Texas Instruments

ADS8323Y/2K - 16-Bit 500kSPS SAR ADC | Texas Instruments

MPN: ADS8323Y/2K ✓ Active
2.5 V Vdss TQFP-32, 5 mm x 5 mm Package
MOQ: 1 |

ADS8323Y/2K Overview

The Texas Instruments ADS8323Y/2K is a 16-bit, 500 kSPS pseudo-bipolar successive-approximation-register analog-to-digital converter with an internal 2.5 V reference and a 32-pin TQFP package. It supports a full 16-bit parallel interface as well as an 8-bit readout mode using two read cycles. The converter features inherent sample-and-hold, CMOS operation, and a specified temperature range of -40°C to +85°C.

An SAR ADC is a sampling data-converter category that compares an input voltage against an internal DAC during successive conversion steps. It belongs to the broader analog-to-digital converter, data-converter, and semiconductor hierarchies. Compared with flash and pipeline ADCs, a SAR converter generally combines moderate conversion speed with compact circuitry, deterministic sampling, and a direct parallel digital interface. The ADS8323 is designed for systems that require more precision than a typical 12-bit converter without moving to a substantially higher-speed converter architecture.

Three defining features are its 16-bit resolution, 500 kSPS sampling rate, and internal 2.5 V reference. The pseudo-bipolar input arrangement supports acquisition of bipolar analog signals, while the internal reference reduces the number of external precision components required. The reported 0.0122% linearity error indicates that the converter is suitable for precision measurement systems requiring substantially more resolution than general-purpose instrumentation. Its parallel interface also allows complete 16-bit data to be captured efficiently by suitable digital control logic.

Internally, the ADS8323 uses a capacitor-based 16-bit SAR core with an inherent sample-and-hold function. Conversion is performed through successive comparison steps, after which the selected digital code is presented through the parallel output interface. The manufacturer supports both full 16-bit operation and an 8-bit interface mode in which data are retrieved over two read cycles. This flexibility can simplify bus-width constraints in embedded control systems while retaining access to the converter's full resolution.

Typical uses include industrial process measurement, factory automation, portable instrumentation, embedded sensor acquisition, data acquisition systems, and test and measurement equipment. Its 500 kSPS throughput supports sampling of rapidly changing sensor outputs, while 16-bit resolution preserves low-level analog information. In a complete measurement chain, the ADC can digitize conditioned outputs from pressure, temperature, current, and position sensors.

Designers should preserve the analog input, reference, and digital return paths specified by the manufacturer datasheet. The parallel bus requires adequate signal-integrity margin for the intended clock rate and board topology. Input filtering, acquisition timing, and output settling also determine practical system accuracy and should be evaluated together rather than treating the converter's nominal resolution as the complete measurement accuracy.

This product page combines the device's principal electrical characteristics, interface options, application guidance, and verified drop-in comparisons. It also distinguishes true engineering alternatives from simple reel or packing-code variations, helping designers select a replacement while preserving the TQFP-32 footprint and parallel-interface architecture.

Drop-in alternatives for ADS8323Y/2K — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

ADS8323Y/2KG4

✅ Drop-In
📦 TQFP-32 (5x5 mm)
Same 16-bit, 500 kSPS, pseudo-bipolar SAR architecture and TQFP-32 footprint; documented difference is the order suffix only (0% difference in the stated key ratings)

📋 Reference alternative (not in catalog)

ADS8323Y/250

✅ Drop-In
📦 TQFP-32 (5x5 mm)
Same 16-bit, 500 kSPS, pseudo-bipolar SAR architecture and TQFP-32 footprint; order suffix differs by 0% in the stated key ratings

📋 Reference alternative (not in catalog)

