AKM

AK4114VQ - 192kHz 24-Bit Digital Audio Interface | AKM

部品番号: AK4114VQ ✓ 生産中
48-LQFP Package 192 kHz Speed
MOQ: 1 |

AK4114VQ 概要

The Asahi Kasei Microdevices AK4114VQ is a high-feature digital audio interface transceiver supporting 192 kHz sampling and 24-bit audio data in a 48-LQFP package. It decodes digital audio channel status in both consumer and professional modes and automatically detects non-PCM bitstreams. The device also identifies the recovered sampling frequency and reports it through dedicated FS3-0 output bits.

A digital audio interface transceiver converts between serial digital audio and internal data formats while decoding the metadata carried within the audio stream. In the digital-audio hierarchy, the AK4114 sits between a source such as a DVD player, game console, broadcast receiver, or professional audio interface and a subsequent audio codec or signal-chain stage. Its interface handling is especially useful in home-theater and surround-sound equipment, where consumer-format AC-3 streams and professional digital-audio metadata must be recognized reliably.

The AK4114 supports operation up to 192 kHz with 24-bit resolution. According to the manufacturer datasheet, its channel-status decoder handles both consumer and professional modes, while automatic non-PCM detection identifies streams that require handling outside ordinary PCM audio decoding. Sampling-frequency detection can use either clock comparison against the crystal oscillator or sampling-frequency information contained in channel status; these methods are selected through the XTL1,0 control bits.

For AC-3 system designs, the manufacturer describes combining the AK4114 with the AK4527B or AK4529 multichannel audio codec. The AK4114 provides interface recognition and channel-status decoding, while the companion codec performs the associated multichannel audio conversion. Dedicated configuration pins and a serial microprocessor interface provide additional control options for integrating the transceiver into system-specific control schemes.

Typical uses include DVD and Blu-ray disc player audio interfaces, surround-sound home-theater receivers, game consoles, broadcast and professional audio equipment, and AC-3 decoder subsystems. Design the PCB with short, controlled clock and data routes, provide a stable crystal reference, and use the pin-function table in the manufacturer datasheet when assigning tracks. Confirm that the selected companion codec supports the required sample rate, channel format, and metadata mode before finalizing the system architecture.

ドロップイン代替品: AK4114VQ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

AK4114VQ-E

✅ ドロップイン ⚠️ 仕様未検証
📦 48-LQFP
Same AK4114 family, 48-pin package, and core 192 kHz/24-bit interface ratings; ordering suffix differs by 0% in the key interface parameters

📋 参考代替品(カタログ未掲載)

AK4114

✅ ドロップイン ⚠️ 仕様未検証
📦 48-LQFP
Same AK4114 device family and 192 kHz/24-bit ratings; base family designation omits the VQ order suffix, with 0% difference in the stated key interface parameters

📋 参考代替品(カタログ未掲載)

AK4114VQ 仕様

Product Type Digital audio interface transceiver
Maximum Sampling Frequency 192 kHz
Audio Data Resolution 24 bit
Channel Status Modes Consumer and professional
Non-PCM Detection Automatic
Supported Stream AC-3
パッケージ 48-LQFP
ピン数 48 pins
Sampling Frequency Detection Method 1 Clock comparison against the X'tal oscillator
Sampling Frequency Detection Method 2 Sampling-frequency information in channel status
Detection Mode Selection XTL1,0 bits
Detected Sampling Frequency Output FS3-0 bits
Control Interface Dedicated pins and serial microprocessor interface
Recommended Companion Codec AK4527B or AK4529
Manufacturer Datasheet Reference MS0098-E-042004/03
Datasheet Length 48 pages
Datasheet File Size 450 kbytes

AK4114VQ 48-lqfp ピン配置ガイド

AK4114VQ (48-lqfp パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

AK4114VQ の 48-lqfp パッケージピン配置図

詳細なピン配置データはありません: AK4114VQ.

詳細は データシート をご参照ください。

主な用途

AK4114VQ の用途: 6 件s: AC-3 Home-Theater Receiver Interface, DVD and Blu-Ray Disc Player Audio Input, Professional and Broadcast Digital Audio Interface, Game Console and Media Hub Audio Receiver, Automotive Infotainment Audio Interface, Digital Audio Interface Evaluation Platform.

🎧

AC-3 Home-Theater Receiver Interface

The AK4114VQ fits the digital-audio input stage of a surround-sound home-theater receiver that receives consumer-format AC-3 or conventional PCM streams. Its 192 kHz, 24-bit interface capability accommodates high-rate digital audio, while automatic non-PCM detection identifies streams that are not ordinary PCM. The XTL1,0-selected clock-comparison and channel-status methods provide two ways to establish the source rate, with the result reported through FS3-0. Pair the interface with the AK4527B or AK4529 when multichannel decoding is required, and validate the complete digital path against the source player and output amplifier architecture.

