AT90CAN128-16AU - 16MHz AVR CAN MCU | Microchip Technology
N.º de pieza: AT90CAN128-16AU ✓ ActivoAT90CAN128-16AU Descripción general
An 8-bit microcontroller is a compact computing device that integrates a processor core, memory, and peripherals on one semiconductor package. The AT90CAN128 belongs to the AVR enhanced RISC family and combines a controller hierarchy of microcontroller, embedded processor, and programmable logic device. Its CAN 2.0A and CAN 2.0B controller distinguishes it from general-purpose 8-bit MCUs by supporting deterministic message-based communication between distributed electronic modules.
Key features include 128 KB of in-system-programmable flash, 4 KB EEPROM, 4 KB SRAM, and a maximum clock frequency of 16 MHz. The device provides 53 general-purpose I/O lines and integrates two USARTs, SPI, a byte-oriented two-wire serial interface, eight ADC channels as reported by the product listing, and multiple timer/counter and PWM functions. Its operating supply range is listed as 2.7 V to 5.5 V, while the -16AU grade is identified as a 64-pin TQFP device.
The AVR enhanced RISC architecture supports efficient execution of the microcontroller's instruction set, making the AT90CAN128 appropriate for protocol handling, supervisory control, data acquisition, and actuator control. Integrated CAN capability reduces the need for a separate protocol controller, while the large flash and SRAM resources allow firmware for communication stacks and application logic to reside directly on the chip. The two USARTs support concurrent serial links to sensors, displays, or service interfaces.
Typical applications include industrial CAN nodes, automotive body and comfort modules, building automation endpoints, motor and actuator controllers, instrumentation gateways, and low-cost embedded CAN test equipment. The controller is particularly useful when several distributed nodes must exchange prioritized messages while a local microcontroller also handles timing, analog measurement, diagnostics, or user-interface functions.
Designers should pay close attention to CAN transceiver selection, bus termination, clock stability, decoupling, programming access, and the voltage limitations of each I/O pin. The 64-TQFP footprint is relatively pin-dense, so fanout and assembly planning should be completed before layout. Use the manufacturer's pin-description table and complete datasheet when assigning tracks, programming signals, analog inputs, and power pins.
This product page combines the manufacturer's core device description with package, memory, interface, and supply information, then adds application guidance, comparison criteria, and design-oriented cautions. It is intended to help engineers assess AT90CAN128-16AU suitability for CAN-connected embedded products without overlooking memory capacity, clock rate, package constraints, or lifecycle considerations.
Alternativas directas para AT90CAN128-16AU — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con AT90CAN128-16AU (mismo factor de forma y huella) — difiere en Package, Flash Memory, CAN Controller, SRAM, ADC.
AT90CAN128-16AJ
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
AT90CAN128-16AI
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
AT90CAN128-15AT1
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
AT90CAN128-16AUR
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
AT90CAN128-16AU Valores máximos y características eléctricas
| Product Type | 8-bit AVR RISC microcontroller with CAN controller |
| Frecuencia de reloj máxima | 16 MHz |
| Flash Memory | 128 KB (128K x 8) |
| EEPROM | 4 KB |
| SRAM | 4 KB |
| General-Purpose I/O Lines | 53 lines |
| General-Purpose Working Registers | 32 registers |
| CAN Controller | CAN 2.0A and CAN 2.0B compliant |
| USART Interfaces | 2 interfaces |
| Two-Wire Serial Interface | Byte-oriented interface |
| SPI Interface | 1 interface |
| ADC Channels | 8 channels |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Rango de temperatura de funcionamiento | -40 °C to 85 °C |
| Encapsulado | 64-pin TQFP, 14 mm x 14 mm |
| Tipo de montaje | Surface mount |
| Architecture | AVR enhanced RISC |
| Programming Interface | In-system programming |
Guía de configuración de pines de AT90CAN128-16AU 64-pin tqfp, 14 mm x 14 mm
Configuración de pines para AT90CAN128-16AU (encapsulado 64-pin tqfp, 14 mm x 14 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para AT90CAN128-16AU.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
AT90CAN128-16AU es adecuado para 6 aplicacións: Industrial CAN Control Node, Automotive Body Control Module, Building Automation Endpoint, CAN-Connected Data Acquisition Unit, Motor and Actuator Controller, CAN Network Test and Diagnostics Fixture.
Industrial CAN Control Node
The AT90CAN128-16AU fits industrial CAN nodes that must combine protocol handling with local control and measurement. Its 16 MHz AVR core provides processing headroom for communication tasks, while 128 KB flash and 4 KB SRAM accommodate application firmware, buffers, and diagnostic state. The integrated CAN 2.0A/2.0B controller removes a separate protocol-controller requirement, and 53 I/O lines can connect sensors, discrete controls, and status indicators. Two USARTs and SPI preserve options for local service interfaces. In operation, the MCU would exchange prioritized CAN frames while independently handling timers, analog channels, and real-time counter tasks. Designers should add an appropriate CAN transceiver, bus protection, termination, and verified decoupling around the 64-TQFP device.
Recomendado
Automotive Body Control Module
The AT90CAN128-16AU is suitable for distributed vehicle body-control functions where CAN communications, logic inputs, and local timing must coexist. Its 16 MHz AVR processor and 128 KB ISP flash support vehicle messaging, diagnostics, state-machine logic, and configurable control functions. The integrated CAN 2.0A/2.0B controller supports message-based communication with other vehicle modules, while the 53 I/O lines can serve switches, lamps, sensors, and actuator drivers. The published -40 °C to 85 °C range covers many body-comfort applications, but the exact automotive qualification requirements and transient environment must be reviewed. The 64-pin TQFP footprint also demands careful high-density PCB layout, with attention to ground integrity, supply routing, ESD protection, and power-budget verification.