ADS8323Y/2K Maximum Ratings & Electrical Characteristics

Converter Type Successive approximation register (SAR)
Resolution 16 bit
Sampling Rate 500 kSPS
Number of Input Channels 1 channel
Input Type Pseudo-bipolar analog input
Internal Reference Voltage 2.5 V
Digital Interface Parallel, 16-bit or 8-bit readout
Sample-and-Hold Inherent
Linearity Error 0.0122%
Operating Temperature Range -40°C to +85°C
Package TQFP-32, 5 mm x 5 mm
Mounting Type Surface mount
Process Technology CMOS
Acquisition Mode Single-channel sampling

ADS8323Y/2K tqfp-32, 5 mm x 5 mm Pin Configuration Guide

Pin configuration for ADS8323Y/2K (tqfp-32, 5 mm x 5 mm package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

tqfp-32, 5 mm x 5 mm package pinout diagram for ADS8323Y/2K

No detailed pinout data available for ADS8323Y/2K.

Refer to the datasheet for full pin configuration.

Typical Applications

ADS8323Y/2K is suitable for 6 applications: Industrial Process Measurement, Portable Instrumentation, Factory Automation Control, Embedded Sensor Acquisition, Test and Measurement Equipment, Data Acquisition Systems.

🏭

Industrial Process Measurement

The ADS8323Y/2K fits process-control systems that digitize conditioned pressure, flow, level, or position signals at moderate speed. Its 16-bit conversion resolution preserves small analog variations, while the 500 kSPS sampling rate supports rapidly changing process variables. The pseudo-bipolar input can serve sensor-conditioning stages centered around a suitable bipolar range, and the internal 2.5 V reference simplifies the reference architecture. The parallel interface provides direct access to each conversion result for a controller, FPGA, or data-acquisition module. Designers should scale and protect the input to the converter's specified range, control source impedance for the acquisition network, and evaluate filtering against the intended bandwidth rather than relying on nominal ADC resolution alone.

🧩

Portable Instrumentation

The ADS8323Y/2K is appropriate for compact laboratory and field instruments that need more than 8-bit measurement resolution without a high-speed flash ADC. A 500 kSPS conversion rate allows multiple readings to be acquired during an observation interval, and the 16-bit parallel output can be read efficiently by an embedded controller. The internal 2.5 V reference reduces the external component count for a portable design, although the complete accuracy budget must still include reference tolerance, analog front-end noise, and temperature effects. The -40°C to +85°C specification supports industrial temperature requirements. Battery-powered implementations should also verify the converter's analog and digital supply requirements and account for the power consumed by both the ADC and its digital interface.

🏭

Factory Automation Control

The ADS8323Y/2K can serve as the analog acquisition stage in factory automation equipment that monitors sensors and machine-control analog channels. Its 500 kSPS throughput is suitable for many position, current, and condition-monitoring loops, while 16-bit resolution provides more dynamic range than a basic control ADC. The parallel interface allows deterministic access to a new conversion result through external digital logic, which can simplify integration with legacy PLC or DSP architectures. Signal conditioning must include appropriate filtering and input protection for industrial transients. Layout should separate sensitive analog routing from high-current digital and switching paths, and the converter's acquisition timing should be coordinated with the sensor settling time to avoid capturing incomplete conversions.

🔧

Embedded Sensor Acquisition

The ADS8323Y/2K fits embedded acquisition systems for bridge, resistive, or transducer signals that require accurate conversion without the power and complexity of a high-resolution flash converter. Its 500 kSPS sampling capability permits oversampling relative to slower mechanical or thermal signals, while the 16-bit result provides useful resolution for compensation and calibration. The pseudo-bipolar input suits conditioned signals centered around a midpoint rather than unipolar-only signals. In a practical implementation, the sensor amplifier, anti-alias filter, and source impedance must be designed together because they determine whether the converter's nominal resolution remains usable. The 32-pin TQFP package also supports compact assembly, provided the parallel bus is routed with adequate grounding and timing margin.

