CY8C4245AXI-473 - 48MHz Cortex-M0 MCU | Infineon
料号: CY8C4245AXI-473 ✓ 量产中CY8C4245AXI-473 概述
A PSoC 4 is a programmable system-on-chip, a category of microcontroller that integrates a CPU, memory, analog conversion, digital programmable logic, and configurable peripherals. It sits within the hierarchy of embedded processing components, alongside general-purpose microcontrollers, MCUs, and semiconductors. Its configurable resources allow designers to adapt signal acquisition, control, and communication behavior without relying entirely on fixed peripheral functions.
Key features include a 48 MHz Cortex-M0 core, 32 KB of programmable flash, 4 KB of SRAM, and a 12-bit SAR ADC. The ARM Cortex-M0 architecture supports efficient event-driven control and low-cost embedded applications. Its 44-TQFP package provides 44 external connections and is intended for compact, surface-mounted industrial control and embedded-instrumentation designs.
The PSoC 4 architecture integrates programmable digital blocks, analog resources, and dedicated peripherals around the Cortex-M0 processor. The 12-bit SAR ADC supports measurements from analog sensors and process-control inputs, while the 32 KB flash region accommodates application firmware, configuration data, and boot code. The 4 KB SRAM provides working memory for control loops, peripheral configuration, and application state.
Typical uses include industrial sensor controllers, compact test and measurement instruments, building-control modules, consumer accessories, and low-cost embedded control systems. The microcontroller is particularly appropriate when a product needs several analog inputs, programmable digital logic, and conventional firmware control on a single board.
PCB planning should preserve the 10 mm by 10 mm TQFP-44 land pattern and provide unobstructed routing for power, ground, programming signals, and analog inputs. Follow the manufacturer datasheet for the exact pin assignments, decoupling requirements, clock configuration, programming connections, and exposed thermal and layout requirements.
This page combines manufacturer specifications, package and programming references, application guidance, and verified lifecycle information to support component selection, schematic review, PCB layout planning, and prototype bring-up for the CY8C4245AXI-473.
直接替换替代料: CY8C4245AXI-473 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料CY8C4245AXI-473 最大额定值与电气特性
| Product Type | PSoC 4 programmable system-on-chip microcontroller |
| CPU Core | Arm Cortex-M0, 32-bit |
| Maximum CPU Frequency | 48 MHz |
| Program Flash Memory | 32 KB |
| Flash Organization | 32K x 8 bits |
| SRAM | 4 KB |
| ADC Resolution | 12 bits |
| ADC Architecture | Successive-approximation converter |
| 电源电压 | 3 V to 5 V |
| 封装 | 44-pin TQFP |
| Package Dimensions | 10 mm x 10 mm |
| 安装类型 | Surface mount |
| RoHS Compliance | Unknown |
| REACH Compliance | Unknown |
| AEC-Q100 Qualification | Unknown |
CY8C4245AXI-473 10 mm x 10 mm 引脚配置指南
CY8C4245AXI-473(10 mm x 10 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: CY8C4245AXI-473.
请参阅 数据手册 以查看完整引脚配置。
典型应用
CY8C4245AXI-473 适用于 6 应用s: Industrial Sensor Controller, Building Control Module, Test and Measurement Instrument, Portable Consumer Accessory, Smart Sensor Node, LED Lighting Controller.
Industrial Sensor Controller
The CY8C4245AXI-473 fits compact industrial sensor controllers that need measurement and embedded processing in one component. Its 12-bit SAR ADC acquires analog sensor information, while the 48 MHz Arm Cortex-M0 core performs filtering, threshold decisions, calibration, and communication tasks. The 32 KB flash stores operating firmware and configuration data, and the 4 KB SRAM supports temporary measurement and control state. Using the PSoC 4 programmable resources can reduce the need for separate logic, although final accuracy depends on the sensor, analog conditioning, reference design, and grounding arrangement.
Building Control Module
The CY8C4245AXI-473 is appropriate for building-control modules that combine sensor inputs with local actuator logic. A 48 MHz Cortex-M0 processor can supervise thresholds, schedules, alarms, and communication tasks, while the integrated 12-bit SAR ADC handles compatible analog inputs from environmental or occupancy sensors. With 32 KB of flash and 4 KB of SRAM, the device supports compact firmware without an external memory device in many designs. Deployment requires careful partitioning of analog and digital return currents plus protection for external wiring and field-connected interfaces.
