ATF22V10C-10SI - 10ns 500-Gate EEPLD | Microchip
N.º de pieza: ATF22V10C-10SI ✓ ActivoATF22V10C-10SI Descripción general
An EEPLD is a programmable logic device whose configuration memory can be electrically erased and rewritten. Within the broader semiconductor hierarchy, an EEPLD is a programmable logic IC, a member of the PLD family, and a practical alternative to a small collection of discrete gates. ATF22V10C devices are commonly used to implement decode logic, state machines, interface control, and fixed Boolean functions in compact industrial and communications equipment.
Key features include 10 ns propagation delay, 10 macrocells, and 500-gate logic capacity. The manufacturer datasheet doc0735 states that ATF22V10C speeds extend down to 5 ns and power dissipation can be as low as 10 uA typical. An optional pin-controlled power-down function provides a way to reduce consumption when the device is not required, while the latch feature holds input states for testing and board-level diagnostics.
The ATF22V10C architecture implements combinational or registered logic through a configurable fuse map. Because the memory is electrically erasable, the design can be reprogrammed during manufacturing, prototype development, or field updates when the application permits device access. The 24-SOIC package is a surface-mount option for designs that require a small, widely supported package rather than a leaded DIP or pin-grid package.
Typical uses include industrial control interfaces, telecommunications line-card logic, automotive control modules, embedded peripheral decoding, and legacy system refresh projects. The 10 ns device class is appropriate for control logic and interface functions where propagation delay must remain predictable without introducing unnecessary cost or power dissipation for higher-speed performance.
When planning a PCB, treat all 24 SOIC positions as package pins even if the design leaves some configurable inputs or outputs unused. Program the device according to the manufacturer's programming guidance and verify the power-down, clock, and registered-output behavior in the chosen fuse map. Do not substitute the electrical characteristics of a faster speed grade without rechecking timing margins.
This page brings together the manufacturer's device description, package and timing information, a structured drop-in comparison, programming and pinout guidance, and practical application notes. It is designed to help engineers confirm footprint compatibility, evaluate speed-grade trade-offs, and plan an industrial-temperature PLD implementation efficiently.
Alternativas directas para ATF22V10C-10SI — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con ATF22V10C-10SI (mismo factor de forma y huella) — difiere en Device Type, Package, Power-Down Control, Technology.
ATF22V10C-15SI
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
ATF22V10C-7SI
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
ATF22V10C-5SI
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
ATF22V10C-10SC
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →ATF22V10C-15SC
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →ATF22V10C-10SI Valores máximos y características eléctricas
| Device Type | Electrically Erasable Programmable Logic Device (EEPLD) |
| Technology | High-performance CMOS with electrically erasable Flash memory |
| Macrocell Count | 10 macrocells |
| Logic Gate Capacity | 500 gates |
| Propagation Delay | 10 ns |
| Family Maximum Speed | 5 ns |
| Nominal Supply Voltage | 5 V |
| Industrial Supply Voltage Range | 5 V ± 10% |
| Minimum Typical Power Dissipation | 10 uA typical |
| Encapsulado | 24-SOIC |
| Tipo de montaje | Surface Mount |
| Power-Down Control | Optional pin-controlled power-down |
| Latch Feature | Yes; holds inputs to previous logic states |
| Configuration Memory | Electrically erasable Flash memory |
| Logic Implementation | Programmable combinational or registered logic |
| Temperature Grade | Industrial |
Guía de configuración de pines de ATF22V10C-10SI 24-soic
Configuración de pines para ATF22V10C-10SI (encapsulado 24-soic). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para ATF22V10C-10SI.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
ATF22V10C-10SI es adecuado para 6 aplicacións: Industrial Automation Control Logic, Telecommunications Line-Card Interface, Automotive and Vehicle Control Modules, Peripheral Address Decoding, State-Machine and Sequencer Implementation, Legacy System Refresh and PLD Consolidation.
Industrial Automation Control Logic
The ATF22V10C-10SI suits industrial control logic that requires a compact, reprogrammable implementation of decoding, sequencing, and Boolean equations. Its 10 macrocells and 500-gate capacity are sufficient for multiple interlock conditions, mode selectors, and actuator-command decoding without a larger microcontroller. The 10 ns propagation delay provides defined timing for control signals, while the industrial SI grade and 5 V ± 10% supply range fit conventional 5 V industrial boards. Electrically erasable Flash configuration is especially useful during machine commissioning, when I/O assignments or control equations may still change. Place the 24-SOIC device near the controlled interface circuitry, route the configurable I/O signals away from switching nodes, and validate the programmed fuse map under worst-case supply and temperature conditions.
Recomendado
Telecommunications Line-Card Interface
ATF22V10C-10SI can implement line-card framing, command decoding, and peripheral interface control where a small amount of deterministic parallel logic is needed. The 10 ns speed grade supports conventional control paths without the power and cost demands of the fastest ATF22V10C options, and 10 macrocells provide enough capacity to combine address decode, status multiplexing, and register updates. Its 5 V operating range and surface-mount 24-SOIC package support compact, high-density interface boards. Because the configuration is electrically erasable, engineering changes can be programmed during production without replacing the PCB. Confirm timing against the slowest control signal, observe the optional power-down behavior in low-traffic states, and keep high-speed communication traces physically separated from the configurable device inputs.