📺

Test and Measurement Equipment

The ADS8323Y/2K can be used in oscilloscope accessories, waveform digitizers, laboratory meters, and automated test equipment where a deterministic parallel ADC result is useful. At 500 kSPS, the converter handles medium-speed signals while retaining 16-bit nominal resolution. The internal 2.5 V reference helps establish a repeatable conversion baseline, while the selectable full-width or 8-bit read mode provides interface flexibility in systems with limited data capture. Measurement accuracy still depends on analog gain, offset calibration, reference behavior, clock quality, and front-end bandwidth. For instrumentation requiring more than 500 kSPS, the selected receiver and acquisition architecture must confirm that no intermediate stage or bus limitation reduces the effective system throughput.

🖥️

Data Acquisition Systems

The ADS8323Y/2K is suitable for modular data-acquisition systems that collect sensor or stimulus-response data through a parallel interface. The 16-bit result offers more precision than typical low-resolution acquisition converters, and the 500 kSPS rate supports moderate-bandwidth measurements. Its internal sample-and-hold removes the need for a separate external acquisition switch in basic designs, although source impedance and acquisition time still require attention. A controller or FPGA can capture the parallel output directly, avoiding serial-interface latency. Designers should define the trigger timing, conversion interval, and data-valid handling in the firmware or HDL, then test whether board routing and clock distribution preserve the required timing margin at the highest operating rate.

