APA075-PQ208A - 75K Gate Flash FPGA | Microchip Technology
N.º de pieza: APA075-PQ208A ✓ ActivoAPA075-PQ208A Descripción general
A ProASICPLUS FPGA is a nonvolatile field-programmable gate array within the broader FPGA and CPLD category. Unlike SRAM-based programmable logic, flash-based ProASICPLUS devices retain their programmed configuration when power is removed. This makes them useful in industrial control, communications, instrumentation, embedded systems, and ASIC prototyping where predictable power-up behavior and compact implementation are important. The APA075 device provides a transition from fixed-function ASIC logic to field-updatable hardware without requiring a separate configuration loader.
Key characteristics of the APA075-PQ208A include 75,000 equivalent gates, 180 MHz maximum clock frequency, 158 I/O pins, nonvolatile flash technology, and a 208-BFQFP package. The device is programmable and nonvolatile, and the ProASICPLUS family supports an ASIC design flow. These features make it suitable for moderate-complexity logic systems where I/O density and configuration retention matter more than the very high logic capacity of modern large FPGAs.
The 158 user I/Os provide substantial connectivity for external memory, data converters, communications transceivers, control interfaces, and mixed peripheral logic. The 208-lead quad-flat package is larger than modern fine-pitch FPGA packages, but it supports a high pin count and is compatible with the same 208-BFQFP family footprint used by the listed APA075-PQ208 and APA075-PQG208 variants. The A suffix identifies the specified ordering variant, while PQG208 denotes the related lead-free package designation listed for the same ProASICPLUS device family.
Typical applications include industrial automation controllers, data-acquisition systems, communications interface modules, test and measurement equipment, embedded control platforms, and ASIC prototypes. In each case, the device can implement control logic, protocol interfaces, timing functions, and peripheral glue logic while retaining its configuration after power cycles. The design flow also allows late-stage logic changes without fabricating a new ASIC.
A key design consideration is the relationship between clock rate, I/O use, power consumption, and board-level signal integrity. High-speed signals require controlled routing, correct termination, and adequate power-plane distribution. Designers should also verify the exact temperature grade, speed grade, configuration requirements, and exposed package details against the Microchip APA075 datasheet before releasing a production PCB.
This page combines the APA075-PQ208A device identification, package and logic characteristics, verified source links, family alternatives, and application-focused design guidance to support faster component selection and board planning.
Alternativas directas para APA075-PQ208A — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con APA075-PQ208A (mismo factor de forma y huella) — difiere en Package.
APA075-PQ208
✅ Sustitución directaConsulte el precio
Ver hoja de datos →APA075-PQG208
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
APA075-PQ208I
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
APA075-PQ208X79
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
APA075-PQ208A Valores máximos y características eléctricas
| Device Type | ProASICPLUS Field Programmable Gate Array (FPGA) |
| Equivalent System Gates | 75,000 gates |
| Frecuencia de reloj máxima | 180 MHz |
| User I/O Count | 158 I/Os |
| Programmable Logic Cells | 3,072 cells |
| Configuration Technology | Nonvolatile flash |
| Power-Up Behavior | Live at power-up |
| Reprogrammability | Yes |
| Encapsulado | 208-BFQFP |
| Package Type | 208-lead plastic quad flat package |
| Lead Pitch | 0.500 mm |
| Device Technology | CMOS |
| Logic Family | ProASICPLUS |
| Design Flow | ASIC-oriented field-programmable design flow |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de APA075-PQ208A 208-lead plastic quad flat package
Configuración de pines para APA075-PQ208A (encapsulado 208-lead plastic quad flat package). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para APA075-PQ208A.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
APA075-PQ208A es adecuado para 6 aplicacións: Industrial Automation Controllers, Data-Acquisition and Instrumentation, Communications Interface Modules, Test and Measurement Equipment, ASIC Prototyping and Bring-Up, Embedded Control and Peripheral Consolidation.
Industrial Automation Controllers
The APA075-PQ208A fits industrial automation controllers because its 75,000 equivalent gates and 3,072 programmable logic cells can combine sequencing logic, machine-state machines, interlocks, and communications interfaces. The 158 user I/Os provide ample connectivity for sensors, actuators, optocouplers, counters, and field-bus transceivers without requiring a separate programmable-logic device for every interface. Nonvolatile flash configuration also allows the controller to begin operation from a known logic image after power restoration, while the ASIC-oriented flow supports a controlled migration from prototype FPGA logic to a production ASIC. Designers should reserve clock and power distribution resources because the listed 180 MHz maximum frequency represents the device's top performance capability rather than a guaranteed system-level rate for every pin and I/O combination.
Recomendado
Data-Acquisition and Instrumentation
APA075-PQ208A is well suited to data-acquisition and measurement systems that combine multiple data converters, buffering, trigger control, timing, and communications logic. Its 158 I/Os can support parallel data paths, control signals, status indicators, and interface standards while the 75,000-gate capacity provides more logic capacity than a small microcontroller can economically implement in discrete peripheral logic. The nonvolatile configuration allows a calibration or instrument-control bitstream to remain resident in the FPGA during power cycles. For high-performance acquisition, use disciplined clock routing, controlled impedance, solid ground-plane continuity, and separate analog and digital power distribution so digital FPGA transitions do not corrupt the measurement front end.
