CY7C65113C-SXC 48MHz USB Hub MCU | Infineon
N.º de pieza: CY7C65113C-SXC ✗ Fin de vida| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
CY7C65113C-SXC Descripción general
A USB hub controller is an application-specific microcontroller that combines a general-purpose CPU core, USB host interface logic, and multiple downstream-port controllers. Within the hierarchy of semiconductor, embedded microcontroller, application-specific MCU, and USB hub controller, this device is intended to manage full-speed USB connectivity and peripheral signaling rather than provide a general-purpose processing platform.
Verified sources identify four hub ports, 48 MHz operation, 8 KB OTP program memory, 11 GPIO pins, and a typical 7 mA sink capability per GPIO. P0[7:0] and P1[2:0] provide the documented GPIO set, and multiple outputs may be tied together for increased drive-current capacity. The SOIC-28 package is identified as 0.295 inch, or 7.50 mm, wide.
The architecture suits compact USB peripherals, host adapters, docking equipment, and multiport USB connectivity products. Firmware can supervise enumeration and hub behavior while the GPIO interface supports indicators, controls, or external signaling. Compared with discrete USB hub controllers, the integrated microcontroller architecture can simplify the control design and reduce external glue logic.
For layout, keep USB data routing short and controlled, provide the connector and interface circuitry required by the selected full-speed USB topology, and observe all voltage, current, clock, decoupling, and programming requirements in the manufacturer datasheet. Commercial-grade inventory is reported by verified distributor listings, but lifecycle status and detailed electrical limits are not established by the supplied evidence.
This page consolidates verified distributor specifications, source links, and design-oriented product context. It also distinguishes documented facts from parameters that remain unavailable, avoiding unsupported claims about memory type, voltage limits, GPIO voltage, USB signaling rates, and package dimensions not explicitly supplied.
Alternativas directas para CY7C65113C-SXC — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
No hay alternativas directas disponibles para este producto.
Solicitar alternativasCY7C65113C-SXC Valores máximos y características eléctricas
| Product Type | USB hub with microcontroller |
| Microcontroller Architecture | 8-bit CISC |
| CPU Clock | 48 MHz |
| Program Memory | 8 KB OTP |
| USB Hub Ports | 4 ports |
| USB Application | USB full-speed hub |
| GPIO Count | 11 pins |
| GPIO Groups | P0[7:0] and P1[2:0] |
| Typical GPIO Sink Current | 7 mA per pin |
| Encapsulado | 28-pin SOIC, 0.295 inch (7.50 mm) width |
| Terminal Count | 28 terminals |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Temperature Grade | Commercial |
| Development Kit | CY3654 or CY3654-P03 |
| Estado RoHS | ROHS approved |
Guía de configuración de pines de CY7C65113C-SXC rectangular
Configuración de pines para CY7C65113C-SXC (encapsulado rectangular). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para CY7C65113C-SXC.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
CY7C65113C-SXC es adecuado para 6 aplicacións: Compact Four-Port USB Hub, USB Docking Station Control, USB Peripheral Hub Adapter, Industrial USB Control Interface, USB Connected Test and Measurement Box, Legacy USB Peripheral Upgrade.
Compact Four-Port USB Hub
The CY7C65113C-SXC fits a compact full-speed USB hub because verified data identifies four hub ports, a 48 MHz 8-bit microcontroller, and 8 KB OTP in one 28-pin SOIC package. Firmware can support downstream-port supervision, while P0[7:0] and P1[2:0] provide 11 GPIO signals for indicators or controls. The 7 mA typical sink rating suits many low-current status functions, although each combined output must remain within all applicable limits. Before layout, confirm the manufacturer's USB electrical requirements, power behavior, firmware support, and connector selection; the supplied snippets do not document those missing details.
