onsemi

CD4060BCM - 14-Stage Binary Counter | onsemi | SOIC-16

N.º de pieza: CD4060BCM ✓ Activo
15 V maximum Vdss 16-pin SOIC Package Negative edge Speed
MOQ: 1 |

CD4060BCM Descripción general

The onsemi CD4060BCM is a 14-stage ripple-carry binary counter and divider in a 16-pin SOIC package. It advances its count on the negative transition of each clock pulse and provides binary counter outputs for frequency division, timing, and clock-generation applications. The device is identified as a 14-bit, single-element, negative-edge counter IC, making it suitable for low-to-medium-frequency timing and divider circuits.

A binary counter is a sequential logic device that records a number of clock transitions and presents that count through digital output stages. The CD4060B family combines a 14-stage ripple-carry counter with oscillator capability, placing it within the hierarchy of CMOS logic IC, counter/divider, digital logic, and semiconductor timing devices. Its negative-edge clock response and fixed divide stages help designers produce predictable frequency relationships from an input clock.

The CD4060BCM is specified as a 4000-series CMOS counter/divider with a 16-pin SOIC format. Its operating temperature range is listed as -55°C to +125°C in the manufacturer-related datasheet information, making it suitable for industrial temperature environments when the circuit's voltage and timing requirements are met. The counter structure supports applications requiring binary-coded timing information, such as programmable timers, delay generators, pulse-rate dividers, and clocked sequencing systems.

The CD4060BCM uses negative-edge clocking, so the output state changes when the clock input transitions from high to low. In a practical implementation, the oscillator section may use external resistors and a capacitor, or an external clock may drive the counter. Designers should account for ripple propagation across the 14 stages when the outputs are used as a coherent binary word, and should preserve adequate clock and output rise times in long-chain timing applications.

Typical uses include industrial timer modules, frequency-divider circuits, pulse-counting instrumentation, periodic event generation, and embedded control systems requiring a compact binary counter. Because the CD4060BCM is a CMOS counter/divider rather than a general-purpose microcontroller, it can reduce firmware overhead when a fixed counter and divider function is sufficient. It is also useful as a building block in legacy CMOS designs where a known 16-pin SOIC footprint and established CD4060B behavior simplify maintenance.

For new layouts, place decoupling capacitors close to the power pins and route clock and oscillator traces away from noisy switching nodes. Verify the allowable supply voltage, oscillator component tolerances, maximum clock frequency, and output load against the manufacturer datasheet before production. The CD4060BCM is best suited to designs that need deterministic binary counting rather than programmable arithmetic or bidirectional counting.

This product page combines the manufacturer's counter description, package and temperature information, compatibility-oriented alternatives, and application-specific engineering guidance to support faster component selection and PCB design. It also highlights the distinction between a fixed CMOS ripple counter/divider and more programmable timing devices.

Alternativas directas para CD4060BCM — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con CD4060BCM (mismo factor de forma y huella) — difiere en Counter Resolution, Logic Family, Package, Product Type.

Texas Instruments
Logic Family: CMOS
Comparar con CD4060BCM →
Texas Instruments
Counter Resolution: 14 bit
Package: 16-lead SOIC
Product Type: CMOS 14-stage ripple-carry binary counter/divider and oscillator
Comparar con CD4060BCM →

CD4060BMG4

✅ Sustitución directa
📦 16-pin SOIC
Same 14-stage CD4060B counter function and 16-pin SOIC terminal arrangement; ordering and temperature-grade details must be checked.

📋 Alternativa de referencia (no en el catálogo)

CD4060BCMX

✅ Sustitución directa
📦 16-pin SOIC
Same CD4060B 14-bit counter/divider function and 16-pin SOIC footprint; manufacturer, grade, and ordering suffix differ.

