between sensors, conditioning circuitry, and a microcontroller or embedded processor.

The principal operating specifications are 12-bit resolution, a maximum sampling rate of 200kSPS, and a 2.7V to 5.25V analog and digital supply range. The manufacturer identifies the device as a micro-power part even while operating at the full 200kSPS conversion rate. It is packaged in an 8-pin SOIC, providing a small surface-mount option for boards with limited connector and component space. The serial interface also reduces the number of parallel data lines required between the converter and the controlling digital device.

The SAR architecture is appropriate when each acquisition cycle requires a direct conversion result rather than continuous filtering. The 200kSPS rate provides enough conversion bandwidth for many sensor, potentiometer, and control signals while keeping the converter compact and economical. Because the device accepts a 2.7V minimum supply, it can operate alongside 3.3V system logic, while its 5.25V maximum rating supports 5V-compatible analog and digital environments.

Typical uses include industrial process monitoring, portable measurement instruments, battery-powered sensor nodes, digital potentiometer feedback, and embedded control loops. In a typical system, the analog input is conditioned, sampled by the ADS7822UC, and transferred through its serial interface to a microcontroller. Designers should use the pin-description table and application guidance in the manufacturer datasheet when assigning signal, reference, clock, and logic connections.

Careful layout remains important because the ADC is part of a precision measurement chain. Keep the analog input path short, provide the supply bypassing specified by the manufacturer, and route digital clock and data signals away from sensitive input nodes. The serial interface simplifies synchronization, but the controller must still meet the required clock and conversion timing to obtain consistent results.

This product page combines the verified manufacturer specifications, package information, sourcing guidance, and application-oriented design considerations. It also identifies the closest same-family ordering options and distinguishes them by package, temperature-grade, and ordering-code characteristics so engineers can assess replacement options without treating merely similar ADCs as drop-in substitutes.

Alternativas directas para ADS7822UC — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con ADS7822UC (mismo factor de forma y huella) — difiere en Architecture, Supply Voltage Range.

Texas Instruments
Architecture: Successive-approximation converter (SAR)
Supply Voltage Range: 2.7 V to 5.25 V
Comparar con ADS7822UC →

ADS7822U

✅ Sustitución directa
Texas Instruments
📦 8-pin SOIC
Sampling analog-to-digital converter · Successive-approximation converter (SAR) · 12 bit · 200 kSPS · 1 input · 1 channel · 2.7 V to 5.25 V · Serial interface

Consulte el precio

Ver hoja de datos →

ADS7822UBG4

✅ Sustitución directa
📦 8-pin SOIC
Same 12-bit resolution and 200kSPS sampling rate, a 0% change in both headline conversion ratings; order code and production-grade marking differ.

📋 Alternativa de referencia (no en el catálogo)

ADS7822UC/2K5

✅ Sustitución directa
📦 8-pin SOIC
Same 12-bit resolution and 200kSPS sampling rate, a 0% change in both headline conversion ratings; this ordering code specifies the 2K5 reel configuration.

📋 Alternativa de referencia (no en el catálogo)

ADS7822UC/2K5G4

✅ Sustitución directa
📦 8-pin SOIC
Same 12-bit resolution and 200kSPS sampling rate, a 0% change in both headline conversion ratings; the G4 ordering suffix identifies a different production marking configuration.

📋 Alternativa de referencia (no en el catálogo)

ADS7822UC Valores máximos y características eléctricas

Resolución 12 bit
Frecuencia de muestreo 200 kSPS
Input Type Single-ended analog input
Architecture Successive-approximation-register (SAR)
Number of Input Channels 1 channel
Supply Voltage Range 2.7V to 5.25V
Output Interface Serial
Encapsulado 8-pin SOIC
Tipo de montaje Surface mount
Temperature Grade -40°C to 85°C
Power Classification Micro-power
Conversion Rate at Full-Speed Operation 200 kSPS
Analog Input AIN0 and AIN1
Reference Input VREF
Digital Interface Signals CS, DIN, and SCLK
Package Height 1.75 mm maximum

