Texas Instruments

DP83847ALQA56AX - 10/100 Ethernet PHY | Texas Instruments

N.º de pieza: DP83847ALQA56AX ✓ Activo
3.0 V to 3.6 V Vdss 56-WQFN, 9 mm x 9 mm Package
MOQ: 1 |

DP83847ALQA56AX Descripción general

The Texas Instruments DP83847ALQA56AX is a 10/100-Mbps Ethernet physical-layer transceiver with 5-V-tolerant I/Os, supplied in a 56-WQFN surface-mount package. It supports 10BASE-T and 100BASE-TX operation over Category 3 or Category 5 unshielded twisted-pair cables through an external Ethernet transformer. The device provides one Ethernet transceiver channel, operates from a 3.0 V to 3.6 V supply according to the product listing, and includes the integrated physical-medium-dependent sublayers required for copper Ethernet connectivity.

An Ethernet PHY, or physical-layer transceiver, is the circuit that converts between digital Ethernet data and analog signals carried over twisted-pair wiring. It belongs to the network-interface hierarchy: Ethernet PHY, network interface controller, interface IC, and semiconductor. The DP83847 also supports the Parallel Detection function defined by the IEEE 802.3u specification. Parallel Detection allows both the 10 Mb/s and 100 Mb/s receivers to monitor the receive signal and report link status to the Auto-Negotiation function.

The principal benefits of this transceiver include support for both 10 Mb/s and 100 Mb/s links, 5-V-tolerant digital I/O operation, integrated PMD sublayers, and support for Category 3 or Category 5 cabling. The 56-WQFN package is intended for compact surface-mount designs, while the external transformer provides the physical isolation and impedance-matching interface between the PHY and the network cable. The exposed-pad construction also permits heat to spread through the PCB copper area.

The DP83847 family is suited to embedded systems, industrial Ethernet equipment, communications equipment, network-interface controllers, and other products that require a copper twisted-pair Ethernet port. Its parallel digital interface connects the PHY to a host processor or network controller, while the analog side connects through the customary external magnetics and center-tapped transmit/receive circuitry. The manufacturer describes the device as a full-feature single Physical Layer device with integrated PMD sublayers.

For a new design, the exact variant ordering information, exposed-pad layout, absolute maximum ratings, register map, and recommended application circuit should be taken directly from the manufacturer datasheet. The DP83847ALQA56AX product designation must also be checked against the required package suffix, temperature grade, lead-finish option, and tape-and-reel ordering code before release to production.

This page organizes the confirmed manufacturer and distributor information into a design-focused product record. It highlights the DP83847ALQA56AX as a 10/100-Mbps, 3.3-V Ethernet PHY in a 56-WQFN package, documents practical implementation considerations, identifies the directly supported ordering variant, and explains where a design must consult the DP83847 datasheet for pin-level and electrical details.

Alternativas directas para DP83847ALQA56AX — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

DP83847ALQA56AX/NOPB

✅ Sustitución directa
📦 56-WQFN (9x9)
Same DP83847 10/100 Ethernet PHY and listed 56-WQFN package; ordering suffix differs, with exact suffix-specific feature differences not quantified

📋 Alternativa de referencia (no en el catálogo)

DP83847ALQA56AX

✅ Sustitución directa
Texas Instruments
📦 56-WQFN (9x9)
Ethernet physical-layer transceiver · 10 Mb/s and 100 Mb/s · 10BASE-T and 100BASE-TX · Category 3 and Category 5 unshielded twisted pair · 1 channel · 3.0 V to 3.6 V · 5 V tolerant · Yes

