CS8421-CNZ - 32-Bit 192kHz Stereo SRC | Cirrus Logic
N.º de pieza: CS8421-CNZ ✗ Fin de vidaCS8421-CNZ Descripción general
A sample-rate converter is an interface IC that translates digital audio data from one clock domain to another without requiring the source and destination equipment to share a common sample clock. It belongs to the digital-audio IC hierarchy alongside audio codecs and digital audio interfaces. This capability is useful when equipment must accept audio from a clock domain that differs from the internal processing rate, such as a computer, broadcast, studio, or networked audio system.
Principal performance features include a 175 dB dynamic range, -140 dB THD+N, operation without programming, and no requirement for an external master clock. Sampling rates can reach 211 kHz, with input-to-output sample-rate ratios spanning 1:8. The master-clock section supports 128 times Fs, 256 times Fs, and bypass operation, while the time-division multiplexing interface provides a practical connection to digital audio processors and transport devices.
The CS8421 uses a monolithic CMOS implementation to combine asynchronous rate conversion, clocking support, and multichannel digital-audio routing in one device. Its 32-bit datapath accommodates high-resolution PCM audio, while the integrated oscillator offers a practical fallback when no external master clock is available. The 20-QFN surface-mount package supports compact audio conversion and clock-isolation designs, although careful decoupling and signal-routing practices remain necessary for high-performance audio boards.
Typical uses include asynchronous audio bridges, digital mixing consoles, studio preamplifiers, broadcast equipment, hi-fi DAC boards, computer-audio interfaces, and multimedia systems that must reconcile unrelated sample-rate domains. The device is particularly valuable when converting high-resolution PCM streams to a rate accepted by an ADC, DAC, DSP, or digital transport while preserving low distortion and high dynamic range.
For implementation, follow the pin-description table and reference configuration in the manufacturer datasheet when assigning data, clock, control, supply, and ground connections. Place input and output decoupling capacitors close to their associated pins, route high-speed digital signals over continuous reference planes, and isolate asynchronous clocks from sensitive analog sections to minimize data-dependent jitter and crosstalk.
This product page combines the principal CS8421-CNZ operating characteristics with application guidance, lifecycle information, pinout-status disclosure, and a strict drop-in-replacement assessment. It also distinguishes verified engineering constraints from unavailable procurement details so engineers can evaluate the converter for a new design or an existing production board.
Alternativas directas para CS8421-CNZ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con CS8421-CNZ (mismo factor de forma y huella) — difiere en Package.
CS8421-CZZ
✅ Sustitución directaConsulte el precio
Ver hoja de datos →CS8421-CNZ Valores máximos y características eléctricas
| Converter Type | Asynchronous stereo sample-rate converter |
| Maximum Nominal Sample Rate | 192 kHz |
| Maximum Supported Sample Rate | 211 kHz |
| Internal Data Width | 32 bit |
| Channel Count | 2 channels |
| Input Word Lengths | 16, 20, 24, or 32 bit |
| Output Word Lengths | 16, 20, 24, or 32 bit |
| Dynamic Range | 175 dB |
| THD+N | -140 dB |
| Input-to-Output Sample-Rate Ratio | 1:8 |
| Master Clock Modes | 128 × Fs, 256 × Fs, or bypass |
| Programming Requirement | No programming required |
| External Master Clock Requirement | No external master clock required |
| Integrated Oscillator Support | Yes |
| Encapsulado | 20-QFN, 5 mm × 5 mm |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de CS8421-CNZ 20-qfn, 5 mm × 5 mm
Configuración de pines para CS8421-CNZ (encapsulado 20-qfn, 5 mm × 5 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para CS8421-CNZ.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
CS8421-CNZ es adecuado para 6 aplicacións: Asynchronous Hi-Fi DAC Interface, Digital Audio Equipment Bridge, Broadcast and Studio Audio Conversion, Computer Audio Interface, Multimedia and Gaming Audio Hub, Networked and Streaming Audio Equipment.
Asynchronous Hi-Fi DAC Interface
The CS8421-CNZ fits between a digital source and a high-resolution DAC whose operating sample rate differs from the source clock. Its 32-bit internal path and support for 16-, 20-, 24-, and 32-bit words preserve high-resolution PCM data, while the asynchronous architecture removes the need for a shared source-to-DAC master clock. At rates up to 211 kHz, it can also serve studio, mastering, and audiophile conversion stages. The principal design concern is clock quality: keep the DAC clock low-noise and route the converter interface away from switching regulators to avoid introducing jitter into the output data stream.
Recomendado
Digital Audio Equipment Bridge
The CS8421-CNZ is useful when equipment must accept asynchronous digital audio from a computer, media player, or digital transport and present it to a local DSP. Because the device supports 1:8 input-to-output sample-rate ratios, it can bridge widely separated clock domains, and its integrated oscillator allows operation when no external master clock is available. The converter provides two channels and supports 16- through 32-bit word lengths. Board-level implementation should provide stable supplies, correct clock-mode selection, and short digital routes to minimize susceptibility to data-dependent jitter and clock crosstalk.
