C8051F384-GQ - 48 MIPS 64KB Flash 8051 MCU | Silicon Labs
N.º de pieza: C8051F384-GQ ✓ ActivoC8051F384-GQ Descripción general
An 8051 microcontroller is an embedded processing device built around the widely established 8051 instruction set and peripheral architecture. Within the embedded-control hierarchy, the C8051F38x combines a CISC-compatible core, integrated flash, digital communication peripherals, and mixed-signal resources on one semiconductor package. This integration allows control boards to handle acquisition, communication, and local actuation without requiring a separate external memory.
Key features include a 48 MIPS processing rate, 64KB organized as 64K x 8 of flash, 4.25K x 8 of RAM, operation from a 2.7 V to 5.25 V supply, and a 2.5 V or 3.3 V interface designation. The device is offered in a surface-mount 48-TQFP package, providing 48 external pins for power, clock, reset, programming, communications, and application-specific signals.
The C8051F38x architecture is suited to control-oriented products where predictable firmware execution, moderate data storage, and integrated peripherals are more important than a high-level operating system. Its 64KB flash capacity accommodates substantially more code than many compact 8-bit controllers, while the 48 MIPS rate provides useful timing margin for protocol handling, sampling routines, and multi-peripheral coordination.
Typical uses include industrial data-acquisition modules, USB-connected control products, communications equipment, digital instrumentation, and compact embedded controllers. The device can also support peripheral bridging when paired with an appropriate interface controller, such as an RS-232 transceiver or Ethernet interface, while retaining a dedicated real-time control function.
Hardware design should account for the device's 48-pin TQFP footprint, exposed power and ground connections, clock requirements, programming interface, and the operating voltage selected for the system. Use the manufacturer datasheet pin-description and electrical-characteristics tables when assigning tracks, selecting bypass capacitors, and validating signal levels.
This product page organizes the C8051F384-GQ specifications, verified source information, practical application guidance, and available drop-in comparisons. It also helps engineers distinguish exact package-compatible alternatives from related devices that differ materially in memory, pinout, peripherals, or software support.
Alternativas directas para C8051F384-GQ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con C8051F384-GQ (mismo factor de forma y huella) — difiere en Package, Product Type.
C8051F384-GQR
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
C8051F380-GQ
✅ Sustitución directaConsulte el precio
Ver hoja de datos →C8051F386-GQ
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
C8051F384-GQ Valores máximos y características eléctricas
| Product Type | 8-bit 8051 CISC microcontroller |
| Series | C8051F38x |
| Maximum Execution Rate | 48 MIPS |
| Clock Frequency | 48 MHz |
| Flash Memory | 64KB (64K x 8) |
| RAM | 4.25K x 8 |
| Supply Voltage Range | 2.7 V to 5.25 V |
| Interface Voltage | 2.5 V or 3.3 V |
| Architecture | 8-bit 8051 CISC |
| Encapsulado | 48-TQFP (7 x 7 mm) |
| Recuento de pines | 48 pins |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de C8051F384-GQ 48-tqfp (7 x 7 mm)
Configuración de pines para C8051F384-GQ (encapsulado 48-tqfp (7 x 7 mm)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para C8051F384-GQ.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
C8051F384-GQ es adecuado para 6 aplicacións: Industrial Data Acquisition, USB Communication Controller, Digital Instrumentation, Communications Equipment, Embedded Control Module, Security and Access Controller.
Industrial Data Acquisition
The C8051F384-GQ fits compact industrial acquisition controllers because its 48 MIPS 8051-compatible core provides deterministic control performance while 64KB of flash leaves room for acquisition routines, calibration logic, and communications firmware. Its 4.25K x 8 RAM supports working buffers without forcing a separate memory component. The 48-TQFP footprint also exposes the device's mixed-signal and digital resources for sensor conditioning, digital I/O, and local status handling. The principal design consideration is confirming that the selected C8051F38x variant includes every required ADC, timer, and interface resource; the C8051F38x datasheet provides the authoritative peripheral and electrical limits.
Recomendado
USB Communication Controller
The C8051F384-GQ can serve as the principal controller in a compact USB or mixed-communication product because the 48 MIPS execution rate supports protocol state machines alongside real-time control tasks. Its 64KB flash accommodates firmware, configuration tables, and USB descriptors, while 4.25K x 8 RAM is available for packet buffers. The 2.7 V to 5.25 V operating range supports integration with 3.3 V or 5 V system rails. Design the USB interface around the exact device pin assignments and required transceiver or controller support stated in the manufacturer documentation, and validate enumeration behavior across the intended host platforms before production release.