📋 Alternativa de referencia (no en el catálogo)

CD4060BMT

✅ Sustitución directa
Texas Instruments
📦 16-pin SOIC
CMOS 14-stage ripple-carry binary counter/divider and oscillator · 1 element · 14 stages · 14 bit · Negative edge · RC or crystal oscillator · Resets counter outputs to the all-zero state and disables the oscillator · High level

Consulte el precio

Ver hoja de datos →

CD4060BM

✅ Sustitución directa
Texas Instruments
📦 16-pin SOIC
14-stage ripple-carry binary counter/divider · CMOS · 1 element · 14 bit · Negative edge · 3 V to 18 V · 24 MHz · RC or crystal oscillator circuit support

Consulte el precio

Ver hoja de datos →

CD4060BCM Valores máximos y características eléctricas

Product Type 14-stage ripple-carry binary counter/divider
Logic Family 4000-series CMOS
Number of Counter Stages 14 stages
Counter Resolution 14 bits
Counter Elements 1 element
Clock Edge Negative edge
Tensión de alimentación 15 V maximum
Rango de temperatura de funcionamiento -55°C to +125°C
Encapsulado 16-pin SOIC
Número de pines 16 pins
Tipo de montaje Surface mount
Logic Type Binary counter/divider
Oscillator Function RC oscillator capable
Configuración de salida Binary counter outputs

Configuración de pines de CD4060BCM

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
Pin 1 [DATA_NEEDED: pin 1 name] — Consult the manufacturer datasheet pin-description table before assigning the PCB net.
Pin 2 [DATA_NEEDED: pin 2 name] — Consult the manufacturer datasheet pin-description table before assigning the PCB net.
Pin 3 [DATA_NEEDED: pin 3 name] — Consult the manufacturer datasheet pin-description table before assigning the PCB net.
Pin 4 [DATA_NEEDED: pin 4 name] — Consult the manufacturer datasheet pin-description table before assigning the PCB net.
Pin 5 [DATA_NEEDED: pin 5 name] — Consult the manufacturer datasheet pin-description table before assigning the PCB net.
Pin 6 [DATA_NEEDED: pin 6 name] — Consult the manufacturer datasheet pin-description table before assigning the PCB net.
Pin 7 [DATA_NEEDED: pin 7 name] — Consult the manufacturer datasheet pin-description table before assigning the PCB net.
Pin 8 [DATA_NEEDED: pin 8 name] — Consult the manufacturer datasheet pin-description table before assigning the PCB net.
Pin 9 [DATA_NEEDED: pin 9 name] — Consult the manufacturer datasheet pin-description table before assigning the PCB net.
Pin 10 [DATA_NEEDED: pin 10 name] — Consult the manufacturer datasheet pin-description table before assigning the PCB net.
Pin 11 [DATA_NEEDED: pin 11 name] — Consult the manufacturer datasheet pin-description table before assigning the PCB net.
Pin 12 [DATA_NEEDED: pin 12 name] — Consult the manufacturer datasheet pin-description table before assigning the PCB net.
Pin 13 [DATA_NEEDED: pin 13 name] — Consult the manufacturer datasheet pin-description table before assigning the PCB net.
Pin 14 [DATA_NEEDED: pin 14 name] — Consult the manufacturer datasheet pin-description table before assigning the PCB net.
Pin 15 [DATA_NEEDED: pin 15 name] — Consult the manufacturer datasheet pin-description table before assigning the PCB net.
Pin 16 [DATA_NEEDED: pin 16 name] — Consult the manufacturer datasheet pin-description table before assigning the PCB net.

Aplicaciones típicas

CD4060BCM es adecuado para 6 aplicacións: Programmable Timer Module, Frequency Divider, Industrial Pulse Counter, Periodic Event Generator, Clocked Sequencing System, Oscillator-Based Timebase.

⚡

Programmable Timer Module

The onsemi CD4060BCM fits a programmable timer module because it combines a 14-stage binary counter with oscillator capability in a 16-pin SOIC package. It can establish a timing cadence with external resistor-capacitor components and present elapsed-count information through binary outputs. This removes a microcontroller and its firmware from simple interval or delayed-event tasks, reducing board complexity. The design must follow the manufacturer oscillator values, verify start-up behavior, and include tolerance analysis for the timing components. Reset should be controlled so that the counter begins from a defined state after power-up.

