Maxim Integrated

DG401DY+T - 45Ω Dual SPST Analog Switch | Maxim Integrated

N.º de pieza: DG401DY+T ✓ Activo
5 V to 34 V Vdss 45 Ω Rds(on) 16-pin narrow SOIC Package
MOQ: 1 |

DG401DY+T Descripción general

The Maxim Integrated DG401DY+T is an improved dual, high-speed CMOS analog switch with two 1:1 SPST channels, 45Ω on-resistance, and a 16-pin narrow SOIC package. The switch is manufactured for production and is supplied in tape-and-reel packaging under the +T ordering suffix. Its principal characteristics include 20Ω typical on-resistance, 2Ω maximum on-resistance matching, 3Ω maximum on-resistance flatness, and 15pC maximum charge injection.

An analog switch is a semiconductor device that connects or disconnects signal paths under digital control. The DG401 belongs to the broader CMOS analog switch hierarchy, which sits between passive interconnects and more complex multiplexers. Two independent switches provide separate routing control for signals that must not share a common terminal configuration, while the low on-resistance supports relatively low insertion loss in signal paths.

The DG401 design emphasizes consistent behavior between its two channels. Guaranteed on-resistance matching of 2Ω maximum improves channel-to-channel uniformity, while 3Ω maximum on-resistance flatness helps maintain resistance across the operating signal range. The device also features low charge injection of 15pC maximum, reducing unwanted transient voltage when switching state changes. These characteristics are important in measurement, control, and signal-conditioning systems where switch-induced errors affect overall accuracy.

The manufacturer identifies the DG401 as an improved dual high-speed CMOS analog switch. The 45Ω rating in distributor catalog data represents the nominal catalog on-resistance associated with this ordering configuration, while the redesigned family is also described as having 20Ω typical on-resistance. Supply-voltage information associated with the DG401 family covers 5V to 34V and dual-supply ranges of ±5V to ±17V.

Typical uses include sample-and-hold signal paths, test-equipment routing, data-acquisition systems, analog measurement front ends, and dual-channel control interfaces. The two-channel structure is useful when a system needs two coordinated analog connections but does not require the channel count or architecture of a larger multiplexer. The 16-pin SOIC package also supports conventional surface-mount PCB assembly.

Designers should verify control-logic levels, allowable analog signal excursions, switching timing, and supply sequencing against the manufacturer datasheet before finalizing a circuit. Keep analog traces short, connect return currents cleanly, and provide stable supply bypassing near the device. The low charge injection and controlled on-resistance are valuable, but they do not eliminate errors caused by unsuitable control timing, excessive loading, or out-of-range signal voltages.

This product record combines the DG401's manufacturer specifications, distributor catalog parameters, package information, lifecycle status, and application-oriented engineering guidance. It also identifies verified same-footprint alternatives and distinguishes them from cross-package or functionally different switch architectures, helping engineers evaluate replacement decisions without changing the PCB land pattern.

Alternativas directas para DG401DY+T — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con DG401DY+T (mismo factor de forma y huella) — difiere en Number of Circuits, Package.

Analog Devices
Number of Circuits: 2 circuits
Package: 16-pin SOIC
Comparar con DG401DY+T →

DG401DY+

✅ Sustitución directa
Analog Devices
📦 16-SOIC
Dual high-speed analog switch IC · 2 circuits · 1:1 · Dual SPST normally open · 45 ohm · 20 ohm · 2 ohm maximum · 3 ohm maximum

Consulte el precio

Ver hoja de datos →

DG401DY-T

✅ Sustitución directa
📦 16-SOIC
On-resistance matches at 45Ω with a 0Ω nominal difference; switch count and configuration match at two 1:1 SPST channels

📋 Alternativa de referencia (no en el catálogo)

DG401DY+

✅ Sustitución directa
Analog Devices
📦 16-SOIC
Dual high-speed analog switch IC · 2 circuits · 1:1 · Dual SPST normally open · 45 ohm · 20 ohm · 2 ohm maximum · 3 ohm maximum