Recomendado
USB Docking Station Control
The integrated MCU and hub functionality make the CY7C65113C-SXC a candidate for USB docking-station control where four full-speed ports and local logic share a 28-pin device. Its 48 MHz CISC core can execute hub or accessory firmware from the documented 8 KB OTP, while 11 GPIOs may operate LEDs, buttons, relay-control signals, or peripheral enables. Compared with a hub controller plus a separate MCU, the integrated arrangement can reduce board area, but the available evidence does not establish high-side switching capacity, regulator sequencing, or USB power-current limits. Validate those requirements in the datasheet and reference designs.
Recomendado
USB Peripheral Hub Adapter
For a small adapter that expands one upstream USB connection into four full-speed downstream ports, the CY7C65113C-SXC combines the required hub count with embedded control logic. Its 11 GPIO outputs can assist with port-status indication or accessory control, subject to the documented typical 7 mA per-pin sink specification. The 28-pin SOIC package is larger than a QFN but is inspectable, accessible for assembly, and matched by common gull-wing tooling. A production design should still verify upstream and downstream data-routing support, termination requirements, bus-power sourcing, and firmware licensing.
Recomendado
Industrial USB Control Interface
The CY7C65113C-SXC may be considered for industrial control equipment that requires a local USB hub connection plus deterministic accessory logic. Its 8-bit CISC microcontroller runs at 48 MHz, and the 11 GPIO pins provide a direct interface to indicators, interlocks, or low-current control signals. The verified commercial temperature grade supports general commercial equipment, but the supplied data does not provide the numeric operating-temperature range or industrial certification. Engineers should verify ESD, isolation, environmental, lifecycle, and enclosure requirements rather than infer industrial suitability from the MCU architecture alone.
Recomendado
USB Connected Test and Measurement Box
The four-port hub function can serve as the connectivity centerpiece in a compact USB test or measurement enclosure, while the microcontroller manages local commands and front-panel signaling. Eleven GPIOs provide enough discrete I/O for LEDs, switches, relay enables, or status inputs, with a typical 7 mA sink capability documented per pin. The 48 MHz core and 8 KB OTP support embedded control, but the supplied evidence does not identify RAM, analog interfaces, precision timing, or firmware examples. Those constraints should be checked before selecting it for waveform capture, instrumentation, or calibration-heavy functions.
Recomendado
Legacy USB Peripheral Upgrade
The CY7C65113C-SXC can support a legacy full-speed USB peripheral upgrade where existing software expects an eight-bit Cypress-compatible control environment. Verified references identify the associated CY3654 and CY3654-P03 development kits and describe the MCU as an 8 KB OTP device with 11 GPIO outputs. Retrofitting an existing board still requires exact verification of package pins, firmware image compatibility, oscillator requirements, USB transceiver integration, and supply levels. The part should not be assumed compatible with unrelated USB devices merely because all use the same 28-pin SOIC format.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para CY7C65113C-SXC — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Notas de diseño
Treat the USB connector, protection network, and controller traces as a controlled-impedance subsystem rather than ordinary digital routing. The supplied sources identify a full-speed four-port hub but do not provide trace lengths, impedance values, topology, or connector recommendations. Use the manufacturer's reference layout and USB implementation guidance after confirming them from the datasheet; do not infer these details from the 48 MHz CPU clock.
Verify downstream power budgets, current limits, protection behavior, and required power-management connections before finalizing a four-port hub board. The verified data documents 7 mA typical GPIO sink capability, but that value is not a USB downstream-port current rating and must not be used for downstream power planning. Check the datasheet for port-current behavior, bus-power requirements, voltage tolerances, and decoupling values because those values are absent from the supplied search data.
Do not treat SOIC-28 package similarity, the term microcontroller, or a distributor similarity score as proof of drop-in compatibility. The searched candidates include package, architecture, and ordering differences, while CY7C65113-SC and CY7C65113C-SXCT appear to be related ordering formats rather than distinct substitutes. A valid alternative requires identical pin functions, USB behavior, firmware support, electrical limits, power configuration, and lifecycle requirements.
Información de cumplimiento
The Lisleapex listing identifies the SOIC-28 device as ROHS approved. No verified REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals evidence was supplied; AEC-Q100 is marked not applicable because this is a commercial USB hub microcontroller rather than an evidenced automotive-qualified variant.
