DG401DY+T - 45Ω Dual SPST Analog Switch | Maxim Integrated
MPN: DG401DY+T ✓ सक्रियDG401DY+T अवलोकन
An analog switch is a semiconductor device that connects or disconnects signal paths under digital control. The DG401 belongs to the broader CMOS analog switch hierarchy, which sits between passive interconnects and more complex multiplexers. Two independent switches provide separate routing control for signals that must not share a common terminal configuration, while the low on-resistance supports relatively low insertion loss in signal paths.
The DG401 design emphasizes consistent behavior between its two channels. Guaranteed on-resistance matching of 2Ω maximum improves channel-to-channel uniformity, while 3Ω maximum on-resistance flatness helps maintain resistance across the operating signal range. The device also features low charge injection of 15pC maximum, reducing unwanted transient voltage when switching state changes. These characteristics are important in measurement, control, and signal-conditioning systems where switch-induced errors affect overall accuracy.
The manufacturer identifies the DG401 as an improved dual high-speed CMOS analog switch. The 45Ω rating in distributor catalog data represents the nominal catalog on-resistance associated with this ordering configuration, while the redesigned family is also described as having 20Ω typical on-resistance. Supply-voltage information associated with the DG401 family covers 5V to 34V and dual-supply ranges of ±5V to ±17V.
Typical uses include sample-and-hold signal paths, test-equipment routing, data-acquisition systems, analog measurement front ends, and dual-channel control interfaces. The two-channel structure is useful when a system needs two coordinated analog connections but does not require the channel count or architecture of a larger multiplexer. The 16-pin SOIC package also supports conventional surface-mount PCB assembly.
Designers should verify control-logic levels, allowable analog signal excursions, switching timing, and supply sequencing against the manufacturer datasheet before finalizing a circuit. Keep analog traces short, connect return currents cleanly, and provide stable supply bypassing near the device. The low charge injection and controlled on-resistance are valuable, but they do not eliminate errors caused by unsuitable control timing, excessive loading, or out-of-range signal voltages.
This product record combines the DG401's manufacturer specifications, distributor catalog parameters, package information, lifecycle status, and application-oriented engineering guidance. It also identifies verified same-footprint alternatives and distinguishes them from cross-package or functionally different switch architectures, helping engineers evaluate replacement decisions without changing the PCB land pattern.
के लिए ड्रॉप-इन विकल्प DG401DY+T — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं DG401DY+T (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Number of Circuits, Package.
DG401DY+
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →DG401DY-T
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
DG401DY+
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →DG401DY-T1
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
DG401DYZ
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
DG401DY+T Maximum Ratings और Electrical Characteristics
| Number of Circuits | 2 |
| Switch Configuration | 1:1 SPST |
| Nominal On-Resistance | 45 Ω |
| Typical On-Resistance | 20 Ω |
| Maximum On-Resistance Matching | 2 Ω |
| Maximum On-Resistance Flatness | 3 Ω |
| Maximum Charge Injection | 15 pC |
| Supply Voltage Range | 5 V to 34 V |
| Dual Supply Voltage Range | ±5 V to ±17 V |
| Switching Time | 150 ns |
| Turn-On Time | 100 ns |
| ऑपरेटिंग तापमान रेंज | 0°C to +70°C |
| पैकेज | 16-pin narrow SOIC |
| माउंटिंग प्रकार | Surface Mount |
| Production Status | Production |
| RoHS स्थिति | Unknown |
DG401DY+T 16-pin narrow soic पिन कॉन्फ़िगरेशन गाइड
DG401DY+T (16-pin narrow soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: DG401DY+T.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
DG401DY+T के लिए उपयुक्त है 6 अनुप्रयोगs: Data Acquisition Signal Routing, Precision Test Equipment, Sample-and-Hold Signal Paths, Industrial Control Signal Isolation, Automotive and Vehicle Signal Switching, Analog Multiplexing Front Ends.
Data Acquisition Signal Routing
The DG401DY+T fits two-channel analog routing in a data-acquisition front end because it provides two independent 1:1 SPST switches in a 16-pin SOIC package. Its 45Ω nominal on-resistance limits insertion loss in sensor and conditioning paths, while the manufacturer's 3Ω maximum on-resistance flatness specification helps preserve signal integrity as analog voltage changes. The two switches can select separate inputs, isolate measurement channels, or support coordinated sampling. Because charge injection remains a factor, designers should use the 15pC maximum specification when estimating settling errors after a control transition and should keep source impedances and control edges compatible with the application's timing requirements.
अनुशंसित
Precision Test Equipment
The DG401DY+T is useful in precision test equipment that requires controlled connection of two analog measurement paths. The family provides guaranteed on-resistance matching of 2Ω maximum between the two switches, reducing channel-to-channel resistance variation during calibration and comparison measurements. A 3Ω maximum on-resistance flatness specification helps limit amplitude changes across the signal range, while 15pC maximum charge injection supports predictable transient control. The 16-pin narrow SOIC package simplifies routing on a densely populated measurement board. Engineers should still account for leakage, switch capacitance, off-state behavior, and control-logic timing when defining the measurement uncertainty and settling interval.
