Texas Instruments

CD4521BMT - 24-Bit CMOS Frequency Divider | Texas Instruments

N.º de pieza: CD4521BMT ✓ Activo
3 V Vdss 16-pin SOIC Package Negative edge Speed
MOQ: 1 |

CD4521BMT Descripción general

Texas Instruments CD4521BMT is a CMOS 24-stage frequency-divider and counter IC with one 24-bit divide-by-2 element, negative-edge triggering, and a 16-pin SOIC package. It operates across a stated temperature range of -55°C to +125°C and supports supply voltages down to 3 V. Its principal function is to divide an incoming clock signal by two while providing 24 stages of cascading division.

A frequency divider is a sequential digital circuit that produces an output clock at a fraction of its input frequency. The CD4521 belongs to the CMOS CD4000 logic family and falls within the broader hierarchy of divider IC, digital counter, logic IC, and semiconductor. Dividing a frequency is useful when a subsystem requires a slower timing reference derived from a faster oscillator without requiring another clock source.

The CD4521BMT's 24-stage, divide-by-2 architecture makes it appropriate for clock division, waveform timing, event counting, and low-frequency generation. Negative-edge triggering defines the active clock transition used by the counter. Its 16-SOIC package supports conventional surface-mount PCB assembly, while the broad stated operating-temperature range allows consideration in industrial and extended-temperature equipment.

The device is identified by Texas Instruments as a CMOS 24-stage frequency divider. The CD4521B family operates from the CD4000 CMOS logic family, whose members are designed for low-power digital operation. Because the counter advances on a selected clock edge, the input source must provide a clean, repeatable waveform with timing that satisfies the family's applicable operating limits.

Typical uses include dividing a system oscillator for slower housekeeping clocks, creating timing intervals in digital control equipment, counting recurring external events, and generating predictable square-wave timing references. The 24-bit count depth provides substantially more division stages than a basic binary ripple counter, making the device useful where a high-order division ratio is required.

Layout should keep the clock input path short and return the device ground pins to a low-impedance ground plane. Supply and ground connections should be placed to minimize loop area, and unused inputs must be tied to a defined logic level. Designers should verify the counter's reset behavior, maximum operating frequency, and output-drive capability against the specific clock source and load before releasing a production design.

This product page combines the Texas Instruments family description, package and temperature information, distributor listings, and pin-compatible cross-reference results with practical guidance for clock-divider design, replacement selection, and PCB implementation. It is intended to help engineers identify the exact CD4521BMT ordering variant and evaluate it for extended-timing and frequency-divider applications.

Alternativas directas para CD4521BMT — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con CD4521BMT (mismo factor de forma y huella) — difiere en Logic Family.

Texas Instruments
Logic Family: CD4000 CMOS
Comparar con CD4521BMT →

CD4521BM

✅ Sustitución directa
Texas Instruments
📦 16-pin SOIC
CMOS 24-stage frequency divider · 24 ripple-carry binary counter stages · 24 bit · CD4000 CMOS · Negative transition of IN1 · RC or crystal oscillator configuration using IN1 · 3 V

Consulte el precio

Ver hoja de datos →

CD4521BNSR

✅ Sustitución directa
📦 16-pin SOIC
Different ordering suffix with the same reported terminal and package configuration; ordering-code and qualification differences require review

📋 Alternativa de referencia (no en el catálogo)

CD4521BNSRG4

✅ Sustitución directa
📦 16-pin SOIC
Different ordering suffix with the same reported terminal and package configuration; ordering-code and qualification differences require review

📋 Alternativa de referencia (no en el catálogo)

CD4521BMT Valores máximos y características eléctricas

Función 24-stage frequency divider
Counter Element Count 1 element
Count Length 24 bits
Division Ratio Divide by 2
Clock Edge Negative edge
Logic Technology CMOS
Logic Family CD4000
Minimum Supply Voltage 3 V
Rango de temperatura de funcionamiento -55°C to +125°C
Encapsulado 16-pin SOIC
Package Width 3.90 mm
Tipo de montaje Surface mount