🌐

Frequency Divider

The CD4060BCM is appropriate for a fixed frequency-divider circuit because its 14 ripple-carry stages advance on each negative clock transition and expose multiple binary outputs. A designer can select an appropriate output stage to obtain the required division relationship while avoiding the overhead of a programmable digital timer. The key performance checks are maximum input frequency, propagation delay, output rise and fall time, and the capacitive load presented by downstream logic. Keep clock traces short and use Schmitt-triggered interfacing where an external signal crosses significant noise or slow-edge conditions.

🏭

Industrial Pulse Counter

The CD4060BCM can serve as the timing backbone of an industrial pulse counter by counting negative clock transitions and presenting a 14-bit binary state. Its listed -55°C to +125°C operating range supports operation across demanding industrial temperature conditions when the complete circuit meets the applicable supply and timing requirements. Use an input conditioning stage for noisy or slow edges, and treat the binary outputs as a ripple-derived word when downstream circuitry samples multiple stages at once. Reset and isolation logic should establish clear startup and fault-recovery behavior.

🔧

Periodic Event Generator

The CD4060BCM is well suited to periodic event generation because a selected counter stage can produce a divided clock from an internal oscillator or external source. That divided signal can trigger sampling, relay sequencing, flashing indicators, or a downstream actuator at a predictable interval. Component tolerances and temperature drift determine the achievable timing accuracy, so select external timing parts according to the manufacturer oscillator guidance. At the output, pulse shaping may be required because ripple timing and finite transition times influence when a downstream device recognizes each event.

🖥️

Clocked Sequencing System

The CD4060BCM can provide the binary count state for clocked sequencing in legacy control and instrumentation systems. Each negative-edge clock transition advances the state, allowing external decode logic to select one of several timing phases or steps. Its fixed hardware sequence is useful when firmware overhead is undesirable and the operation can be predetermined. Designers should account for the ripple nature of the counter, add reset qualification to avoid metastable startup behavior, and ensure each decoded output remains stable long enough for the connected logic to respond.

⏱️

Oscillator-Based Timebase

The CD4060BCM can serve as an oscillator-based timebase when external timing components establish the operating frequency and the counter provides selectable divided outputs. This arrangement is useful in low-cost timers, sampling clocks, and repetitive control systems that require more than a free-running oscillator but do not need programmable arithmetic. The oscillator's starting behavior, frequency range, and component tolerances should be checked against the manufacturer datasheet. For stable production timing, account for component temperature coefficients and provide generous margins around the intended output frequency.