Configuración de pines de ADS7822UC

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 CS — Active-low chip-select input
Pin 2 DIN — Serial data input
Pin 3 SCLK — Serial clock input
Pin 4 GND — Ground connection
Pin 5 AIN0 — Analog input channel 0
Pin 6 AIN1 — Analog input channel 1
Pin 7 VREF — Reference-voltage input
Pin 8 VCC — Analog and digital supply input

Aplicaciones típicas

ADS7822UC es adecuado para 6 aplicacións: Industrial Sensor Measurement, Portable Battery-Powered Instrument, Digital Potentiometer Feedback, Embedded Control Acquisition, Data Acquisition and Logging, Precision Analog Monitoring.

🏭

Industrial Sensor Measurement

The ADS7822UC fits industrial sensor acquisition because it combines 12-bit resolution with a 200kSPS conversion rate while operating from 2.7V to 5.25V. Place the converter behind the sensor's analog conditioning stage, then use CS, DIN, and SCLK to transfer each conversion to a microcontroller. The 200kSPS capability supports responsive process monitoring without requiring a high-power continuous-conversion ADC. In a 24V industrial system, regulate the analog rail to 5V or 3.3V before the converter and keep the analog trace short. Design the layout around the manufacturer pin configuration and bypass recommendations, since sensor accuracy can be limited by reference noise, input settling, and mixed-signal coupling rather than by converter resolution alone.

📱

Portable Battery-Powered Instrument

The ADS7822UC is suitable for portable instruments because its 200kSPS sampling rate is paired with micro-power operation and a 2.7V minimum supply. A battery-powered meter can operate the ADC from a 3.3V rail, use its single analog input for a conditioned transducer signal, and communicate results over the serial interface. The 12-bit result supports measurements that need more precision than a basic control-ADC input while keeping the converter in an 8-pin SOIC package. Because portable products are sensitive to energy use, enable the converter only during acquisition cycles where the application permits it and avoid leaving the serial interface in a continuously active state. Final battery-life calculations should use the converter's operating and standby currents from the manufacturer datasheet.

🔧

Digital Potentiometer Feedback

The ADS7822UC can digitize a wiper or feedback voltage produced by a digital potentiometer in control and calibration systems. Its single input keeps the analog channel count simple, while the 200kSPS rate allows the controller to sample a changing feedback signal quickly enough for closed-loop position or gain measurement. The 12-bit code provides 4096 discrete output levels for a direct unipolar input, making the converter appropriate for proportional feedback rather than precision instrumentation-grade measurement. Place the wiper connection on a short analog trace and use the external reference and supply decoupling shown in the manufacturer application guidance. This arrangement is useful when a microcontroller needs the actual wiper position for calibration, monitoring, or fault detection rather than only the value sent to the pot.

🧩

Embedded Control Acquisition

The ADS7822UC provides a dedicated measurement channel for embedded control systems that must observe an analog variable while executing timing-sensitive digital functions. A 200kSPS maximum rate gives the control loop more acquisition opportunities than a slow embedded ADC may provide, and the serial interface keeps the connection to the controller compact. The device accepts a 2.7V to 5.25V supply, allowing it to operate in 3.3V control systems without a separate high-voltage analog rail. Use CS to frame the conversion, DIN for the serial data path, and SCLK for clocking, following the timing limits in the datasheet. Confirm that acquisition latency and control-loop timing remain acceptable for the selected MCU, and do not use the 200kSPS headline rate as a substitute for an end-to-end response-time calculation.

🖥️

Data Acquisition and Logging

The ADS7822UC is appropriate for compact data-acquisition and logging modules that sample a conditioned analog channel at a controlled rate. Its 12-bit resolution defines the digital result width, while the 200kSPS capability permits bursts of samples for signal monitoring without requiring a high-resolution converter. The serial interface allows the module to connect to a logger or communications processor through a small number of signals, and the 8-pin SOIC package supports dense analog front ends. Engineers should define the required acquisition bandwidth before selecting the operating rate, then account for acquisition time and serial-transfer time when calculating the real sample throughput. Keep clock routing away from the analog input and reference nodes, and verify settling behavior when the source impedance or filter changes between measurement channels.

