ATSAMS70N19B-CN - 300MHz Cortex-M7 MCU | Microchip
N.º de pieza: ATSAMS70N19B-CN ✓ ActivoATSAMS70N19B-CN Descripción general
A flash microcontroller is a semiconductor device that combines a processor core, nonvolatile program memory, data memory, and programmable peripherals on one integrated circuit. The ATSAMS70N19 family belongs to the hierarchy of embedded processors, microcontrollers, ARM Cortex-M microcontrollers, and real-time mixed-signal microcontrollers. This combination places high-speed control, communications, data acquisition, and analog output capabilities within a single device.
The ATSAMS70N19B-CN provides a 300 MHz ARM Cortex-M7 core, 512 KB of Flash, 256 KB of SRAM, 32-bit processing, and a hardware Floating Point Unit. Its 12-bit AFE and 12-bit DAC support applications that require both digital computation and precision analog interfaces. CAN-FD capability makes the device appropriate for industrial networking, while 1.2 V and 3.3 V operating options support both low-voltage digital cores and external peripheral interfaces.
The device uses a 100-pin TFBGA surface-mount package and is offered in a tray configuration. Its operating temperature range is -40 degrees C to +105 degrees C. At 300 MHz, the Cortex-M7 architecture includes the FPU and cache features needed for responsive real-time control, signal processing, communications protocol handling, and human-machine-interface workloads. These capabilities must be balanced against power-management and thermal requirements during system-level frequency selection.
Typical uses include industrial automation controllers, CAN-FD-connected sensor hubs, precision data-acquisition equipment, motor-control systems, and networked industrial gateways. In these systems, the MCU can process real-time measurements, execute control algorithms, and manage communications while its integrated ADC resources and DAC reduce the need for separate analog interface circuitry.
PCB implementation requires careful power, decoupling, clock, and signal-integrity planning in the dense 9 x 9 mm TFBGA footprint. The manufacturer pin-description table should be used to assign every ball, including supply, ground, analog, debug, and communications functions. Review the operating limits and package drawing before finalizing component spacing, routing, and thermal management.
This product page combines manufacturer specifications, package information, sourcing guidance, application-oriented engineering context, and a same-package comparison set. It is designed to help engineers evaluate the ATSAMS70N19B-CN for high-performance embedded and mixed-signal designs without treating the manufacturer product page as a substitute for the complete datasheet, errata, and device-specific application notes.
Alternativas directas para ATSAMS70N19B-CN — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con ATSAMS70N19B-CN (mismo factor de forma y huella) — difiere en Package, SRAM, RoHS Status, Flash Memory, Operating Temperature.
ATSAMS70N19B-CNT
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ATSAMS70N19A-CN
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ATSAMS70N21B-CN
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ATSAME70N19A-CN
✅ Sustitución directaConsulte el precio
Ver hoja de datos →ATSAM3U1CB-CU
✅ Sustitución directaConsulte el precio
Ver hoja de datos →ATSAM4S4CB-CNR
✅ Sustitución directaConsulte el precio
Ver hoja de datos →ATSAMS70N19B-CN Valores máximos y características eléctricas
| Processor Core | ARM Cortex-M7 |
| Architecture | 32-bit |
| Maximum CPU Frequency | 300 MHz |
| Floating Point Unit | Present |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 |
| SRAM | 256 KB |
| ADC Resolution | 12 bits |
| DAC Resolution | 12 bits |
| Connectivity | CAN-FD |
| Supply Voltage Options | 1.2 V and 3.3 V |
| Encapsulado | 100-pin TFBGA, 9 x 9 mm |
| Tipo de montaje | Surface Mount |
| Shipping Package | Tray |
| Rango de temperatura de funcionamiento | -40 degrees C to +105 degrees C |
| Estado RoHS | Compliant |
Guía de configuración de pines de ATSAMS70N19B-CN tray
Configuración de pines para ATSAMS70N19B-CN (encapsulado tray). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para ATSAMS70N19B-CN.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
ATSAMS70N19B-CN es adecuado para 6 aplicacións: Industrial Automation Controller, CAN-FD Sensor Gateway, Precision Data Acquisition, Motor and Motion Control, Industrial Communication Gateway, High-Speed Programmable Logic Controller.
Industrial Automation Controller
The ATSAMS70N19B-CN is well suited to industrial automation controllers because its 300 MHz ARM Cortex-M7 core can execute motion, sequencing, and state-machine logic while the 256 KB of SRAM supports buffers and real-time task data. The 512 KB of Flash provides room for embedded firmware, and CAN-FD connectivity supports communication with networked drives, remote I/O, and machine controllers. Use the 12-bit AFE for sensor conditioning and the 12-bit DAC for actuator references or test signals. The main design consideration is separating analog and digital supply paths while maintaining the low-impedance return network required by the 100-pin TFBGA layout.
Recomendado
CAN-FD Sensor Gateway
The ATSAMS70N19B-CN can consolidate sensor acquisition, local filtering, and CAN-FD gateway functions in one device. Its 300 MHz Cortex-M7 core has sufficient performance for protocol processing, data conditioning, and real-time filtering, while the 512 KB of Flash and 256 KB of SRAM accommodate firmware, message buffers, and diagnostic state. The integrated 12-bit AFE accepts analog sensor channels, and the 12-bit DAC can support excitation, bias, or loopback signals. Engineers should verify transceiver requirements, bus protection, termination, isolation, and deterministic scheduling for the selected CAN-FD network configuration.