Consulte el precio

Ver hoja de datos →

DP83847ALQA56AX Especificaciones

Product Type Ethernet physical-layer transceiver
Ethernet Data Rate 10 Mb/s and 100 Mb/s
Supported Protocols 10BASE-T and 100BASE-TX
Supported Cable Category 3 and Category 5 unshielded twisted pair
Transceiver Channels 1 channel
Tensión de alimentación 3.0 V to 3.6 V
Digital I/O Tolerance 5 V tolerant
Integrated PMD Sublayers Yes
Parallel Detection Supported as defined in IEEE 802.3u
External Transformer Required for twisted-pair media interface
Encapsulado 56-WQFN, 9 mm x 9 mm
Tipo de montaje Surface mount
Recuento de pines 56 pins
Exposed Thermal Pad Present
Ordering Variant DP83847ALQA56AX; DP83847ALQA56AX/NOPB also listed
Manufacturer Product Page Texas Instruments DP83847 product family

Guía de configuración de pines de DP83847ALQA56AX 56-wqfn, 9 mm x 9 mm

Configuración de pines para DP83847ALQA56AX (encapsulado 56-wqfn, 9 mm x 9 mm). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 56-wqfn, 9 mm x 9 mm para DP83847ALQA56AX

No hay datos detallados de patillaje disponibles para DP83847ALQA56AX.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

DP83847ALQA56AX es adecuado para 6 aplicacións: Industrial Ethernet Control Equipment, Embedded Network Interface, Communications Gateway, Network Interface Controller, Building Network Endpoint, Test and Measurement Instrument.

🏭

Industrial Ethernet Control Equipment

The DP83847ALQA56AX fits industrial Ethernet controllers, remote I/O products, and programmable automation equipment that require 10BASE-T or 100BASE-TX connectivity. Its 3.0 V to 3.6 V supply and 5-V-tolerant I/Os support integration with a 3.3-V host interface, while the 56-WQFN package preserves a compact land pattern. The external transformer provides the cable-side isolation stage. Confirm the exact temperature grade for the installation environment and use the manufacturer reference circuit to control magnetics layout, grounding, and high-frequency return paths.

🖥️

Embedded Network Interface

DP83847ALQA56AX is appropriate for embedded Linux, industrial controller, and communications gateways that expose a copper Ethernet port through a host processor or dedicated network controller. The transceiver handles the physical 10/100-Mbps layer, including integrated PMD functions, while the upper-layer controller manages framing and protocol services. Operating from 3.0 V to 3.6 V allows it to share a conventional 3.3-V power architecture, and the 5-V-tolerant I/Os simplify interfacing with compatible digital systems. Preserve the manufacturer-recommended reset, clock, decoupling, and transformer arrangements.

🌐

Communications Gateway

A communications gateway can use the DP83847ALQA56AX to add a 10/100-Mbps twisted-pair Ethernet port to equipment that already has a host-side parallel interface. Supporting both 10BASE-T and 100BASE-TX allows the PHY to negotiate operation over Category 3 or Category 5 cabling, which is useful for long-lived industrial and building-network installations. The external transformer maintains the required separation between the board and copper medium. Validate cable reach, auto-negotiation behavior, and system timing against the final magnetics and firmware configuration.

🔧

Network Interface Controller

The DP83847ALQA56AX can serve as the copper physical layer beside a digital MAC or embedded network controller. It translates the MAC-side digital signaling into 10BASE-T or 100BASE-TX physical signaling and reports the physical link through the interface described by the manufacturer documentation. This arrangement is suitable for compact single-port network adapters where a 56-WQFN footprint is practical. Pay particular attention to signal timing, shared reset behavior, pull components, and the exposed-pad thermal path in the PCB design.

🏠

Building Network Endpoint

DP83847ALQA56AX is suitable for building-network endpoints such as access terminals, room controllers, and commercial communications equipment that use 10/100-Mbps copper Ethernet. The device supports Category 3 and Category 5 unshielded twisted-pair media, helping designers accommodate existing horizontal wiring while retaining a conventional 3.3-V power rail. The external-transformer architecture must be implemented carefully to preserve galvanic isolation and EMC behavior. Verify the device's exact environmental limits and production ordering suffix before installation.

📟

Test and Measurement Instrument

The DP83847ALQA56AX can provide network connectivity in test and measurement equipment that requires a single copper Ethernet management port. Its dual support for 10 Mb/s and 100 Mb/s operation allows the instrument to connect to older 10 Mb/s infrastructure as well as faster 100 Mb/s networks, subject to the host driver's supported link modes. The small 56-WQFN package helps preserve instrument-panel space, while 5-V-tolerant I/Os assist host integration. Keep analog routing compact and follow the transformer reference layout.