Test and Measurement Instrument
The CY8C4245AXI-473 can serve as the control core of a compact test or measurement instrument where programmable acquisition and digital processing are valuable. The 12-bit SAR ADC provides the analog conversion function, and the 48 MHz Cortex-M0 processor can execute acquisition sequencing, digital filtering, limit checks, calibration routines, and data formatting. Its 32 KB flash and 4 KB SRAM suit compact applications with moderate code size and working-memory requirements. Accuracy and usable bandwidth must be evaluated against the target signal, acquisition network, reference voltage, and calibration method.
Portable Consumer Accessory
The CY8C4245AXI-473 can support portable accessories that combine capacitive or resistive sensing, local control, and a low-power communications interface. The PSoC 4 programmable resources allow designers to implement custom sensing and logic functions, while the 48 MHz Cortex-M0 core handles application state and user-interface behavior. The 3 V to 5 V operating range supports integration with common embedded supply rails, and the 10 mm by 10 mm TQFP package simplifies compact surface-mount layouts. Battery-powered designs should evaluate average current, sleep behavior, and peripheral activity using the current manufacturer datasheet.
Smart Sensor Node
The CY8C4245AXI-473 fits smart sensor nodes that acquire an analog signal, apply local processing, and communicate its status. Its 12-bit SAR ADC handles compatible sensor outputs, the 32-bit Cortex-M0 core executes scaling and filtering, and the 32 KB flash reserves space for firmware and calibration parameters. The 4 KB SRAM supports protocol buffers and real-time state without requiring a separate microcontroller. For reliable operation, use a clean reference and supply arrangement, isolate sensitive analog routing from digital activity, and validate the complete channel against the required measurement range and accuracy.
LED Lighting Controller
The CY8C4245AXI-473 can act as the central controller in an LED lighting module that requires sequencing, current-control coordination, monitoring, and configuration storage. Its 48 MHz Cortex-M0 processor manages timing and control tasks, while programmable digital and analog resources support customized signal generation, sensing, or fault detection. The 32 KB flash provides room for lighting effects, calibration, and communication routines, and the 4 KB SRAM can hold state for multiple channels. Power-stage design remains separate from the MCU, so validate switching layout, thermal conditions, dimming behavior, and fault handling as a complete system.
工程参考数据: CY8C4245AXI-473 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Infineon Technologies |
| Package | 44-pin TQFP |
| Product Type | PSoC 4 microcontroller |
| CPU Core | Arm Cortex-M0, 32-bit |
| Maximum CPU Frequency | 48 MHz |
| Program Flash Memory | 32 KB |
| SRAM | 4 KB |
| ADC Resolution | 12-bit SAR ADC |
| Supply Voltage | 3 V to 5 V |
关键差异点
- Integrated programmable analog and digital system-on-chip architecture (对比 CY8C4245AXI-483)
- Defined memory and processing configuration (对比 CY8C4245AXI-483)
- Compact standardized surface-mount package (对比 CY8C4245AXI-483)
设计说明
Route the TQFP-44 footprint strictly from the official package drawing and pin-description table. Keep programming signals accessible, maintain short return paths for supply and ground, and place required decoupling capacitors adjacent to the relevant device pins. Because PSoC 4 devices combine analog conversion, programmable digital logic, and processor circuitry, preserve the manufacturer's recommended partition between sensitive analog routing and higher-current digital paths.
Treat the 12-bit SAR ADC as a precision measurement channel. Use the reference and source-impedance arrangements specified in the manufacturer datasheet, keep analog traces short, and avoid routing them beneath switching nodes or digital clock signals. A reference with low noise is as important as ADC resolution because reference variation can introduce conversion error. Validate the complete front end with the intended source impedance, acquisition time, settling behavior, and calibration strategy.
Design the 3 V to 5 V supply path for both startup and steady-state demand across the selected clock speed and active peripherals. Follow the manufacturer's capacitor values, placement, and sequencing guidance. If the board combines a switching converter with analog measurement circuitry, isolate feedback and reference routing from high-current paths, and check converter startup behavior so the MCU and ADC do not begin operating outside their specified supply limits.
合规信息
The manufacturer product page confirms the device identity and technical configuration but does not establish the requested compliance declarations in the available product summary. Confirm the current declarations for the exact ordering code before production release.