Microchip Technology

AT90CAN128-16AU - 16MHz AVR CAN MCU | Microchip Technology

MPN: AT90CAN128-16AU ✓ פעיל
2.7 V to 5.5 V Vdss 64-pin TQFP, 14 mm x 14 mm Package 16 MHz Speed 128 KB (128K x 8) Memory
כמות הזמנה מינימלית: 1 |

AT90CAN128-16AU סקירה

The Microchip Technology AT90CAN128-16AU is an 8-bit AVR RISC microcontroller with a 16 MHz clock, 128 KB of ISP flash memory, and an integrated CAN controller in a 64-pin TQFP package. It combines 4 KB EEPROM, 4 KB SRAM, 53 general-purpose I/O lines, 32 working registers, two USARTs, an SPI interface, a byte-oriented two-wire interface, and real-time counter and timer resources for embedded control systems.

An 8-bit microcontroller is a compact computing device that integrates a processor core, memory, and peripherals on one semiconductor package. The AT90CAN128 belongs to the AVR enhanced RISC family and combines a controller hierarchy of microcontroller, embedded processor, and programmable logic device. Its CAN 2.0A and CAN 2.0B controller distinguishes it from general-purpose 8-bit MCUs by supporting deterministic message-based communication between distributed electronic modules.

Key features include 128 KB of in-system-programmable flash, 4 KB EEPROM, 4 KB SRAM, and a maximum clock frequency of 16 MHz. The device provides 53 general-purpose I/O lines and integrates two USARTs, SPI, a byte-oriented two-wire serial interface, eight ADC channels as reported by the product listing, and multiple timer/counter and PWM functions. Its operating supply range is listed as 2.7 V to 5.5 V, while the -16AU grade is identified as a 64-pin TQFP device.

The AVR enhanced RISC architecture supports efficient execution of the microcontroller's instruction set, making the AT90CAN128 appropriate for protocol handling, supervisory control, data acquisition, and actuator control. Integrated CAN capability reduces the need for a separate protocol controller, while the large flash and SRAM resources allow firmware for communication stacks and application logic to reside directly on the chip. The two USARTs support concurrent serial links to sensors, displays, or service interfaces.

Typical applications include industrial CAN nodes, automotive body and comfort modules, building automation endpoints, motor and actuator controllers, instrumentation gateways, and low-cost embedded CAN test equipment. The controller is particularly useful when several distributed nodes must exchange prioritized messages while a local microcontroller also handles timing, analog measurement, diagnostics, or user-interface functions.

Designers should pay close attention to CAN transceiver selection, bus termination, clock stability, decoupling, programming access, and the voltage limitations of each I/O pin. The 64-TQFP footprint is relatively pin-dense, so fanout and assembly planning should be completed before layout. Use the manufacturer's pin-description table and complete datasheet when assigning tracks, programming signals, analog inputs, and power pins.

This product page combines the manufacturer's core device description with package, memory, interface, and supply information, then adds application guidance, comparison criteria, and design-oriented cautions. It is intended to help engineers assess AT90CAN128-16AU suitability for CAN-connected embedded products without overlooking memory capacity, clock rate, package constraints, or lifecycle considerations.

חלופות תחליף ישיר עבור AT90CAN128-16AU — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם AT90CAN128-16AU (אותו גורם צורה וטביעת רגל) — שונים ב Package, Flash Memory, CAN Controller, SRAM, ADC.

Microchip Technology
Package: 64-pin QFN (9 mm x 9 mm)
CAN Controller: CAN 2.0A / 2.0B compliant
ADC: 8-channel, 10-bit
השווה עם AT90CAN128-16AU →
Microchip Technology
Package: 64-TQFP (14 mm x 14 mm)
Flash Memory: 32 KB (32K x 8)
CAN Controller: CAN V2.0A and CAN V2.0B
השווה עם AT90CAN128-16AU →
Microchip Technology
CAN Controller: Integrated, CAN 2.0A / CAN 2.0B compliant
ADC: 10-bit ADC with 8 multiplexed single-ended channels
השווה עם AT90CAN128-16AU →
Microchip Technology
Package: 64-TQFP (14x14 mm)
Flash Memory: 128 KB (64K x 16) In-System Programmable
ADC: 8-channel 10-bit
השווה עם AT90CAN128-16AU →
Microchip Technology
Package: 64-TQFP (14x14 mm)
Flash Memory: 128 KB (64K x 16)
ADC: 8-channel, 10-bit
השווה עם AT90CAN128-16AU →
Microchip Technology
Package: 64-TQFP (14x14 mm)
Flash Memory: 128 KB (64K x 16)
ADC: 8-channel, 10-bit
השווה עם AT90CAN128-16AU →
Microchip Technology
Package: 64-pin TQFP (14x14 mm)
SRAM: 8 KB
ADC: 8-channel, 10-bit
השווה עם AT90CAN128-16AU →