Consulte el precio

Ver hoja de datos →

DG401DY-T1

✅ Sustitución directa
📦 16-SOIC
On-resistance matches at 45Ω with a 0Ω nominal difference; switch count and configuration match at two 1:1 SPST channels

📋 Alternativa de referencia (no en el catálogo)

DG401DYZ

✅ Sustitución directa
📦 16-SOIC
Catalog on-resistance and configuration match at 45Ω and two 1:1 SPST channels with 0Ω nominal on-resistance difference

📋 Alternativa de referencia (no en el catálogo)

DG401DY+T Valores máximos y características eléctricas

Number of Circuits 2
Switch Configuration 1:1 SPST
Nominal On-Resistance 45 Ω
Typical On-Resistance 20 Ω
Maximum On-Resistance Matching 2 Ω
Maximum On-Resistance Flatness 3 Ω
Maximum Charge Injection 15 pC
Supply Voltage Range 5 V to 34 V
Dual Supply Voltage Range ±5 V to ±17 V
Switching Time 150 ns
Turn-On Time 100 ns
Rango de temperatura de funcionamiento 0°C to +70°C
Encapsulado 16-pin narrow SOIC
Tipo de montaje Surface Mount
Production Status Production
Estado RoHS Unknown

Guía de configuración de pines de DG401DY+T 16-pin narrow soic

Configuración de pines para DG401DY+T (encapsulado 16-pin narrow soic). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 16-pin narrow soic para DG401DY+T

No hay datos detallados de patillaje disponibles para DG401DY+T.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

DG401DY+T es adecuado para 6 aplicacións: Data Acquisition Signal Routing, Precision Test Equipment, Sample-and-Hold Signal Paths, Industrial Control Signal Isolation, Automotive and Vehicle Signal Switching, Analog Multiplexing Front Ends.

📡

Data Acquisition Signal Routing

The DG401DY+T fits two-channel analog routing in a data-acquisition front end because it provides two independent 1:1 SPST switches in a 16-pin SOIC package. Its 45Ω nominal on-resistance limits insertion loss in sensor and conditioning paths, while the manufacturer's 3Ω maximum on-resistance flatness specification helps preserve signal integrity as analog voltage changes. The two switches can select separate inputs, isolate measurement channels, or support coordinated sampling. Because charge injection remains a factor, designers should use the 15pC maximum specification when estimating settling errors after a control transition and should keep source impedances and control edges compatible with the application's timing requirements.

🖥️

Precision Test Equipment

The DG401DY+T is useful in precision test equipment that requires controlled connection of two analog measurement paths. The family provides guaranteed on-resistance matching of 2Ω maximum between the two switches, reducing channel-to-channel resistance variation during calibration and comparison measurements. A 3Ω maximum on-resistance flatness specification helps limit amplitude changes across the signal range, while 15pC maximum charge injection supports predictable transient control. The 16-pin narrow SOIC package simplifies routing on a densely populated measurement board. Engineers should still account for leakage, switch capacitance, off-state behavior, and control-logic timing when defining the measurement uncertainty and settling interval.

⚡

Sample-and-Hold Signal Paths

The DG401DY+T can support dual sample-and-hold paths when two independent SPST connections are sufficient for the circuit topology. Its 45Ω nominal on-resistance provides a defined series resistance for the switched path, and the low charge injection of 15pC maximum helps limit the control-edge disturbance delivered to downstream circuitry. The improved family's 2Ω maximum on-resistance matching also helps maintain channel-to-channel consistency when the two paths perform related sampling operations. The device is best used where switching speed, signal amplitude, and leakage requirements fit the 100ns turn-on and 150ns switching-time catalog figures. Control timing should include the complete settling interval rather than relying only on the nominal transition time.

🏭

Industrial Control Signal Isolation

The DG401DY+T is appropriate for industrial control boards that need to isolate or redirect two low- to moderate-frequency analog control signals. The dual 1:1 SPST configuration provides independent routing without the complexity of a larger multiplexer, and the 16-pin SOIC package offers a compact surface-mount implementation. A 45Ω nominal on-resistance is suitable for many actuator, sensor, and analog-control interfaces, provided the designer checks the load current and signal bandwidth. The 5V to 34V single-supply and ±5V to ±17V dual-supply ranges associated with the DG401 family support common industrial voltage architectures. Verify control thresholds, transient limits, and isolation requirements against the exact operating conditions.

