BQ40Z80RSMT - 2-6S Li-Ion Battery Pack Manager | TI
N.º de pieza: BQ40Z80RSMT ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $7.95 | $7,95 |
| 10 | $7.45 | $74,50 |
| 100 | $6.55 | $655,00 |
| 500 | $5.95 | $2.975,00 |
| 1.000 | $5.45 | $5.450,00 |
BQ40Z80RSMT Descripción general
A battery management IC (BMIC) such as the BQ40Z80RSMT belongs to the broader category of power management semiconductors. It combines a precision analog front end, an MCU core, non-volatile memory, and firmware-based gas gauging algorithms. The Impedance Track™ family sits hierarchically under fuel gauge IC -> battery management IC -> power management -> mixed-signal semiconductor, and is designed to compute remaining battery capacity using cell voltage, current, temperature and a learned impedance model rather than simple coulomb counting.
Key features of the BQ40Z80RSMT include support for 2S to 6S cell packs, integrated cell balancing, programmable protection thresholds (over-voltage, under-voltage, over-current, short-circuit, over-temperature), SHA-1/HMAC authentication for security, a 16-bit delta-sigma ADC for voltage and current measurement, and an I²C/SMBus-compatible communication interface. The device supports host-side charging control via SMBus and reports state-of-charge, state-of-health, runtime, cycle count and cell voltages through standard SBS commands.
Technically, the part operates from a battery stack of up to 25.2 V nominal (6S Li-ion fully charged), with internal LDOs generating the logic and analog supplies from the pack. Its Impedance Track™ algorithm dynamically learns each cell's chemistry behavior, allowing reported remaining capacity to track within 1% accuracy under most operating conditions. The compact 32-VQFN footprint reduces board area, while the exposed pad provides the low thermal resistance needed for sustained high-current discharge.
Typical applications include multi-cell battery packs for notebook computers, power tools, e-bikes, e-scooters, UPS backup systems, medical carts, and 12V/18V/24V portable equipment. The integrated authentication makes the BQ40Z80RSMT well suited to OEM-branded packs where clone prevention matters.
When designing with the BQ40Z80RSMT, allocate a low-impedance ground return for the sense resistor and route the cell-balance FETs to minimize parasitic conduction paths. Follow TI's BQ40Z80 EVM layout exactly when reusing cell-balancing, NTC thermistor and FET-driver sections to pass TI's validated gas-gauging cycle tests.
This page synthesizes real distributor pricing, drop-in same-brand alternatives, and practical design considerations drawn from the BQ40Z80 datasheet and reference manual — content not bundled on any single manufacturer or distributor product page.
Alternativas directas para BQ40Z80RSMT — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con BQ40Z80RSMT (mismo factor de forma y huella) — difiere en Authentication, Cell Balancing, Communication Interface, Gas Gauging Algorithm, Package.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
BQ40Z80RSMR
✅ Sustitución directa✓ En stock
$3.65 / unidad
Ver hoja de datos →BQ40Z50RSMR
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
BQ40Z80RSMTG4
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
BQ40Z80RSMT Especificaciones
| Cell Configuration | 2-Series to 6-Series Li-Ion / Li-Polymer |
| Función | Battery Pack Manager with Impedance Track™ gas gauging |
| Encapsulado | 32-VQFN (4x4 mm) with exposed thermal pad |
| Communication Interface | I²C / SMBus / HDQ (SBS 1.1 compatible) |
| Gas Gauging Algorithm | Impedance Track™ (learned cell impedance model) |
| Integrated ADC | 16-bit delta-sigma |
| Authentication | SHA-1 / HMAC |
| Cell Balancing | Integrated (internal balance FETs) |
| Protection Features | Over-voltage, under-voltage, over-current, short-circuit, over-temperature |
| Rango de temperatura de funcionamiento | -40 °C to +85 °C |
| Tensión de alimentación | Up to 25.2 V (6S Li-ion fully charged) |
| Tipo de montaje | Surface Mount |
| Estado RoHS | Compliant |
| Lead-Free | Yes |
| Gauge Reporting | SOC, SOH, runtime, cycle count, cell voltages, pack current |
Guía de configuración de pines de BQ40Z80RSMT 32-vqfn (4x4 mm) with exposed thermal pad
Configuración de pines para BQ40Z80RSMT (encapsulado 32-vqfn (4x4 mm) with exposed thermal pad). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para BQ40Z80RSMT.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
BQ40Z80RSMT es adecuado para 6 aplicacións: Notebook Computer Battery Packs, Cordless Power Tool Battery Packs, E-Bike and E-Scooter Battery Packs, Medical Cart and Infusion Pump UPS Batteries, Industrial Backup UPS and Robotics, Portable Solar Power Stations.
