ADS8323Y/2K - 16-Bit 500kSPS SAR ADC | Texas Instruments
N.º de pieza: ADS8323Y/2K ✓ ActivoADS8323Y/2K Descripción general
An SAR ADC is a sampling data-converter category that compares an input voltage against an internal DAC during successive conversion steps. It belongs to the broader analog-to-digital converter, data-converter, and semiconductor hierarchies. Compared with flash and pipeline ADCs, a SAR converter generally combines moderate conversion speed with compact circuitry, deterministic sampling, and a direct parallel digital interface. The ADS8323 is designed for systems that require more precision than a typical 12-bit converter without moving to a substantially higher-speed converter architecture.
Three defining features are its 16-bit resolution, 500 kSPS sampling rate, and internal 2.5 V reference. The pseudo-bipolar input arrangement supports acquisition of bipolar analog signals, while the internal reference reduces the number of external precision components required. The reported 0.0122% linearity error indicates that the converter is suitable for precision measurement systems requiring substantially more resolution than general-purpose instrumentation. Its parallel interface also allows complete 16-bit data to be captured efficiently by suitable digital control logic.
Internally, the ADS8323 uses a capacitor-based 16-bit SAR core with an inherent sample-and-hold function. Conversion is performed through successive comparison steps, after which the selected digital code is presented through the parallel output interface. The manufacturer supports both full 16-bit operation and an 8-bit interface mode in which data are retrieved over two read cycles. This flexibility can simplify bus-width constraints in embedded control systems while retaining access to the converter's full resolution.
Typical uses include industrial process measurement, factory automation, portable instrumentation, embedded sensor acquisition, data acquisition systems, and test and measurement equipment. Its 500 kSPS throughput supports sampling of rapidly changing sensor outputs, while 16-bit resolution preserves low-level analog information. In a complete measurement chain, the ADC can digitize conditioned outputs from pressure, temperature, current, and position sensors.
Designers should preserve the analog input, reference, and digital return paths specified by the manufacturer datasheet. The parallel bus requires adequate signal-integrity margin for the intended clock rate and board topology. Input filtering, acquisition timing, and output settling also determine practical system accuracy and should be evaluated together rather than treating the converter's nominal resolution as the complete measurement accuracy.
This product page combines the device's principal electrical characteristics, interface options, application guidance, and verified drop-in comparisons. It also distinguishes true engineering alternatives from simple reel or packing-code variations, helping designers select a replacement while preserving the TQFP-32 footprint and parallel-interface architecture.
Alternativas directas para ADS8323Y/2K — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
ADS8323Y/2KG4
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ADS8323Y/250
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ADS8323Y/2K Valores máximos y características eléctricas
| Converter Type | Successive approximation register (SAR) |
| Resolución | 16 bit |
| Frecuencia de muestreo | 500 kSPS |
| Number of Input Channels | 1 channel |
| Input Type | Pseudo-bipolar analog input |
| Internal Reference Voltage | 2.5 V |
| Digital Interface | Parallel, 16-bit or 8-bit readout |
| Sample-and-Hold | Inherent |
| Linearity Error | 0.0122% |
| Rango de temperatura de funcionamiento | -40°C to +85°C |
| Encapsulado | TQFP-32, 5 mm x 5 mm |
| Tipo de montaje | Surface mount |
| Process Technology | CMOS |
| Acquisition Mode | Single-channel sampling |
Guía de configuración de pines de ADS8323Y/2K tqfp-32, 5 mm x 5 mm
Configuración de pines para ADS8323Y/2K (encapsulado tqfp-32, 5 mm x 5 mm). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.
No hay datos detallados de patillaje disponibles para ADS8323Y/2K.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
ADS8323Y/2K es adecuado para 6 aplicacións: Industrial Process Measurement, Portable Instrumentation, Factory Automation Control, Embedded Sensor Acquisition, Test and Measurement Equipment, Data Acquisition Systems.
Industrial Process Measurement
The ADS8323Y/2K fits process-control systems that digitize conditioned pressure, flow, level, or position signals at moderate speed. Its 16-bit conversion resolution preserves small analog variations, while the 500 kSPS sampling rate supports rapidly changing process variables. The pseudo-bipolar input can serve sensor-conditioning stages centered around a suitable bipolar range, and the internal 2.5 V reference simplifies the reference architecture. The parallel interface provides direct access to each conversion result for a controller, FPGA, or data-acquisition module. Designers should scale and protect the input to the converter's specified range, control source impedance for the acquisition network, and evaluate filtering against the intended bandwidth rather than relying on nominal ADC resolution alone.
Recomendado
Portable Instrumentation
The ADS8323Y/2K is appropriate for compact laboratory and field instruments that need more than 8-bit measurement resolution without a high-speed flash ADC. A 500 kSPS conversion rate allows multiple readings to be acquired during an observation interval, and the 16-bit parallel output can be read efficiently by an embedded controller. The internal 2.5 V reference reduces the external component count for a portable design, although the complete accuracy budget must still include reference tolerance, analog front-end noise, and temperature effects. The -40°C to +85°C specification supports industrial temperature requirements. Battery-powered implementations should also verify the converter's analog and digital supply requirements and account for the power consumed by both the ADC and its digital interface.
