BD37531FV-E2 - 5-Channel Audio Tone Processor | ROHM
MPN: BD37531FV-E2 ✓ सक्रियBD37531FV-E2 अवलोकन
An audio tone processor is an analog signal-chain IC that controls sound characteristics between audio sources and power amplifiers. Within the product hierarchy, it belongs to audio processing, then audio signal conditioning, then integrated circuits. Instead of amplifying speaker currents directly, the BD37531FV-E2 selects and shapes voltage-level audio signals, reducing the number of discrete volume, equalizer, and routing elements required in a car-audio head unit.
Its three-band parametric equalizer adjusts bass, middle, and treble response without external equalizer components. The differential input selector can combine single-ended and differential sources, while the ground-isolation amplifier inputs support external stereo signals. Reduced switching noise in the input-gain, mute, volume, fader, and equalizer paths helps prevent control transitions from producing audible disturbances.
The five-channel architecture supports a main audio path, front and rear fader outputs, and a subwoofer output in a compact implementation. The dedicated subwoofer output saves board space by integrating the associated signal path, while common control software support simplifies development of compatible audio systems. Operation from 7 V to 9.5 V aligns the IC with conventional automotive audio-system supply conditions.
Typical applications include car-audio head units, automotive source units, multimedia systems, and aftermarket radio units. The device is especially useful when a design needs centralized input selection, volume management, loudness compensation, and three-band tone shaping while minimizing external analog components.
Designers should follow the manufacturer pin-description table when assigning PCB tracks and preserve the recommended input and output network values. Decoupling should be placed close to the supply pins, and control-bus layout should minimize switching noise coupling into the audio paths. Confirm the exact SSOP footprint and pin functions against the manufacturer datasheet before releasing artwork.
के लिए ड्रॉप-इन विकल्प BD37531FV-E2 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
BD37526FV-E2
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
BD37521FV-E2
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
BD37516FV-E2
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
BD37511FV-E2
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
BD37506FV-E2
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
BD37531FV-E2 Maximum Ratings और Electrical Characteristics
| Product Type | Sound processor with built-in three-band equalizer |
| Output Channel Count | 5 channels |
| Supply Voltage Range | 7 V to 9.5 V |
| Control Interface | I2C |
| Equalizer Bands | 3 bands |
| Equalizer Controls | Bass, middle, and treble |
| Input Selector | Single-ended and differential input selection |
| Ground Isolation | Built-in ground isolation amplifier inputs |
| Volume Controls | Main volume and 5-channel fader volume |
| Additional Control | Input gain, mute, and loudness |
| Subwoofer Output | Built-in |
| Switching Noise Reduction | Implemented for input gain, mute, volume, fader volume, bass, middle, and treble |
| पैकेज | 28-pin SSOP |
| Package Width | 5.60 mm |
| Application | Car audio |
BD37531FV-E2 5.60 mm पिन कॉन्फ़िगरेशन गाइड
BD37531FV-E2 (5.60 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: BD37531FV-E2.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
BD37531FV-E2 के लिए उपयुक्त है 6 अनुप्रयोगs: Automotive Head Units, Car Radio Source Units, In-Car Infotainment Systems, Aftermarket Automotive Audio, Navigation and Voice-Audio Mixing, Automotive Multimedia Amplifier Front Ends.
Automotive Head Units
The BD37531FV-E2 fits a multi-zone automotive head unit because it combines a 7 V to 9.5 V operating range, five-channel fader control, I2C adjustment, and a three-band equalizer. Place the processor between the source selector and power-amplifier inputs so volume, tone, loudness, and mute can be managed digitally. Its integrated subwoofer path can reduce external routing and board area, while ground-isolation inputs help reject unwanted ground-potential effects in multi-source systems.