Guía de configuración de pines de CD4521BMT 3.90 mm

Configuración de pines para CD4521BMT (encapsulado 3.90 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 3.90 mm para CD4521BMT

No hay datos detallados de patillaje disponibles para CD4521BMT.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

CD4521BMT es adecuado para 6 aplicacións: System Clock Division, Industrial Timing Control, Digital Event Counting, Low-Frequency Waveform Generation, Instrumentation and Measurement, Audio and Control Sequencing.

⚡

System Clock Division

The CD4521BMT fits system-clock division because it provides 24 stages of divide-by-2 operation in a 16-pin SOIC package. When a fast oscillator must feed a slower housekeeping or sequencing clock, the counter can create a predictable frequency ratio without adding another oscillator. The negative-edge trigger gives the designer a defined point at which the internal state advances. The primary design checks are the input clock's edge rate, duty cycle, and maximum frequency, together with the allowable loading on the divided output. Place the clock trace away from noisy analog paths and use a short ground return to prevent clock-edge corruption. The manufacturer's CD4521B datasheet should be used to confirm timing margins and output behavior across the full -55°C to +125°C operating range.

🏭

Industrial Timing Control

The CD4521BMT is appropriate for industrial timing control where a repetitive input must be divided into a slower reference for supervisory logic. Its 24-stage CMOS counter allows long division ratios, while the 16-pin SOIC package supports compact surface-mount assemblies. The stated -55°C to +125°C range provides useful temperature headroom for extended-temperature equipment. Designers should confirm that the selected ordering grade satisfies the product's qualification requirements and that the clock source remains within the datasheet's operating-frequency limits. Use a low-impedance supply and ground arrangement, place decoupling at the device, and avoid routing the timing signal beside high-current switching nodes. The output should be checked against downstream reset, sampling, and watchdog requirements before the circuit is released.

🧩

Digital Event Counting

The CD4521BMT can count recurring digital events using its 24-bit counter and negative-edge triggering, making it suitable for supervisory event-counting or periodic-task generation. Negative-edge selection establishes which clock transition advances the count and allows the designer to align counting with a particular source waveform. Verify that the event source cannot exceed the applicable maximum frequency and that its signal levels remain valid for the selected supply voltage. The wide package outline provides convenient access to clock, output, supply, and ground connections in a standard SOIC footprint. Keep the input edge clean with adequate rise and fall times, provide local supply bypassing, and return unused pins to defined levels where required by the datasheet. This makes the device useful when a long count depth matters more than adding a separate programmable timer.

🔧

Low-Frequency Waveform Generation

The CD4521BMT can generate a lower-frequency square-wave reference by repeatedly dividing an input oscillator with its 24-stage divide-by-2 architecture. This arrangement is useful for slow clocking, periodic housekeeping, or frequency reduction where the source clock is stable but faster than required. The CMOS implementation and 16-pin SOIC package support compact, surface-mount designs. Engineers should confirm that the oscillator amplitude, duty cycle, and transition times meet the electrical requirements of the CD4521 family and that the divided output can drive the intended load. Keep the oscillator loop compact and isolate the timing net from inductors, relays, and switching-regulator power paths. Also validate operation across temperature because propagation delay and timing margins can change as the operating environment changes.

📟

Instrumentation and Measurement

The CD4521BMT is suitable for instrumentation requiring a derived timing reference rather than a high-frequency processing clock. Dividing a stable source into a slower signal can support sampling-control, trigger, or repetitive-measurement sequencing. Its 24 counter stages provide a substantial division ratio, and the 16-pin SOIC package is straightforward to route on measurement boards. The key engineering checks are clock jitter, edge cleanliness, input frequency, and the fanout presented by the next stage. Use a quiet reference oscillator and provide local bypassing so supply disturbance does not distort the clock threshold. For sensitive analog channels, keep the divider away from high-impedance inputs and switching nodes. Verify the counter's exact pin functions and reset requirements in the Texas Instruments datasheet before finalizing the schematic.

