Infineon

CY8C4245AXI-473 - 48MHz Cortex-M0 MCU | Infineon

N.º de pieza: CY8C4245AXI-473 ✓ Activo
3 V to 5 V Vdss 44-pin TQFP Package 48 MHz Speed 32 KB Memory
MOQ: 1 |

CY8C4245AXI-473 Descripción general

The Infineon CY8C4245AXI-473 is a PSoC 4 programmable system-on-chip microcontroller built around a 32-bit Arm Cortex-M0 processor operating at 48 MHz. It integrates 32 KB of flash memory, 4 KB of SRAM, and a 12-bit successive-approximation ADC in a 44-pin TQFP package measuring 10 mm by 10 mm. The device combines a conventional microcontroller core with programmable digital and analog resources in one integrated system-on-chip.

A PSoC 4 is a programmable system-on-chip, a category of microcontroller that integrates a CPU, memory, analog conversion, digital programmable logic, and configurable peripherals. It sits within the hierarchy of embedded processing components, alongside general-purpose microcontrollers, MCUs, and semiconductors. Its configurable resources allow designers to adapt signal acquisition, control, and communication behavior without relying entirely on fixed peripheral functions.

Key features include a 48 MHz Cortex-M0 core, 32 KB of programmable flash, 4 KB of SRAM, and a 12-bit SAR ADC. The ARM Cortex-M0 architecture supports efficient event-driven control and low-cost embedded applications. Its 44-TQFP package provides 44 external connections and is intended for compact, surface-mounted industrial control and embedded-instrumentation designs.

The PSoC 4 architecture integrates programmable digital blocks, analog resources, and dedicated peripherals around the Cortex-M0 processor. The 12-bit SAR ADC supports measurements from analog sensors and process-control inputs, while the 32 KB flash region accommodates application firmware, configuration data, and boot code. The 4 KB SRAM provides working memory for control loops, peripheral configuration, and application state.

Typical uses include industrial sensor controllers, compact test and measurement instruments, building-control modules, consumer accessories, and low-cost embedded control systems. The microcontroller is particularly appropriate when a product needs several analog inputs, programmable digital logic, and conventional firmware control on a single board.

PCB planning should preserve the 10 mm by 10 mm TQFP-44 land pattern and provide unobstructed routing for power, ground, programming signals, and analog inputs. Follow the manufacturer datasheet for the exact pin assignments, decoupling requirements, clock configuration, programming connections, and exposed thermal and layout requirements.

This page combines manufacturer specifications, package and programming references, application guidance, and verified lifecycle information to support component selection, schematic review, PCB layout planning, and prototype bring-up for the CY8C4245AXI-473.

Alternativas directas para CY8C4245AXI-473 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

CY8C4245AXI-473 Valores máximos y características eléctricas

Product Type PSoC 4 programmable system-on-chip microcontroller
CPU Core Arm Cortex-M0, 32-bit
Maximum CPU Frequency 48 MHz
Program Flash Memory 32 KB
Flash Organization 32K x 8 bits
SRAM 4 KB
ADC Resolution 12 bits
ADC Architecture Successive-approximation converter
Tensión de alimentación 3 V to 5 V
Encapsulado 44-pin TQFP
Package Dimensions 10 mm x 10 mm
Tipo de montaje Surface mount
RoHS Compliance Unknown
REACH Compliance Unknown
AEC-Q100 Qualification Unknown

Guía de configuración de pines de CY8C4245AXI-473 10 mm x 10 mm

Configuración de pines para CY8C4245AXI-473 (encapsulado 10 mm x 10 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 10 mm x 10 mm para CY8C4245AXI-473

No hay datos detallados de patillaje disponibles para CY8C4245AXI-473.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

CY8C4245AXI-473 es adecuado para 6 aplicacións: Industrial Sensor Controller, Building Control Module, Test and Measurement Instrument, Portable Consumer Accessory, Smart Sensor Node, LED Lighting Controller.

🏭

Industrial Sensor Controller

The CY8C4245AXI-473 fits compact industrial sensor controllers that need measurement and embedded processing in one component. Its 12-bit SAR ADC acquires analog sensor information, while the 48 MHz Arm Cortex-M0 core performs filtering, threshold decisions, calibration, and communication tasks. The 32 KB flash stores operating firmware and configuration data, and the 4 KB SRAM supports temporary measurement and control state. Using the PSoC 4 programmable resources can reduce the need for separate logic, although final accuracy depends on the sensor, analog conditioning, reference design, and grounding arrangement.