Recomendado
Building Automation Endpoint
The AT90CAN128-16AU can serve as a building-automation endpoint for lighting, HVAC, access control, or environmental monitoring. A CAN network provides deterministic communication among distributed room equipment, while the MCU's 128 KB flash supports protocol, schedules, and application logic. Its 4 KB SRAM and 53 I/O lines allow the device to supervise switches, relays, sensors, and local status indicators without requiring a separate CAN controller. The two USARTs can support display or service connections, and the eight-channel ADC supports basic analog monitoring where the selected configuration permits. In a deployed node, low-power behavior, watchdog settings, and bus fault recovery are central design considerations. A robust implementation should include galvanic-isolation options where required, surge protection, defined termination, and a controlled 2.7 V to 5.5 V supply.
Recomendado
CAN-Connected Data Acquisition Unit
The AT90CAN128-16AU fits a compact data-acquisition unit that gathers sensor information and forwards processed measurements over CAN. The 16 MHz AVR core can execute sampling logic, filtering, calibration handling, and protocol formatting, while the eight ADC channels provide multiple analog inputs. Its 128 KB flash, 4 KB EEPROM, and 4 KB SRAM separate program storage, persistent parameters, and working data. A CAN 2.0A/2.0B controller handles network communication without a separate protocol device, and the two USARTs can connect to external sensors or configuration tools. Real-time counter and timer resources support periodic acquisition independent of message traffic. Engineering teams should define analog input ranges, grounding, calibration storage, watchdog behavior, and bus termination before release, especially where the measured signals are noisy or safety-relevant.
Recomendado
Motor and Actuator Controller
The AT90CAN128-16AU can coordinate a CAN-addressed motor or actuator subsystem while performing local timing and control functions. Its flexible timer/counter blocks with compare and PWM capabilities support commutation, excitation, speed-reference, or general actuator timing, and the CAN controller allows commands and diagnostics to be exchanged with a central controller. Sixteen megahertz clock performance provides headroom for closed-loop calculations, while 128 KB flash accommodates state machines and tuning parameters. The 53 I/O lines can interface position sensors, limit switches, gate-driver controls, and fault inputs. A practical design should use the timer outputs for deterministic timing, isolate noisy motor power from logic ground as appropriate, and provide hardware shutdown paths that do not depend solely on firmware. The 64-TQFP layout also requires careful component placement around sensitive analog and clock nets.
Recomendado
CAN Network Test and Diagnostics Fixture
The AT90CAN128-16AU is well suited to a compact CAN test fixture because it combines a programmable AVR MCU with an integrated CAN controller and multiple serial interfaces. The 128 KB ISP flash can hold stimulus patterns, logging logic, protocol checks, and configuration scripts, while the 16 MHz core supports deterministic test sequencing. Two USARTs can connect to a host and to debug logs, while SPI and the byte-oriented two-wire interface support additional instruments or configuration memory. The device's timers can trigger repeatable test intervals, and its 53 I/O lines allow pass/fail indicators, relay controls, and interlock inputs. For a robust fixture, use an isolated or protected transceiver arrangement, verified bus termination, independent fault indicators, and a defined recovery strategy for bus-off and communication-error conditions.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para AT90CAN128-16AU — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | AT90CAN128-16AJ | AT90CAN128-16AI | AT90CAN128-15AT1 | AT90CAN128-16AUR |
|---|---|---|---|---|---|
| Package | 64-pin TQFP (14 mm x 14 mm) | 64-pin TQFP (14 mm x 14 mm) | 64-pin TQFP (14 mm x 14 mm) | 64-pin TQFP (14 mm x 14 mm) | 64-pin TQFP (14 mm x 14 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 16 MHz | 16 MHz | 16 MHz | 15 MHz | 16 MHz |
Diferenciadores clave
- Higher clock rating than the 15 MHz family ordering option (frente a AT90CAN128-15AT1)
- Complete integration of CAN and extensive serial peripherals (frente a ATMEGA128-16AU)
- Large on-chip memory for protocol stacks and application firmware (frente a ATMEGA64A-ANR)
Notas de diseño
Place decoupling capacitors immediately beside the AT90CAN128-16AU supply and ground pins, and route the clock network as a short, controlled-impedance path away from CAN and switching-node traces. The device uses a 64-pin TQFP package with a 0.5 mm pitch, so assembly clearance, fanout, via strategy, and component placement should be planned before committing to a board layout.
Keep the MCU's CAN TX and RX connections away from noisy analog and power-converter traces, then connect them to the external transceiver through the shortest practical route. A CAN transceiver and suitable bus protection are required; the MCU's integrated controller does not replace the physical-layer driver. Verify termination only at the appropriate bus endpoints and test bus rise time, common-mode behavior, and recovery from bus-off conditions.
Do not treat a similar AT90CAN128 ordering code as interchangeable without checking the clock, temperature grade, package, lifecycle status, and ordering information. AT90CAN128-15AT1 is rated at 15 MHz rather than 16 MHz, while other suffix variants may denote different grade or packaging arrangements. Confirm the exact manufacturer ordering table before approving a substitution or changing the production BOM.
Design the 2.7 V to 5.5 V supply rail with adequate startup, transient response, and decoupling for the MCU's digital load and attached peripherals. Check input voltage limits for every connected signal rather than applying the supply range to all pins indiscriminately. If the board also includes analog sensors or CAN bus protection, budget their supply and ground currents before selecting regulators and bulk capacitance.
Información de cumplimiento
The exact AT90CAN128-16AU ordering code is not identified as AEC-Q100 qualified in the available manufacturer information. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or declaration.