🎧

Audio and Control Sequencing

The CD4521BMT can divide a system timing signal to create repeated control intervals in audio equipment and other digital subsystems. The long division chain is useful when a stable but relatively fast master clock must drive slower state updates or sequencing logic. The negative-edge trigger provides a defined sampling transition, while the 16-pin SOIC package supports conventional PCB assembly. Keep the divider supply clean and separate from analog outputs, and route the clock away from microphone or line-input paths. Verify output rise and fall times, fanout, and maximum frequency with the Texas Instruments documentation. If a variant with a different suffix is used for redesign, confirm that its package marking, temperature grade, and qualification status match the product requirements rather than relying only on the 16-pin footprint.

Resumen de productos recomendados

CD4521BM Texas Instruments Se usa en: System Clock Division, Industrial Timing Control, Digital Event Counting, Instrumentation and Measurement, Audio and Control Sequencing CD4521BNSR Package-compatible CD4521B ordering variant Se usa en: System Clock Division, Digital Event Counting, Low-Frequency Waveform Generation, Instrumentation and Measurement CD4521BNSRG4 Same-family ordering variant for review Se usa en: Industrial Timing Control, Low-Frequency Waveform Generation, Audio and Control Sequencing
What is the CD4521BMT?
The CD4521BMT is a Texas Instruments CMOS 24-stage frequency-divider IC with one 24-bit divide-by-2 counter element and negative-edge triggering. According to the Texas Instruments product page, it is supplied in a 16-pin SOIC package and is intended for a stated operating-temperature range of -55°C to +125°C. It is useful where a faster periodic signal must become a slower clock or timing reference.
What is the operating voltage of CD4521BMT?
The CD4521BMT supports supply voltages down to 3 V. The maximum supply-voltage rating and detailed operating conditions must be taken from the applicable Texas Instruments CD4521B datasheet when designing the power rail. The part belongs to the CD4000 CMOS logic family, and the exact maximum should not be inferred solely from the 3 V minimum reported for the family variant.
Where can I download the CD4521BMT datasheet PDF?
The official CD4521BMT documentation is available through Texas Instruments at https://www.ti.com/product/CD4521B, which links to the CD4521B datasheet and supporting product information. The part-specific ordering page is https://www.ti.com/product/CD4521B/part-details/CD4521BMT. Use the manufacturer PDF for the authoritative pin descriptions, electrical limits, timing characteristics, and recommended operating conditions.
Where can I find the CD4521BMT pinout?
The CD4521BMT pinout is published in the Texas Instruments CD4521B datasheet associated with https://www.ti.com/product/CD4521B. The ordering information identifies CD4521BMT as a 16-pin SOIC device. Use the pin-description table and package drawing in that datasheet when assigning PCB nets and verifying counter, clock, reset, output, supply, and ground connections.
What is the difference between CD4521BMT and CD4521BM?
CD4521BMT and CD4521BM identify related orderable variants in the same Texas Instruments CD4521B family, and cross-reference information lists them as package- and terminal-compatible. The exact ordering-code distinction and any grade, marking, or packing differences must be confirmed in the manufacturer ordering table before substitution. For production releases, verify the purchased variant against the required package, temperature range, and qualification status.
Can CD4521BNSR replace CD4521BMT?
CD4521BNSR is identified in the cross-reference results as a complete replacement candidate for CD4521BMT because the package and terminals are reported as consistent. Before approving it, compare the Texas Instruments ordering information, pin description, electrical limits, timing parameters, and temperature grade. A matching SOIC outline alone does not establish that every application-specific requirement is satisfied.