Recomendado
Broadcast and Studio Audio Conversion
The CS8421-CNZ supports professional audio paths that combine high sample rates with independent source and destination clocks. Its 32-bit architecture, 175 dB dynamic range, and -140 dB THD+N specifications provide ample resolution for studio monitoring, broadcast processing, and digital mixing workflows. The device can operate without programming, reducing control complexity in fixed-format equipment, while the 128 × Fs and 256 × Fs master-clock options support common digital audio clocking arrangements. Critical installations should verify word-length mapping, de-emphasis requirements, and channel alignment against the manufacturer application guidance.
Recomendado
Computer Audio Interface
The CS8421-CNZ can serve as the rate-conversion stage between a computer-generated PCM stream and a DAC running from a local audio clock. Asynchronous input and output are particularly useful when the computer transport clock is unrelated to the converter's DAC clock. The device handles two channels with a 32-bit datapath and can support 24-bit content at sample rates up to 211 kHz. For a compact USB or network-audio product, the 20-QFN package saves board area, but the implementation still needs careful partitioning between digital audio, USB or network circuitry, switching power supplies, and the analog output stage.
Recomendado
Multimedia and Gaming Audio Hub
The CS8421-CNZ can reconcile digital audio coming from a game console, television, set-top box, or networked source with a local codec or DAC clock. Its two-channel topology matches common stereo consumer paths, and the asynchronous sample-rate conversion function avoids forcing the entire system into one master-clock domain. Support for 16- through 32-bit words accommodates multiple digital audio formats, while operation without programming simplifies fixed consumer designs. Compact implementation requires uninterrupted clock and data traces, local high-frequency decoupling, and isolation from display, switching-supply, and amplifier noise sources.
Recomendado
Networked and Streaming Audio Equipment
The CS8421-CNZ is applicable between a network-audio receiver's packet-decoded PCM stream and an output stage clocked independently. Because input and output data can be completely asynchronous, the converter supports systems in which the network transport and local DAC do not share a master clock. The 32-bit datapath and support for sample rates up to 211 kHz accommodate high-resolution streams, while the integrated oscillator can simplify designs with limited clock resources. Engineers should preserve short digital paths, validate buffer behavior under variable-rate transport conditions, and keep switching-regulator and Ethernet circuitry away from the audio conversion region.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para CS8421-CNZ — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto |
|---|---|
| Brand | Cirrus Logic |
| Package | 20-QFN, 5 mm × 5 mm |
| Converter Type | Asynchronous stereo sample-rate converter |
| Maximum Nominal Sample Rate | 192 kHz |
| Maximum Supported Sample Rate | 211 kHz |
| Internal Data Width | 32 bit |
| Channel Count | 2 channels |
| Dynamic Range | 175 dB |
| THD+N | -140 dB |
| External Master Clock Required | No |
| Programming Required | No |
| Lifecycle Status | Discontinued |
Diferenciadores clave
- Asynchronous conversion without external-clock dependence (frente a General-purpose digital audio codecs)
- High-resolution stereo conversion in a compact package (frente a Lower-resolution sample-rate converters)
- No programming requirement for fixed audio paths (frente a Programmable digital audio processors)
Notas de diseño
Place every required input and output capacitor directly beside the corresponding CS8421-CNZ supply or interface pins. Keep digital-audio traces short, route them over a continuous ground reference, and avoid passing beneath switching-regulator inductors or high-current return paths. The 20-QFN footprint requires careful land-pattern alignment and thermal-pad soldering to achieve reliable electrical and mechanical performance.
Treat input and output clocks as separate timing domains even when the converter performs asynchronous conversion. Keep clock traces away from noisy data paths, use source-synchronous routing where the interface permits it, and maintain a continuous return path beneath each high-speed trace. Validate the completed board with an oscilloscope or audio analyzer because clock-edge degradation can manifest as jitter, data errors, or channel misalignment rather than an obvious logic failure.
Do not assume that another Cirrus Logic audio converter is pin-compatible merely because it uses a QFN package. Confirm the exact 20-QFN body dimensions, exposed-pad implementation, terminal numbering, supply pins, clock inputs, and digital-audio interface. Also confirm whether the -CNZ ordering code requires a specific commercial temperature range and whether legacy production files need an approved lifecycle transition before assembly.
Use separate, locally decoupled supply paths for the digital and analog-adjacent sections of the audio design, following the manufacturer recommendations. Keep regulator feedback and switching nodes outside the converter's signal area. Because the verified specifications do not state the complete supply-current or dropout limits for every operating mode, consult the CS8421 datasheet for the exact CS8421-CNZ configuration before setting rail voltages or calculating power dissipation.
Información de cumplimiento
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was stated for the CS8421-CNZ in the available manufacturer or distributor information.