AT90CAN128-16AJ

✅ Drop-In
📦 64-pin TQFP (14 mm x 14 mm)
Same 16 MHz AT90CAN128 family and 64-pin TQFP footprint; ordering suffix indicates a different grade, which must be checked for temperature qualification

📋 חלופה להתייחסות (לא בקטלוג)

AT90CAN128-16AI

✅ Drop-In
📦 64-pin TQFP (14 mm x 14 mm)
Same 16 MHz AT90CAN128 family and 64-pin TQFP footprint; 16AI differs from 16AU in ordering grade and must be checked for temperature range

📋 חלופה להתייחסות (לא בקטלוג)

AT90CAN128-15AT1

✅ Drop-In
📦 64-pin TQFP (14 mm x 14 mm)
Maximum clock is 15 MHz versus 16 MHz, a 6.25% reduction; AT1 ordering code also requires temperature-grade verification

📋 חלופה להתייחסות (לא בקטלוג)

AT90CAN128-16AUR

✅ Drop-In
📦 64-pin TQFP (14 mm x 14 mm)
Same 16 MHz device and 64-pin TQFP footprint; R suffix changes reel packaging orientation rather than electrical parameters

📋 חלופה להתייחסות (לא בקטלוג)

AT90CAN128-16AU דירוגים מרביים ומאפיינים חשמליים

Product Type 8-bit AVR RISC microcontroller with CAN controller
תדר שעון מקסימלי 16 MHz
Flash Memory 128 KB (128K x 8)
EEPROM 4 KB
SRAM 4 KB
General-Purpose I/O Lines 53 lines
General-Purpose Working Registers 32 registers
CAN Controller CAN 2.0A and CAN 2.0B compliant
USART Interfaces 2 interfaces
Two-Wire Serial Interface Byte-oriented interface
SPI Interface 1 interface
ADC Channels 8 channels
Supply Voltage Range 2.7 V to 5.5 V
טווח טמפרטורת פעולה -40 °C to 85 °C
מארז 64-pin TQFP, 14 mm x 14 mm
סוג הרכבה Surface mount
Architecture AVR enhanced RISC
Programming Interface In-system programming

מדריך תצורת פינים של AT90CAN128-16AU 64-pin tqfp, 14 mm x 14 mm

תצורת פינים עבור AT90CAN128-16AU (מארזת 64-pin tqfp, 14 mm x 14 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 64-pin tqfp, 14 mm x 14 mm עבור AT90CAN128-16AU

אין נתוני פריסת פינים מפורטים עבור AT90CAN128-16AU.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

AT90CAN128-16AU מתאים עבור 6 יישוםs: Industrial CAN Control Node, Automotive Body Control Module, Building Automation Endpoint, CAN-Connected Data Acquisition Unit, Motor and Actuator Controller, CAN Network Test and Diagnostics Fixture.

🏭

Industrial CAN Control Node

The AT90CAN128-16AU fits industrial CAN nodes that must combine protocol handling with local control and measurement. Its 16 MHz AVR core provides processing headroom for communication tasks, while 128 KB flash and 4 KB SRAM accommodate application firmware, buffers, and diagnostic state. The integrated CAN 2.0A/2.0B controller removes a separate protocol-controller requirement, and 53 I/O lines can connect sensors, discrete controls, and status indicators. Two USARTs and SPI preserve options for local service interfaces. In operation, the MCU would exchange prioritized CAN frames while independently handling timers, analog channels, and real-time counter tasks. Designers should add an appropriate CAN transceiver, bus protection, termination, and verified decoupling around the 64-TQFP device.

🚗

Automotive Body Control Module

The AT90CAN128-16AU is suitable for distributed vehicle body-control functions where CAN communications, logic inputs, and local timing must coexist. Its 16 MHz AVR processor and 128 KB ISP flash support vehicle messaging, diagnostics, state-machine logic, and configurable control functions. The integrated CAN 2.0A/2.0B controller supports message-based communication with other vehicle modules, while the 53 I/O lines can serve switches, lamps, sensors, and actuator drivers. The published -40 °C to 85 °C range covers many body-comfort applications, but the exact automotive qualification requirements and transient environment must be reviewed. The 64-pin TQFP footprint also demands careful high-density PCB layout, with attention to ground integrity, supply routing, ESD protection, and power-budget verification.