Resumen de productos recomendados

DP83847ALQA56AX/NOPB Same-family ordering option for an equivalent 56-WQFN PHY configuration Se usa en: Industrial Ethernet Control Equipment, Embedded Network Interface, Communications Gateway, Network Interface Controller, Building Network Endpoint, Test and Measurement Instrument DP83847ALQA56AX Texas Instruments Se usa en: Industrial Ethernet Control Equipment, Embedded Network Interface, Communications Gateway, Network Interface Controller, Building Network Endpoint, Test and Measurement Instrument
What is the DP83847ALQA56AX?
The DP83847ALQA56AX is a Texas Instruments single-channel 10/100-Mbps Ethernet physical-layer transceiver in a 56-WQFN package. According to the manufacturer product page, it supports 10BASE-T and 100BASE-TX Ethernet protocols over Category 3 or Category 5 unshielded twisted-pair cables, with 5-V-tolerant I/Os and an external transformer for the cable interface.
What are the key specifications of DP83847ALQA56AX that engineers should know?
The principal DP83847ALQA56AX specifications are 10 Mb/s and 100 Mb/s operation, 10BASE-T and 100BASE-TX support, a 3.0 V to 3.6 V supply range, and 5-V-tolerant I/Os. The manufacturer also identifies integrated PMD sublayers and IEEE 802.3u Parallel Detection. The device is packaged as a 56-WQFN measuring 9 mm by 9 mm and uses an external transformer to connect to twisted-pair media.
What Ethernet protocols does DP83847ALQA56AX support?
The DP83847ALQA56AX supports 10BASE-T at 10 Mb/s and 100BASE-TX at 100 Mb/s. The Texas Instruments product page describes it as a full-feature single Physical Layer device with integrated PMD sublayers. It connects to Category 3 or Category 5 unshielded twisted-pair cabling through an external transformer.
What is the supply voltage of DP83847ALQA56AX?
The DP83847ALQA56AX operates from a 3.0 V to 3.6 V supply. The product listing identifies the device as a 3.3-V Ethernet transceiver, while the Texas Instruments product page notes that its I/Os are 5-V tolerant. Use the manufacturer datasheet for individual supply-pin limits, sequencing requirements, and decoupling recommendations.
Where can I download the DP83847ALQA56AX datasheet PDF?
The official DP83847ALQA56AX datasheet is available from the Texas Instruments document link at https://www.ti.com/lit/ds/symlink/dp83847.pdf. It contains the pin descriptions, electrical characteristics, register information, application circuit, and transformer recommendations. Use the manufacturer document for final PCB and firmware implementation rather than relying on an aggregator listing.
Where can I find the DP83847ALQA56AX pinout?
The authoritative pinout is presented in the pin-description table and package drawings in the Texas Instruments DP83847 datasheet at https://www.ti.com/lit/ds/symlink/dp83847.pdf. The DP83847ALQA56AX uses a 56-WQFN package, so verify every exposed-pad and signal assignment against the ordering-information table before laying out the PCB.
Can DP83847ALQA56AX be used in industrial Ethernet equipment?
The DP83847ALQA56AX is functionally suited to industrial Ethernet equipment requiring 10/100-Mbps copper connectivity, provided the design complies with its electrical, thermal, and environmental limits. Its 3.0 V to 3.6 V supply, 5-V-tolerant I/Os, external-transformer interface, and 56-WQFN package support compact embedded implementations. Confirm the exact temperature grade and qualification status before deployment.
Where can I buy DP83847ALQA56AX online?
Use the Request a Quote form on this page to ask about DP83847ALQA56AX availability, current lead time, and order quantity. The manufacturer product page is the appropriate technical starting point for lifecycle and ordering information, while a formal quotation is required for current commercial terms and scheduled supply.
What is the price of DP83847ALQA56AX?