🚗

Automotive and Vehicle Signal Switching

The DG401DY+T can be considered for vehicle electronic signal-routing functions when the electrical environment falls within the manufacturer's specified limits. Its two 1:1 SPST channels support independent connection of two analog or control paths, while the 20Ω typical family on-resistance and 3Ω maximum flatness provide useful baseline behavior for low-power routing. The 0°C to +70°C catalog temperature range must be checked against the vehicle's ambient and enclosure requirements. Automotive qualification and transient robustness are not established by this product record, so engineers should request the applicable manufacturer documentation before using the device in safety-critical or electrically noisy vehicle systems.

🔧

Analog Multiplexing Front Ends

The DG401DY+T is suited to small front ends that require two switching positions rather than a full multiplexer. The pair of SPST channels may be arranged for source selection, signal isolation, or coordinated routing between analog and control stages. The manufacturer's 2Ω maximum on-resistance matching improves consistency between the two paths, while 15pC maximum charge injection helps control transient disturbances after switching. Its 16-pin SOIC footprint simplifies assembly and keeps the device compatible with conventional surface-mount routing. The main limitation is architectural: the DG401 is not a high-channel-count multiplexer, so designs requiring eight or more analog inputs will need a different device family and a different PCB land pattern.

Resumen de productos recomendados

DG401DY Same dual 1:1 SPST architecture in a 16-SOIC footprint Se usa en: Data Acquisition Signal Routing, Precision Test Equipment, Sample-and-Hold Signal Paths, Industrial Control Signal Isolation, Analog Multiplexing Front Ends DG401DYZ Pin-compatible dual analog switch alternative Se usa en: Data Acquisition Signal Routing, Automotive and Vehicle Signal Switching DG401DY-T1 Dual 45Ω 1:1 SPST switch in a 16-SOIC package Se usa en: Precision Test Equipment, Industrial Control Signal Isolation, Analog Multiplexing Front Ends DG401DY-T Same dual SPST switching topology and package Se usa en: Sample-and-Hold Signal Paths, Automotive and Vehicle Signal Switching
What is the DG401DY+T?
The DG401DY+T is an improved dual, high-speed CMOS analog switch with two 1:1 SPST channels, a 45Ω nominal on-resistance, and a 16-pin narrow SOIC package. According to the Maxim Integrated DG401 product page, the redesigned family provides guaranteed on-resistance matching of 2Ω maximum, on-resistance flatness of 3Ω maximum, and charge injection of 15pC maximum.
Where can I download the DG401DY+T datasheet PDF?
The official DG401 documentation is available from the Maxim Integrated product page at analog.com/en/products/dg401.html, which links the DG401 Data Sheet Rev. 2. The same document defines the switch characteristics, electrical ratings, pin configuration, and operating conditions. Use the manufacturer document as the controlling source when laying out the 16-pin SOIC footprint.
Where can I find the DG401DY+T pinout?
The DG401DY+T pin configuration is defined in the pin-description section of the official DG401 Data Sheet Rev. 2. The device uses a 16-pin narrow SOIC package, so the PCB footprint must follow the manufacturer's pin numbering and terminal definitions rather than relying on a generic SOIC drawing. Use the package drawing for exposed-pad or copper-keepout details, if any.
What are the key specifications of DG401DY+T?
The principal DG401DY+T specifications are two 1:1 SPST channels, 45Ω nominal on-resistance, 20Ω typical on-resistance, 2Ω maximum channel matching, 3Ω maximum on-resistance flatness, and 15pC maximum charge injection. According to the Maxim Integrated DG401 product page, the device is an improved dual, high-speed CMOS analog switch in a 16-pin SOIC package.
Is the DG401DY+T a drop-in replacement for DG401DY?
The DG401DY and DG401DY+T use the same 16-pin SOIC switch architecture and are identified in catalog listings as dual 1:1 SPST devices with 45Ω on-resistance. The ordering suffixes can differ by manufacturer and packaging, so engineers should confirm control-pin assignments and electrical limits in the applicable datasheet. The +T suffix identifies tape-and-reel ordering for the Maxim Integrated version.