📺

Precision Analog Monitoring

The ADS7822UC can monitor low-bandwidth analog conditions in instrumentation when the system requires a dedicated 12-bit sampling converter. The 2.7V to 5.25V operating range supports both 3.3V and 5V analog environments, while 200kSPS throughput is more than sufficient for many temperature, level, and position measurements. Route the monitored signal through appropriate conditioning before AIN0 or AIN1 so that the converter receives a voltage within its valid input range. The reference connection and supply bypass network are central to measurement repeatability, so follow the manufacturer's recommended component and layout values. For systems requiring traceable calibration, include offset, gain, and reference errors in the overall accuracy budget rather than attributing all uncertainty to the converter's 12-bit resolution.

Resumen de productos recomendados

ADS7822UC Texas Instruments Se usa en: Industrial Sensor Measurement, Portable Battery-Powered Instrument, Digital Potentiometer Feedback, Embedded Control Acquisition, Data Acquisition and Logging, Precision Analog Monitoring ADS7822UC/2K5 Orderable 8-pin SOIC configuration Se usa en: Industrial Sensor Measurement, Data Acquisition and Logging ADS7822UC/2K5G4 Production-marked 8-pin SOIC ordering option Se usa en: Portable Battery-Powered Instrument ADS7822U Texas Instruments Se usa en: Digital Potentiometer Feedback, Precision Analog Monitoring ADS7822UBG4 Same-family 8-pin SOIC ordering option Se usa en: Embedded Control Acquisition
What are the key specifications of ADS7822UC that engineers should know?
The ADS7822UC is a 12-bit, single-input SAR ADC capable of 200kSPS conversion and operation from 2.7V to 5.25V. According to the Texas Instruments product page and manufacturer datasheet, it uses a serial interface and is offered in an 8-pin SOIC package. Its central advantage is the combination of micro-power operation, moderate sampling speed, and a compact package for embedded measurement systems.
What is the operating voltage range of ADS7822UC?
The ADS7822UC operates from 2.7V to 5.25V. Texas Instruments states that its ensured specifications cover this complete supply range, allowing operation from 3.3V-compatible systems through 5V-compatible analog and digital environments. The selected supply must also remain consistent with the voltage levels presented to the serial interface and analog input circuitry.
How fast can ADS7822UC perform analog-to-digital conversions?
The ADS7822UC supports a maximum sampling rate of 200kSPS. The Texas Instruments product page describes it as a 12-bit, 200kSPS micro-power sampling ADC and specifically notes that it requires little power even at the full conversion rate. This rate is suitable for many sensor, control, and data-acquisition channels that do not require continuous-waveform converter architectures.
Where can I download the ADS7822UC datasheet PDF?
The official ADS7822UC datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/gpn/ADS7822. The manufacturer datasheet is the preferred document for pin assignments, electrical characteristics, timing, and recommended application circuits. Use the package drawing and pin-description table when assigning the 8-pin SOIC footprint.
Where can I find the ADS7822UC pinout?
The ADS7822UC pinout is shown in the pin-configuration and package-outline sections of the Texas Instruments ADS7822 datasheet. The device uses an 8-pin SOIC with power, ground, analog-input, reference, chip-select, serial-data, and serial-clock connections. Use the numbered package drawing and pin-description table when making PCB assignments.
Is ADS7822UC suitable for low-voltage embedded measurement systems?
Yes, the ADS7822UC is suitable for low-voltage embedded measurement systems because its 2.7V minimum supply voltage supports 3.3V designs. Texas Instruments specifies 12-bit resolution and a maximum 200kSPS rate while classifying the converter as micro-power. These characteristics fit compact sensor nodes, portable instruments, and control boards that need more precision than a low-cost internal controller ADC may provide.
What can replace ADS7822UC?
The closest documented replacements are same-family ADS7822 ordering variants that retain the 8-pin SOIC footprint, 12-bit resolution, and 200kSPS conversion rate. ADS7822U, ADS7822UBG4, ADS7822UC/2K5, and ADS7822UC/2K5G4 are the closest options identified for this device. Confirm temperature grade, tape-and-reel details, device marking, and acquisition timing before production use.
Is ADS7822UC the same as ADS7822UC/2K5?