When should I choose CD4521BMT over another CD4521B ordering variant?
Choose CD4521BMT when its exact 16-SOIC ordering variant, stated -55°C to +125°C range, and qualification records match the product requirements. CD4521BM, CD4521BNSR, and CD4521BNSRG4 appear in package-compatible cross-reference results, but their ordering suffixes may denote different packaging or qualification options. Select the variant that satisfies the complete BOM, not only the mechanical footprint.
Is CD4521BMT suitable for frequency division and clock generation?
Yes. The CD4521BMT is specifically described as a CMOS 24-stage frequency divider with divide-by-2 operation and negative-edge triggering. Its 24 stages are suited to deriving a lower-frequency timing signal from a periodic input. The input frequency, output loading, duty cycle, and timing margins must remain within the values specified by the manufacturer datasheet.
What is the best drop-in replacement for CD4521BMT?
CD4521BM is the closest same-manufacturer drop-in candidate identified in the cross-reference results, with CD4521BNSR and CD4521BNSRG4 also reported as terminal- and package-compatible replacements. No verified cross-manufacturer drop-in candidate was identified. Before selecting a substitute, compare the full ordering codes, 16-pin SOIC drawing, pin functions, supply limits, timing characteristics, and temperature requirements.
What can replace CD4521BMT?
CD4521BM, CD4521BNSR, and CD4521BNSRG4 are reported as pin- and package-compatible replacements for CD4521BMT in the available cross-reference material. They are all Texas Instruments CD4521B-family devices, so they provide the strongest architectural continuity. Confirm the exact suffix, qualification grade, marking, and lifecycle status against the Texas Instruments ordering information before using them in production.
What is a Texas Instruments equivalent for CD4521BMT?
Texas Instruments CD4521BM is the primary same-brand equivalent listed for CD4521BMT, while CD4521BNSR and CD4521BNSRG4 are also reported as complete replacement candidates. Each uses a compatible 16-pin SOIC arrangement. The final choice should follow a full comparison of the manufacturer ordering table, electrical characteristics, timing limits, and qualification requirements.
CD4521BMT vs CD4521BNSRG4 — which is better?
CD4521BMT and CD4521BNSRG4 are reported as completely replaceable because their terminals, package, and principal performance characteristics are consistent. Selection therefore depends on orderable qualification and documentation requirements rather than a functional advantage visible in the listing. Review the exact suffix definitions and product-lifecycle information for the application before releasing either part number.
Where can I buy CD4521BMT and what is its lead time?
The CD4521BMT can be requested through the Request a Quote form on this page, which routes commercial questions to XAIPART without embedding a static price. The available manufacturer product page identifies the part for ordering, while distributor listings report different stock conditions. Current availability, minimum order quantity, production allocation, and lead time should be confirmed through that form.
How do I design the CD4521BMT clock input for reliable operation?
Drive the clock input from a clean source with an edge rate and duty cycle that satisfy the CD4521B timing specifications, and connect the ground and supply pins with short, low-impedance traces. Place decoupling close to the device and keep sensitive analog or high-speed routing away from the clock path. Validate the maximum operating frequency, output loading, and any reset requirement in the final circuit.
What are the key specifications of CD4521BMT that engineers should know?
The key CD4521BMT specifications are 24 divider stages, one 24-bit divide-by-2 element, negative-edge clock triggering, CMOS construction in the CD4000 logic family, a 3 V minimum supply voltage, and a 16-pin SOIC package. Texas Instruments states an operating-temperature range of -55°C to +125°C. Maximum supply voltage, maximum frequency, and detailed timing limits must be taken from the manufacturer datasheet.