🏭

Building Control Module

The CY8C4245AXI-473 is appropriate for building-control modules that combine sensor inputs with local actuator logic. A 48 MHz Cortex-M0 processor can supervise thresholds, schedules, alarms, and communication tasks, while the integrated 12-bit SAR ADC handles compatible analog inputs from environmental or occupancy sensors. With 32 KB of flash and 4 KB of SRAM, the device supports compact firmware without an external memory device in many designs. Deployment requires careful partitioning of analog and digital return currents plus protection for external wiring and field-connected interfaces.

🔧

Test and Measurement Instrument

The CY8C4245AXI-473 can serve as the control core of a compact test or measurement instrument where programmable acquisition and digital processing are valuable. The 12-bit SAR ADC provides the analog conversion function, and the 48 MHz Cortex-M0 processor can execute acquisition sequencing, digital filtering, limit checks, calibration routines, and data formatting. Its 32 KB flash and 4 KB SRAM suit compact applications with moderate code size and working-memory requirements. Accuracy and usable bandwidth must be evaluated against the target signal, acquisition network, reference voltage, and calibration method.

📱

Portable Consumer Accessory

The CY8C4245AXI-473 can support portable accessories that combine capacitive or resistive sensing, local control, and a low-power communications interface. The PSoC 4 programmable resources allow designers to implement custom sensing and logic functions, while the 48 MHz Cortex-M0 core handles application state and user-interface behavior. The 3 V to 5 V operating range supports integration with common embedded supply rails, and the 10 mm by 10 mm TQFP package simplifies compact surface-mount layouts. Battery-powered designs should evaluate average current, sleep behavior, and peripheral activity using the current manufacturer datasheet.

🧩

Smart Sensor Node

The CY8C4245AXI-473 fits smart sensor nodes that acquire an analog signal, apply local processing, and communicate its status. Its 12-bit SAR ADC handles compatible sensor outputs, the 32-bit Cortex-M0 core executes scaling and filtering, and the 32 KB flash reserves space for firmware and calibration parameters. The 4 KB SRAM supports protocol buffers and real-time state without requiring a separate microcontroller. For reliable operation, use a clean reference and supply arrangement, isolate sensitive analog routing from digital activity, and validate the complete channel against the required measurement range and accuracy.

💡

LED Lighting Controller

The CY8C4245AXI-473 can act as the central controller in an LED lighting module that requires sequencing, current-control coordination, monitoring, and configuration storage. Its 48 MHz Cortex-M0 processor manages timing and control tasks, while programmable digital and analog resources support customized signal generation, sensing, or fault detection. The 32 KB flash provides room for lighting effects, calibration, and communication routines, and the 4 KB SRAM can hold state for multiple channels. Power-stage design remains separate from the MCU, so validate switching layout, thermal conditions, dimming behavior, and fault handling as a complete system.

