ADS7822UC - 12-Bit 200kSPS Micro-Power ADC | Texas Instruments
MPN: ADS7822UC ✓ AktifADS7822UC Ringkasan
A sampling ADC, also called a successive-approximation-register ADC or SAR ADC, converts an analog input into a digital code through a sequence of internal comparisons. The ADS7822UC belongs to the ADC data-converter hierarchy within semiconductor signal-chain and data-acquisition systems. Its one-input architecture simplifies analog routing and allows the converter to serve as the central measurement element between sensors, conditioning circuitry, and a microcontroller or embedded processor.
The principal operating specifications are 12-bit resolution, a maximum sampling rate of 200kSPS, and a 2.7V to 5.25V analog and digital supply range. The manufacturer identifies the device as a micro-power part even while operating at the full 200kSPS conversion rate. It is packaged in an 8-pin SOIC, providing a small surface-mount option for boards with limited connector and component space. The serial interface also reduces the number of parallel data lines required between the converter and the controlling digital device.
The SAR architecture is appropriate when each acquisition cycle requires a direct conversion result rather than continuous filtering. The 200kSPS rate provides enough conversion bandwidth for many sensor, potentiometer, and control signals while keeping the converter compact and economical. Because the device accepts a 2.7V minimum supply, it can operate alongside 3.3V system logic, while its 5.25V maximum rating supports 5V-compatible analog and digital environments.
Typical uses include industrial process monitoring, portable measurement instruments, battery-powered sensor nodes, digital potentiometer feedback, and embedded control loops. In a typical system, the analog input is conditioned, sampled by the ADS7822UC, and transferred through its serial interface to a microcontroller. Designers should use the pin-description table and application guidance in the manufacturer datasheet when assigning signal, reference, clock, and logic connections.
Careful layout remains important because the ADC is part of a precision measurement chain. Keep the analog input path short, provide the supply bypassing specified by the manufacturer, and route digital clock and data signals away from sensitive input nodes. The serial interface simplifies synchronization, but the controller must still meet the required clock and conversion timing to obtain consistent results.
This product page combines the verified manufacturer specifications, package information, sourcing guidance, and application-oriented design considerations. It also identifies the closest same-family ordering options and distinguishes them by package, temperature-grade, and ordering-code characteristics so engineers can assess replacement options without treating merely similar ADCs as drop-in substitutes.
Alternatif penggantian untuk ADS7822UC — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian ADS7822UC (sama faktor bentuk dan footprint) — berbeda di dalam Architecture, Supply Voltage Range.
ADS7822U
✅ Drop-InKontak untuk harga
Lihat Datasheet →ADS7822UBG4
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
ADS7822UC/2K5
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
ADS7822UC/2K5G4
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
ADS7822UC Rating Maksimal & Karakteristik Listrik
| Resolusi | 12 bit |
| Laju Pengambilan Sampel | 200 kSPS |
| Input Type | Single-ended analog input |
| Architecture | Successive-approximation-register (SAR) |
| Number of Input Channels | 1 channel |
| Supply Voltage Range | 2.7V to 5.25V |
| Output Interface | Serial |
| Paket | 8-pin SOIC |
| Tipe Mounting | Surface mount |
| Temperature Grade | -40°C to 85°C |
| Power Classification | Micro-power |
| Conversion Rate at Full-Speed Operation | 200 kSPS |
| Analog Input | AIN0 and AIN1 |
| Reference Input | VREF |
| Digital Interface Signals | CS, DIN, and SCLK |
| Package Height | 1.75 mm maximum |
Konfigurasi Pin ADS7822UC
| Pin produk 1 | CS — Active-low chip-select input |
| Pin produk 2 | DIN — Serial data input |
| Pin produk 3 | SCLK — Serial clock input |
| Pin produk 4 | GND — Ground connection |
| Pin produk 5 | AIN0 — Analog input channel 0 |
| Pin produk 6 | AIN1 — Analog input channel 1 |
| Pin produk 7 | VREF — Reference-voltage input |
| Pin produk 8 | VCC — Analog and digital supply input |
Aplikasi Umum
ADS7822UC cocok untuk 6 aplikasis: Industrial Sensor Measurement, Portable Battery-Powered Instrument, Digital Potentiometer Feedback, Embedded Control Acquisition, Data Acquisition and Logging, Precision Analog Monitoring.
Industrial Sensor Measurement
The ADS7822UC fits industrial sensor acquisition because it combines 12-bit resolution with a 200kSPS conversion rate while operating from 2.7V to 5.25V. Place the converter behind the sensor's analog conditioning stage, then use CS, DIN, and SCLK to transfer each conversion to a microcontroller. The 200kSPS capability supports responsive process monitoring without requiring a high-power continuous-conversion ADC. In a 24V industrial system, regulate the analog rail to 5V or 3.3V before the converter and keep the analog trace short. Design the layout around the manufacturer pin configuration and bypass recommendations, since sensor accuracy can be limited by reference noise, input settling, and mixed-signal coupling rather than by converter resolution alone.
Direkomendasikan
Portable Battery-Powered Instrument
The ADS7822UC is suitable for portable instruments because its 200kSPS sampling rate is paired with micro-power operation and a 2.7V minimum supply. A battery-powered meter can operate the ADC from a 3.3V rail, use its single analog input for a conditioned transducer signal, and communicate results over the serial interface. The 12-bit result supports measurements that need more precision than a basic control-ADC input while keeping the converter in an 8-pin SOIC package. Because portable products are sensitive to energy use, enable the converter only during acquisition cycles where the application permits it and avoid leaving the serial interface in a continuously active state. Final battery-life calculations should use the converter's operating and standby currents from the manufacturer datasheet.