🧩

Building Automation Endpoint

The AT90CAN128-16AU can serve as a building-automation endpoint for lighting, HVAC, access control, or environmental monitoring. A CAN network provides deterministic communication among distributed room equipment, while the MCU's 128 KB flash supports protocol, schedules, and application logic. Its 4 KB SRAM and 53 I/O lines allow the device to supervise switches, relays, sensors, and local status indicators without requiring a separate CAN controller. The two USARTs can support display or service connections, and the eight-channel ADC supports basic analog monitoring where the selected configuration permits. In a deployed node, low-power behavior, watchdog settings, and bus fault recovery are central design considerations. A robust implementation should include galvanic-isolation options where required, surge protection, defined termination, and a controlled 2.7 V to 5.5 V supply.

📟

CAN-Connected Data Acquisition Unit

The AT90CAN128-16AU fits a compact data-acquisition unit that gathers sensor information and forwards processed measurements over CAN. The 16 MHz AVR core can execute sampling logic, filtering, calibration handling, and protocol formatting, while the eight ADC channels provide multiple analog inputs. Its 128 KB flash, 4 KB EEPROM, and 4 KB SRAM separate program storage, persistent parameters, and working data. A CAN 2.0A/2.0B controller handles network communication without a separate protocol device, and the two USARTs can connect to external sensors or configuration tools. Real-time counter and timer resources support periodic acquisition independent of message traffic. Engineering teams should define analog input ranges, grounding, calibration storage, watchdog behavior, and bus termination before release, especially where the measured signals are noisy or safety-relevant.

⚙️

Motor and Actuator Controller

The AT90CAN128-16AU can coordinate a CAN-addressed motor or actuator subsystem while performing local timing and control functions. Its flexible timer/counter blocks with compare and PWM capabilities support commutation, excitation, speed-reference, or general actuator timing, and the CAN controller allows commands and diagnostics to be exchanged with a central controller. Sixteen megahertz clock performance provides headroom for closed-loop calculations, while 128 KB flash accommodates state machines and tuning parameters. The 53 I/O lines can interface position sensors, limit switches, gate-driver controls, and fault inputs. A practical design should use the timer outputs for deterministic timing, isolate noisy motor power from logic ground as appropriate, and provide hardware shutdown paths that do not depend solely on firmware. The 64-TQFP layout also requires careful component placement around sensitive analog and clock nets.

🖥️

CAN Network Test and Diagnostics Fixture

The AT90CAN128-16AU is well suited to a compact CAN test fixture because it combines a programmable AVR MCU with an integrated CAN controller and multiple serial interfaces. The 128 KB ISP flash can hold stimulus patterns, logging logic, protocol checks, and configuration scripts, while the 16 MHz core supports deterministic test sequencing. Two USARTs can connect to a host and to debug logs, while SPI and the byte-oriented two-wire interface support additional instruments or configuration memory. The device's timers can trigger repeatable test intervals, and its 53 I/O lines allow pass/fail indicators, relay controls, and interlock inputs. For a robust fixture, use an isolated or protected transceiver arrangement, verified bus termination, independent fault indicators, and a defined recovery strategy for bus-off and communication-error conditions.