अनुशंसित
Sample-and-Hold Signal Paths
The DG401DY+T can support dual sample-and-hold paths when two independent SPST connections are sufficient for the circuit topology. Its 45Ω nominal on-resistance provides a defined series resistance for the switched path, and the low charge injection of 15pC maximum helps limit the control-edge disturbance delivered to downstream circuitry. The improved family's 2Ω maximum on-resistance matching also helps maintain channel-to-channel consistency when the two paths perform related sampling operations. The device is best used where switching speed, signal amplitude, and leakage requirements fit the 100ns turn-on and 150ns switching-time catalog figures. Control timing should include the complete settling interval rather than relying only on the nominal transition time.
अनुशंसित
Industrial Control Signal Isolation
The DG401DY+T is appropriate for industrial control boards that need to isolate or redirect two low- to moderate-frequency analog control signals. The dual 1:1 SPST configuration provides independent routing without the complexity of a larger multiplexer, and the 16-pin SOIC package offers a compact surface-mount implementation. A 45Ω nominal on-resistance is suitable for many actuator, sensor, and analog-control interfaces, provided the designer checks the load current and signal bandwidth. The 5V to 34V single-supply and ±5V to ±17V dual-supply ranges associated with the DG401 family support common industrial voltage architectures. Verify control thresholds, transient limits, and isolation requirements against the exact operating conditions.
अनुशंसित
Automotive and Vehicle Signal Switching
The DG401DY+T can be considered for vehicle electronic signal-routing functions when the electrical environment falls within the manufacturer's specified limits. Its two 1:1 SPST channels support independent connection of two analog or control paths, while the 20Ω typical family on-resistance and 3Ω maximum flatness provide useful baseline behavior for low-power routing. The 0°C to +70°C catalog temperature range must be checked against the vehicle's ambient and enclosure requirements. Automotive qualification and transient robustness are not established by this product record, so engineers should request the applicable manufacturer documentation before using the device in safety-critical or electrically noisy vehicle systems.
अनुशंसित
Analog Multiplexing Front Ends
The DG401DY+T is suited to small front ends that require two switching positions rather than a full multiplexer. The pair of SPST channels may be arranged for source selection, signal isolation, or coordinated routing between analog and control stages. The manufacturer's 2Ω maximum on-resistance matching improves consistency between the two paths, while 15pC maximum charge injection helps control transient disturbances after switching. Its 16-pin SOIC footprint simplifies assembly and keeps the device compatible with conventional surface-mount routing. The main limitation is architectural: the DG401 is not a high-channel-count multiplexer, so designs requiring eight or more analog inputs will need a different device family and a different PCB land pattern.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा DG401DY+T — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | DG401DY | DG401DY-T | DG401DY | DG401DY-T1 | DG401DYZ |
|---|---|---|---|---|---|---|
| Brand | Maxim Integrated | Renesas Electronics | Renesas Electronics | Vishay Intertechnology | Vishay Intertechnology | Vishay Intertechnology |
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Number of Circuits | 2 | 2 | 2 | 2 | 2 | 2 |
| Switch Configuration | 1:1 SPST | 1:1 SPST | 1:1 SPST | 1:1 SPST | 1:1 SPST | 1:1 SPST |
| Nominal On-Resistance | 45 Ω | 45 Ω | 45 Ω | 45 Ω | 45 Ω | 45 Ω |
| Mounting Type | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount |
मुख्य विशेषताएँ
- Production-status dual switch with controlled channel behavior (बनामDG401DY)
- Defined low on-resistance flatness for signal-path consistency (बनामDG401DY-T1)
- Compact two-channel switching without a multiplexer footprint (बनामDG442DYZ)
डिज़ाइन नोट्स
Use the manufacturer's on-resistance matching and flatness limits when calculating channel-to-channel and signal-amplitude errors. The DG401 family specifies 2Ω maximum matching and 3Ω maximum flatness, which can limit insertion-loss variation in measurement paths. Include connector resistance and source impedance when calculating total path resistance, and keep switch control transitions away from sensitive amplifier inputs.
Do not treat 150ns switching time as the complete settling time after a control edge. Charge injection is specified at 15pC maximum, and its voltage effect depends on downstream capacitance and source impedance. Use the manufacturer timing and injection curves to establish an acquisition guard interval, especially in high-impedance amplifier stages where a small injected charge can create a meaningful transient.
Route the two analog channels symmetrically when channel-to-channel matching is important, and keep each switched node away from clocks, fast-edge control traces, and switching power inductors. Place bypass capacitors close to the supply and ground pins, maintain a continuous ground reference beneath the SOIC footprint where practical, and follow the official package drawing for pad dimensions rather than deriving them from a generic 16-pin SOIC drawing.
Confirm the allowable single-supply or dual-supply combination and control-logic thresholds before applying rails. The DG401 family is associated with 5V to 34V single-supply operation and ±5V to ±17V dual-supply operation. Keep signal excursions within the applicable input limits and avoid allowing control-pin voltages to exceed their specified range, particularly during power-up and shutdown.
अनुपालन जानकारी
A distributor product record identifies the DG401DY+T as RoHS-related, but the available manufacturer and distributor records do not explicitly confirm the complete compliance status for this exact ordering suffix. No AEC-Q100 qualification is identified.