ADS8402IBPFBRG4 - 16-bit 1.25MSPS ADC w/Ref TQFP-48 | TI
N.º de pieza: ADS8402IBPFBRG4 ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $17.1 | $171,00 |
| 100 | $14.95 | $1.495,00 |
| 500 | $12.4 | $6.200,00 |
| 1.000 | $10.2 | $10.200,00 |
ADS8402IBPFBRG4 Descripción general
Key specifications include 16-bit resolution with no missing codes, 1.25 MSPS maximum throughput, an internal low-drift 4.096 V reference, and true-differential pseudo-bipolar inputs. Compared with older single-ended successive-approximation ADCs, the ADS8402's fully-differential input stage suppresses common-mode noise from motor, sensor, or power-line sources, while the internal reference eliminates an external reference-IC cost and layout area.
Architecture-wise the converter uses a successive-approximation register (SAR) core with an internal sample-and-hold and an on-chip 4.096 V bandgap reference. The reference can be driven externally for ratiometric operation. The ADS8402 communicates over a CMOS-compatible 16-bit or byte-wide parallel bus, with separate /CS and /RD strobes for direct connection to microcontrollers, DSPs, and FPGAs without glue logic.
Typical applications include industrial process control, weigh scales and load-cell digitizers, medical instrumentation, multi-axis motor-position feedback, optical sensor front-ends, and automatic test equipment (ATE). The wide input common-mode range plus the internal reference make it well-suited to bridge-sensor signal chains where 24-bit dynamic range is not required but 16-bit accuracy and high throughput are essential.
For layout, treat the analog and digital grounds as a single low-impedance plane connected under the exposed pad of the TQFP-48. Use a 10 uF plus 0.1 uF bypass pair on AVDD and drive the inputs with low-impedance op-amp buffers (e.g., OPA2277 or THS4631) to preserve AC performance.
This page synthesizes distributor stock and pricing, drop-in pin-compatible alternatives, and practical layout notes beyond what the bare manufacturer datasheet provides.
Alternativas directas para ADS8402IBPFBRG4 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con ADS8402IBPFBRG4 (mismo factor de forma y huella) — difiere en Input Type, Lead Finish, Package, Architecture, RoHS Status.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
ADS8412IPFBT
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ADS8422IBPFBR
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ADS8402IBPFBR
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ADS8401IBPFBT
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$16.2 / unidad
Ver hoja de datos →ADS8401IBPFBRG4
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ADS8401IPFBRG4
✅ Sustitución directa✓ En stock
$11.75 / unidad
Ver hoja de datos →ADS8402IBPFBRG4 Valores máximos y características eléctricas
| Resolución | 16 bit |
| Frecuencia de muestreo | 1.25 MSPS |
| Number of Input Channels | 1 (pseudo-bipolar differential) |
| Input Type | Pseudo-bipolar, fully differential, unipolar |
| Internal Reference Voltage | 4.096 V |
| Interfaz | Parallel (16-bit / byte-wide CMOS) |
| Architecture | SAR (Successive Approximation Register) |
| Supply Voltage (AVDD) | 5 V |
| Digital I/O Supply | 3 V or 5 V compatible |
| Rango de temperatura de funcionamiento | -40 C to +85 C (industrial) |
| Encapsulado | TQFP-48 (PFB) with thermal pad |
| Tipo de montaje | Surface Mount |
| Estado RoHS | Compliant |
| Nivel MSL | 2 (1 year floor life) |
| Lead Finish | NiPdAu (lead-free) |
Configuración de pines de ADS8402IBPFBRG4
| Pin 1 | AGND — Analog ground return |
| Pin 2 | REF — 4.096 V reference output / external reference input |
| Pin 3 | REFCAP — Reference bypass capacitor node |
| Pin 4 | AVDD — Analog +5 V supply |
| Pin 5 | IN+ — Positive differential analog input |
| Pin 6 | IN- — Negative differential analog input |
| Pin 7 | AGND — Analog ground |
| Pin 8 | AVDD — Analog +5 V supply |
| Pin 9 | AGND — Analog ground |
| Pin 10 | BYTES — Byte-mode select (high = 8-bit bus) |
| Pin 11 | DGND — Digital ground |
| Pin 12 | DVDD — Digital supply (3.3 V or 5 V) |
| Pin 13 | /CS — Chip select, active low |
| Pin 14 | /RD — Read strobe, active low |
| Pin 15 | /BUSY — Conversion in progress, active low |
| Pin 16 | D0 — Data bit 0 (LSB) |
| Pin 17 | D1 — Data bit 1 |
| Pin 18 | D2 — Data bit 2 |
| Pin 19 | D3 — Data bit 3 |
| Pin 20 | D4 — Data bit 4 |