Current pricing for DP83847ALQA56AX should be requested through the Request a Quote form on this page. The source listings establish that the part is offered, but they do not publish a qualifying quantity-break price table for this exact MPN. Submit the required quantity, packaging, and target date so the quotation can reflect the current supply position.
What is the lead time for DP83847ALQA56AX?
The current lead time for DP83847ALQA56AX should be confirmed through the Request a Quote form on this page. Lead time can depend on order quantity, date code, authorized-channel availability, and manufacturing allocation. Provide the forecast quantity and required delivery date so the supplier can return a meaningful schedule.
Is DP83847ALQA56AX in stock?
Use the Request a Quote form on this page to request the current DP83847ALQA56AX stock and delivery position. A listing confirms that the MPN is commercially offered, but it does not establish a guaranteed, immediately available quantity. The quotation response should state available quantity, shipment timing, and permitted order increments.
What can replace DP83847ALQA56AX?
The closest identified drop-in ordering option is DP83847ALQA56AX/NOPB, which retains the Texas Instruments DP83847 device identity and the listed 56-WQFN package. However, a true substitution must preserve the 56-WQFN land pattern, exposed-pad connection, power sequencing, transformer circuitry, register behavior, and host-interface requirements. Verify the suffix-specific ordering and lead-finish details before treating it as an interchangeable procurement option.
Is DP83847ALQA56AX the same as DP83847ALQA56AX/NOPB?
DP83847ALQA56AX and DP83847ALQA56AX/NOPB identify closely related orderable versions of the Texas Instruments DP83847 Ethernet PHY. Both are associated with the 56-WQFN device family and the same 10/100-Mbps copper-Ethernet function. Before substitution, compare the manufacturer ordering-information table to confirm whether the suffix identifies a grease requirement, lead finish, packing code, or another procurement attribute.
When should I choose DP83847ALQA56AX over another Ethernet PHY?
Choose DP83847ALQA56AX when the design requires a 10/100-Mbps copper Ethernet PHY, 3.3-V operation, 5-V-tolerant I/O capability, and implementation in the 56-WQFN package. The device is particularly relevant when Category 3 or Category 5 twisted-pair support and external-transformer isolation fit the product architecture. Compare register behavior, thermal requirements, package cost, and long-term sourcing before final selection.
DP83847ALQA56AX vs DP83847ALQA56AX/NOPB - which is better for a new design?
DP83847ALQA56AX/NOPB is the better candidate to evaluate first for a new design because the distributor listing explicitly identifies it as a 1/1 Ethernet transceiver in a 56-WQFN package. The functional difference between the suffixes must still be checked in the Texas Instruments ordering table. Select whichever suffix satisfies the required lead process, temperature grade, qualification, and packing constraints without changing the PCB footprint.
Does the DP83847ALQA56AX need an external Ethernet transformer?
The DP83847ALQA56AX connects to twisted-pair media through an external transformer. According to the Texas Instruments product page, this arrangement supports 10BASE-T and 100BASE-TX over Category 3 or Category 5 unshielded twisted-pair cables. Follow the manufacturer reference circuit for transformer selection, center-tap capacitors, magnetics wiring, and board layout to preserve signal and isolation performance.
Is DP83847ALQA56AX compliant with RoHS and REACH?
The RoHS and REACH status must be confirmed for the exact DP83847ALQA56AX ordering suffix through the Texas Instruments product page or current material-compliance documentation. The available product listing identifies the manufacturer, package, and Ethernet function but does not state the exact compliance declarations. Treat both statuses as unknown until the suffix-specific declaration is located.