Recomendado
Factory Automation Control
The ADS8323Y/2K can serve as the analog acquisition stage in factory automation equipment that monitors sensors and machine-control analog channels. Its 500 kSPS throughput is suitable for many position, current, and condition-monitoring loops, while 16-bit resolution provides more dynamic range than a basic control ADC. The parallel interface allows deterministic access to a new conversion result through external digital logic, which can simplify integration with legacy PLC or DSP architectures. Signal conditioning must include appropriate filtering and input protection for industrial transients. Layout should separate sensitive analog routing from high-current digital and switching paths, and the converter's acquisition timing should be coordinated with the sensor settling time to avoid capturing incomplete conversions.
Recomendado
Embedded Sensor Acquisition
The ADS8323Y/2K fits embedded acquisition systems for bridge, resistive, or transducer signals that require accurate conversion without the power and complexity of a high-resolution flash converter. Its 500 kSPS sampling capability permits oversampling relative to slower mechanical or thermal signals, while the 16-bit result provides useful resolution for compensation and calibration. The pseudo-bipolar input suits conditioned signals centered around a midpoint rather than unipolar-only signals. In a practical implementation, the sensor amplifier, anti-alias filter, and source impedance must be designed together because they determine whether the converter's nominal resolution remains usable. The 32-pin TQFP package also supports compact assembly, provided the parallel bus is routed with adequate grounding and timing margin.
Recomendado
Test and Measurement Equipment
The ADS8323Y/2K can be used in oscilloscope accessories, waveform digitizers, laboratory meters, and automated test equipment where a deterministic parallel ADC result is useful. At 500 kSPS, the converter handles medium-speed signals while retaining 16-bit nominal resolution. The internal 2.5 V reference helps establish a repeatable conversion baseline, while the selectable full-width or 8-bit read mode provides interface flexibility in systems with limited data capture. Measurement accuracy still depends on analog gain, offset calibration, reference behavior, clock quality, and front-end bandwidth. For instrumentation requiring more than 500 kSPS, the selected receiver and acquisition architecture must confirm that no intermediate stage or bus limitation reduces the effective system throughput.
Recomendado
Data Acquisition Systems
The ADS8323Y/2K is suitable for modular data-acquisition systems that collect sensor or stimulus-response data through a parallel interface. The 16-bit result offers more precision than typical low-resolution acquisition converters, and the 500 kSPS rate supports moderate-bandwidth measurements. Its internal sample-and-hold removes the need for a separate external acquisition switch in basic designs, although source impedance and acquisition time still require attention. A controller or FPGA can capture the parallel output directly, avoiding serial-interface latency. Designers should define the trigger timing, conversion interval, and data-valid handling in the firmware or HDL, then test whether board routing and clock distribution preserve the required timing margin at the highest operating rate.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para ADS8323Y/2K — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | ADS8323Y/2KG4 | ADS8323Y/250 |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | TQFP-32 (5x5 mm) | TQFP-32 (5x5 mm) | TQFP-32 (5x5 mm) |
| Resolution | 16 bit | 16 bit | 16 bit |
| Sampling Rate | 500 kSPS | 500 kSPS | 500 kSPS |
| Converter Architecture | Successive approximation register (SAR) | Successive approximation register (SAR) | Successive approximation register (SAR) |
| Input Type | Pseudo-bipolar | Pseudo-bipolar | Pseudo-bipolar |
| Internal Reference | 2.5 V | 2.5 V | 2.5 V |
| Digital Interface | Parallel, full 16-bit or 8-bit readout | Parallel, full 16-bit or 8-bit readout | Parallel, full 16-bit or 8-bit readout |
Diferenciadores clave
- Matches the documented ADS8323 conversion performance (frente a ADS8323Y/2KG4)
- Preserves the same parallel-interface architecture (frente a ADS8323Y/250)
- Uses an integrated conversion reference (frente a ADS8323Y/2KG4)
Notas de diseño
Route the parallel output as a controlled bus and establish a continuous return path beneath or near the signal traces. The converter supports up to 500 kSPS, so clock, control, and data timing must be checked at the receiver rather than inferred from the nominal conversion rate. Place the receiver close enough to limit loading, and avoid interrupting the output bus with unnecessary series resistance or long stubs.
Follow the manufacturer datasheet's decoupling and grounding layout, placing each required capacitor directly across its associated supply pins. Keep analog input traces short, symmetric, and away from switching-node and high-current return paths. The pseudo-bipolar input network, source impedance, and acquisition timing should be evaluated as one circuit because filter capacitance and switch resistance can affect settling during the sample-and-hold interval.
Do not equate 16-bit nominal resolution with 16-bit effective system accuracy. Front-end offset, gain error, reference behavior, noise, source impedance, and missing codes determine the useful result. Calibrate gain and offset when required, and verify the converter's specified operating modes and supply sequence against the manufacturer datasheet before connecting the parallel bus to a controller or FPGA.
Información de cumplimiento
Compliance information was not stated in the accessible product descriptions; consult the manufacturer datasheet and current TI compliance documentation before production release.