📺

DVD and Blu-Ray Disc Player Audio Input

The AK4114VQ is appropriate for the digital-audio interface of a disc player or media receiver that must recognize both consumer and professional channel-status information. Supporting sampling rates up to 192 kHz and data resolution up to 24 bits covers high-quality digital audio streams, while non-PCM detection helps the system controller identify encoded content that needs special handling. Use the recovered-clock comparison method when the source clock relationship is predictable, or select channel-status-based detection when metadata carries the rate. The companion codec and output stage should be selected to match the player’s channel count and supported stream formats.

🌐

Professional and Broadcast Digital Audio Interface

The AK4114VQ suits equipment that must receive professional digital-audio streams and interpret their embedded metadata. Professional channel-status decoding complements the 192 kHz maximum sampling rate and 24-bit resolution, allowing the interface to handle high-rate studio or broadcast sources without reducing the stream to a basic PCM-only receiver function. Sampling-frequency detection through either clock comparison or channel status gives the system two identification paths for different source conditions. Confirm clock topology, jitter expectations, grounding, and channel mapping against the applicable equipment specification, then pair the interface with a codec that supports the required professional operating mode.

🖥️

Game Console and Media Hub Audio Receiver

The AK4114VQ can serve as the digital-audio receiver in a game console, set-top box, or media hub that accepts encoded surround-sound content alongside PCM audio. Automatic non-PCM detection allows the host controller to distinguish special bitstreams, and the FS3-0 reporting outputs make the detected sample rate available to system logic. The consumer-mode channel-status decoder supports the metadata typically encountered in consumer entertainment equipment. Keep the digital traces short, provide a stable crystal reference, and connect the AK4114 to the AK4527B or AK4529 when the design requires multichannel DAC conversion.

🚗

Automotive Infotainment Audio Interface

The AK4114VQ can be evaluated for infotainment and vehicle audio subsystems that receive digital-audio streams with consumer or professional metadata. Its support for up to 192 kHz and 24-bit data accommodates high-resolution source formats, while automatic non-PCM detection helps the vehicle controller route encoded streams correctly. The two sampling-frequency detection methods allow the design to use the recovered clock, channel-status metadata, or a configuration matched to the source device. Automotive qualification, EMC performance, and operating-temperature requirements must be confirmed separately for the finished system rather than inferred from the interface function alone.

🔧

Digital Audio Interface Evaluation Platform

The AK4114VQ is useful in an audio-interface development platform where engineers need to observe recovered clocks, channel-status behavior, non-PCM detection, and sampling-frequency identification in a repeatable test setup. Its dedicated configuration pins and serial microprocessor interface permit control of operating modes from a host controller, while the 48-LQFP package provides a manageable surface-mount assembly for prototype boards. Use the datasheet application circuit as the starting point, preserve the recommended clock and grounding topology, and bring the AK4527B or AK4529 into the same evaluation when multichannel audio reconstruction is part of the test objective.