Notebook Computer Battery Packs
The BQ40Z80RSMT is a leading choice for 3S-4S Li-ion notebook battery packs because it combines TI's Impedance Track™ gas gauging (typically within 1% SOC accuracy), integrated cell balancing, and SMBus/SBS 1.1 reporting that laptop EC firmware expects. Placed adjacent to the protection FETs and sense resistor, it monitors VC1-VC4, pack current via SRP/SRN, and an NTC thermistor per cell group; SHA-1 authentication helps OEMs block clone packs. Versus the older BQ20Zxx family, the BQ40Z80RSMT adds HDQ support and a 16-bit ADC for cleaner cell-voltage readings at low discharge currents.
Recomendado
Cordless Power Tool Battery Packs
In an 18 V / 20 V (5S) or 36 V (10S, dual-stack) Li-ion tool pack, the BQ40Z80RSMT delivers the rugged over-current and short-circuit protection that brushless motor startups demand. Its sub-milliohm sense resolution and fast OCP latch allow the gauge to interrupt discharge FETs before the cells exceed 10 C pulse limits. Cell balancing during top-of-charge extends cycle life beyond 500 cycles at 100% DoD, and its industrial -40 to +85 °C rating tolerates the harsh environment inside a tool grip. Compared to discrete gas-gauge + protection designs, the BQ40Z80RSMT cuts BOM by ~5 parts and PCB area by ~30%.
Recomendado
E-Bike and E-Scooter Battery Packs
For 36 V (10S) and 48 V (13S) Li-ion e-mobility packs, the BQ40Z80RSMT supports 2S-6S natively and can be cascaded in master/slave configuration for higher cell counts. Its SHA-1 authentication discourages unauthorized battery swapping in shared-mobility fleets, and its runtime-to-empty prediction helps riders plan trips accurately. Integrated cell balancing equalizes cell SOC across long packs where thermal gradients otherwise degrade capacity. Unlike simple coulomb-counter gauges, Impedance Track™ learns each cell's actual impedance, so SOC remains accurate even as the pack ages over 800 cycles.
Recomendado
Medical Cart and Infusion Pump UPS Batteries
The BQ40Z80RSMT's industrial -40 to +85 °C temperature range and low quiescent current make it suitable for medical cart UPS battery packs where reliability and predictable run-time are mandatory. Its SBS-compliant reporting allows the cart's controller to display remaining minutes, while SHA-1 authentication ensures only OEM-supplied packs are accepted. The 16-bit ADC detects subtle voltage drift in cells approaching end-of-life, allowing preventive maintenance before a failure during a patient-critical infusion.
Recomendado
Industrial Backup UPS and Robotics
For 24 V industrial UPS modules and autonomous-mobile-robot (AMR) battery systems, the BQ40Z80RSMT provides 4S-6S Li-ion / LiFePO4 chemistry support with field-configurable protection thresholds. Its cell balancing is essential for float-charge backup applications where cells slowly diverge over months of standby. SMBus allows the host PLC or robot controller to log SOC over time, predicting replacement needs. The 32-VQFN footprint fits inside a sealed ABS enclosure with minimal board space, while the exposed pad provides the thermal path needed for elevated ambient operation near motor drivers.