What is the AT90CAN128-16AU?
The AT90CAN128-16AU is a Microchip Technology 8-bit AVR RISC microcontroller operating at 16 MHz with an integrated CAN 2.0A/2.0B controller. According to the manufacturer product page, it combines 128 KB ISP flash, 4 KB EEPROM, 4 KB SRAM, 53 general-purpose I/O lines, 32 working registers, two USARTs, SPI, a byte-oriented two-wire interface, real-time counter resources, and timer/counter peripherals in a 64-pin TQFP package.
What is the operating voltage of AT90CAN128-16AU?
The AT90CAN128-16AU operates from 2.7 V to 5.5 V according to its published product specifications. This range supports both 3.3 V and 5 V embedded systems, although individual I/O pins and external interfaces must not exceed their specified voltage limits. The manufacturer product page confirms the device family and its integrated CAN, memory, timer, counter, and serial-interface resources.
How much flash and SRAM does AT90CAN128-16AU have?
The AT90CAN128-16AU provides 128 KB of ISP flash, 4 KB of EEPROM, and 4 KB of SRAM. The manufacturer describes the flash as 128K x 8 and identifies the MCU as an 8-bit AVR RISC device with 32 general-purpose working registers. These resources support firmware, CAN communication routines, calibration data, buffers, and application state within one integrated controller.
Where can I download the AT90CAN128-16AU datasheet PDF?
The official AT90CAN128 product page provides the manufacturer-supported documentation path for the AT90CAN128 family, including the AT90CAN128-16AU ordering code. Use the Microchip Technology AT90CAN128 page at the datasheet URL on this record to locate current device documentation and ordering information. The 64-TQFP pin assignments, electrical limits, and programming details should be taken from the complete manufacturer datasheet.
Where can I find the AT90CAN128 pinout?
The AT90CAN128 pinout is published in the manufacturer datasheet for the 64-pin TQFP package. The verified distributor listing identifies the AT90CAN128-16AU as a 64-TQFP, 14 mm x 14 mm device. Use the datasheet pin-description table and package drawing to map power, ground, reset, programming, clock, I/O, and peripheral signals before assigning PCB tracks.
What CAN standard does AT90CAN128-16AU support?
The AT90CAN128-16AU includes a CAN controller compliant with CAN 2.0A and CAN 2.0B. According to the manufacturer product description, this controller is integrated with 128 KB of flash, 4 KB EEPROM, 4 KB SRAM, and 53 I/O lines. A physical CAN transceiver is still required to connect the controller's digital CAN signals to a differential bus.
What peripherals are integrated into AT90CAN128-16AU?
The AT90CAN128-16AU integrates two USARTs, SPI, a byte-oriented two-wire serial interface, an eight-channel ADC, real-time counter resources, and flexible timer/counter blocks with compare and PWM functions. The manufacturer also identifies 32 working registers and 53 general-purpose I/O lines. This peripheral mix supports CAN gateways, data acquisition, local control, serial communication, and actuator timing in a single device.
How do I program the AT90CAN128-16AU?
The AT90CAN128-16AU supports in-system programming through the programming interface described in the manufacturer datasheet. Its 128 KB code memory is explicitly described as ISP flash. Programming should follow the documented reset, clock, and programming-pin sequence, while the assembled system must provide a stable clock and suitable power to ensure successful programming and reliable operation.
What is the AT90CAN128-16AU clock speed?
The AT90CAN128-16AU has a maximum clock frequency of 16 MHz, as shown by the -16 ordering designation and confirmed by distributor specifications. The MCU uses the AVR enhanced RISC architecture, and the product documentation reports execution approaching 1 MIPS per MHz in the family description. The external clock and fuse configuration must match the operating requirements of the assembled design.
When should I choose AT90CAN128-16AU over another AVR MCU?
Choose AT90CAN128-16AU when a design needs both a 16 MHz AVR controller and an integrated CAN 2.0A/2.0B interface. Its 128 KB flash, 4 KB SRAM, 53 I/O lines, two USARTs, SPI, two-wire serial interface, and eight ADC channels provide a broad peripheral set for industrial nodes, vehicle modules, and building equipment. Select it only when its 64-pin TQFP footprint and supply range fit the PCB.
What is the best drop-in replacement for AT90CAN128-16AU?
The closest identified replacements are same-family ordering variants such as AT90CAN128-16AJ, AT90CAN128-16AI, and AT90CAN128-15AT1, but each can differ in grade, temperature, clock, or ordering interpretation. No verified cross-brand, pin-to-pin equivalent with the same 64-TQFP footprint was identified. Confirm the complete ordering-code table, temperature grade, clock requirement, and lifecycle status before treating any variant as a drop-in replacement.
Can AT90CAN128-16AJ replace AT90CAN128-16AU?
AT90CAN128-16AJ is a close AT90CAN128-family candidate because it is identified by a cross-reference listing, but replacement should not be assumed solely from the similar ordering code. Confirm that both versions use the same 64-pin TQFP footprint, supply limits, clock rating, and intended temperature grade. Microchip's complete ordering information and the current product lifecycle status are the controlling references for a production substitution.
Is AT90CAN128-16AU suitable for industrial CAN control?
The AT90CAN128-16AU is suitable for many industrial CAN-control tasks because it combines a 16 MHz 8-bit AVR core, 128 KB flash, 4 KB SRAM, 53 I/O lines, and a CAN 2.0A/2.0B controller. Its published operating range includes -40 °C to 85 °C. Industrial suitability still depends on EMC design, transient protection, bus protection, calibration, regulatory requirements, and the availability of the exact ordering code.
Is AT90CAN128-16AU in stock and what is its lead time?
Current stock and lead time should be requested through the Request a Quote form on this page because availability can vary by package, quantity, and regional supply. The distributor result identifies the part as a catalogued AT90CAN128-16AU offering, but it does not provide a fixed quantity-break schedule for this exact MPN. Procurement should confirm lot traceability, lifecycle status, and delivery terms before committing a production schedule.
What is the price of AT90CAN128-16AU?
Current pricing for the AT90CAN128-16AU should be obtained through the Request a Quote form on this page. The available distributor pages identify the exact device and its technical characteristics, but the retrieved listings do not show a qualifying quantity-break price table for this ordering code. The quote process can confirm current unit availability, volume breaks, packaging, and expected lead time.