What is the CY8C4245AXI-473?
The CY8C4245AXI-473 is a 48 MHz Arm Cortex-M0 PSoC 4 microcontroller with 32 KB of flash, 4 KB of SRAM, and a 12-bit SAR ADC. According to the Infineon product page and manufacturer datasheet, it integrates programmable digital and analog resources with a conventional embedded processor in a 44-pin TQFP package. The part is intended for compact embedded-control and signal-acquisition designs where a microcontroller and programmable analog interface are needed in one device.
What are the key specifications of CY8C4245AXI-473 that engineers should know?
The CY8C4245AXI-473 combines a 32-bit Arm Cortex-M0 processor, 48 MHz operating frequency, 32 KB flash, 4 KB SRAM, and a 12-bit SAR ADC. According to the Infineon manufacturer datasheet, it is offered in a surface-mount 44-pin TQFP package measuring 10 mm by 10 mm and operates from a 3 V to 5 V supply. These figures define its core processing, memory, conversion, voltage, and packaging envelope.
Where can I download the CY8C4245AXI-473 datasheet PDF?
The CY8C4245AXI-473 manufacturer datasheet can be located through the Infineon product page at https://www.infineon.com/part/CY8C4245AXI-473. The official page provides the part parameters, datasheet access, and ordering information. The device also appears in a 45-page PSoC 4 datasheet listing, but use the current Infineon documentation for the authoritative pin assignments, electrical limits, programming procedure, and package drawings.
Where can I find the CY8C4245AXI-473 pinout and package drawing?
Use the pin-description table and package drawing in the Infineon manufacturer datasheet for the CY8C4245AXI-473. The component is a 44-pin TQFP with a 10 mm by 10 mm body, so its land pattern must match the TQFP-44 footprint. Assign power, ground, programming, clock, communications, and analog signals from the official pin table rather than inferring them from another PSoC 4 package.
What can replace the CY8C4245AXI-473?
A valid drop-in replacement for the CY8C4245AXI-473 must use the same 44-pin TQFP footprint, provide pin-to-pin compatibility, and preserve its 48 MHz, 32 KB flash, 4 KB SRAM, 12-bit ADC, and 3 V to 5 V operating characteristics. No manufacturer-confirmed drop-in substitute was identified for this exact orderable part. Treat devices with different pin counts or PSoC 4 resources as redesign candidates rather than drop-in replacements.
Is CY8C4245AXI-473 the same as another PSoC 4 microcontroller?
The CY8C4245AXI-473 is not interchangeable with every PSoC 4 device merely because it uses the same Cortex-M0 family. It specifically combines a 48 MHz processor, 32 KB flash, 4 KB SRAM, a 12-bit SAR ADC, and a 44-pin TQFP package according to the Infineon manufacturer datasheet. Differences in pin assignment, memory, analog resources, clocking, or peripheral mapping can require firmware, schematic, and PCB changes.
CY8C4245AXI-473 vs CY8C4245AXI-483 - which one should be selected?
The CY8C4245AXI-473 should be selected when the design requires the documented 48 MHz Cortex-M0 core, 32 KB flash, 4 KB SRAM, 12-bit SAR ADC, and 44-pin TQFP configuration. The CY8C4245AXI-483 appears in document-search terminology, but its ordering details, electrical limits, and pin compatibility must be confirmed from the current manufacturer documentation. Do not substitute it without checking the complete datasheet and package drawing.
When should I choose the CY8C4245AXI-473 for an embedded control design?
Choose the CY8C4245AXI-473 when a compact system needs a 48 MHz Cortex-M0 controller, 32 KB flash, 4 KB SRAM, and a 12-bit SAR ADC without a separate analog converter. The Infineon manufacturer datasheet identifies the device as a PSoC 4 with programmable system-on-chip resources, making it suitable for sensor interfaces, compact controllers, and embedded measurement systems. It is less appropriate when a different pinout or greater memory capacity is required.
Is the CY8C4245AXI-473 suitable for industrial sensor acquisition?
The CY8C4245AXI-473 is suitable for many industrial sensor-acquisition designs because it combines a 12-bit SAR ADC, 48 MHz Cortex-M0 processor, 32 KB flash, and 4 KB SRAM in one 44-pin TQFP device. According to the Infineon manufacturer datasheet, the SAR ADC is designed for analog-to-digital conversion while the programmable system-on-chip resources support customized signal paths. Final suitability depends on sensor ranges, accuracy, isolation, environmental requirements, and the selected operating-temperature grade.
How should the CY8C4245AXI-473 be programmed?
Program the CY8C4245AXI-473 through the programming interface and voltage specified in the Infineon manufacturer datasheet. The search results identify an industry programming device for the Infineon CY8C4245AXI-473 in QFP44, confirming that dedicated production programming is available. Exact protocol signals, connector arrangement, security settings, and firmware-loading steps should be taken from the current programming guide and the selected board implementation.
What are the power and decoupling considerations for CY8C4245AXI-473?
The CY8C4245AXI-473 operates from 3 V to 5 V and requires a clean supply for its processor, memory, analog converter, and peripherals. Place the decoupling network close to the appropriate power and ground pins using the values and topology shown in the Infineon manufacturer datasheet. Keep analog and digital return paths controlled, especially when the 12-bit SAR ADC is measuring low-level sensor signals, because switching-current coupling can degrade conversion results.
Is CY8C4245AXI-473 in stock and what is its lead time?
Current stock and manufacturing lead time should be confirmed through the Request a Quote form on this page. The manufacturer product page provides ordering information for the CY8C4245AXI-473, while distributor search results indicate that the exact part is actively offered. Use the quote form to request current availability, minimum order quantity, packaging, lead time, and shipment configuration for your project.
Where can I buy CY8C4245AXI-473 online?
The CY8C4245AXI-473 can be requested through the Request a Quote form on this page for current availability, lot traceability, and order handling. The exact MPN is listed for order by Infineon Technologies and appears in catalog results under both Infineon and Cypress Semiconductor naming. Quote requests are the appropriate route for checking package form, stock, and project-specific lead time without relying on stale catalog availability.
What is the price of CY8C4245AXI-473?
Use the Request a Quote form on this page for the current price of the CY8C4245AXI-473. Pricing can vary with order quantity, package form, traceability, and current supply. The structured purchasing information on this page is updated separately from the technical content, allowing the commercial response to reflect the current quotation rather than an outdated catalog amount.
Does CY8C4245AXI-473 meet RoHS, REACH, or AEC-Q100 requirements?
The RoHS, REACH, and AEC-Q100 status of the CY8C4245AXI-473 must be confirmed from the current Infineon product documentation and declaration for the exact ordering code. The available manufacturer page identifies the device as a PSoC 4 microcontroller in a 44-pin TQFP package but does not establish every compliance declaration in the technical summary. Confirm material, environmental, and automotive qualification requirements before releasing a regulated design.