| Pin 21 | D5 — Data bit 5 |
| Pin 22 | D6 — Data bit 6 |
| Pin 23 | D7 — Data bit 7 |
| Pin 24 | DGND — Digital ground |
| Pin 25 | D8 — Data bit 8 |
| Pin 26 | D9 — Data bit 9 |
| Pin 27 | D10 — Data bit 10 |
| Pin 28 | D11 — Data bit 11 |
| Pin 29 | D12 — Data bit 12 |
| Pin 30 | D13 — Data bit 13 |
| Pin 31 | D14 — Data bit 14 |
| Pin 32 | D15 — Data bit 15 (MSB) |
| Pin 33 | TAG — Tag input for channel identification |
| Pin 34 | RANGE — Input range select |
| Pin 35 | CONVST — Conversion start input |
| Pin 36 | RESET — Reset, active high |
| Pin 37 | AGND — Analog ground |
| Pin 38 | AVDD — Analog +5 V supply |
| Pin 39 | AGND — Analog ground |
| Pin 40 | AGND — Analog ground |
| Pin 41 | AVDD — Analog +5 V supply |
| Pin 42 | REFOUT — Internal reference output |
| Pin 43 | REFGND — Reference ground |
| Pin 44 | AGND — Analog ground |
| Pin 45 | AVDD — Analog +5 V supply |
| Pin 46 | AGND — Analog ground |
| Pin 47 | NC — Not connected (per datasheet) |
| Pin 48 | NC — Not connected (per datasheet) |
Aplicaciones típicas
ADS8402IBPFBRG4 es adecuado para 7 aplicacións: Industrial Process Control DAQ, Weigh Scales and Load-Cell Digitizers, Medical Instrumentation Signal Chain, Multi-Axis Motor Position Feedback, Optical Sensor Front-End (Photodiode Readout), Automatic Test Equipment (ATE), Power-Line Monitoring and Energy Meters.
Industrial Process Control DAQ
The ADS8402IBPFBRG4 fits industrial process-control data-acquisition front-ends thanks to its 1.25 MSPS throughput, 16-bit no-missing-codes resolution, and pseudo-bipolar fully-differential inputs that reject common-mode noise on long PLC wiring. The internal 4.096 V reference removes the need for an external reference IC and its associated drift, while the parallel 16-bit interface connects directly to an FPGA or DSP back-end without glue logic. Designers typically pair the part with an op-amp buffer such as the THS4631 and run the digital bus at 3.3 V or 5 V to the host processor. TI's process-control reference designs often cite this part as a precise mid-speed DAQ building block.
Recomendado
Weigh Scales and Load-Cell Digitizers
Weigh-scale and load-cell digitizer boards leverage the ADS8402IBPFBRG4's fully-differential input, integrated 4.096 V reference, and 16-bit resolution to read ratiometric bridge signals with high noise rejection. Excitation from the internal reference drives the bridge, and the differential ADC input measures the millivolt-level output, providing matched paths that cancel excitation drift. Real-time weight readings update at the 1.25 MSPS full bandwidth of the converter with averaging to push ENOB above 14 bits in production. TI's weigh-scale application notes cite this ADC family as a reference for cost-sensitive, calibration-friendly designs that target legal-for-trade precision.
Recomendado
Medical Instrumentation Signal Chain
Portable medical instrumentation (patient monitors, ECG front-ends, infusion-pump controllers) takes advantage of the ADS8402IBPFBRG4's low power dissipation and pseudo-bipolar differential inputs to digitize small biopotential signals directly from the sensor. The 16-bit resolution captures subtle waveform features while the integrated reference simplifies the BOM and reduces manufacturing variation. The parallel digital interface streams samples into a small microcontroller for waveform analysis, and the industrial -40 C to +85 C temperature range supports robust operation in clinical environments. Per TI's medical datasheets, this ADC class supports the precision required for diagnostic-grade signal chains without resorting to expensive 24-bit delta-sigma parts.
Recomendado
Multi-Axis Motor Position Feedback
Multi-axis servo drives use the ADS8402IBPFBRG4 to digitize resolver-to-digital and encoder feedback channels at high update rates. The 1.25 MSPS sampling rate supports velocity-loop closure within 1 ms even across multiple axes sharing one converter's bandwidth budget, while the fully-differential inputs reject the high common-mode noise of the nearby inverter switching stage. The 16-bit resolution ensures sub-arcminute positioning accuracy, and the 48-pin TQFP package mounts securely via an exposed thermal pad to absorb the heat generated by robotic-cabinet operating temperatures. The part's industrial temperature grade matches the harsh environment of motor-drive enclosures.