The ADS7822UC/2K5 denotes the manufacturer ordering option for the ADS7822UC device in an 8-pin SOIC package, while ADS7822UC is the base part designation. The TI part-details listing identifies ADS7822UC/2K5 as a 12-bit, 200kSPS converter in an 8-pin SOIC. The exact purchasing code should be confirmed against the required package, reel configuration, and production marking.
ADS7822UC vs ADS7822U: which ordering option should I choose?
Both options identify a 12-bit, 200kSPS ADS7822-family converter in an 8-pin SOIC configuration. Their documented ordering codes differ, so engineers should compare the manufacturer order table for temperature grade, packaging code, and marking. The verified product information confirms identical headline conversion specifications for both, while the order-table fields determine the exact manufactured configuration.
When should I choose ADS7822UC over another 12-bit ADC?
Choose the ADS7822UC when the design needs a verified combination of 12-bit resolution, 200kSPS sampling, a 2.7V to 5.25V supply range, and an 8-pin SOIC footprint. It is particularly suitable for compact embedded acquisition and control systems that can use a serial interface. A different ADC should be selected only when its accuracy, input architecture, interface, timing, or package better satisfies the application.
What is the best drop-in replacement for ADS7822UC?
ADS7822UC/2K5 is the closest documented ordering option because it identifies the same ADS7822 converter in the 8-pin SOIC package. ADS7822UBG4 and ADS7822U are additional same-family ordering candidates, but each must be checked against the required temperature range and reel or tube format. Cross-brand equivalents were not identified as confirmed pin-compatible replacements, so an unverified substitute should not be treated as drop-in.
Where can I buy ADS7822UC online?
Use the Request a Quote form on this page to request ADS7822UC availability, quantity breaks, and current lead time. The form connects the request directly with XAIPART without requiring you to compare multiple sellers. Quote terms depend on the selected packaging, order quantity, component condition, and current manufacturing availability.
What is the price of ADS7822UC?
The current unit price for ADS7822UC is displayed through the structured pricing area or the Request a Quote form on this page. Because pricing changes with quantity, packaging, and market conditions, request a quote for the exact configuration and quantity required for the production BOM. The form is the appropriate route for current commercial terms.
What is the lead time for ADS7822UC?
Request the current ADS7822UC lead time through the Request a Quote form on this page. Lead time can vary with order quantity, reel or tube packaging, component condition, and production scheduling. Supply confirmation should be obtained before committing a date-sensitive prototype or manufacturing plan.
Is ADS7822UC in stock?
Current ADS7822UC stock should be confirmed through the Request a Quote form on this page. The form can establish availability for the requested quantity and packaging format rather than relying on a generic inventory statement. For production planning, include the required delivery date so the supplier can confirm the appropriate allocation.
Are ADS7822UC and its alternatives RoHS compliant?
The Texas Instruments ADS7822 family is associated with lead-free and surface-mount manufacturing, but the specific RoHS and REACH declarations should be confirmed on the selected orderable part's manufacturer documentation. Automotive AEC-Q100 qualification is also distinct from ordinary RoHS compliance. Compliance status for the exact ordering code should be reviewed before release to a regulated customer.

Datos de referencia de ingeniería para ADS7822UC — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose ADS7822UC when the design requires a 12-bit SAR ADC with a maximum rate of 200kSPS, a 2.7V to 5.25V supply range, and an 8-pin SOIC footprint. It is a strong fit for 3.3V embedded acquisition, industrial sensor measurement, compact instruments, and control systems that benefit from a dedicated measurement converter. ADS7822U is appropriate when its ordering-code grade and packaging fields satisfy the production plan. ADS7822UBG4 is the closest option for a design requiring that specific marked ordering configuration. ADS7822UC/2K5 and ADS7822UC/2K5G4 preserve the same package and core conversion specifications while specifying different reel or marking arrangements. Because these are same-family ordering variants, verify temperature grade, tape-and-reel format, and production marking before substitution. No cross-brand drop-in equivalent was confirmed, so a different manufacturer's ADC should be treated as a redesign unless its pinout and full timing and electrical requirements are independently verified.