Datos de referencia de ingeniería para CD4521BMT — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose CD4521BMT when the design requires a Texas Instruments CD4521B 24-stage, divide-by-2 counter in a 16-pin SOIC package and its exact ordering and qualification terms satisfy the product specification. CD4521BM is the closest same-family ordering variant, while CD4521BNSR and CD4521BNSRG4 are reported as package- and terminal-compatible alternatives. These choices preserve the same core 24-bit counter function and do not require a PCB footprint change. The distinction among suffixes should be based on the manufacturer ordering table, including packing, marking, temperature grade, qualification, and lifecycle status. If a cross-manufacturer source is introduced, require a complete pin-function, timing, supply-voltage, and package-drawing comparison rather than relying on the CD4000 family name or SOIC outline alone.

Comparación con alternativas

Parámetro Este producto CD4521BM CD4521BNSR CD4521BNSRG4
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Function 24-stage frequency divider 24-stage frequency divider 24-stage frequency divider 24-stage frequency divider
Counter Element Count 1 element 1 element 1 element 1 element
Count Length 24 bits 24 bits 24 bits 24 bits
Division Ratio Divide by 2 Divide by 2 Divide by 2 Divide by 2
Clock Edge Negative edge Negative edge Negative edge Negative edge
Logic Technology CMOS CMOS CMOS CMOS
Minimum Supply Voltage 3 V 3 V 3 V 3 V
Ordering-Code Difference BMT ordering suffix BM ordering suffix BNSR ordering suffix BNSRG4 ordering suffix

Diferenciadores clave

  • Direct 24-stage divide-by-2 functionality in a standard 16-pin SOIC (frente a CD4521BM)
  • Reported terminal- and package-level replacement path (frente a CD4521BNSR)
  • Same-family alternative without changing the board footprint (frente a CD4521BNSRG4)

Notas de diseño

Route the clock input as a short, continuous trace with a nearby ground reference. Avoid sharing the input path with relay, motor, or switching-power-node return currents, because supply disturbance can create false clock edges and corrupt the 24-bit count. Place the device's decoupling capacitor at the supply pins and connect ground pins to the plane through low-impedance paths.

Confirm the clock source's amplitude, duty cycle, rise time, fall time, jitter, and maximum repetition rate against the CD4521B timing limits in the manufacturer datasheet. A nominally valid frequency can still cause intermittent operation if transitions are too slow or the source crosses the switching threshold with excessive noise. Use the negative-edge trigger consistently when defining the system's timing relationship.

Do not approve a substitution from package dimensions alone. CD4521BM, CD4521BNSR, and CD4521BNSRG4 are reported as pin- and package-compatible alternatives, but ordering suffixes can encode differences in packing, marking, or qualification. Compare the exact Texas Instruments ordering table, pin functions, electrical limits, timing data, temperature grade, and lifecycle status before changing the released BOM.

Design the supply rail for the CD4521BMT's CMOS switching demand rather than assuming a low-power device cannot create supply disturbance. Keep the regulator reference quiet, minimize the distance between the IC, local bypass capacitor, and ground return, and avoid sharing narrow supply traces with unrelated high-current loads. Verify operation at the supply's minimum voltage because timing and output behavior can change as rail voltage falls.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was established from the available product and distributor information.

Datos verificados el: 2026-11-15 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

CD4521BMT datasheet CD4521BMT pinout CD4521BMT datasheet pdf Texas Instruments CD4521BMT CD4521BMT 16-SOIC CD4521BMT 24-stage divider CD4521BMT frequency divider CD4521BMT equivalent CD4521BMT replacement CD4521BMT cross reference CD4521BMT vs CD4521BNSR CD4521BMT price CD4521BMT stock CD4521BMT footprint CD4521BMT application circuit

Componentes & términos relacionados

Texas Instruments CD4521BMT CD4521BM CD4521BNSR CD4521BNSRG4 CD4521B CMOS CD4000 logic family frequency divider counter IC digital counter logic IC semiconductor divide-by-2 negative-edge triggering 24-bit counter 16-pin SOIC SOIC package surface-mount technology clock division event counting timing control industrial electronics measurement instrumentation
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