おすすめ製品の概要

AK4527B Multichannel companion codec identified for AC-3 system solutions 使用用途: AC-3 Home-Theater Receiver Interface, DVD and Blu-Ray Disc Player Audio Input, Professional and Broadcast Digital Audio Interface, Game Console and Media Hub Audio Receiver, Automotive Infotainment Audio Interface, Digital Audio Interface Evaluation Platform AK4529 Multichannel companion codec identified for AC-3 system solutions 使用用途: AC-3 Home-Theater Receiver Interface, DVD and Blu-Ray Disc Player Audio Input, Professional and Broadcast Digital Audio Interface, Game Console and Media Hub Audio Receiver, Automotive Infotainment Audio Interface, Digital Audio Interface Evaluation Platform
What is the AK4114VQ and what does it do?
The AK4114VQ is a digital audio interface transceiver that supports 192 kHz sampling rates and 24-bit audio data. According to the manufacturer datasheet MS0098-E-042004/03, it decodes channel status in consumer and professional modes, automatically detects non-PCM bitstreams, and identifies the recovered sampling frequency. It is intended for digital-audio input and interface-conversion stages in home-theater, broadcast, and professional audio equipment.
Where can I download the AK4114VQ datasheet PDF?
The AK4114VQ manufacturer datasheet PDF is available through the AKM document link listed on this page, and a 48-page copy is also hosted by DigiKey. The document reference printed in the datasheet is MS0098-E-042004/03. Use the manufacturer document for the authoritative pin-function table, electrical characteristics, application circuit, and configuration details when completing a PCB design.
Where can I find the AK4114VQ pinout?
The AK4114VQ pinout is documented in the pin and function table on page 4 of the 48-page manufacturer datasheet. The device is packaged in a 48-LQFP package, so the complete physical pin assignment should be transcribed directly from that table. Use the exact signal names and power-pin assignments shown in the datasheet rather than inferring connections from similarly named audio-interface devices.
How does the AK4114VQ detect the sampling frequency?
The AK4114VQ detects sampling frequency by either comparing the recovered clock with its crystal oscillator or reading sampling-frequency information carried in channel status. According to the manufacturer datasheet, the XTL1,0 bits select between these two methods. The detected frequency is then reported through the FS3-0 bits, allowing the host processor or system controller to identify the incoming stream rate.
What audio formats does the AK4114VQ support?
The AK4114VQ supports 192 kHz, 24-bit digital audio streams and can decode both consumer and professional channel-status formats. It also automatically detects a non-PCM bitstream. The manufacturer specifically describes pairing the device with the AK4527B or AK4529 multichannel codec for AC-3 system solutions, where the AK4114 handles the interface and stream recognition functions.
Which codec should be used with the AK4114VQ for AC-3?
The manufacturer identifies the AK4527B and AK4529 as companion multichannel codecs for AC-3 designs using the AK4114. The division of responsibility matters: the AK4114 handles digital-interface reception, channel-status decoding, non-PCM recognition, and sampling-frequency detection, while the selected codec performs multichannel audio conversion. Confirm channel count and operating-mode requirements against the companion codec datasheet before layout release.
Can the AK4114VQ be used in a DVD or Blu-ray disc player?
Yes, the AK4114VQ is suitable for digital-audio reception in DVD and Blu-ray disc players and in associated home-theater receivers. Its support for consumer and professional channel status, automatic non-PCM detection, and sampling-frequency reporting covers common source-interface requirements. The device should still be validated against the specific player output format, electrical interface, and companion audio codec selected for the design.
What are the key specifications engineers should know about the AK4114VQ?
The AK4114VQ supports sampling rates up to 192 kHz and audio data up to 24 bits, with both consumer and professional channel-status decoding. It automatically detects non-PCM streams and offers two sampling-frequency detection methods selected by XTL1,0. The device is offered in a 48-LQFP package and is documented in the 48-page MS0098-E-042004/03 manufacturer datasheet.
How do I configure the AK4114VQ sampling-frequency detection?
The sampling-frequency configuration is controlled through the XTL1,0 bits. A setting selects clock comparison between the recovered clock and the crystal oscillator, while the other uses sampling-frequency information carried in channel status. The manufacturer identifies the resulting detected rate through FS3-0. Review the control-logic table in the datasheet to align the setting with the incoming source and system-control scheme.
What can replace the AK4114VQ?
The closest same-family replacement is the AK4114VQ-E order variant, which uses the same AK4114 device family and 48-LQFP footprint. No distinct cross-brand, pin-compatible replacement is established by the available cross-reference results, so the AK4114VQ-E should not be treated as interchangeable with a different manufacturer's audio transceiver without a full electrical and pin-function review. Request a Quote for availability of the exact suffix.
Is the AK4114VQ-E a drop-in replacement for the AK4114VQ?
The AK4114VQ-E is the closest same-family drop-in candidate because it retains the AK4114 function set and 48-LQFP package family. Its ordering suffix differs from the AK4114VQ, so lead-finish and order-code details should still be confirmed with the manufacturer. The available cross-reference results do not establish a cross-brand drop-in equivalent, making the same-family variant the safest replacement candidate.
When should I choose the AK4114VQ instead of a basic digital audio interface receiver?
Choose the AK4114VQ when the design needs 192 kHz operation, 24-bit data, consumer and professional channel-status decoding, automatic non-PCM detection, and explicit sampling-frequency reporting. A basic digital audio receiver may suit simpler PCM-only links, but it may not provide the same metadata handling or AC-3 system integration. Select the companion codec and verify its capabilities alongside the AK4114.
Is the AK4114VQ suitable for professional audio equipment?
Yes, the AK4114VQ supports professional channel-status decoding in addition to consumer mode. It also handles non-PCM detection and provides sampling-frequency identification, which makes it appropriate for professional and broadcast audio interfaces that require metadata awareness. Equipment-level compliance still depends on the complete signal path, clocking implementation, companion codec, and applicable system specifications.
How should the AK4114VQ clock and digital audio traces be laid out?
Route the recovered clock and digital audio signals as short, controlled-impedance paths, and keep the crystal oscillator close to its assigned pins. Use the manufacturer's pin-function table and application circuit to identify the required connections, and avoid routing high-current or switching-regulator traces beneath sensitive audio and clock nets. Ground-return planning should be performed together with the companion codec layout.
Where can I buy the AK4114VQ and check its lead time?
Use the Request a Quote form on this page to request a current quote, stock confirmation, minimum order quantity, and lead time for the exact AK4114VQ order code. Because availability can change with market conditions, request the manufacturing suffix, package, and quantity at the same time. The manufacturer and distributor listings linked in the data sources provide additional documentation for part identification.

