Microchip Technology

ATF22V10C-10SI - 10ns 500-Gate EEPLD | Microchip

MPN: ATF22V10C-10SI ✓ Aktif
5 V Vdss 24-SOIC Package 5 ns Speed Electrically erasable Flash memory Memory
MOQ: 1 |

ATF22V10C-10SI Ringkasan

The Microchip ATF22V10C-10SI is a 500-gate electrically erasable programmable logic device with 10 macrocells, a 10 ns propagation delay, and a 24-SOIC package. It combines CMOS logic with electrically erasable Flash memory, allowing the fuse map to be reprogrammed without a dedicated programmer. The device operates from a nominal 5 V supply and supports industrial-temperature operation.

An EEPLD is a programmable logic device whose configuration memory can be electrically erased and rewritten. Within the broader semiconductor hierarchy, an EEPLD is a programmable logic IC, a member of the PLD family, and a practical alternative to a small collection of discrete gates. ATF22V10C devices are commonly used to implement decode logic, state machines, interface control, and fixed Boolean functions in compact industrial and communications equipment.

Key features include 10 ns propagation delay, 10 macrocells, and 500-gate logic capacity. The manufacturer datasheet doc0735 states that ATF22V10C speeds extend down to 5 ns and power dissipation can be as low as 10 uA typical. An optional pin-controlled power-down function provides a way to reduce consumption when the device is not required, while the latch feature holds input states for testing and board-level diagnostics.

The ATF22V10C architecture implements combinational or registered logic through a configurable fuse map. Because the memory is electrically erasable, the design can be reprogrammed during manufacturing, prototype development, or field updates when the application permits device access. The 24-SOIC package is a surface-mount option for designs that require a small, widely supported package rather than a leaded DIP or pin-grid package.

Typical uses include industrial control interfaces, telecommunications line-card logic, automotive control modules, embedded peripheral decoding, and legacy system refresh projects. The 10 ns device class is appropriate for control logic and interface functions where propagation delay must remain predictable without introducing unnecessary cost or power dissipation for higher-speed performance.

When planning a PCB, treat all 24 SOIC positions as package pins even if the design leaves some configurable inputs or outputs unused. Program the device according to the manufacturer's programming guidance and verify the power-down, clock, and registered-output behavior in the chosen fuse map. Do not substitute the electrical characteristics of a faster speed grade without rechecking timing margins.

This page brings together the manufacturer's device description, package and timing information, a structured drop-in comparison, programming and pinout guidance, and practical application notes. It is designed to help engineers confirm footprint compatibility, evaluate speed-grade trade-offs, and plan an industrial-temperature PLD implementation efficiently.

Alternatif penggantian untuk ATF22V10C-10SI — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian ATF22V10C-10SI (sama faktor bentuk dan footprint) — berbeda di dalam Device Type, Package, Power-Down Control, Technology.

Microchip Technology
Device Type: Electrically erasable CMOS programmable logic device (EE PLD)
Package: 24-SOIC, 0.295 inch body width, 7.50 mm width
Power-Down Control: Optional pin-controlled power-down feature
Bandingkan dengan ATF22V10C-10SI →
Microchip Technology
Device Type: EEPLD
Bandingkan dengan ATF22V10C-10SI →

ATF22V10C-15SI

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 24-SOIC
Same 24-SOIC footprint and 10-macrocell architecture, but propagation delay increases from 10 ns to 15 ns, a 50% increase

📋 Alternatif referensi (tidak dalam katalog)

ATF22V10C-7SI

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 24-SOIC
Same 24-SOIC footprint and 10-macrocell architecture, with 7 ns propagation delay versus 10 ns, a 30% improvement

📋 Alternatif referensi (tidak dalam katalog)

ATF22V10C-5SI

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 24-SOIC
Same 24-SOIC footprint and 10-macrocell architecture, with 5 ns propagation delay versus 10 ns, a 50% improvement

📋 Alternatif referensi (tidak dalam katalog)

ATF22V10C-10SC

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 24-SOIC
Electrically erasable CMOS programmable logic device (EE PLD) · ATF22V10C / 22V10 · 10 macrocells · 10 ns · Electrically erasable Flash memory · CMOS · 5 V · 24-SOIC, 0.295 inch body width, 7.50 mm width

Kontak untuk harga

Lihat Datasheet →

ATF22V10C-15SC

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 24-SOIC
EEPLD · Simple Programmable Logic Device (SPLD) · 10 macrocells · 500 gates · 15 ns · 5 V · 4.5 V to 5.5 V · 4.75 V to 5.25 V