Datos de referencia de ingeniería para CY8C4245AXI-473 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the CY8C4245AXI-473 for a compact embedded design that specifically requires a 48 MHz Arm Cortex-M0 PSoC 4 with 32 KB flash, 4 KB SRAM, a 12-bit SAR ADC, and a 44-pin TQFP package. It is well aligned with industrial sensing, compact instrumentation, building-control modules, smart sensor nodes, and programmable LED-control products. The primary selection requirement is that its memory, ADC, voltage range, peripheral configuration, and pin assignments match the target PCB and firmware. No manufacturer-confirmed drop-in replacement was identified for the exact ordering code, so a proposed alternative should not be approved until its package drawing, pinout, electrical limits, memory map, programming method, and peripheral resources have been compared. Functional similarity alone does not establish drop-in compatibility.

Comparación con alternativas

Parámetro Este producto
Brand Infineon Technologies
Package 44-pin TQFP
Product Type PSoC 4 microcontroller
CPU Core Arm Cortex-M0, 32-bit
Maximum CPU Frequency 48 MHz
Program Flash Memory 32 KB
SRAM 4 KB
ADC Resolution 12-bit SAR ADC
Supply Voltage 3 V to 5 V

Diferenciadores clave

  • Integrated programmable analog and digital system-on-chip architecture (frente a CY8C4245AXI-483)
  • Defined memory and processing configuration (frente a CY8C4245AXI-483)
  • Compact standardized surface-mount package (frente a CY8C4245AXI-483)

Notas de diseño

Route the TQFP-44 footprint strictly from the official package drawing and pin-description table. Keep programming signals accessible, maintain short return paths for supply and ground, and place required decoupling capacitors adjacent to the relevant device pins. Because PSoC 4 devices combine analog conversion, programmable digital logic, and processor circuitry, preserve the manufacturer's recommended partition between sensitive analog routing and higher-current digital paths.

Treat the 12-bit SAR ADC as a precision measurement channel. Use the reference and source-impedance arrangements specified in the manufacturer datasheet, keep analog traces short, and avoid routing them beneath switching nodes or digital clock signals. A reference with low noise is as important as ADC resolution because reference variation can introduce conversion error. Validate the complete front end with the intended source impedance, acquisition time, settling behavior, and calibration strategy.

Design the 3 V to 5 V supply path for both startup and steady-state demand across the selected clock speed and active peripherals. Follow the manufacturer's capacitor values, placement, and sequencing guidance. If the board combines a switching converter with analog measurement circuitry, isolate feedback and reference routing from high-current paths, and check converter startup behavior so the MCU and ADC do not begin operating outside their specified supply limits.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The manufacturer product page confirms the device identity and technical configuration but does not establish the requested compliance declarations in the available product summary. Confirm the current declarations for the exact ordering code before production release.

Datos verificados el: 2026-11-19 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

cy8c4245axi 483 datasheet cy8c4245axi 483 datasheet pdf CY8C4245AXI-473 datasheet CY8C4245AXI-473 datasheet pdf CY8C4245AXI-473 pinout CY8C4245AXI-473 TQFP-44 footprint CY8C4245AXI-473 equivalent CY8C4245AXI-473 replacement CY8C4245AXI-473 price CY8C4245AXI-473 stock Infineon CY8C4245AXI-473 CY8C4245AXI-473 48MHz Cortex-M0 CY8C4245AXI-473 12-bit SAR ADC CY8C4245AXI-473 application circuit

Componentes & términos relacionados

Infineon Technologies Cypress Semiconductor CY8C4245AXI-473 CY8C4245AXI-483 PSoC 4 PSoC 4200 programmable system-on-chip microcontroller MCU Arm Cortex-M0 32-bit processor 48 MHz 32 KB flash memory 4 KB SRAM 12-bit SAR ADC successive-approximation converter 44-pin TQFP TQFP package family surface-mount technology 3 V to 5 V power supply industrial sensor controller test and measurement instrument RoHS REACH
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