ROHM Semiconductor

BD37531FV-E2 - 5-Channel Audio Tone Processor | ROHM

N.º de pieza: BD37531FV-E2 ✓ Activo
7 V to 9.5 V Vdss 28-pin SSOP Package
MOQ: 1 |

BD37531FV-E2 Descripción general

ROHM Semiconductor BD37531FV-E2 is a 5-channel car-audio sound processor with a built-in three-band equalizer, a 7 V to 9.5 V supply range, and an I2C control interface. It is packaged in a 28-pin SSOP and integrates input-gain control, main volume, loudness, fader volume, bass, midrange, treble, mute, and a subwoofer output.

An audio tone processor is an analog signal-chain IC that controls sound characteristics between audio sources and power amplifiers. Within the product hierarchy, it belongs to audio processing, then audio signal conditioning, then integrated circuits. Instead of amplifying speaker currents directly, the BD37531FV-E2 selects and shapes voltage-level audio signals, reducing the number of discrete volume, equalizer, and routing elements required in a car-audio head unit.

Its three-band parametric equalizer adjusts bass, middle, and treble response without external equalizer components. The differential input selector can combine single-ended and differential sources, while the ground-isolation amplifier inputs support external stereo signals. Reduced switching noise in the input-gain, mute, volume, fader, and equalizer paths helps prevent control transitions from producing audible disturbances.

The five-channel architecture supports a main audio path, front and rear fader outputs, and a subwoofer output in a compact implementation. The dedicated subwoofer output saves board space by integrating the associated signal path, while common control software support simplifies development of compatible audio systems. Operation from 7 V to 9.5 V aligns the IC with conventional automotive audio-system supply conditions.

Typical applications include car-audio head units, automotive source units, multimedia systems, and aftermarket radio units. The device is especially useful when a design needs centralized input selection, volume management, loudness compensation, and three-band tone shaping while minimizing external analog components.

Designers should follow the manufacturer pin-description table when assigning PCB tracks and preserve the recommended input and output network values. Decoupling should be placed close to the supply pins, and control-bus layout should minimize switching noise coupling into the audio paths. Confirm the exact SSOP footprint and pin functions against the manufacturer datasheet before releasing artwork.

Alternativas directas para BD37531FV-E2 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

BD37526FV-E2

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 28-SSOP-B
4 channels versus 5 channels, a difference of one channel or 20% fewer processed channels

📋 Alternativa de referencia (no en el catálogo)

BD37521FV-E2

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 28-SSOP-B
4 channels versus 5 channels, a difference of one channel or 20% fewer processed channels

📋 Alternativa de referencia (no en el catálogo)

BD37516FV-E2

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 28-SSOP-B
3 channels versus 5 channels, a difference of two channels or 40% fewer processed channels

📋 Alternativa de referencia (no en el catálogo)

BD37511FV-E2

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 28-SSOP-B
2 channels versus 5 channels, a difference of three channels or 60% fewer processed channels

📋 Alternativa de referencia (no en el catálogo)

BD37506FV-E2

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 28-SSOP-B
2 channels versus 5 channels, a difference of three channels or 60% fewer processed channels

📋 Alternativa de referencia (no en el catálogo)

BD37531FV-E2 Valores máximos y características eléctricas

Product Type Sound processor with built-in three-band equalizer
Output Channel Count 5 channels
Supply Voltage Range 7 V to 9.5 V
Control Interface I2C
Equalizer Bands 3 bands
Equalizer Controls Bass, middle, and treble
Input Selector Single-ended and differential input selection
Ground Isolation Built-in ground isolation amplifier inputs
Volume Controls Main volume and 5-channel fader volume
Additional Control Input gain, mute, and loudness
Subwoofer Output Built-in
Switching Noise Reduction Implemented for input gain, mute, volume, fader volume, bass, middle, and treble
Encapsulado 28-pin SSOP
Package Width 5.60 mm
Application Car audio

Guía de configuración de pines de BD37531FV-E2 5.60 mm

Configuración de pines para BD37531FV-E2 (encapsulado 5.60 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 5.60 mm para BD37531FV-E2

No hay datos detallados de patillaje disponibles para BD37531FV-E2.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

BD37531FV-E2 es adecuado para 6 aplicacións: Automotive Head Units, Car Radio Source Units, In-Car Infotainment Systems, Aftermarket Automotive Audio, Navigation and Voice-Audio Mixing, Automotive Multimedia Amplifier Front Ends.