What is CD4060BCM?
The CD4060BCM is a 14-stage ripple-carry binary counter and divider with a 14-bit output, negative-edge clocking, and a 16-pin SOIC package. According to the Fairchild Semiconductor CD4060BCM datasheet information, the CD4060B advances one count on the negative transition of each clock pulse and can also provide oscillator-based timing. It is suited to frequency division, binary timing, delayed events, and fixed-count applications.
What are the key specifications of CD4060BCM?
The CD4060BCM is a 4000-series CMOS binary counter/divider with 14 ripple-carry stages, 14-bit resolution, negative-edge operation, and a 16-pin SOIC package. Manufacturer-related documentation lists a maximum supply voltage of 15 V and an operating-temperature range of -55°C to +125°C. Its architecture combines a counter with oscillator capability, allowing either an external timing clock or an RC timing network to establish the operating cadence.
Where can I download the CD4060BCM datasheet PDF?
The CD4060BCM datasheet PDF can be accessed through the manufacturer-documentation links on this page, including the Fairchild Semiconductor datasheet record. The document identifies the device as a 14-stage ripple-carry binary counter and explains its negative-edge counting behavior. Use the pin-description and electrical-characteristics tables when assigning supply rails, oscillator components, clock limits, and output loads.
Where can I find the CD4060BCM pinout?
The CD4060BCM pin assignment is documented in the 16-pin SOIC pin-description table of the manufacturer datasheet. The package includes clock and oscillator connections, reset control, supply, ground, and multiple binary counter outputs. Assign PCB nets directly from that table and preserve the standard counterclockwise SOIC numbering used by the package diagram.
What is the difference between CD4060BCM and CD4060BMG4?
The CD4060BCM and CD4060BMG4 share the 16-pin SOIC counter/divider format and the same CD4060B functional architecture. The manufacturer cross-reference information describes their terminals, packages, functional characteristics, and principal performance parameters as consistent. A production substitution should still be checked for temperature grade, supply limits, clock frequency, marking, and purchasing configuration before approval.
Can CD4060BCMX replace CD4060BCM?
The CD4060BCMX is a CD4060B-family 16-pin SOIC counter/divider and can serve as a functional replacement when its temperature grade and ordering configuration satisfy the design. The cross-reference material describes consistent terminals, packages, and functional characteristics. Because CD4060BCM denotes a specific manufacturer ordering configuration, engineers should verify marking, grade, lifecycle status, and electrical limits rather than relying on family equivalence alone.
When should I choose CD4060BCM over a programmable counter?
Choose the CD4060BCM when a fixed 14-stage binary counter, divider, or oscillator-driven timer is sufficient and low component count matters. It is simpler than a programmable counter because it does not require configuration registers, firmware, or an external clock source. Choose a programmable counter instead when the count must be changed at runtime, arithmetic operations are required, or bidirectional and loadable counting is needed.
Is CD4060BCM suitable for a frequency-divider application?
Yes, the CD4060BCM is suitable for a frequency-divider application because it provides 14 ripple-carry counter stages and advances on each negative clock transition. The binary outputs create predictable division ratios relative to the input or oscillator frequency. For a timing-sensitive design, evaluate ripple delay, output rise and fall times, load capacitance, and the maximum operating frequency stated in the manufacturer datasheet.
How does the CD4060BCM oscillator function work?
The CD4060BCM contains oscillator capability that can be established with external timing components, allowing the counter to operate without a separate clock generator. The exact resistor and capacitor values, oscillation range, and start-up behavior must be selected using the manufacturer datasheet's oscillator application information. Temperature and component tolerance can affect frequency accuracy, so reserve timing margin for production variation.
What clock edge increments the CD4060BCM counter?
The CD4060BCM increments on the negative transition of each clock pulse. A negative edge is the change from a high clock level to a low clock level, also called a falling edge. This behavior differs from positive-edge counters and must be considered when defining reset timing, synchronizing external signals, or interpreting captured binary output values.
How should CD4060BCM be placed on a PCB?
Place the CD4060BCM on a surface-mount PCB using its 16-pin SOIC footprint and route the clock, reset, oscillator, and counter-output nets according to the manufacturer pin table. Keep the supply decoupling capacitor close to the device, use a continuous ground reference, and avoid routing oscillator or clock traces beside noisy switching nodes. Verify assembly clearance and pin-one orientation during board-layout review.
What power and thermal considerations apply to CD4060BCM?
The CD4060BCM is specified as a CMOS logic device with a maximum listed supply voltage of 15 V and an operating range of -55°C to +125°C. Its switching activity and output loading determine supply current and heat dissipation, so use the manufacturer electrical-characteristics table for design calculations. Keep the supply within its rated limit and ensure the PCB provides adequate thermal spreading around the SOIC package.
Where can I buy CD4060BCM online?
Use the Request a Quote form on this page to request CD4060BCM availability, current lead time, and a quotation for the exact 16-pin SOIC ordering configuration. Confirm the manufacturer, suffix, temperature grade, and packaging in the request so that the quotation matches the device intended for the BOM. Stock and delivery timing can change, so obtain a written quotation for production planning.
What is the price of CD4060BCM?
The current commercial terms for CD4060BCM are handled through the Request a Quote form on this page rather than through static pricing in this technical description. Submit the required quantity, target package, and manufacturing schedule to receive a current quotation. Include the exact MPN CD4060BCM so that pricing and availability correspond to the intended manufacturer part.
What is the lead time for CD4060BCM?
Request the current CD4060BCM lead time using the Request a Quote form on this page. Lead time depends on the exact manufacturer source, order quantity, and current supply status, so it should be confirmed for each production schedule. When requesting a quotation, state the required date and whether partial delivery is acceptable to help assess procurement options.
Is CD4060BCM in stock?
CD4060BCM inventory should be checked through the Request a Quote form on this page using the exact manufacturer part number. The form is the appropriate channel for current stock confirmation and production allocation because component availability can vary by quantity and date. Specify your required delivery schedule and packaging needs so the supply response is actionable.