What is the ADS8323Y/2K?
The ADS8323Y/2K is a Texas Instruments 16-bit, 500 kSPS, single-channel SAR analog-to-digital converter with a parallel interface and internal 2.5 V reference. According to the TI product page and manufacturer datasheet, it uses a capacitor-based SAR architecture with inherent sample-and-hold and is housed in a TQFP-32 package. The device operates from -40°C to +85°C.
What are the key specifications of ADS8323Y/2K that engineers should know?
The ADS8323Y/2K combines 16-bit resolution, a 500 kSPS sampling rate, pseudo-bipolar input capability, and an internal 2.5 V reference in a 32-pin TQFP package. The Texas Instruments manufacturer datasheet also identifies a parallel digital interface with full 16-bit operation or an 8-bit mode using two read cycles. Its reported linearity error is 0.0122%, while its specified temperature range is -40°C to +85°C.
Where can I download the ADS8323Y/2K datasheet PDF?
The official ADS8323Y/2K technical documentation is available through the Texas Instruments ADS8323 product page and its linked manufacturer datasheet. The product page identifies the converter as a 16-bit, 500 kSPS ADC with an internal 2.5 V reference, inherent sample-and-hold, a full 16-bit interface, an 8-bit read mode, and a TQFP-32 package. Use the manufacturer document for the complete pin description, timing diagram, and electrical characteristics.
Where can I find the ADS8323Y/2K pinout?
The ADS8323Y/2K pin assignment is shown in the Texas Instruments manufacturer datasheet for the ADS8323 family. The device uses a 32-pin TQFP package, so its land pattern requires all 32 numbered positions to be checked against the device-specific pin-description table before PCB routing. Use the pin table rather than assigning functions by analogy with another ADC, particularly for supply, reference, control, and parallel data pins.
What is the conversion architecture of ADS8323Y/2K?
The ADS8323Y/2K uses a 16-bit, capacitor-based successive-approximation-register architecture with inherent sample-and-hold. According to the Texas Instruments product page, this converter supports 500 kSPS operation and presents data through a parallel interface. The SAR architecture makes the converter suitable for deterministic acquisition in industrial, embedded, and precision instrumentation systems.
Can ADS8323Y/2K use an 8-bit interface?
Yes. The ADS8323Y/2K supports an 8-bit option in which the conversion data are read using two read cycles, according to the Texas Instruments product page. This mode can simplify interfacing with a controller whose external data bus is narrower than the converter's full 16-bit output. The manufacturer datasheet should be used to establish the required byte order, control timing, and valid-data behavior.
Is ADS8323Y/2K suitable for industrial sensor measurement?
The ADS8323Y/2K is suitable for many industrial sensor-measurement systems requiring 16-bit resolution at up to 500 kSPS. Its pseudo-bipolar input, internal 2.5 V reference, and -40°C to +85°C specified temperature range support conditioned pressure, temperature, current, and position signals. The complete signal chain must still provide suitable input range, bandwidth, filtering, and grounding to realize the converter's nominal resolution.
What is the difference between ADS8323Y/2K and ADS8323Y/250?
Both listings identify a 16-bit, 500 kSPS ADS8323 in a 32-pin TQFP package, but the order suffixes primarily distinguish the supplied packing configuration rather than the ADC architecture. The ADS8323Y/2K is identified as a reel-packaged part, while ADS8323Y/250 represents another order suffix for the same device family. Because no substantive electrical or pin-function difference is established, this comparison is a packing-code variant rather than a functionally improved alternative.
What can replace the ADS8323Y/2K on an existing PCB?
The closest documented same-brand replacement is the ADS8323Y/2KG4, which retains the ADS8323's 16-bit, 500 kSPS, pseudo-bipolar architecture and TQFP-32 footprint. It is an orderable suffix of the same device rather than a different converter design. The Texas Instruments manufacturer datasheet and product documentation should be checked for any suffix-specific ordering or environmental distinctions before production substitution.
When should I choose ADS8323Y/2K over another 16-bit SAR ADC?
Choose the ADS8323Y/2K when the design specifically benefits from its 500 kSPS SAR conversion rate, 16-bit resolution, internal 2.5 V reference, pseudo-bipolar input, and parallel interface. It is especially appropriate when a 32-pin TQFP layout already exists. Choose another ADC only when its sampling rate, interface, power, reference, accuracy, or package provides a documented advantage for the actual signal chain.
Is ADS8323Y/2K the same as ADS8323Y/2KG4?
The ADS8323Y/2K and ADS8323Y/2KG4 are orderable suffixes of the same Texas Instruments ADS8323 device family, with both listings describing a 16-bit, 500 kSPS pseudo-bipolar SAR ADC. Their shared TQFP-32 package and parallel interface support pin-compatible substitution. The suffix should still be checked against the manufacturer ordering information for qualification, marking, and packing requirements.
Where can I buy ADS8323Y/2K and check its lead time?
Use the Request a Quote form on this page to request ADS8323Y/2K pricing, stock confirmation, minimum order quantity, and current lead time. The form connects the request with XAIPART's procurement workflow for the exact Texas Instruments order code. Because availability and delivery timing can change, request the current configuration and shipment quantity before releasing a production order.
How much does ADS8323Y/2K cost?
The current commercial terms for ADS8323Y/2K are available through the Request a Quote form on this page. The form supports quantity-specific sourcing for the exact 32-pin TQFP order code and avoids presenting a stale catalog amount as current. Include the required shipment quantity, date code preference, and whether reel packaging is acceptable when submitting the request.
Is ADS8323Y/2K in stock?
Current ADS8323Y/2K inventory should be confirmed through the Request a Quote form on this page. The form can establish availability for the exact order code, required quantity, and shipment destination. Since component stock can move rapidly and the tape-and-reel configuration matters for automated assembly, confirm allocation before committing the production schedule.
What is the best ADS8323Y/2K drop-in replacement?
The best documented same-footprint option is the ADS8323Y/2KG4 because it retains the 16-bit, 500 kSPS pseudo-bipolar SAR configuration and TQFP-32 package while remaining a Texas Instruments order suffix. It is rated as a 100% parameter match for the documented architecture. No independently documented cross-brand pin-compatible ADC was identified, so unverified competitors should not be treated as drop-in replacements.
What are the main design considerations for ADS8323Y/2K?
The main ADS8323Y/2K design considerations are analog signal conditioning, acquisition timing, reference behavior, supply decoupling, and parallel-bus integrity. Use the manufacturer datasheet's pin and application guidance to place decoupling components and route the 16-bit bus. At 500 kSPS, board-level settling and conversion timing must be evaluated together so that source impedance, sampling dynamics, and digital switching do not limit usable accuracy.