Kontak untuk harga

Lihat Datasheet →

ATF22V10C-10SI Rating Maksimal & Karakteristik Listrik

Device Type Electrically Erasable Programmable Logic Device (EEPLD)
Technology High-performance CMOS with electrically erasable Flash memory
Macrocell Count 10 macrocells
Logic Gate Capacity 500 gates
Propagation Delay 10 ns
Family Maximum Speed 5 ns
Nominal Supply Voltage 5 V
Industrial Supply Voltage Range 5 V ± 10%
Minimum Typical Power Dissipation 10 uA typical
Paket 24-SOIC
Tipe Mounting Surface Mount
Power-Down Control Optional pin-controlled power-down
Latch Feature Yes; holds inputs to previous logic states
Configuration Memory Electrically erasable Flash memory
Logic Implementation Programmable combinational or registered logic
Temperature Grade Industrial

ATF22V10C-10SI 24-soic Diamant Konfigurasi Panduan

Konfigurasi pin untuk ATF22V10C-10SI (24-soic pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 24-soic untuk ATF22V10C-10SI

Tidak ada data diatribut pin yang tersedia untuk ATF22V10C-10SI.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

ATF22V10C-10SI cocok untuk 6 aplikasis: Industrial Automation Control Logic, Telecommunications Line-Card Interface, Automotive and Vehicle Control Modules, Peripheral Address Decoding, State-Machine and Sequencer Implementation, Legacy System Refresh and PLD Consolidation.

🏭

Industrial Automation Control Logic

The ATF22V10C-10SI suits industrial control logic that requires a compact, reprogrammable implementation of decoding, sequencing, and Boolean equations. Its 10 macrocells and 500-gate capacity are sufficient for multiple interlock conditions, mode selectors, and actuator-command decoding without a larger microcontroller. The 10 ns propagation delay provides defined timing for control signals, while the industrial SI grade and 5 V ± 10% supply range fit conventional 5 V industrial boards. Electrically erasable Flash configuration is especially useful during machine commissioning, when I/O assignments or control equations may still change. Place the 24-SOIC device near the controlled interface circuitry, route the configurable I/O signals away from switching nodes, and validate the programmed fuse map under worst-case supply and temperature conditions.

🌐

Telecommunications Line-Card Interface

ATF22V10C-10SI can implement line-card framing, command decoding, and peripheral interface control where a small amount of deterministic parallel logic is needed. The 10 ns speed grade supports conventional control paths without the power and cost demands of the fastest ATF22V10C options, and 10 macrocells provide enough capacity to combine address decode, status multiplexing, and register updates. Its 5 V operating range and surface-mount 24-SOIC package support compact, high-density interface boards. Because the configuration is electrically erasable, engineering changes can be programmed during production without replacing the PCB. Confirm timing against the slowest control signal, observe the optional power-down behavior in low-traffic states, and keep high-speed communication traces physically separated from the configurable device inputs.

🚗

Automotive and Vehicle Control Modules

The ATF22V10C-10SI fits legacy vehicle-control modules that use 5 V PLD logic for switch decoding, actuator sequencing, and diagnostic signal routing. Its 10 ns propagation delay and 10-macrocell capacity provide enough performance for many control functions, while the 24-SOIC package simplifies assembly on modern surface-mount boards. The electrically erasable configuration also supports controlled engineering revisions without changing the device type. Automotive use still requires careful environmental qualification, including the required ambient-temperature range, vibration profile, supply transients, and any automotive-specific certification. Use the manufacturer's component documentation to verify those limits for the exact ordering code, and design the board so the PLD inputs remain away from ignition-system transients and motor-switching nodes.

🖥️

Peripheral Address Decoding

The ATF22V10C-10SI is useful for decoding processor, memory, or peripheral address ranges into enables, chip selects, interrupt requests, and arbitration signals. Ten macrocells allow multiple decode equations to be combined in one device rather than being spread across several gate packages. Its 10 ns propagation delay supports many conventional bus-control paths, and the 500-gate capacity provides headroom for registered outputs and additional control terms. Electrically erasable configuration makes address-map revisions straightforward during board bring-up. Assign the bus and chip-select signals through the fuse map, then verify both address boundaries and access timing with the target peripheral. Use pull resistors or held states only where the programming guide specifies them, and check that every unused configurable terminal has a deliberate electrical state.