🚗

Automotive Head Units

The BD37531FV-E2 fits a multi-zone automotive head unit because it combines a 7 V to 9.5 V operating range, five-channel fader control, I2C adjustment, and a three-band equalizer. Place the processor between the source selector and power-amplifier inputs so volume, tone, loudness, and mute can be managed digitally. Its integrated subwoofer path can reduce external routing and board area, while ground-isolation inputs help reject unwanted ground-potential effects in multi-source systems.

📻

Car Radio Source Units

The BD37531FV-E2 is suitable for radio and media source units that need centralized tone and volume processing before power amplification. Its five outputs support distinct zone-routing requirements, while the integrated bass, middle, and treble controls provide adjustable response without a discrete passive equalizer. The I2C interface allows a host controller to apply presets, mute during interruptions, and adjust fader levels while preserving a compact SSOP implementation.

🚙

In-Car Infotainment Systems

The BD37531FV-E2 can serve as the analog tone-control stage in an infotainment system where radio, navigation, media, and voice sources converge. Its differential input selector supports single-ended and differential source combinations, while the ground-isolation amplifier inputs are useful when source grounds are not perfectly matched. Software control through I2C allows different tone and volume profiles to be selected for general listening, navigation prompts, and telephone-audio routing.

🔊

Aftermarket Automotive Audio

The BD37531FV-E2 offers an efficient way to add adjustable tone control and zone management to aftermarket automotive audio systems. Five-channel fader control supports front, rear, and subwoofer-level adjustment, while main volume and loudness functions provide familiar user controls. The integrated subwoofer output can shorten the analog signal path and reduce board complexity, but the implementation should follow the manufacturer application circuit to maintain channel balance and control stability.

🗺️

Navigation and Voice-Audio Mixing

The BD37531FV-E2 can provide the final tone and level-control stage for navigation prompts mixed with music and voice sources. Its input selector allows single-ended or differential source combinations, which helps integrate multiple analog sources without duplicating routing logic. I2C-controlled input gain, mute, fader volume, and equalization allow the host processor to implement priority behavior, such as reducing music briefly during navigation announcements and restoring the prior volume afterward.

📺

Automotive Multimedia Amplifier Front Ends

The BD37531FV-E2 is appropriate for the signal-conditioning front end of a powered automotive multimedia speaker system. It prepares multiple analog channels for power amplifiers by applying input gain, main volume, zone fader settings, loudness compensation, and three-band equalization. The dedicated subwoofer output supports space-constrained designs, while reduced switching noise in the control paths helps minimize disturbance during gain and volume changes. External input and output networks remain essential for impedance and stability.

