CD4521BMT - 24-Bit CMOS Frequency Divider | Texas Instruments
料号: CD4521BMT ✓ 量产中CD4521BMT 概述
A frequency divider is a sequential digital circuit that produces an output clock at a fraction of its input frequency. The CD4521 belongs to the CMOS CD4000 logic family and falls within the broader hierarchy of divider IC, digital counter, logic IC, and semiconductor. Dividing a frequency is useful when a subsystem requires a slower timing reference derived from a faster oscillator without requiring another clock source.
The CD4521BMT's 24-stage, divide-by-2 architecture makes it appropriate for clock division, waveform timing, event counting, and low-frequency generation. Negative-edge triggering defines the active clock transition used by the counter. Its 16-SOIC package supports conventional surface-mount PCB assembly, while the broad stated operating-temperature range allows consideration in industrial and extended-temperature equipment.
The device is identified by Texas Instruments as a CMOS 24-stage frequency divider. The CD4521B family operates from the CD4000 CMOS logic family, whose members are designed for low-power digital operation. Because the counter advances on a selected clock edge, the input source must provide a clean, repeatable waveform with timing that satisfies the family's applicable operating limits.
Typical uses include dividing a system oscillator for slower housekeeping clocks, creating timing intervals in digital control equipment, counting recurring external events, and generating predictable square-wave timing references. The 24-bit count depth provides substantially more division stages than a basic binary ripple counter, making the device useful where a high-order division ratio is required.
Layout should keep the clock input path short and return the device ground pins to a low-impedance ground plane. Supply and ground connections should be placed to minimize loop area, and unused inputs must be tied to a defined logic level. Designers should verify the counter's reset behavior, maximum operating frequency, and output-drive capability against the specific clock source and load before releasing a production design.
This product page combines the Texas Instruments family description, package and temperature information, distributor listings, and pin-compatible cross-reference results with practical guidance for clock-divider design, replacement selection, and PCB implementation. It is intended to help engineers identify the exact CD4521BMT ordering variant and evaluate it for extended-timing and frequency-divider applications.
直接替换替代料: CD4521BMT ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: CD4521BMT (相同外形与封装尺寸) ——差异在于 Logic Family.
CD4521BM
✅ 直接替换联系询价
查看数据手册 →CD4521BNSR
✅ 直接替换📋 参考替代料(不在目录中)
CD4521BNSRG4
✅ 直接替换📋 参考替代料(不在目录中)
CD4521BMT 最大额定值与电气特性
| 功能 | 24-stage frequency divider |
| Counter Element Count | 1 element |
| Count Length | 24 bits |
| Division Ratio | Divide by 2 |
| Clock Edge | Negative edge |
| Logic Technology | CMOS |
| Logic Family | CD4000 |
| Minimum Supply Voltage | 3 V |
| 工作温度范围 | -55°C to +125°C |
| 封装 | 16-pin SOIC |
| Package Width | 3.90 mm |
| 安装类型 | Surface mount |
CD4521BMT 3.90 mm 引脚配置指南
CD4521BMT(3.90 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: CD4521BMT.
请参阅 数据手册 以查看完整引脚配置。
典型应用
CD4521BMT 适用于 6 应用s: System Clock Division, Industrial Timing Control, Digital Event Counting, Low-Frequency Waveform Generation, Instrumentation and Measurement, Audio and Control Sequencing.
System Clock Division
The CD4521BMT fits system-clock division because it provides 24 stages of divide-by-2 operation in a 16-pin SOIC package. When a fast oscillator must feed a slower housekeeping or sequencing clock, the counter can create a predictable frequency ratio without adding another oscillator. The negative-edge trigger gives the designer a defined point at which the internal state advances. The primary design checks are the input clock's edge rate, duty cycle, and maximum frequency, together with the allowable loading on the divided output. Place the clock trace away from noisy analog paths and use a short ground return to prevent clock-edge corruption. The manufacturer's CD4521B datasheet should be used to confirm timing margins and output behavior across the full -55°C to +125°C operating range.
推荐
Industrial Timing Control
The CD4521BMT is appropriate for industrial timing control where a repetitive input must be divided into a slower reference for supervisory logic. Its 24-stage CMOS counter allows long division ratios, while the 16-pin SOIC package supports compact surface-mount assemblies. The stated -55°C to +125°C range provides useful temperature headroom for extended-temperature equipment. Designers should confirm that the selected ordering grade satisfies the product's qualification requirements and that the clock source remains within the datasheet's operating-frequency limits. Use a low-impedance supply and ground arrangement, place decoupling at the device, and avoid routing the timing signal beside high-current switching nodes. The output should be checked against downstream reset, sampling, and watchdog requirements before the circuit is released.
推荐
Digital Event Counting
The CD4521BMT can count recurring digital events using its 24-bit counter and negative-edge triggering, making it suitable for supervisory event-counting or periodic-task generation. Negative-edge selection establishes which clock transition advances the count and allows the designer to align counting with a particular source waveform. Verify that the event source cannot exceed the applicable maximum frequency and that its signal levels remain valid for the selected supply voltage. The wide package outline provides convenient access to clock, output, supply, and ground connections in a standard SOIC footprint. Keep the input edge clean with adequate rise and fall times, provide local supply bypassing, and return unused pins to defined levels where required by the datasheet. This makes the device useful when a long count depth matters more than adding a separate programmable timer.