エンジニアリング参考データ: AK4114VQ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the AK4114VQ when the product must receive digital audio at rates up to 192 kHz and 24-bit resolution, decode consumer or professional channel status, detect non-PCM streams, and report the detected sampling frequency. It is particularly suitable for DVD, Blu-ray, home-theater, game-console, broadcast, and professional audio products that need a defined path to AK4527B or AK4529 multichannel codecs. The AK4114VQ-E is the closest same-family ordering candidate for new sourcing and can be preferred when its exact suffix and availability meet the production plan. The AK4114 base family designation is useful for technical comparison but should be resolved to a specific orderable suffix before procurement. Neither candidate should be treated as a generic cross-brand substitute; no distinct cross-brand pin-compatible equivalent was established. For designs that only require simple PCM reception without metadata decoding, non-PCM detection, or dual sampling-frequency detection, a simpler audio-interface receiver may reduce complexity.

代替品との比較

パラメータ この製品 AK4114VQ-E AK4114
Brand Asahi Kasei Microdevices/AKM Asahi Kasei Microdevices/AKM Asahi Kasei Microdevices/AKM
Package 48-LQFP 48-LQFP 48-LQFP
Maximum Sampling Frequency 192 kHz 192 kHz 192 kHz
Audio Data Resolution 24 bit 24 bit 24 bit
Channel Status Modes Consumer and professional Consumer and professional Consumer and professional
Non-PCM Detection Automatic Automatic Automatic
Sampling Frequency Detection Recovered-clock comparison or channel-status information Recovered-clock comparison or channel-status information Recovered-clock comparison or channel-status information
Detection Mode Control XTL1,0 bits XTL1,0 bits XTL1,0 bits
Detected Frequency Reporting FS3-0 bits FS3-0 bits FS3-0 bits
AC-3 Companion Codec AK4527B or AK4529 AK4527B or AK4529 AK4527B or AK4529

主な差別化要因

  • Higher maximum sampling rate and resolution than a basic PCM receiver (vs AK4114)
  • Two independent sampling-frequency identification methods (vs AK4114VQ-E)
  • Defined multichannel AC-3 integration path (vs AK4114)

設計ノート

Use the manufacturer application circuit as the baseline for the AK4114VQ clock, digital-audio, control, and power connections. Keep the crystal oscillator and its associated components close to the device, and route the recovered clock and serial audio nets away from switching-node and high-current supply paths. Differential-style signals should preserve the geometry and reference plane shown in the datasheet so that clock and data timing margins are not reduced by uncontrolled impedance changes.

Treat the recovered clock as a timing-critical net because it participates in sample-frequency identification. Route it as a short, continuous path without stubs or test-probe landing areas where avoidable, and keep the associated data nets similarly controlled. The two sampling-frequency detection methods operate on different information sources: one compares the recovered clock with the crystal reference, while the other reads channel-status data. Validate both paths across the supported source formats to avoid an incorrect FS3-0 rate report.

Do not assume that automatic non-PCM detection replaces an audio-format decision in the host controller. The AK4114VQ identifies the presence of a non-PCM bitstream and reports sampling-frequency information, but the system still has to select an appropriate decoding path and companion codec. Also confirm that the selected AK4527B or AK4529 configuration supports the incoming sample rate, channel count, and consumer or professional operating mode before releasing the PCB.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The available manufacturer and distributor pages do not state the individual compliance attributes. AEC-Q100 is not applicable because the AK4114VQ is an audio interface transceiver rather than an automotive-qualified device.

データ検証日: 2026-11-16 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

ak4114vq datasheet AK4114VQ datasheet PDF AK4114VQ pinout AK4114VQ 48-LQFP pinout AK4114 192kHz 24bit transceiver AK4114 channel status decoder AK4114 non-PCM detection AK4114 XTL1,0 sampling frequency detection AK4114 AC-3 receiver circuit AK4114 DVD Blu-ray audio interface AK4114 home theater receiver IC AK4114VQ equivalent AK4114VQ drop-in replacement AK4114VQ price and availability

関連部品&用語

Asahi Kasei Microdevices AKM Semiconductor AK4114VQ AK4114VQ-E AK4114 AK4527B AK4529 digital audio interface transceiver digital audio interface audio codec interface IC semiconductor AC-3 PCM audio non-PCM bitstream detection channel status decoder consumer mode professional mode sampling frequency detection recovered clock crystal oscillator XTL1,0 control bits FS3-0 status bits 48-LQFP
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示