What is the BD37531FV-E2?
The BD37531FV-E2 is a ROHM Semiconductor 5-channel car-audio sound processor with a built-in three-band equalizer and I2C control. According to the manufacturer datasheet, it combines input selection, input-gain control, main volume, loudness, five-channel fader volume, bass, middle, treble, mute, and a subwoofer output in a 28-pin SSOP package.
What are the key specifications of BD37531FV-E2 that engineers should know?
The BD37531FV-E2 operates from 7 V to 9.5 V and provides five audio channels in a 28-pin SSOP. According to the manufacturer datasheet, its major features include a built-in three-band parametric equalizer, differential and single-ended input selection, ground-isolation inputs, I2C control, five-channel fader control, loudness compensation, and an integrated subwoofer output.
What is the supply voltage of BD37531FV-E2?
The BD37531FV-E2 requires a 7 V to 9.5 V analog supply for its sound-processing functions. According to the manufacturer datasheet, this operating range suits conventional automotive audio electronics while supporting integration with source units and head-unit logic. Board-level implementation should follow the recommended bypass-capacitor and power-routing guidance in the datasheet.
Where can I download the BD37531FV-E2 datasheet PDF?
The BD37531FV-E2 manufacturer datasheet PDF is available from ROHM at the official document link listed on this page. It covers the 28-pin SSOP pin descriptions, electrical characteristics, application circuit, three-band equalizer, input selector, I2C control, and recommended external components. Use the pin-description table when creating the PCB footprint and assigning tracks.
Where can I find the BD37531FV-E2 pinout?
The BD37531FV-E2 uses a 28-pin SSOP, and its authoritative pin assignments are shown in the manufacturer datasheet. The package information identifies the device as a 28-SSOP-B in a 5.60 mm-wide package. Before layout release, map each package pin from the datasheet pin-description table rather than inferring function from neighboring pins.
Where can I buy BD37531FV-E2 online?
The BD37531FV-E2 can be requested through the Request a Quote form on this page. The form is the appropriate route for current unit availability, lot quantity, and delivery scheduling. The manufacturer identifies the part as an automotive sound processor, so attach the required delivery schedule and any automotive qualification requirements to the request.
What is the price of BD37531FV-E2?
Current commercial pricing for the BD37531FV-E2 should be obtained through the Request a Quote form on this page. A quote request allows quantity, date code, and shipment requirements to be evaluated together. It also avoids relying on a historical starting-price figure that may not correspond to the requested order quantity or package variant.
What is the lead time for BD37531FV-E2?
The current lead time for BD37531FV-E2 should be confirmed through the Request a Quote form on this page. Enter the required quantity, target delivery date, and any automotive production schedule so the order can be evaluated against current manufacturing and fulfillment conditions. The manufacturer describes the device as a 5-channel automotive sound processor.
Is BD37531FV-E2 in stock?
Current stock for BD37531FV-E2 should be requested through the Request a Quote form on this page. The form captures the required quantity and delivery timing needed for an inventory response. For production planning, also specify the desired shipment window, traceability requirements, and whether partial delivery would be acceptable.
What can replace BD37531FV-E2?
The closest confirmed same-family option is the base BD37531FV designation, but it must be checked for suffix, packaging, and order-code differences before substitution. No separate pin-compatible replacement is identified by the manufacturer product information. Do not assume that an audio processor with similar equalizer features is drop-in compatible because control mapping, pin assignment, and electrical limits may differ.
Is BD37531FV-E2 the same as BD37531FV?
BD37531FV-E2 and BD37531FV refer to closely related ROHM orderable designations for the sound-processor family, but the suffix must be checked when ordering because it can encode order, packaging, or grade information. According to the manufacturer documentation, both relate to the sound processor with built-in three-band equalizer. Verify the exact suffix against the approved parts list before substitution.
When should I choose BD37531FV-E2 over a discrete audio equalizer?
Choose BD37531FV-E2 when a compact car-audio system needs integrated input selection, three-band equalization, volume, loudness, fader, mute, and subwoofer processing under software control. Its integrated approach can reduce external analog circuitry and simplify board routing. A discrete network may be preferable only when the design requires a different control topology, unusual filter response, or a genuinely lower-cost implementation.
Is BD37531FV-E2 suitable for a car-audio head unit?
Yes, the BD37531FV-E2 is specifically suited to car-audio sound processing and is described by the manufacturer as a sound processor for automotive audio systems. Its five-channel output structure, 7 V to 9.5 V supply range, three-band equalizer, ground-isolation inputs, and I2C interface support a centralized head-unit or source-unit design. Confirm signal levels and external component values against the application circuit.
What is the best cross-brand equivalent for BD37531FV-E2?
No cross-brand equivalent with a confirmed 28-pin SSOP footprint and pin-compatible control interface is established by the manufacturer or replacement records. A similar feature list is not sufficient for drop-in use because audio input routing, register programming, electrical characteristics, and exposed pins must match. Treat the BD37531FV family as the primary sourced replacement path until a specific cross-brand part is validated.
What are the main design considerations for BD37531FV-E2?
The main design priorities are clean power delivery, controlled layout around audio inputs, correct I2C implementation, and use of the manufacturer-recommended external networks. The device uses switched gain, volume, fader, and equalizer controls, so keeping the digital control bus away from sensitive audio traces helps reduce coupling. Use the application circuit and pin-description table as the basis for component selection and PCB routing.