Comparación con alternativas

Parámetro Este producto ADS7822U ADS7822UBG4 ADS7822UC/2K5 ADS7822UC/2K5G4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC - same 8-pin SOIC - same 8-pin SOIC - same 8-pin SOIC - same
Resolution 12 bit 12 bit 12 bit 12 bit 12 bit
Sampling Rate 200 kSPS 200 kSPS 200 kSPS 200 kSPS 200 kSPS
Supply Voltage Range 2.7V to 5.25V 2.7V to 5.25V 2.7V to 5.25V 2.7V to 5.25V 2.7V to 5.25V
Architecture Single-input SAR Single-input SAR Single-input SAR Single-input SAR Single-input SAR
Output Interface Serial Serial Serial Serial Serial
Ordering Configuration ADS7822UC ADS7822U ordering code ADS7822UBG4 ordering code ADS7822UC with 2K5 reel code ADS7822UC with 2K5 reel and G4 marking codes
Power Classification Micro-power Micro-power Micro-power Micro-power Micro-power

Diferenciadores clave

  • Combines 12-bit resolution with a 200kSPS sampling rate (frente a ADS7822U)
  • Uses the same compact 8-pin SOIC footprint (frente a ADS7822UBG4)
  • Direct ordering-code continuity for the same converter (frente a ADS7822UC/2K5)
  • Matches the core conversion specifications of the G4 ordering option (frente a ADS7822UC/2K5G4)

Notas de diseño

Place the ADS7822UC close to the analog source and keep AIN0, AIN1, VREF, and the supply return paths short. Connect the manufacturer-recommended bypass capacitors directly to the relevant supply and ground pins. Route SCLK, DIN, and CS away from the analog-input traces to reduce capacitive and inductive coupling. The 8-pin SOIC footprint provides limited escape room, so careful component placement can materially affect measurement repeatability.

Use the serial interface timing and acquisition limits in the manufacturer datasheet when connecting the controller. Begin each transaction with the required chip-select and clock sequence, and ensure the controller does not begin reading until the conversion and serial-transfer timing specified by TI are satisfied. Include digital-interface traces in ground-return planning; a long SCLK route over an interrupted ground plane can introduce timing and noise problems even when the analog section is correctly laid out.

Do not treat the 12-bit resolution as a 12-bit accuracy specification or assume that the 200kSPS headline rate is guaranteed end-to-end throughput. Reference error, source impedance, input settling, acquisition time, and serial transfer all affect the usable measurement result. Confirm the analog input range against VREF and VCC, and verify the complete operating range, temperature grade, package code, and tape-and-reel configuration against the selected manufacturer ordering option.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The verified product information confirms an 8-pin SOIC package and a -40°C to 85°C temperature grade for ADS7822UC/2K5. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified and therefore remain unknown.

Búsquedas relacionadas

ADS7822UC datasheet ADS7822UC pinout ADS7822UC datasheet pdf ADS7822UC specifications ADS7822UC 200kSPS ADC ADS7822UC 2.7V 5.25V Texas Instruments ADS7822UC ADS7822UC 8-SOIC footprint ADS7822UC equivalent ADS7822UC replacement ADS7822UC price ADS7822UC stock ADS7822UC vs ADS7822U ADS7822 sensor measurement application

Componentes & términos relacionados

Texas Instruments ADS7822UC ADS7822U ADS7822UBG4 ADS7822UC/2K5 ADS7822UC/2K5G4 analog-to-digital converter ADC successive-approximation-register ADC SAR ADC data converter semiconductor serial interface 12-bit resolution 200kSPS sampling rate 2.7V to 5.25V supply micro-power ADC 8-pin SOIC SOIC package surface-mount package analog input reference voltage sensor measurement embedded control data acquisition
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