What can replace the DG401DY+T?
The closest drop-in candidates are the same 16-pin SOIC, dual 1:1 SPST DG401 variants offered by Renesas Electronics and Vishay. These candidates match the target's two-circuit architecture and 45Ω catalog on-resistance. Before replacing the device, verify control polarity, supply ratings, switching timing, and channel-specific pin assignments in the selected manufacturer's datasheet.
DG401DY+T vs DG401DY — which version should I choose?
Choose the DG401DY+T when your assembly requires Maxim Integrated's tape-and-reel ordering configuration for the 16-pin SOIC package. Choose the base DG401DY designation when the available manufacturer suffix, packaging, and assembly method better match the procurement. Both describe the same dual 1:1 SPST architecture with 45Ω nominal on-resistance, but the approved manufacturer and ordering code must match the BOM.
When should I choose DG401DY+T over another analog switch?
Choose the DG401DY+T when the design needs exactly two independent 1:1 SPST channels in a standard 16-pin narrow SOIC footprint and benefits from low 15pC maximum charge injection. It is particularly suitable for compact measurement and control paths where two coordinated switches are sufficient. Select a multiplexed or higher-channel-count device only when the routing architecture requires more than two analog connections.
Is the DG401DY+T suitable for test and measurement equipment?
The DG401DY+T is suitable for test and measurement signal routing because it combines a dual 1:1 SPST configuration with controlled on-resistance matching of 2Ω maximum and flatness of 3Ω maximum. According to the Maxim Integrated DG401 product page, its 15pC maximum charge injection also limits transient switching errors. Final suitability still depends on signal range, bandwidth, and leakage requirements.
How much power does the DG401DY+T dissipate?
The DG401DY+T dissipation depends on the selected supply voltage, current state, and signal conditions, so no single fixed dissipation value applies. Estimated: with a 10V supply and 45Ω on-resistance in the conducting state, the conducting path has an approximate I²R value of 2.22mW at 1mA. Check the datasheet limits against the actual load and dual-supply operating mode.
What is the lead time for DG401DY+T?
A current production lead time for the exact DG401DY+T assembly should be confirmed through the Request a Quote form on this page. The manufacturer lists the DG401 in production, while order quantity and packaging requirements can affect scheduling. The same form can establish current availability, minimum order quantity, and the expected delivery schedule for the exact tape-and-reel part number.
Where can I buy DG401DY+T online?
Use the Request a Quote form on this page to request DG401DY+T availability, lead time, and a formal quotation for the exact 16-pin SOIC tape-and-reel ordering code. The manufacturer identifies the DG401 family as production, and the DG401DY+T is a standard catalog configuration. Quote requests avoid substituting a different manufacturer's suffix or a different package.
Is the DG401DY+T in stock?
Current DG401DY+T inventory should be confirmed through the Request a Quote form on this page because stock can vary by packaging quantity and manufacturing lot. The official DG401 product page identifies the family as production. Provide the required reel quantity and target delivery date in the request to obtain the most relevant availability response.
What is the price of DG401DY+T?
The current DG401DY+T quotation is available through the Request a Quote form on this page. Pricing can change with order quantity, reel configuration, and market conditions, so a formal quote is preferable to a static figure. The request should identify DG401DY+T exactly, including its tape-and-reel suffix and required commercial quantity.
Does DG401DY+T comply with RoHS and REACH requirements?
The manufacturer product page identifies the DG401 as a production device, while the available product records do not explicitly state the complete RoHS and REACH compliance status for this exact ordering suffix. Request the current manufacturer declaration or material compliance report through the Request a Quote form. Do not infer regulatory qualification solely from the device's production status.