Engineering reference data for ADS8323Y/2K — comparison, design guidance, and compliance information.

Selection Guide

Choose ADS8323Y/2K for a new 16-bit, 500 kSPS SAR measurement design that uses pseudo-bipolar inputs, a parallel interface, an internal 2.5 V reference, and a 32-pin TQFP footprint. ADS8323Y/2KG4 is the closest documented same-brand suffix when its ordering and qualification conditions meet the project requirements. ADS8323Y/250 preserves the same documented electrical architecture and footprint but represents an order-suffix variation, so it should be selected only after confirming packing and procurement details. No cross-brand part is documented as a verified pin-compatible substitute. For designs requiring more than 500 kSPS, a serial interface, lower power, more channels, or a different input range, choose a different ADC rather than assuming this family is interchangeable.

Comparison with Alternatives

Parameter This Product ADS8323Y/2KG4 ADS8323Y/250
Brand Texas Instruments Texas Instruments Texas Instruments
Package TQFP-32 (5x5 mm) TQFP-32 (5x5 mm) TQFP-32 (5x5 mm)
Resolution 16 bit 16 bit 16 bit
Sampling Rate 500 kSPS 500 kSPS 500 kSPS
Converter Architecture Successive approximation register (SAR) Successive approximation register (SAR) Successive approximation register (SAR)
Input Type Pseudo-bipolar Pseudo-bipolar Pseudo-bipolar
Internal Reference 2.5 V 2.5 V 2.5 V
Digital Interface Parallel, full 16-bit or 8-bit readout Parallel, full 16-bit or 8-bit readout Parallel, full 16-bit or 8-bit readout

Key Differentiators

  • Matches the documented ADS8323 conversion performance (vs ADS8323Y/2KG4)
  • Preserves the same parallel-interface architecture (vs ADS8323Y/250)
  • Uses an integrated conversion reference (vs ADS8323Y/2KG4)

Design Notes

Route the parallel output as a controlled bus and establish a continuous return path beneath or near the signal traces. The converter supports up to 500 kSPS, so clock, control, and data timing must be checked at the receiver rather than inferred from the nominal conversion rate. Place the receiver close enough to limit loading, and avoid interrupting the output bus with unnecessary series resistance or long stubs.

Follow the manufacturer datasheet's decoupling and grounding layout, placing each required capacitor directly across its associated supply pins. Keep analog input traces short, symmetric, and away from switching-node and high-current return paths. The pseudo-bipolar input network, source impedance, and acquisition timing should be evaluated as one circuit because filter capacitance and switch resistance can affect settling during the sample-and-hold interval.

Do not equate 16-bit nominal resolution with 16-bit effective system accuracy. Front-end offset, gain error, reference behavior, noise, source impedance, and missing codes determine the useful result. Calibrate gain and offset when required, and verify the converter's specified operating modes and supply sequence against the manufacturer datasheet before connecting the parallel bus to a controller or FPGA.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

Compliance information was not stated in the accessible product descriptions; consult the manufacturer datasheet and current TI compliance documentation before production release.

Related Searches

ADS8323Y/2K datasheet ADS8323Y/2K pinout ADS8323Y/2K datasheet pdf ADS8323Y/2K equivalent ADS8323Y/2K replacement ADS8323Y/2K cross reference ADS8323Y/2K footprint ADS8323Y/2K price ADS8323Y/2K stock Texas Instruments ADS8323Y/2K ADS8323 16-bit 500kSPS ADC ADS8323Y/2K TQFP-32 pinout

Related Components & Terms

Texas Instruments ADS8323Y/2K ADS8323Y/2KG4 ADS8323Y/250 ADS8323 analog-to-digital converter ADC successive approximation register SAR ADC parallel interface internal reference 2.5 V reference pseudo-bipolar input 16-bit resolution 500 kSPS sampling rate sample-and-hold TQFP-32 surface mount CMOS industrial process measurement data acquisition system precision instrumentation
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details