נתוני עזר הנדסיים עבור AT90CAN128-16AU — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose AT90CAN128-16AU for embedded designs that need a 16 MHz 8-bit AVR MCU, 128 KB flash, 4 KB SRAM, and an integrated CAN 2.0A/2.0B controller without adding a separate protocol controller. It is particularly appropriate for industrial nodes, vehicle body modules, building controls, and CAN-connected measurement equipment where two USARTs, SPI, two-wire serial, eight ADC channels, and 53 I/O lines are useful. AT90CAN128-16AJ and AT90CAN128-16AI are close same-family candidates, but their grade and temperature details must be checked. AT90CAN128-15AT1 may fit designs that do not require 16 MHz timing, subject to qualification review. AT90CAN128-16AUR provides the same electrical device in a reel-oriented ordering arrangement. No verified cross-brand drop-in equivalent was identified, and every candidate uses the relatively dense 64-pin TQFP footprint, so alternatives do not remove PCB-layout or supply-availability risk.

השוואה עם חלופות

פרמטר מוצר זה AT90CAN128-16AJ AT90CAN128-16AI AT90CAN128-15AT1 AT90CAN128-16AUR
Package 64-pin TQFP (14 mm x 14 mm) 64-pin TQFP (14 mm x 14 mm) 64-pin TQFP (14 mm x 14 mm) 64-pin TQFP (14 mm x 14 mm) 64-pin TQFP (14 mm x 14 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Maximum Clock Frequency 16 MHz 16 MHz 16 MHz 15 MHz 16 MHz

מבדילים עיקריים

  • Higher clock rating than the 15 MHz family ordering option (לעומתAT90CAN128-15AT1)
  • Complete integration of CAN and extensive serial peripherals (לעומתATMEGA128-16AU)
  • Large on-chip memory for protocol stacks and application firmware (לעומתATMEGA64A-ANR)

הערות תכנון

Place decoupling capacitors immediately beside the AT90CAN128-16AU supply and ground pins, and route the clock network as a short, controlled-impedance path away from CAN and switching-node traces. The device uses a 64-pin TQFP package with a 0.5 mm pitch, so assembly clearance, fanout, via strategy, and component placement should be planned before committing to a board layout.

Keep the MCU's CAN TX and RX connections away from noisy analog and power-converter traces, then connect them to the external transceiver through the shortest practical route. A CAN transceiver and suitable bus protection are required; the MCU's integrated controller does not replace the physical-layer driver. Verify termination only at the appropriate bus endpoints and test bus rise time, common-mode behavior, and recovery from bus-off conditions.

Do not treat a similar AT90CAN128 ordering code as interchangeable without checking the clock, temperature grade, package, lifecycle status, and ordering information. AT90CAN128-15AT1 is rated at 15 MHz rather than 16 MHz, while other suffix variants may denote different grade or packaging arrangements. Confirm the exact manufacturer ordering table before approving a substitution or changing the production BOM.

Design the 2.7 V to 5.5 V supply rail with adequate startup, transient response, and decoupling for the MCU's digital load and attached peripherals. Check input voltage limits for every connected signal rather than applying the supply range to all pins indiscriminately. If the board also includes analog sensors or CAN bus protection, budget their supply and ground currents before selecting regulators and bulk capacitance.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The exact AT90CAN128-16AU ordering code is not identified as AEC-Q100 qualified in the available manufacturer information. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or declaration.

הנתונים אומתו בתאריך: 2026-11-16 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

at90can128 16au datasheet at90can128 datasheet at90can128 pinout at90can128 programming at90can128 development board at90can128 pdf AT90CAN128-16AU datasheet pdf AT90CAN128-16AU pinout AT90CAN128-16AU equivalent AT90CAN128-16AU replacement AT90CAN128-16AU price AT90CAN128-16AU stock Microchip AT90CAN128-16AU AT90CAN128-16AU vs AT90CAN128-15AT1

רכיבים ומונחים קשורים

Microchip Technology AT90CAN128-16AU AT90CAN128-16AJ AT90CAN128-16AI AT90CAN128-15AT1 AT90CAN128-16AUR ATmega128 AVR enhanced RISC architecture 8-bit microcontroller embedded processor CAN 2.0A CAN 2.0B CAN controller CAN transceiver TQFP-64 surface-mount package ISP flash memory EEPROM SRAM USART SPI two-wire serial interface ADC industrial automation automotive body control
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר