AK4114VQ - 192kHz 24-Bit Digital Audio Interface | AKM
N.º de pieza: AK4114VQ ✓ ActivoAK4114VQ Descripción general
A digital audio interface transceiver converts between serial digital audio and internal data formats while decoding the metadata carried within the audio stream. In the digital-audio hierarchy, the AK4114 sits between a source such as a DVD player, game console, broadcast receiver, or professional audio interface and a subsequent audio codec or signal-chain stage. Its interface handling is especially useful in home-theater and surround-sound equipment, where consumer-format AC-3 streams and professional digital-audio metadata must be recognized reliably.
The AK4114 supports operation up to 192 kHz with 24-bit resolution. According to the manufacturer datasheet, its channel-status decoder handles both consumer and professional modes, while automatic non-PCM detection identifies streams that require handling outside ordinary PCM audio decoding. Sampling-frequency detection can use either clock comparison against the crystal oscillator or sampling-frequency information contained in channel status; these methods are selected through the XTL1,0 control bits.
For AC-3 system designs, the manufacturer describes combining the AK4114 with the AK4527B or AK4529 multichannel audio codec. The AK4114 provides interface recognition and channel-status decoding, while the companion codec performs the associated multichannel audio conversion. Dedicated configuration pins and a serial microprocessor interface provide additional control options for integrating the transceiver into system-specific control schemes.
Typical uses include DVD and Blu-ray disc player audio interfaces, surround-sound home-theater receivers, game consoles, broadcast and professional audio equipment, and AC-3 decoder subsystems. Design the PCB with short, controlled clock and data routes, provide a stable crystal reference, and use the pin-function table in the manufacturer datasheet when assigning tracks. Confirm that the selected companion codec supports the required sample rate, channel format, and metadata mode before finalizing the system architecture.
Alternativas directas para AK4114VQ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
AK4114VQ-E
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
AK4114
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
AK4114VQ Especificaciones
| Product Type | Digital audio interface transceiver |
| Maximum Sampling Frequency | 192 kHz |
| Audio Data Resolution | 24 bit |
| Channel Status Modes | Consumer and professional |
| Non-PCM Detection | Automatic |
| Supported Stream | AC-3 |
| Encapsulado | 48-LQFP |
| Recuento de pines | 48 pins |
| Sampling Frequency Detection Method 1 | Clock comparison against the X'tal oscillator |
| Sampling Frequency Detection Method 2 | Sampling-frequency information in channel status |
| Detection Mode Selection | XTL1,0 bits |
| Detected Sampling Frequency Output | FS3-0 bits |
| Control Interface | Dedicated pins and serial microprocessor interface |
| Recommended Companion Codec | AK4527B or AK4529 |
| Manufacturer Datasheet Reference | MS0098-E-042004/03 |
| Datasheet Length | 48 pages |
| Datasheet File Size | 450 kbytes |
Guía de configuración de pines de AK4114VQ 48-lqfp
Configuración de pines para AK4114VQ (encapsulado 48-lqfp). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para AK4114VQ.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
AK4114VQ es adecuado para 6 aplicacións: AC-3 Home-Theater Receiver Interface, DVD and Blu-Ray Disc Player Audio Input, Professional and Broadcast Digital Audio Interface, Game Console and Media Hub Audio Receiver, Automotive Infotainment Audio Interface, Digital Audio Interface Evaluation Platform.
AC-3 Home-Theater Receiver Interface
The AK4114VQ fits the digital-audio input stage of a surround-sound home-theater receiver that receives consumer-format AC-3 or conventional PCM streams. Its 192 kHz, 24-bit interface capability accommodates high-rate digital audio, while automatic non-PCM detection identifies streams that are not ordinary PCM. The XTL1,0-selected clock-comparison and channel-status methods provide two ways to establish the source rate, with the result reported through FS3-0. Pair the interface with the AK4527B or AK4529 when multichannel decoding is required, and validate the complete digital path against the source player and output amplifier architecture.
Recomendado
DVD and Blu-Ray Disc Player Audio Input
The AK4114VQ is appropriate for the digital-audio interface of a disc player or media receiver that must recognize both consumer and professional channel-status information. Supporting sampling rates up to 192 kHz and data resolution up to 24 bits covers high-quality digital audio streams, while non-PCM detection helps the system controller identify encoded content that needs special handling. Use the recovered-clock comparison method when the source clock relationship is predictable, or select channel-status-based detection when metadata carries the rate. The companion codec and output stage should be selected to match the player’s channel count and supported stream formats.
Recomendado
Professional and Broadcast Digital Audio Interface
The AK4114VQ suits equipment that must receive professional digital-audio streams and interpret their embedded metadata. Professional channel-status decoding complements the 192 kHz maximum sampling rate and 24-bit resolution, allowing the interface to handle high-rate studio or broadcast sources without reducing the stream to a basic PCM-only receiver function. Sampling-frequency detection through either clock comparison or channel status gives the system two identification paths for different source conditions. Confirm clock topology, jitter expectations, grounding, and channel mapping against the applicable equipment specification, then pair the interface with a codec that supports the required professional operating mode.