Datos de referencia de ingeniería para BD37531FV-E2 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose BD37531FV-E2 for an automotive audio design that requires integrated five-channel routing, adjustable bass, middle, and treble response, loudness, main and fader volume, mute, and a subwoofer output controlled through I2C. It is particularly useful when board area is constrained and a dedicated subwoofer signal path is needed. A discrete passive equalizer is appropriate when low cost and simple fixed response matter more than software control or flexible input routing. Do not substitute a generic audio codec merely because it also uses I2C; its register map, analog topology, pin assignment, and supply requirements may differ completely. When evaluating the closely related BD37531FV base designation, confirm the exact suffix and packaging requirements against the approved parts list. For any new cross-brand candidate, perform a pin-by-pin and register-by-register comparison rather than relying on feature-list similarity.

Comparación con alternativas

Parámetro Este producto
Product Type Sound processor with built-in three-band equalizer
Brand ROHM Semiconductor
Package 28-pin SSOP, 5.60 mm width
Supply Voltage Range 7 V to 9.5 V
Output Channel Count 5 channels
Equalizer Bands 3 bands: bass, middle, and treble
Control Interface I2C
Input Selection Single-ended and differential input selection
Subwoofer Output Built-in

Diferenciadores clave

  • Five-channel processing with integrated subwoofer output (frente a Discrete three-band passive equalizer network)
  • Software-controlled automotive audio adjustment (frente a Mechanical potentiometer-based tone control)
  • Multiple source-ground and input arrangements (frente a Single-ended-only preamp stage)

Notas de diseño

Follow the manufacturer application circuit for input and output component values, then place those networks close to the associated pins. Keep the I2C traces away from the audio input and output paths, particularly the differential input and ground-isolation sections. The SSOP footprint is only 5.60 mm wide, so verify land patterns, pin numbering, and lead geometry against the package drawing before releasing artwork.

Treat the single-ended and differential inputs as separate high-impedance signal paths. Terminate and bias each source according to the manufacturer reference design, and avoid routing the input network beneath noisy digital or switching nodes. The built-in ground-isolation inputs can reduce common ground-potential problems, but they do not remove the need for a quiet return path or correct source impedance.

Do not assume that another sound processor with bass, treble, and I2C is pin-compatible. Before substituting a part, compare every pin, supply range, control-register implementation, input sensitivity, output topology, and external-network requirement. Also verify the exact order suffix because packing, grade, or delivery-code differences can change what a buyer receives even when the base device designation is similar.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The manufacturer identifies BD37531FV as a sound processor for car audio, but the available product information does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

Datos verificados el: 2026-11-11 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

BD37531FV-E2 datasheet BD37531FV-E2 pinout BD37531FV-E2 datasheet pdf BD37531FV-E2 equivalent BD37531FV-E2 replacement BD37531FV-E2 cross reference BD37531FV-E2 price BD37531FV-E2 stock ROHM BD37531FV-E2 BD37531FV-E2 7V 9.5V I2C BD37531FV-E2 28-SSOP pinout BD37531FV-E2 car audio processor

Componentes & términos relacionados

ROHM Semiconductor BD37531FV-E2 BD37531FV sound processor audio tone processor three-band equalizer parametric equalizer bass control middle control treble control five-channel audio I2C differential input selector ground isolation amplifier subwoofer output car audio automotive head unit loudness control fader volume 28-pin SSOP surface-mount package analog signal processing integrated circuit semiconductor
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