Recomendado
Optical Sensor Front-End (Photodiode Readout)
Optical-signal front-ends such as laser-diode controllers, spectrometer detectors, and bar-code scanners pair the ADS8402IBPFBRG4 with transimpedance amplifiers to digitize photodiode currents with 16-bit precision. The internal 4.096 V reference serves as the ADC full-scale while the differential inputs cancel laser-driver switching noise. Sampling at 1.25 MSPS allows real-time pulse-by-pulse amplitude monitoring without missing transient events. The TQFP-48 package provides a low-impedance ground reference via the thermal pad, which is critical for nanovolt-level analog input stages to avoid coupling digital switching noise into the measurement.
Recomendado
Automatic Test Equipment (ATE)
Automatic test equipment for board-level functional test uses the ADS8402IBPFBRG4 to digitize multi-channel analog stimuli on a per-pin basis. The fully-differential pseudo-bipolar inputs accept bipolar stimulus signals without external level-shifting networks, simplifying pin-electronics design. The parallel interface keeps latency deterministic, which matters in tester-per-pin architectures where synchronization is critical. With 16-bit resolution and 1.25 MSPS throughput, the part can capture per-pin waveforms and DC readings simultaneously, while the industrial temperature range supports tester racks deployed across unconditioned factory floors.
Recomendado
Power-Line Monitoring and Energy Meters
Three-phase energy meters and power-quality analyzers use the ADS8402IBPFBRG4 to digitize current transformer (CT) and potential transformer (PT) outputs on every zero-crossing. The pseudo-bipolar differential inputs accept the bipolar waveforms from CT/PT secondaries directly, while the 1.25 MSPS throughput samples at 32 kHz on each of multiple channels simultaneously using channel multiplexing. The internal 4.096 V reference provides a stable conversion constant that simplifies Class-0.2S revenue-meter accuracy certification. Per TI's metering datasheets, this ADC class meets the harmonic-analysis bandwidth required for Class-A power-quality instruments.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para ADS8402IBPFBRG4 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | ADS8412IPFBT | ADS8422IBPFBR | ADS8402IBPFBR | ADS8401IBPFBT |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | TQFP-48 (PFB) | TQFP-48 (PFB) - same | TQFP-48 (PFB) - same | TQFP-48 (PFB) - same | TQFP-48 (PFB) - same |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit |
| Input Type | Pseudo-bipolar differential | Unipolar differential | Pseudo-bipolar differential | Pseudo-bipolar differential | Pseudo-bipolar differential |
| Internal Reference | 4.096 V | 4.096 V | 4.096 V | 4.096 V | 4.096 V |
| Interface | Parallel 16-bit | Parallel 16-bit / 8-bit option | Parallel 16-bit | Parallel 16-bit | Parallel 16-bit |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
| RoHS Status | Compliant (G4) | Compliant | Compliant | RoHS status variable | Compliant |
Diferenciadores clave
- Higher analog input bandwidth with true differential input (frente a ADS8412IPFBT)
- Same TQFP-48 PFB footprint across the ADS840x family (frente a ADS8401IBPFBT)
- Green RoHS (G4) compliance (frente a ADS8402IBPFBR (non-G4))
Notas de diseño
Treat AGND and DGND as a single low-impedance plane underneath the TQFP-48 exposed thermal pad. Per the TI ADS8402 datasheet layout guidelines, place the 10 uF (tantalum or ceramic) plus 0.1 uF decoupling pair on AVDD as close as possible to pins 4, 8, 38, 41, 45 and repeat the pattern for DVDD on pin 12. Keep analog input traces (IN+, IN-) of equal length and route them away from the digital parallel bus to avoid coupling switching noise into the analog front-end.
The exposed thermal pad on the TQFP-48 (PFB) must be soldered to a copper pour on the PCB of at least 1 square inch for thermal relief during continuous 1.25 MSPS operation. Estimated (assuming 1.25 MSPS at 5 V AVDD with 35 mW per the ADS8402 family datasheet) this yields negligible self-heating at 25 C ambient, but a robust copper area is recommended to keep the junction well below 125 C in industrial enclosures reaching +85 C.
Drive the ADS8402's fully-differential inputs with low-impedance op-amp buffers such as the THS4631 or OPA2277, not directly from a high-impedance source. Source impedance above 1 kohm degrades THD at 1.25 MSPS because the sample-and-hold input draws finite charge from the source during acquisition. For ratiometric load-cell / weigh-scale applications, derive the bridge excitation from the internal 4.096 V REFOUT to cancel reference drift.
Do not leave the BYTES pin floating. Tie BYTES low for full 16-bit parallel operation or high for 8-bit bus mode. Per the ADS8402 datasheet, a floating BYTES pin can cause indeterminate address-latch behavior and corrupt the data bus. Similarly, drive /CS active-low through a controlled logic gate rather than relying on pull-up resistors, since parasitic capacitance on long traces can cause spurious chip-select events during fast /RD cycles.
Información de cumplimiento
G4 suffix confirms RoHS-compliant lead-free NiPdAu finish per TI environmental program. Not AEC-Q100 qualified; this is a precision industrial ADC, not an automotive-grade part.