अनुशंसित
Car Radio Source Units
The BD37531FV-E2 is suitable for radio and media source units that need centralized tone and volume processing before power amplification. Its five outputs support distinct zone-routing requirements, while the integrated bass, middle, and treble controls provide adjustable response without a discrete passive equalizer. The I2C interface allows a host controller to apply presets, mute during interruptions, and adjust fader levels while preserving a compact SSOP implementation.
अनुशंसित
In-Car Infotainment Systems
The BD37531FV-E2 can serve as the analog tone-control stage in an infotainment system where radio, navigation, media, and voice sources converge. Its differential input selector supports single-ended and differential source combinations, while the ground-isolation amplifier inputs are useful when source grounds are not perfectly matched. Software control through I2C allows different tone and volume profiles to be selected for general listening, navigation prompts, and telephone-audio routing.
अनुशंसित
Aftermarket Automotive Audio
The BD37531FV-E2 offers an efficient way to add adjustable tone control and zone management to aftermarket automotive audio systems. Five-channel fader control supports front, rear, and subwoofer-level adjustment, while main volume and loudness functions provide familiar user controls. The integrated subwoofer output can shorten the analog signal path and reduce board complexity, but the implementation should follow the manufacturer application circuit to maintain channel balance and control stability.
अनुशंसित
Navigation and Voice-Audio Mixing
The BD37531FV-E2 can provide the final tone and level-control stage for navigation prompts mixed with music and voice sources. Its input selector allows single-ended or differential source combinations, which helps integrate multiple analog sources without duplicating routing logic. I2C-controlled input gain, mute, fader volume, and equalization allow the host processor to implement priority behavior, such as reducing music briefly during navigation announcements and restoring the prior volume afterward.
अनुशंसित
Automotive Multimedia Amplifier Front Ends
The BD37531FV-E2 is appropriate for the signal-conditioning front end of a powered automotive multimedia speaker system. It prepares multiple analog channels for power amplifiers by applying input gain, main volume, zone fader settings, loudness compensation, and three-band equalization. The dedicated subwoofer output supports space-constrained designs, while reduced switching noise in the control paths helps minimize disturbance during gain and volume changes. External input and output networks remain essential for impedance and stability.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा BD37531FV-E2 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद |
|---|---|
| Product Type | Sound processor with built-in three-band equalizer |
| Brand | ROHM Semiconductor |
| Package | 28-pin SSOP, 5.60 mm width |
| Supply Voltage Range | 7 V to 9.5 V |
| Output Channel Count | 5 channels |
| Equalizer Bands | 3 bands: bass, middle, and treble |
| Control Interface | I2C |
| Input Selection | Single-ended and differential input selection |
| Subwoofer Output | Built-in |
मुख्य विशेषताएँ
- Five-channel processing with integrated subwoofer output (बनामDiscrete three-band passive equalizer network)
- Software-controlled automotive audio adjustment (बनामMechanical potentiometer-based tone control)
- Multiple source-ground and input arrangements (बनामSingle-ended-only preamp stage)
डिज़ाइन नोट्स
Follow the manufacturer application circuit for input and output component values, then place those networks close to the associated pins. Keep the I2C traces away from the audio input and output paths, particularly the differential input and ground-isolation sections. The SSOP footprint is only 5.60 mm wide, so verify land patterns, pin numbering, and lead geometry against the package drawing before releasing artwork.
Treat the single-ended and differential inputs as separate high-impedance signal paths. Terminate and bias each source according to the manufacturer reference design, and avoid routing the input network beneath noisy digital or switching nodes. The built-in ground-isolation inputs can reduce common ground-potential problems, but they do not remove the need for a quiet return path or correct source impedance.
Do not assume that another sound processor with bass, treble, and I2C is pin-compatible. Before substituting a part, compare every pin, supply range, control-register implementation, input sensitivity, output topology, and external-network requirement. Also verify the exact order suffix because packing, grade, or delivery-code differences can change what a buyer receives even when the base device designation is similar.
अनुपालन जानकारी
The manufacturer identifies BD37531FV as a sound processor for car audio, but the available product information does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.