Direkomendasikan
Digital Potentiometer Feedback
The ADS7822UC can digitize a wiper or feedback voltage produced by a digital potentiometer in control and calibration systems. Its single input keeps the analog channel count simple, while the 200kSPS rate allows the controller to sample a changing feedback signal quickly enough for closed-loop position or gain measurement. The 12-bit code provides 4096 discrete output levels for a direct unipolar input, making the converter appropriate for proportional feedback rather than precision instrumentation-grade measurement. Place the wiper connection on a short analog trace and use the external reference and supply decoupling shown in the manufacturer application guidance. This arrangement is useful when a microcontroller needs the actual wiper position for calibration, monitoring, or fault detection rather than only the value sent to the pot.
Direkomendasikan
Embedded Control Acquisition
The ADS7822UC provides a dedicated measurement channel for embedded control systems that must observe an analog variable while executing timing-sensitive digital functions. A 200kSPS maximum rate gives the control loop more acquisition opportunities than a slow embedded ADC may provide, and the serial interface keeps the connection to the controller compact. The device accepts a 2.7V to 5.25V supply, allowing it to operate in 3.3V control systems without a separate high-voltage analog rail. Use CS to frame the conversion, DIN for the serial data path, and SCLK for clocking, following the timing limits in the datasheet. Confirm that acquisition latency and control-loop timing remain acceptable for the selected MCU, and do not use the 200kSPS headline rate as a substitute for an end-to-end response-time calculation.
Direkomendasikan
Data Acquisition and Logging
The ADS7822UC is appropriate for compact data-acquisition and logging modules that sample a conditioned analog channel at a controlled rate. Its 12-bit resolution defines the digital result width, while the 200kSPS capability permits bursts of samples for signal monitoring without requiring a high-resolution converter. The serial interface allows the module to connect to a logger or communications processor through a small number of signals, and the 8-pin SOIC package supports dense analog front ends. Engineers should define the required acquisition bandwidth before selecting the operating rate, then account for acquisition time and serial-transfer time when calculating the real sample throughput. Keep clock routing away from the analog input and reference nodes, and verify settling behavior when the source impedance or filter changes between measurement channels.
Direkomendasikan
Precision Analog Monitoring
The ADS7822UC can monitor low-bandwidth analog conditions in instrumentation when the system requires a dedicated 12-bit sampling converter. The 2.7V to 5.25V operating range supports both 3.3V and 5V analog environments, while 200kSPS throughput is more than sufficient for many temperature, level, and position measurements. Route the monitored signal through appropriate conditioning before AIN0 or AIN1 so that the converter receives a voltage within its valid input range. The reference connection and supply bypass network are central to measurement repeatability, so follow the manufacturer's recommended component and layout values. For systems requiring traceable calibration, include offset, gain, and reference errors in the overall accuracy budget rather than attributing all uncertainty to the converter's 12-bit resolution.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk ADS7822UC — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | ADS7822U | ADS7822UBG4 | ADS7822UC/2K5 | ADS7822UC/2K5G4 |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-pin SOIC | 8-pin SOIC - same | 8-pin SOIC - same | 8-pin SOIC - same | 8-pin SOIC - same |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit |
| Sampling Rate | 200 kSPS | 200 kSPS | 200 kSPS | 200 kSPS | 200 kSPS |
| Supply Voltage Range | 2.7V to 5.25V | 2.7V to 5.25V | 2.7V to 5.25V | 2.7V to 5.25V | 2.7V to 5.25V |
| Architecture | Single-input SAR | Single-input SAR | Single-input SAR | Single-input SAR | Single-input SAR |
| Output Interface | Serial | Serial | Serial | Serial | Serial |
| Ordering Configuration | ADS7822UC | ADS7822U ordering code | ADS7822UBG4 ordering code | ADS7822UC with 2K5 reel code | ADS7822UC with 2K5 reel and G4 marking codes |
| Power Classification | Micro-power | Micro-power | Micro-power | Micro-power | Micro-power |
Diferensiator Kunci
- Combines 12-bit resolution with a 200kSPS sampling rate (vsADS7822U)
- Uses the same compact 8-pin SOIC footprint (vsADS7822UBG4)
- Direct ordering-code continuity for the same converter (vsADS7822UC/2K5)
- Matches the core conversion specifications of the G4 ordering option (vsADS7822UC/2K5G4)
Catatan Desain
Place the ADS7822UC close to the analog source and keep AIN0, AIN1, VREF, and the supply return paths short. Connect the manufacturer-recommended bypass capacitors directly to the relevant supply and ground pins. Route SCLK, DIN, and CS away from the analog-input traces to reduce capacitive and inductive coupling. The 8-pin SOIC footprint provides limited escape room, so careful component placement can materially affect measurement repeatability.
Use the serial interface timing and acquisition limits in the manufacturer datasheet when connecting the controller. Begin each transaction with the required chip-select and clock sequence, and ensure the controller does not begin reading until the conversion and serial-transfer timing specified by TI are satisfied. Include digital-interface traces in ground-return planning; a long SCLK route over an interrupted ground plane can introduce timing and noise problems even when the analog section is correctly laid out.
Do not treat the 12-bit resolution as a 12-bit accuracy specification or assume that the 200kSPS headline rate is guaranteed end-to-end throughput. Reference error, source impedance, input settling, acquisition time, and serial transfer all affect the usable measurement result. Confirm the analog input range against VREF and VCC, and verify the complete operating range, temperature grade, package code, and tape-and-reel configuration against the selected manufacturer ordering option.
Informasi Konformitas
The verified product information confirms an 8-pin SOIC package and a -40°C to 85°C temperature grade for ADS7822UC/2K5. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified and therefore remain unknown.