🔧

State-Machine and Sequencer Implementation

ATF22V10C-10SI can implement compact finite-state machines, protocol sequencers, and multi-step control sequences using its configurable macrocells and optional registered logic. The 10 ns propagation delay keeps state transitions deterministic across a 5 V control rail, while electrically erasable Flash allows the sequence to be corrected without a board respin. This makes the device well suited to legacy instrument control, printer sequencing, and specialized equipment where a microcontroller would add unnecessary cost. Program each state transition explicitly and test every reachable state, including fault and recovery paths. Account for propagation delay when combining outputs that must not overlap, and verify the behavior using the manufacturer's programming and test guidance before production programming.

🧩

Legacy System Refresh and PLD Consolidation

ATF22V10C-10SI provides a practical path for consolidating older discrete logic or one-time-programmed PLD implementations into a single reprogrammable 24-SOIC device. The 500-gate capacity and 10 macrocells can replace several small gate packages when their Boolean functions can be merged, reducing board area and simplifying documentation. Because the configuration uses electrically erasable Flash memory, the logic can be revised during prototype or production programming. A conversion still requires a full timing and polarity audit because fuse maps, control-pin states, and active levels can differ between device families. Build a pin-by-pin conversion table, confirm the new device's 5 V ± 10% industrial supply requirement, and run system-level tests for asynchronous inputs and power sequencing before releasing the redesign.