Recomendado
Digital Instrumentation
The C8051F384-GQ is appropriate for digital meters, process indicators, and laboratory instruments that combine front-panel control with communication. Its 48 MIPS rate permits responsive keypad and display management while the 64KB flash supports menus, calibration coefficients, measurement algorithms, and field-upgrade logic. The 48-pin TQFP package provides more external connections than a small 32-pin device, helping consolidate sensing, communication, and control functions. Because accuracy ultimately depends on the selected analog resources and reference design, verify ADC resolution, acquisition timing, input impedance, and calibration strategy in the manufacturer datasheet before fixing the component in a precision instrument.
Recomendado
Communications Equipment
The C8051F384-GQ can act as the supervisory controller in a communications module where deterministic execution, local protocol handling, and nonvolatile code storage are required. The 48 MIPS rating supports time-critical framing and routing tasks, while 64KB of flash permits layered communication firmware and configuration data. The device operates from a 2.7 V to 5.25 V supply and is available in a surface-mount 48-pin package suitable for compact network and serial-interface products. Engineers should match the exact UART, timer, clock, and I/O resources to the link standard, preserve required pin functions during layout, and test timing margin under maximum bus traffic and specified temperature conditions.
Recomendado
Embedded Control Module
The C8051F384-GQ suits embedded control modules that combine local actuation with configurable digital I/O and optional serial communications. Its 48 MIPS 8051-compatible execution rate provides useful throughput for sequencing and supervisory tasks, while 64KB of flash supports application logic and parameter storage. The 48-TQFP package allows compact surface-mount assembly without an external memory device. For motor, valve, or relay control designs, use the device's timer and I/O capabilities only after checking maximum pin transition rates and supply-current behavior in the datasheet. Add suitable protection, grounding, and isolation according to the driven-load environment rather than treating microcontroller logic pins as unrestricted power outputs.
Recomendado
Security and Access Controller
The C8051F384-GQ can support compact access-control and security modules where local logic, event handling, and communications must operate predictably. The 48 MIPS 8051 core can supervise sensors, debounce inputs, manage actuator sequences, and maintain protocol state, while 64KB of flash accommodates control firmware and configuration records. Its 2.7 V to 5.25 V supply range enables integration across common low-voltage systems. Security-critical designs should add the required authentication, tamper response, secure storage, and certificate or key-management functions rather than relying on general-purpose controller firmware alone. Review watchdog behavior, clock accuracy, supply sequencing, and all exposed debug or programming interfaces before approving the hardware for deployment.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para C8051F384-GQ — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | C8051F384-GQR | C8051F380-GQ | C8051F386-GQ |
|---|---|---|---|---|
| Package | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Processor Class | 8-bit 8051 CISC | 8-bit 8051 CISC | 8-bit 8051 CISC | 8-bit 8051 CISC |
| Pin Count | 48 pins | 48 pins | 48 pins | 48 pins |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount |
| Ordering Format | C8051F384-GQ | Reel format | GQ ordering suffix | GQ ordering suffix |
Diferenciadores clave
- Exact same-device ordering option (frente a C8051F384-GQR)
- Identical stated core throughput and memory class (frente a C8051F380-GQ)
- Broader package-connected design margin (frente a C8051F38C-GQ)
Notas de diseño
Route the 48-TQFP footprint directly from the manufacturer land pattern and complete pin table; do not infer assignments from another C8051F38x member. Keep decoupling and ground-return paths compact, and preserve every power and ground connection specified by the device. Because the package offers no thermal-pad treatment comparable to a leadless package, route heat-sensitive return currents away from sensitive analog and timing nodes.
Design the supply rail for the documented 2.7 V to 5.25 V operating range and the selected 2.5 V or 3.3 V interface environment. Place the required bulk and bypass capacitors at the power pins with short, low-impedance return paths, and verify startup, steady-state ripple, and load-transient behavior at both the minimum and maximum intended supply voltages.
Do not treat C8051F380-GQ or C8051F386-GQ as automatic software- and pin-compatible replacements merely because their listings identify a 48-pin TQFP package. Compare the complete pin table, clock configuration, memory map, peripheral inventory, electrical limits, and programming procedure for the exact selected MPN. If those checks do not pass, use C8051F384-GQR as the same-device format alternative.
Use short clock routes, a deliberate grounding strategy, and controlled impedance where external buses are present. Keep programming and debug signals away from sensitive analog inputs, and avoid long copper stubs around communication interfaces. Validate timing using the manufacturer's maximum clock and operating-voltage conditions rather than relying only on typical performance.
Información de cumplimiento
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were identified for the exact ordering code. The AEC-Q100 field remains unknown because automotive qualification was not stated.