Datos de referencia de ingeniería para DG401DY+T — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the Maxim Integrated DG401DY+T when the design needs exactly two independent 1:1 SPST switches in a 16-pin narrow SOIC footprint and requires a production tape-and-reel ordering configuration. Its 45Ω nominal on-resistance, 2Ω maximum matching, 3Ω maximum flatness, and 15pC maximum charge injection make it appropriate for controlled analog routing, data acquisition, and test-equipment paths. The Renesas DG401DY and DG401DY-T are strong same-footprint alternatives when that manufacturer's qualification and procurement are preferred. Vishay's DG401DY, DG401DY-T1, and DG401DYZ provide additional 16-SOIC options with the same dual 1:1, 45Ω catalog architecture, but their detailed matching, flatness, leakage, and timing limits should be compared with the application requirements. Do not choose a higher-channel-count quad switch when the PCB is designed specifically for the DG401 dual-channel pinout, and do not select a PDIP-16 option without a board redesign.

Comparación con alternativas

Parámetro Este producto DG401DY DG401DY-T DG401DY DG401DY-T1 DG401DYZ
Brand Maxim Integrated Renesas Electronics Renesas Electronics Vishay Intertechnology Vishay Intertechnology Vishay Intertechnology
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Number of Circuits 2 2 2 2 2 2
Switch Configuration 1:1 SPST 1:1 SPST 1:1 SPST 1:1 SPST 1:1 SPST 1:1 SPST
Nominal On-Resistance 45 Ω 45 Ω 45 Ω 45 Ω 45 Ω 45 Ω
Mounting Type Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount

Diferenciadores clave

  • Production-status dual switch with controlled channel behavior (frente a DG401DY)
  • Defined low on-resistance flatness for signal-path consistency (frente a DG401DY-T1)
  • Compact two-channel switching without a multiplexer footprint (frente a DG442DYZ)

Notas de diseño

Use the manufacturer's on-resistance matching and flatness limits when calculating channel-to-channel and signal-amplitude errors. The DG401 family specifies 2Ω maximum matching and 3Ω maximum flatness, which can limit insertion-loss variation in measurement paths. Include connector resistance and source impedance when calculating total path resistance, and keep switch control transitions away from sensitive amplifier inputs.

Do not treat 150ns switching time as the complete settling time after a control edge. Charge injection is specified at 15pC maximum, and its voltage effect depends on downstream capacitance and source impedance. Use the manufacturer timing and injection curves to establish an acquisition guard interval, especially in high-impedance amplifier stages where a small injected charge can create a meaningful transient.

Route the two analog channels symmetrically when channel-to-channel matching is important, and keep each switched node away from clocks, fast-edge control traces, and switching power inductors. Place bypass capacitors close to the supply and ground pins, maintain a continuous ground reference beneath the SOIC footprint where practical, and follow the official package drawing for pad dimensions rather than deriving them from a generic 16-pin SOIC drawing.

Confirm the allowable single-supply or dual-supply combination and control-logic thresholds before applying rails. The DG401 family is associated with 5V to 34V single-supply operation and ±5V to ±17V dual-supply operation. Keep signal excursions within the applicable input limits and avoid allowing control-pin voltages to exceed their specified range, particularly during power-up and shutdown.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

A distributor product record identifies the DG401DY+T as RoHS-related, but the available manufacturer and distributor records do not explicitly confirm the complete compliance status for this exact ordering suffix. No AEC-Q100 qualification is identified.

Datos verificados el: 2026-11-16 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

DG401DY+T datasheet DG401DY+T pinout DG401DY+T datasheet pdf DG401DY+T equivalent DG401DY+T replacement DG401DY+T cross reference DG401DY+T price DG401DY+T stock Maxim Integrated DG401DY+T DG401DY+T 45 ohm analog switch DG401DY+T 16-SOIC footprint DG401DY+T vs DG401DY

Componentes & términos relacionados

Maxim Integrated DG401DY+T DG401DY DG401DY-T DG401DY-T1 DG401DYZ analog switch CMOS analog switch SPST switch 1:1 switch multiplexer semiconductor 16-SOIC SOIC package family surface mount on-resistance on-resistance matching on-resistance flatness charge injection insertion loss signal routing data acquisition test equipment RoHS
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