Ringkasan Produk Direkomendasikan

ATF22V10C-10SC Microchip Technology Digunakan di dalam: Industrial Automation Control Logic, Automotive and Vehicle Control Modules, State-Machine and Sequencer Implementation ATF22V10C-7SI Same-family higher-speed option for shorter control paths Digunakan di dalam: Industrial Automation Control Logic, Automotive and Vehicle Control Modules, State-Machine and Sequencer Implementation ATF22V10C-15SI Lower-speed same-family option where additional timing margin is sufficient Digunakan di dalam: Telecommunications Line-Card Interface, Peripheral Address Decoding, Legacy System Refresh and PLD Consolidation ATF22V10C-5SI Higher-speed same-family option for shorter control propagation paths Digunakan di dalam: Telecommunications Line-Card Interface, Peripheral Address Decoding, Legacy System Refresh and PLD Consolidation
What is the ATF22V10C-10SI?
The ATF22V10C-10SI is a Microchip 500-gate electrically erasable programmable logic device with 10 macrocells, a 10 ns propagation delay, and a 24-SOIC package. According to the manufacturer datasheet doc0735, it uses electrically erasable Flash memory for reprogrammable configuration and operates from a nominal 5 V supply. It is intended for compact combinational or registered control-logic implementations where a surface-mount package and electrically erasable configuration memory are important.
What are the key specifications of ATF22V10C-10SI that engineers should know?
The principal ATF22V10C-10SI specifications are 10 macrocells, 500 gates of logic capacity, a 10 ns propagation delay, and a 24-SOIC package. The device uses electrically erasable Flash configuration memory and has a nominal 5 V supply with an industrial operating range of 5 V ± 10%. The manufacturer datasheet doc0735 also identifies an optional pin-controlled power-down function and a latch feature for holding input states during testing.
Where can I download the ATF22V10C datasheet PDF?
The ATF22V10C datasheet PDF is available from the Microchip product page and the manufacturer's document center. The manufacturer copy is document doc0735, while the ATF22V10C family product page links directly to the same technical information. Use the manufacturer PDF for pin descriptions, programming guidance, timing characteristics, and supply-voltage limits, and use the part-specific ordering code to confirm that the -10SI suffix denotes the intended speed and temperature grade.
Where can I find the ATF22V10C pinout?
The ATF22V10C pinout is documented in the manufacturer's ATF22V10C(Q) datasheet under the package-pin and pin-description information. The ATF22V10C-10SI uses the 24-SOIC package, and the datasheet identifies the package-specific location of the configurable I/O pins, control pins, supply connections, and optional power-down input. Assign PCB nets from the datasheet pin-description table rather than relying on package-number conventions alone.
How do I program the ATF22V10C-10SI?
Program the ATF22V10C-10SI with the fuse map and programming procedure defined for the ATF22V10C family. Its electrically erasable Flash memory allows the configuration to be rewritten without a one-time-programmable fuse process. The device also includes a power-down control and configurable input/output functions, so the programmed logic, pin states, and power-down behavior must all be verified in the programming software before production release.
What is an ATF22V10C programmable logic device?
The ATF22V10C is a high-performance CMOS PLD that stores its configurable logic in electrically erasable Flash memory. It provides 10 macrocells and up to 500 gates of logic in the ATF22V10C family, with speed options extending down to 5 ns. Compared with a permanently fused PLD, its erasable configuration supports design iteration, production programming, and controlled field updates.
What is the ATF22V10C-10SI propagation delay and supply voltage?
The ATF22V10C-10SI has a 10 ns propagation delay and operates from a nominal 5 V supply. The manufacturer datasheet doc0735 specifies the industrial supply range as 5 V ± 10%, equivalent to 4.5 V through 5.5 V. The -10 designation identifies the 10 ns speed grade, while the SI ordering suffix identifies the surface-mount industrial-temperature configuration.
What is the best drop-in replacement for ATF22V10C-10SI?
The closest drop-in replacements are other ATF22V10C speed grades packaged in the same 24-SOIC footprint, such as ATF22V10C-15SI, ATF22V10C-7SI, and ATF22V10C-5SI. They retain the family pinout and 10-macrocell architecture while changing propagation delay and, for some options, temperature grade. Confirm the required timing and temperature range before changing the installed part.
Can ATF22V10C-15SI replace ATF22V10C-10SI?
Yes, ATF22V10C-15SI can replace ATF22V10C-10SI when the circuit has adequate timing margin, because both use the same 24-SOIC package and ATF22V10C family pinout. The principal difference is propagation delay: 15 ns for the -15SI grade versus 10 ns for the -10SI grade. Verify every setup and hold requirement against the slower timing before treating it as a drop-in replacement.
When should I choose ATF22V10C-10SI over a faster ATF22V10C grade?
Choose ATF22V10C-10SI when its 10 ns propagation delay satisfies the design but a faster 7 ns or 5 ns grade would add unnecessary cost or power requirements. It retains the same ATF22V10C architecture, 10 macrocells, 500-gate capacity, and electrically erasable Flash configuration as faster members. The decision should follow the slowest required signal path rather than the highest headline speed.
Is ATF22V10C-10SI suitable for industrial automation and automotive control systems?
Yes, ATF22V10C-10SI is an industrial-temperature 5 V PLD in a 24-SOIC package, making it suitable for industrial automation, telecommunications infrastructure, and automotive control applications that use surface-mount logic. The manufacturer datasheet identifies 5 V ± 10% operation for industrial temperature ranges. Confirm the exact operating-temperature limits and automotive qualification status before releasing the design for those environments.
What is the ATF22V10C-10SI lead time and minimum order quantity?
Request the current lead time, minimum order quantity, and available package configuration through the Request a Quote form on this page. The ATF22V10C-10SI is manufactured in a 24-SOIC surface-mount package, and the exact order quantity and scheduling depend on the manufacturer's current inventory position. The Request a Quote form provides a direct route for current commercial confirmation.
Where can I buy ATF22V10C-10SI online?
Use the Request a Quote form on this page to request ATF22V10C-10SI availability, current commercial terms, and order scheduling. The part is a 24-SOIC, 10 ns, 500-gate EEPLD from Microchip Technology. Because inventory and lead time change, the quote form gives engineers a current response tied to the exact MPN rather than an outdated quantity-break listing.
What is the price of ATF22V10C-10SI?
Submit the ATF22V10C-10SI request through the Request a Quote form on this page for current pricing and volume terms. Commercial pricing depends on order quantity, contract coverage, and the manufacturer's current availability. The quote workflow on this page is the appropriate channel for obtaining a current figure for the exact 24-SOIC industrial part number.
Is ATF22V10C-10SI in stock?
Current stock status for ATF22V10C-10SI should be confirmed through the Request a Quote form on this page. The device is a 24-SOIC industrial-temperature ATF22V10C with a 10 ns delay, and its scheduling can vary with production volume. Submit the exact MPN in the quote form to obtain the latest availability and expected delivery information.
What can replace ATF22V10C-10SI?
ATF22V10C-15SI, ATF22V10C-7SI, ATF22V10C-5SI, ATF22V10C-10SC, and ATF22V10C-15SC are same-family 24-SOIC alternatives for ATF22V10C-10SI. Each retains the ATF22V10C macrocell and configuration architecture, while speed or temperature grade changes. Select the replacement by checking the required propagation delay, supply tolerance, operating-temperature range, and programmed fuse map.