Recomendado
Communications Interface Modules
The APA075-PQ208A can implement protocol formatting, packet routing, FIFO control, clock-domain interfaces, and line-interface logic in communications equipment. Its 158 user I/Os are useful for parallel buses, control signals, and external transceivers, while 75,000 equivalent gates provide sufficient density for multi-block protocol logic. Live-at-power-up and nonvolatile flash behavior can simplify initialization of dedicated interface modules that must come online deterministically after power restoration. Timing closure is the primary design concern: route clocks through dedicated resources, match external transceiver delays to the FPGA timing budget, and verify that the selected I/O standard and pin assignments meet the interface's edge-rate requirements.
Recomendado
Test and Measurement Equipment
APA075-PQ208A is appropriate for test and measurement instruments that require configurable sequencing, pattern generation, timing control, and instrument-bus logic. The 3,072 logic cells can implement measurement algorithms, state machines, and command interpreters, while 158 I/Os expose high parallelism to external converters, display controllers, and front-panel interfaces. Since the device remains programmed when power is removed, it can support repeatable self-test and calibration behavior across power cycles. For laboratory-grade performance, isolate high-impedance analog front ends from FPGA switching activity, use independent voltage regulation where required, and validate edge rates and settling behavior with the exact I/O modes used in production.
Recomendado
ASIC Prototyping and Bring-Up
APA075-PQ208A provides a practical implementation target for validating moderate-complexity ASIC logic before tape-out. Engineers can partition control, interface, and datapath functions into programmable flash logic, use the ASIC-oriented flow to evaluate the design, and revise functionality without changing a fixed mask set. The 208-BFQFP package offers 158 I/Os, which is valuable for exercising realistic external interfaces during prototype bring-up. The trade-off is that the final ASIC will not exactly reproduce every FPGA implementation detail, so timing constraints, pin assignments, power sequencing, and synthesis assumptions should be reviewed against the target ASIC process and board requirements.
Recomendado
Embedded Control and Peripheral Consolidation
APA075-PQ208A can consolidate timing-sensitive peripheral logic around a microcontroller, implementing motor sequencing, pulse generation, custom bus handling, or monitoring functions that are awkward to service directly from firmware. The 75,000 equivalent gates provide a substantial combinational and sequential-logic budget, and the 158 I/Os reduce pressure on the host processor's pin count. Nonvolatile flash configuration allows a dedicated control subsystem to restart without an external configuration sequence. A robust design should define reset ownership between the FPGA and microcontroller, provide deterministic boot-strapping behavior, and use watchdogs or heartbeat monitoring so a stalled FPGA configuration or clock fault cannot leave the embedded system in an unsafe state.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para APA075-PQ208A — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | APA075-PQ208 | APA075-PQG208 | APA075-PQ208I | APA075-PQ208X79 |
|---|---|---|---|---|---|
| Package | 208-BFQFP | 208-BFQFP | 208-BFQFP | 208-BFQFP | 208-lead PQFP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Device Type | ProASICPLUS flash FPGA | ProASICPLUS flash FPGA | ProASICPLUS flash FPGA | ProASICPLUS flash FPGA | ProASICPLUS flash FPGA |
Diferenciadores clave
- Matches the directly documented APA075-PQ208 package and core logic configuration (frente a APA075-PQ208)
- Provides a package-matched lead-free family option for procurement and BOM alignment (frente a APA075-PQG208)
- Combines nonvolatile configuration with a high 158-pin I/O count (frente a APA075-PQ208I)
Notas de diseño
Route clocks with dedicated FPGA clock resources and keep clock paths short and symmetric. The 208-BFQFP footprint has 0.500 mm terminal pitch, so use a PCB assembly process capable of handling fine-pitch gull-wing leads. Place decoupling close to the power pins, provide a continuous ground plane, and avoid routing high-speed signals across plane splits or noisy switching-regulator areas.
Use the manufacturer's recommended I/O standard and termination scheme for each external interface. The listed 180 MHz maximum frequency does not guarantee 180 MHz operation on every package pin. Establish timing constraints for external clocks and data buses, account for transceiver delay, and validate edge rates, ringing, and setup-and-hold margin on the assembled PCB before production release.
Do not treat APA075-PQ208, APA075-PQG208, APA075-PQ208I, and APA075-PQ208X79 as interchangeable solely because they share the 208-lead package family. Confirm the ordering code, temperature range, speed grade, qualification status, and any programmed-device condition in the Microchip ordering documentation. Also verify the manufacturing and programming requirements for any application-specific X79 ordering condition before schematic release.
Estimate the complete board power budget rather than relying on the FPGA's logic capacity alone. Include core and I/O supply currents, power-up sequencing, external transceiver loads, and regulator tolerance. Use the manufacturer operating-current tables for the actual clock, I/O, and temperature conditions, and size local decoupling and power distribution for simultaneous switching activity rather than average laboratory activity.
Información de cumplimiento
The APA075-PQG208 listing identifies a lead-free package option, but the exact compliance status of APA075-PQ208A is not explicitly documented in the available product information. AEC-Q100 status is not applicable to this catalog FPGA.