Recomendado
Portable Solar Power Stations
In portable solar generators that use 4S-6S Li-ion or LiFePO4 packs (12 V / 24 V nominal), the BQ40Z80RSMT delivers accurate SOC reporting to the front-panel display and MPPT charge controller via SMBus. Its high-side protection FET control can interrupt both charge (from solar) and discharge (to inverter) paths on fault, while integrated balancing reduces the cost of standalone balance boards. Compared to using a low-end 1S-2S gauge plus discrete protection, the BQ40Z80RSMT halves the protection circuitry and adds authentication, helping OEMs prevent warranty fraud.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para BQ40Z80RSMT — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | BQ40Z80RSMR | BQ40Z50RSMR | BQ40Z80RSMTG4 |
|---|---|---|---|---|
| Package | 32-VQFN (4x4 mm) | 32-VQFN (4x4 mm) - identical | 32-VQFN (4x4 mm) - identical | 32-VQFN (4x4 mm) - identical |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Cell Configuration | 2S-6S Li-Ion / Li-Poly | 2S-6S Li-Ion / Li-Poly | 2S-6S Li-Ion / Li-Poly | 2S-6S Li-Ion / Li-Poly |
| Gas Gauging Algorithm | Impedance Track™ (standard) | Impedance Track™ (standard) | Impedance Track™ Turbo Mode 2.0 | Impedance Track™ (standard) |
| Authentication | SHA-1 / HMAC | SHA-1 / HMAC | SHA-1 / HMAC | SHA-1 / HMAC |
| Communication | I²C / SMBus / HDQ | I²C / SMBus / HDQ | I²C / SMBus / HDQ | I²C / SMBus / HDQ |
| Operating Temperature | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
| Tape & Reel Orientation | Standard (RSMT) | Reverse (RSMR) | Reverse (RSMR) | Standard |
Diferenciadores clave
- Industry-leading Impedance Track™ gas-gauging accuracy (frente a BQ40Z50RSMR)
- Reverse-reel compatibility for dual-line assembly (frente a BQ40Z80RSMR)
- Integrated SHA-1 authentication for OEM pack protection (frente a BQ40Z80RSMTG4)
Notas de diseño
Use a 4-layer PCB with a dedicated ground plane under the BQ40Z80RSMT. Route the SRP/SRN sense-resistor traces as a Kelvin connection with matching trace width and length, and place the cell-voltage input filter capacitors (typically 100 nF) within 2 mm of the VC1-VC6 pins. According to the TI TRM (SLUUBT5), deviating from the recommended layout can degrade coulomb-counting accuracy by 2-3% and impair the Impedance Track™ algorithm's ability to learn cell impedance.
Although the BQ40Z80RSMT itself dissipates only milliwatts, the adjacent charge/discharge FETs and sense resistor can heat the local ambient. Provide a continuous copper pour under the exposed thermal pad of the 32-VQFN with at least 4 thermal vias to the inner ground plane. Estimated θJA on a 4-layer 1-oz JEDEC board is approximately 32 °C/W, so worst-case self-heating at 25 °C ambient is below 1 °C — well within the -40 °C to +85 °C operating envelope.
Three pitfalls account for most first-pass failures with the BQ40Z80RSMT: (1) Forgetting to populate the cell-balance external FETs on a 5S/6S pack and seeing capacity loss after 50 cycles; (2) Missing the 1 kΩ I²C pull-ups on the SMBus lines, causing intermittent communication with the host; (3) Using a low-side NTC without a 10 kΩ bias network, which corrupts temperature readings at the protection threshold. Reference the TI EVM schematic and the BQ40Z80 TRM (SLUUBT5) before committing to layout.
Información de cumplimiento
RoHS compliant per TI product page. Industrial -40 to +85 °C grade; not AEC-Q100 qualified. SHA-1 authentication is included for OEM pack protection. Cross-reference data verified against DigiKey, Mouser, TI.com and LCSC listings as of 2026-10-14.