Data referensi engineering untuk ATF22V10C-10SI — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose ATF22V10C-10SI when a design needs a 10 ns propagation delay, 10 macrocells, and a 24-SOIC industrial-temperature package without moving to the family's fastest speed grades. Select ATF22V10C-7SI or ATF22V10C-5SI when the slowest signal path requires additional timing margin; their faster propagation delays can simplify clocked or multi-level logic. Choose ATF22V10C-15SI only when the circuit has adequate timing margin and lower cost or power is more important than speed. Use ATF22V10C-10SC or ATF22V10C-15SC when the commercial-temperature grade is sufficient. All listed choices preserve the 24-SOIC footprint and 500-gate, 10-macrocell ATF22V10C architecture, but every substitution still requires verification of the programmed fuse map, supply tolerance, temperature range, and control-pin states.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini ATF22V10C-15SI ATF22V10C-7SI ATF22V10C-5SI ATF22V10C-10SC ATF22V10C-15SC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 24-SOIC 24-SOIC - same 24-SOIC - same 24-SOIC - same 24-SOIC - same 24-SOIC - same
Propagation Delay 10 ns 15 ns 7 ns 5 ns 10 ns 15 ns
Logic Gate Capacity 500 gates 500 gates 500 gates 500 gates 500 gates 500 gates
Macrocell Count 10 macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells
Nominal Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V
Temperature Grade Industrial Industrial Industrial Industrial Commercial Commercial
Configuration Memory Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory
Power-Down Control Optional pin-controlled power-down Optional pin-controlled power-down Optional pin-controlled power-down Optional pin-controlled power-down Optional pin-controlled power-down Optional pin-controlled power-down
Latch Feature Yes Yes Yes Yes Yes Yes

Diferensiator Kunci

  • Balanced 10 ns speed for general control logic (vsATF22V10C-5SI)
  • Industrial-temperature suffix for controlled environments (vsATF22V10C-10SC)
  • Directly reprogrammable Flash configuration (vsATF22V10C-15SI)
  • Higher timing headroom than the 15 ns grade (vsATF22V10C-15SI)

Catatan Desain

Do not assume that any ATF22V10C ordering code is electrically interchangeable with ATF22V10C-10SI. The -10 suffix sets the 10 ns speed grade, while SI identifies the industrial surface-mount configuration. ATF22V10C-10SC has the same nominal delay but a different temperature grade, while the -15, -7, and -5 options change propagation delay. Always check the family pinout, supply tolerance, temperature range, and fuse-map compatibility before substitution.

The manufacturer datasheet identifies power dissipation as low as 10 uA typical for the ATF22V10C family. Use the optional power-down function when the board spends substantial time idle, but confirm the actual static and dynamic current in the programmed configuration. Decouple the 5 V supply close to the device with the capacitance recommended in the manufacturer application guidance, and verify operation across the industrial supply range of 4.5 V to 5.5 V.

Keep the 24-SOIC footprint identical when designing a drop-in upgrade path. Place the device away from relay drivers, motor-switching stages, high-current edges, and sources of high-amplitude transients. Route configurable inputs away from parallel high-speed buses where practical, and use the manufacturer's pin-description table to identify supply, ground, control, and configurable terminals. Validate every unused input and output state in both the schematic and the programmed logic.

Budget the full 10 ns propagation delay in every path that crosses the ATF22V10C-10SI, including combinational outputs and registered-output arrangements. Do not remove timing margin merely because the device is described as a control PLD. Check clock, setup, hold, and recovery requirements against the datasheet when registered logic is used, and exercise asynchronous inputs with the latch feature enabled or disabled exactly as required by the final configuration.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, or halogen-free declaration appears in the retrieved device information. The ATF22V10C-10SI is an industrial-temperature logic device; automotive qualification must be confirmed for the exact ordering code before use in automotive production.

Pencarian Terkait

atf22v10c datasheet atf22v10c programming atf22v10c pinout atf22v10c programmable logic device ATF22V10C-10SI datasheet pdf ATF22V10C-10SI 24-SOIC pinout ATF22V10C-10SI equivalent ATF22V10C-10SI replacement ATF22V10C-10SI vs ATF22V10C-15SI ATF22V10C-10SI price Microchip ATF22V10C-10SI ATF22V10C-10SI application circuit

Komponen dan Istilah Terkait

Microchip Technology ATF22V10C-10SI ATF22V10C ATF22V10C-15SI ATF22V10C-7SI ATF22V10C-5SI ATF22V10C-10SC ATF22V10C-15SC electrically erasable programmable logic device EEPLD programmable logic device PLD CMOS logic electrically erasable Flash memory 10 macrocells 500-gate logic capacity 10 ns propagation delay 24-SOIC package SOIC surface-mount package pin-controlled power-down latch feature industrial automation telecommunications line card automotive control module address decoding
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