Recomendado
Precision Data Acquisition
The ATSAMS70N19B-CN fits precision data-acquisition equipment where an external processor would add cost or board area. Its 12-bit AFE supports analog measurement channels, while the 300 MHz Cortex-M7 and hardware Floating Point Unit accelerate filtering, calibration, and real-time analysis. The 512 KB of Flash can hold application firmware and lookup data, and the 256 KB of SRAM provides working memory for acquisition pipelines. A production design should characterize input bandwidth, reference stability, noise, grounding, and calibration, and should follow the manufacturer layout guidance for separating analog inputs from switching and high-current digital signals.
Recomendado
Motor and Motion Control
The ATSAMS70N19B-CN is suitable for compact motor-control and motion-control subsystems that require deterministic computation, analog feedback, and network communications. The 300 MHz Cortex-M7 can execute current and position-control algorithms, and its Floating Point Unit supports floating-point compensation calculations. The 12-bit AFE can acquire control feedback, the 12-bit DAC can generate reference or excitation signals, and CAN-FD can exchange commands with a higher-level controller. Actual loop performance depends on the selected PWM and timer resources, so pin assignment and peripheral multiplexing must be confirmed before committing the PCB layout.
Recomendado
Industrial Communication Gateway
The ATSAMS70N19B-CN can serve as the processing core of an industrial communication gateway that combines local control with CAN-FD traffic handling. Its 300 MHz ARM Cortex-M7 core supports protocol stacks and event-driven application logic, while 512 KB of Flash and 256 KB of SRAM accommodate firmware and packet buffers. The integrated AFE and DAC make it useful for gateways that also monitor analog plant values or generate test outputs. For deployment, use isolated communication interfaces where required, implement watchdog and fault recovery, and validate EMC immunity under the industrial conditions targeted by the finished equipment.
Recomendado
High-Speed Programmable Logic Controller
The ATSAMS70N19B-CN can implement a high-performance programmable logic controller for equipment requiring fast I/O handling, communications, and local analog control. The 32-bit Cortex-M7 operating at 300 MHz supports concurrent communication and time-critical tasks, while the 512 KB of Flash accommodates a substantial application program and the 256 KB of SRAM supports working state. Its 12-bit AFE and 12-bit DAC extend the controller beyond digital logic into measurement and output functions. Designers should evaluate interrupt latency, timer channels, peripheral multiplexing, and thermal performance at the selected clock and operating voltage.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para ATSAMS70N19B-CN — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | ATSAMS70N19B-CNT | ATSAMS70N19A-CN | ATSAMS70N21B-CN | ATSAME70N19A-CN | ATSAM3U1CB-CU | ATSAM4S4CB-CNR |
|---|---|---|---|---|---|---|---|
| Package | 100-TFBGA (9x9) | 100-TFBGA (9x9) | 100-TFBGA (9x9) | 100-TFBGA (9x9) | 100-TFBGA (9x9) | 100-TFBGA (9x9) | 100-TFBGA (9x9) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Processor Core | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 |
| Maximum CPU Frequency | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz |
Diferenciadores clave
- Combines a 300 MHz Cortex-M7 core with integrated mixed-signal resources (frente a ATSAM3U1CB-CU)
- Higher stated SRAM capacity within the compared listing (frente a ATSAME70N19A-CN)
- Same S70 platform can be evaluated across revision-level ordering codes (frente a ATSAMS70N19A-CN)
- Factory-programmable ordering option supports application-specific production (frente a ATSAMS70N21B-CN)
Notas de diseño
Treat the 100-pin TFBGA as a high-density routing problem. Assign power, ground, analog, clock, debug, and communications balls exclusively from the manufacturer pin-description table, and verify the selected device revision before release. Use short, direct paths for supply and ground connections, place decoupling close to the relevant balls, and preserve the recommended via and escape geometry. Because the package is only 9 x 9 mm, a single routing error can affect multiple peripheral functions.
Keep analog AFE inputs and DAC outputs away from high-speed switching nodes and digital return-current discontinuities. Provide a quiet reference and ground strategy appropriate for the 12-bit conversion functions, and route sensitive signals over a continuous reference plane where possible. Validate attenuation, crosstalk, noise, and settling with the final stack-up. The 300 MHz processor clock can create significant edge-rate activity even when its fundamental frequency is not directly connected to an analog input.
Budget the internal and external power requirements for the 1.2 V core and 3.3 V peripheral domains before selecting regulators and capacitors. Keep the 300 MHz operating point within the device power and thermal limits, and implement a controlled startup sequence for the supply rails. Use the manufacturer power-supply, decoupling, and voltage-regulator recommendations, especially when analog precision and CAN-FD operation depend on stable references.
Do not assume that a shared 100-pin TFBGA package makes two Cortex-M7 microcontrollers interchangeable. Before substituting, compare every ball name, alternate-function mapping, power domain, peripheral instance, interrupt vector, timer channel, communication feature, debug interface, clock input, and programming configuration. Also check the ordering suffix and packing format. The listed alternatives are engineering candidates for review, not automatically approved replacements for an existing production PCB.
Información de cumplimiento
RoHS status is identified as true in the cross-reference listing. No separate REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification claim is established for this ordering code.