Recomendado
Automotive and Vehicle Control Modules
The ATF22V10C-10SI fits legacy vehicle-control modules that use 5 V PLD logic for switch decoding, actuator sequencing, and diagnostic signal routing. Its 10 ns propagation delay and 10-macrocell capacity provide enough performance for many control functions, while the 24-SOIC package simplifies assembly on modern surface-mount boards. The electrically erasable configuration also supports controlled engineering revisions without changing the device type. Automotive use still requires careful environmental qualification, including the required ambient-temperature range, vibration profile, supply transients, and any automotive-specific certification. Use the manufacturer's component documentation to verify those limits for the exact ordering code, and design the board so the PLD inputs remain away from ignition-system transients and motor-switching nodes.
Recomendado
Peripheral Address Decoding
The ATF22V10C-10SI is useful for decoding processor, memory, or peripheral address ranges into enables, chip selects, interrupt requests, and arbitration signals. Ten macrocells allow multiple decode equations to be combined in one device rather than being spread across several gate packages. Its 10 ns propagation delay supports many conventional bus-control paths, and the 500-gate capacity provides headroom for registered outputs and additional control terms. Electrically erasable configuration makes address-map revisions straightforward during board bring-up. Assign the bus and chip-select signals through the fuse map, then verify both address boundaries and access timing with the target peripheral. Use pull resistors or held states only where the programming guide specifies them, and check that every unused configurable terminal has a deliberate electrical state.
Recomendado
State-Machine and Sequencer Implementation
ATF22V10C-10SI can implement compact finite-state machines, protocol sequencers, and multi-step control sequences using its configurable macrocells and optional registered logic. The 10 ns propagation delay keeps state transitions deterministic across a 5 V control rail, while electrically erasable Flash allows the sequence to be corrected without a board respin. This makes the device well suited to legacy instrument control, printer sequencing, and specialized equipment where a microcontroller would add unnecessary cost. Program each state transition explicitly and test every reachable state, including fault and recovery paths. Account for propagation delay when combining outputs that must not overlap, and verify the behavior using the manufacturer's programming and test guidance before production programming.
Recomendado
Legacy System Refresh and PLD Consolidation
ATF22V10C-10SI provides a practical path for consolidating older discrete logic or one-time-programmed PLD implementations into a single reprogrammable 24-SOIC device. The 500-gate capacity and 10 macrocells can replace several small gate packages when their Boolean functions can be merged, reducing board area and simplifying documentation. Because the configuration uses electrically erasable Flash memory, the logic can be revised during prototype or production programming. A conversion still requires a full timing and polarity audit because fuse maps, control-pin states, and active levels can differ between device families. Build a pin-by-pin conversion table, confirm the new device's 5 V ± 10% industrial supply requirement, and run system-level tests for asynchronous inputs and power sequencing before releasing the redesign.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para ATF22V10C-10SI — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | ATF22V10C-15SI | ATF22V10C-7SI | ATF22V10C-5SI | ATF22V10C-10SC | ATF22V10C-15SC |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 24-SOIC | 24-SOIC - same | 24-SOIC - same | 24-SOIC - same | 24-SOIC - same | 24-SOIC - same |
| Propagation Delay | 10 ns | 15 ns | 7 ns | 5 ns | 10 ns | 15 ns |
| Logic Gate Capacity | 500 gates | 500 gates | 500 gates | 500 gates | 500 gates | 500 gates |
| Macrocell Count | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Nominal Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Temperature Grade | Industrial | Industrial | Industrial | Industrial | Commercial | Commercial |
| Configuration Memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory |
| Power-Down Control | Optional pin-controlled power-down | Optional pin-controlled power-down | Optional pin-controlled power-down | Optional pin-controlled power-down | Optional pin-controlled power-down | Optional pin-controlled power-down |
| Latch Feature | Yes | Yes | Yes | Yes | Yes | Yes |
Diferenciadores clave
- Balanced 10 ns speed for general control logic (frente a ATF22V10C-5SI)
- Industrial-temperature suffix for controlled environments (frente a ATF22V10C-10SC)
- Directly reprogrammable Flash configuration (frente a ATF22V10C-15SI)
- Higher timing headroom than the 15 ns grade (frente a ATF22V10C-15SI)
Notas de diseño
Do not assume that any ATF22V10C ordering code is electrically interchangeable with ATF22V10C-10SI. The -10 suffix sets the 10 ns speed grade, while SI identifies the industrial surface-mount configuration. ATF22V10C-10SC has the same nominal delay but a different temperature grade, while the -15, -7, and -5 options change propagation delay. Always check the family pinout, supply tolerance, temperature range, and fuse-map compatibility before substitution.
The manufacturer datasheet identifies power dissipation as low as 10 uA typical for the ATF22V10C family. Use the optional power-down function when the board spends substantial time idle, but confirm the actual static and dynamic current in the programmed configuration. Decouple the 5 V supply close to the device with the capacitance recommended in the manufacturer application guidance, and verify operation across the industrial supply range of 4.5 V to 5.5 V.
Keep the 24-SOIC footprint identical when designing a drop-in upgrade path. Place the device away from relay drivers, motor-switching stages, high-current edges, and sources of high-amplitude transients. Route configurable inputs away from parallel high-speed buses where practical, and use the manufacturer's pin-description table to identify supply, ground, control, and configurable terminals. Validate every unused input and output state in both the schematic and the programmed logic.
Budget the full 10 ns propagation delay in every path that crosses the ATF22V10C-10SI, including combinational outputs and registered-output arrangements. Do not remove timing margin merely because the device is described as a control PLD. Check clock, setup, hold, and recovery requirements against the datasheet when registered logic is used, and exercise asynchronous inputs with the latch feature enabled or disabled exactly as required by the final configuration.
Información de cumplimiento
No specific RoHS, REACH, AEC-Q100, lead-free, or halogen-free declaration appears in the retrieved device information. The ATF22V10C-10SI is an industrial-temperature logic device; automotive qualification must be confirmed for the exact ordering code before use in automotive production.