推荐
Low-Frequency Waveform Generation
The CD4521BMT can generate a lower-frequency square-wave reference by repeatedly dividing an input oscillator with its 24-stage divide-by-2 architecture. This arrangement is useful for slow clocking, periodic housekeeping, or frequency reduction where the source clock is stable but faster than required. The CMOS implementation and 16-pin SOIC package support compact, surface-mount designs. Engineers should confirm that the oscillator amplitude, duty cycle, and transition times meet the electrical requirements of the CD4521 family and that the divided output can drive the intended load. Keep the oscillator loop compact and isolate the timing net from inductors, relays, and switching-regulator power paths. Also validate operation across temperature because propagation delay and timing margins can change as the operating environment changes.
推荐
Instrumentation and Measurement
The CD4521BMT is suitable for instrumentation requiring a derived timing reference rather than a high-frequency processing clock. Dividing a stable source into a slower signal can support sampling-control, trigger, or repetitive-measurement sequencing. Its 24 counter stages provide a substantial division ratio, and the 16-pin SOIC package is straightforward to route on measurement boards. The key engineering checks are clock jitter, edge cleanliness, input frequency, and the fanout presented by the next stage. Use a quiet reference oscillator and provide local bypassing so supply disturbance does not distort the clock threshold. For sensitive analog channels, keep the divider away from high-impedance inputs and switching nodes. Verify the counter's exact pin functions and reset requirements in the Texas Instruments datasheet before finalizing the schematic.
推荐
Audio and Control Sequencing
The CD4521BMT can divide a system timing signal to create repeated control intervals in audio equipment and other digital subsystems. The long division chain is useful when a stable but relatively fast master clock must drive slower state updates or sequencing logic. The negative-edge trigger provides a defined sampling transition, while the 16-pin SOIC package supports conventional PCB assembly. Keep the divider supply clean and separate from analog outputs, and route the clock away from microphone or line-input paths. Verify output rise and fall times, fanout, and maximum frequency with the Texas Instruments documentation. If a variant with a different suffix is used for redesign, confirm that its package marking, temperature grade, and qualification status match the product requirements rather than relying only on the 16-pin footprint.
推荐
推荐产品汇总
工程参考数据: CD4521BMT ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | CD4521BM | CD4521BNSR | CD4521BNSRG4 |
|---|---|---|---|---|
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Function | 24-stage frequency divider | 24-stage frequency divider | 24-stage frequency divider | 24-stage frequency divider |
| Counter Element Count | 1 element | 1 element | 1 element | 1 element |
| Count Length | 24 bits | 24 bits | 24 bits | 24 bits |
| Division Ratio | Divide by 2 | Divide by 2 | Divide by 2 | Divide by 2 |
| Clock Edge | Negative edge | Negative edge | Negative edge | Negative edge |
| Logic Technology | CMOS | CMOS | CMOS | CMOS |
| Minimum Supply Voltage | 3 V | 3 V | 3 V | 3 V |
| Ordering-Code Difference | BMT ordering suffix | BM ordering suffix | BNSR ordering suffix | BNSRG4 ordering suffix |
关键差异点
- Direct 24-stage divide-by-2 functionality in a standard 16-pin SOIC (对比 CD4521BM)
- Reported terminal- and package-level replacement path (对比 CD4521BNSR)
- Same-family alternative without changing the board footprint (对比 CD4521BNSRG4)
设计说明
Route the clock input as a short, continuous trace with a nearby ground reference. Avoid sharing the input path with relay, motor, or switching-power-node return currents, because supply disturbance can create false clock edges and corrupt the 24-bit count. Place the device's decoupling capacitor at the supply pins and connect ground pins to the plane through low-impedance paths.
Confirm the clock source's amplitude, duty cycle, rise time, fall time, jitter, and maximum repetition rate against the CD4521B timing limits in the manufacturer datasheet. A nominally valid frequency can still cause intermittent operation if transitions are too slow or the source crosses the switching threshold with excessive noise. Use the negative-edge trigger consistently when defining the system's timing relationship.
Do not approve a substitution from package dimensions alone. CD4521BM, CD4521BNSR, and CD4521BNSRG4 are reported as pin- and package-compatible alternatives, but ordering suffixes can encode differences in packing, marking, or qualification. Compare the exact Texas Instruments ordering table, pin functions, electrical limits, timing data, temperature grade, and lifecycle status before changing the released BOM.
Design the supply rail for the CD4521BMT's CMOS switching demand rather than assuming a low-power device cannot create supply disturbance. Keep the regulator reference quiet, minimize the distance between the IC, local bypass capacitor, and ground return, and avoid sharing narrow supply traces with unrelated high-current loads. Verify operation at the supply's minimum voltage because timing and output behavior can change as rail voltage falls.
合规信息
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was established from the available product and distributor information.