Recomendado
Game Console and Media Hub Audio Receiver
The AK4114VQ can serve as the digital-audio receiver in a game console, set-top box, or media hub that accepts encoded surround-sound content alongside PCM audio. Automatic non-PCM detection allows the host controller to distinguish special bitstreams, and the FS3-0 reporting outputs make the detected sample rate available to system logic. The consumer-mode channel-status decoder supports the metadata typically encountered in consumer entertainment equipment. Keep the digital traces short, provide a stable crystal reference, and connect the AK4114 to the AK4527B or AK4529 when the design requires multichannel DAC conversion.
Recomendado
Automotive Infotainment Audio Interface
The AK4114VQ can be evaluated for infotainment and vehicle audio subsystems that receive digital-audio streams with consumer or professional metadata. Its support for up to 192 kHz and 24-bit data accommodates high-resolution source formats, while automatic non-PCM detection helps the vehicle controller route encoded streams correctly. The two sampling-frequency detection methods allow the design to use the recovered clock, channel-status metadata, or a configuration matched to the source device. Automotive qualification, EMC performance, and operating-temperature requirements must be confirmed separately for the finished system rather than inferred from the interface function alone.
Recomendado
Digital Audio Interface Evaluation Platform
The AK4114VQ is useful in an audio-interface development platform where engineers need to observe recovered clocks, channel-status behavior, non-PCM detection, and sampling-frequency identification in a repeatable test setup. Its dedicated configuration pins and serial microprocessor interface permit control of operating modes from a host controller, while the 48-LQFP package provides a manageable surface-mount assembly for prototype boards. Use the datasheet application circuit as the starting point, preserve the recommended clock and grounding topology, and bring the AK4527B or AK4529 into the same evaluation when multichannel audio reconstruction is part of the test objective.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para AK4114VQ — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | AK4114VQ-E | AK4114 |
|---|---|---|---|
| Brand | Asahi Kasei Microdevices/AKM | Asahi Kasei Microdevices/AKM | Asahi Kasei Microdevices/AKM |
| Package | 48-LQFP | 48-LQFP | 48-LQFP |
| Maximum Sampling Frequency | 192 kHz | 192 kHz | 192 kHz |
| Audio Data Resolution | 24 bit | 24 bit | 24 bit |
| Channel Status Modes | Consumer and professional | Consumer and professional | Consumer and professional |
| Non-PCM Detection | Automatic | Automatic | Automatic |
| Sampling Frequency Detection | Recovered-clock comparison or channel-status information | Recovered-clock comparison or channel-status information | Recovered-clock comparison or channel-status information |
| Detection Mode Control | XTL1,0 bits | XTL1,0 bits | XTL1,0 bits |
| Detected Frequency Reporting | FS3-0 bits | FS3-0 bits | FS3-0 bits |
| AC-3 Companion Codec | AK4527B or AK4529 | AK4527B or AK4529 | AK4527B or AK4529 |
Diferenciadores clave
- Higher maximum sampling rate and resolution than a basic PCM receiver (frente a AK4114)
- Two independent sampling-frequency identification methods (frente a AK4114VQ-E)
- Defined multichannel AC-3 integration path (frente a AK4114)
Notas de diseño
Use the manufacturer application circuit as the baseline for the AK4114VQ clock, digital-audio, control, and power connections. Keep the crystal oscillator and its associated components close to the device, and route the recovered clock and serial audio nets away from switching-node and high-current supply paths. Differential-style signals should preserve the geometry and reference plane shown in the datasheet so that clock and data timing margins are not reduced by uncontrolled impedance changes.
Treat the recovered clock as a timing-critical net because it participates in sample-frequency identification. Route it as a short, continuous path without stubs or test-probe landing areas where avoidable, and keep the associated data nets similarly controlled. The two sampling-frequency detection methods operate on different information sources: one compares the recovered clock with the crystal reference, while the other reads channel-status data. Validate both paths across the supported source formats to avoid an incorrect FS3-0 rate report.
Do not assume that automatic non-PCM detection replaces an audio-format decision in the host controller. The AK4114VQ identifies the presence of a non-PCM bitstream and reports sampling-frequency information, but the system still has to select an appropriate decoding path and companion codec. Also confirm that the selected AK4527B or AK4529 configuration supports the incoming sample rate, channel count, and consumer or professional operating mode before releasing the PCB.
Información de cumplimiento
The available manufacturer and distributor pages do not state the individual compliance attributes. AEC-Q100 is not applicable because the AK4114VQ is an audio interface transceiver rather than an automotive-qualified device.