Datos de referencia de ingeniería para CD4060BCM — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the CD4060BCM for compact legacy-compatible designs that need a 14-stage binary counter, fixed frequency division, or oscillator-backed timing without programmable registers or firmware. It is particularly appropriate when a 16-pin SOIC footprint, negative-edge counting, and multiple divided outputs are already part of the system architecture. Select a dedicated 4-bit counter such as the SN74LS93DR when only four counting stages are required or when cascading flexibility matters. Select the SN74LS90DR when decade counting is more useful than binary counting. For an alternative within the CD4060B family, CD4060BMG4, CD4060BCMX, CD4060BMT, or a confirmed TI CD4060B orderable suffix can preserve the functional architecture, but the replacement must be checked for exact suffix, temperature grade, supply limits, clock frequency, oscillator range, and lifecycle status before production release.

Comparación con alternativas

Parámetro Este producto CD4060BMG4 CD4060BCMX CD4060BMT CD4060B
Brand onsemi onsemi Fairchild Semiconductor Texas Instruments Texas Instruments
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC orderable suffix required
Counter Type 14-stage ripple-carry binary counter CD4060B binary counter/divider CD4060B binary counter/divider CD4060B binary counter/divider 14-stage ripple-carry binary counter/divider
Counter Resolution 14 bits 14 bits 14 bits 14 bits 14 bits
Clock Edge Negative edge Negative edge Negative edge Negative edge Negative edge
Logic Family 4000-series CMOS 4000-series CMOS 4000-series CMOS 4000-series CMOS 4000-series CMOS
Maximum Supply Voltage 15 V 15 V 15 V 15 V 15 V

Diferenciadores clave

  • Combines fixed binary counting and oscillator capability (frente a SN74LS93DR)
  • Provides 14 counter stages rather than a 4-bit counting width (frente a SN74LS93DR)
  • Single-package timing and division (frente a SN74LS90DR)

Notas de diseño

Assign all 16 nets directly from the manufacturer pin-description table and preserve the standard SOIC pin-one orientation. Place the supply bypass capacitor close to the device power and ground pins, and provide a low-impedance ground path. Keep oscillator components and their associated tracks physically close to the IC to reduce stray capacitance and susceptibility to unrelated circuit noise.

The CD4060BCM advances on the negative clock transition, so confirm that the input waveform crosses the valid threshold cleanly and that reset is released outside the active clock transition region. Use adequate clock rise and fall times, avoid excessive loading on the oscillator node, and do not treat a multi-bit ripple output as simultaneous unless the application tolerates propagation skew across the 14 stages.

Do not select a replacement solely from the CD4060 family name. Verify the exact manufacturer part number, 16-pin SOIC footprint, temperature grade, supply-voltage rating, clock frequency, oscillator range, and lifecycle status. Cross-reference information indicates consistent terminals and functionality for the listed alternatives, but qualification still requires comparison of the ordered suffix and manufacturer electrical limits.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the exact CD4060BCM ordering configuration. AEC-Q100 status is treated as not applicable because this is a general-purpose CMOS logic counter rather than an automotive-qualified device.

Búsquedas relacionadas

CD4060BCM datasheet CD4060BCM pinout CD4060BCM datasheet pdf CD4060BCM equivalent CD4060BCM replacement CD4060BCM drop-in replacement CD4060BCM SOIC-16 pinout CD4060BCM application circuit CD4060BCM price CD4060BCM stock onsemi CD4060BCM CD4060BCM vs CD4060BMG4

Componentes & términos relacionados

onsemi Fairchild Semiconductor Texas Instruments CD4060BCM CD4060BMG4 CD4060BCMX CD4060BMT CD4060B SN74LS93DR SN74LS90DR binary counter ripple-carry counter counter/divider CMOS logic IC digital logic semiconductor timer frequency divider RC oscillator negative-edge clock 14-stage counter 14-bit resolution 16-pin SOIC SOIC package family surface-mount package industrial timer
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