Datos de referencia de ingeniería para DP83847ALQA56AX — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose DP83847ALQA56AX for a new 10/100-Mbps copper Ethernet design that uses a 3.3-V supply, needs 5-V-tolerant digital I/O capability, and can accommodate the 56-WQFN package with an external transformer. Evaluate DP83847ALQA56AX/NOPB when procurement needs the explicitly listed ordering variant, but verify the manufacturer ordering table for suffix-specific requirements before approval. The target MPN remains appropriate when the exact specified suffix, qualification, and packing configuration must be retained. Do not select a different PHY solely for a similar data rate: the cited LAN8720A is not a true drop-in option because its pinout, power sequencing, and interface requirements differ. For applications requiring gigabit Ethernet, isolated media interfaces, integrated magnetics, or a smaller package, select a device explicitly designed for those requirements rather than adapting the DP83847 footprint.

Comparación con alternativas

Parámetro Este producto DP83847ALQA56AX/NOPB DP83847ALQA56AX
Brand Texas Instruments Texas Instruments Texas Instruments
Package 56-WQFN (9x9) 56-WQFN (9x9) 56-WQFN (9x9)
Product Function 10/100 Ethernet PHY transceiver 10/100 Ethernet PHY transceiver 10/100 Ethernet PHY transceiver
Supported Data Rates 10 Mb/s and 100 Mb/s 10 Mb/s and 100 Mb/s 10 Mb/s and 100 Mb/s
Supported Protocols 10BASE-T and 100BASE-TX 10BASE-T and 100BASE-TX 10BASE-T and 100BASE-TX
Supply Voltage 3.0 V to 3.6 V 3.0 V to 3.6 V 3.0 V to 3.6 V
Digital I/O Tolerance 5 V tolerant 5 V tolerant 5 V tolerant
External Transformer Required Required Required
Parallel Detection Supported per IEEE 802.3u Supported per IEEE 802.3u Supported per IEEE 802.3u
Ordering Suffix DP83847ALQA56AX /NOPB suffix; exact suffix attribute is not quantified Target ordering designation

Diferenciadores clave

  • Same-family ordering option preserves the physical footprint (frente a DP83847ALQA56AX/NOPB)
  • Supports both legacy and fast copper Ethernet rates (frente a LAN8720A)
  • Supports copper cabling and an external transformer interface (frente a LAN8720A)

Notas de diseño

Follow the manufacturer reference circuit for the external transformer, center-tap capacitors, and PHY-side connections. Keep the analog network compact and route differential and power-supply paths away from exposed-pad and digital return currents. The DP83847 supports 10BASE-T and 100BASE-TX, so uncontrolled impedance discontinuities can degrade return loss, common-mode balance, or link-margin performance even when the digital interface operates correctly.

The 56-WQFN device includes an exposed thermal pad that should be connected to the PCB ground plane using the manufacturer-recommended via pattern. Estimated thermal performance depends on the actual copper area, via count, board stack-up, ambient temperature, and adjacent heat sources; these inputs are not stated here. Avoid placing thermally sensitive analog or magnetics components directly beneath an unventilated exposed-pad region.

Decouple each applicable supply pin locally and follow the manufacturer’s power-supply sequencing and reset requirements. The confirmed core supply range is 3.0 V to 3.6 V, while the digital I/O interface is described as 5-V tolerant. Do not use the 5-V-tolerant I/O statement to justify applying 5 V to the core supply. Verify voltage thresholds and absolute maximum ratings in the datasheet before connecting host signals.

Do not treat a modern 10/100 Ethernet PHY as a drop-in substitute unless its package, exposed pad, pinout, transformer interface, power sequence, and host-interface timing all match. The cross-reference listing specifically identifies LAN8720A as not being a true drop-in replacement for DP83847ALQA56AX because of pinout, sequencing, and interface differences. For the identified DP83847 suffix option, verify the ordering table before replacing the target MPN.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The available product information identifies a /NOPB ordering option but does not state the exact suffix-specific environmental or material-compliance declarations. Verify the current declarations for the selected ordering code with Texas Instruments.

Búsquedas relacionadas

DP83847ALQA56AX datasheet DP83847ALQA56AX datasheet pdf DP83847ALQA56AX pinout DP83847ALQA56AX schematic DP83847ALQA56AX equivalent DP83847ALQA56AX replacement DP83847ALQA56AX cross reference DP83847ALQA56AX footprint DP83847ALQA56AX price DP83847ALQA56AX stock Texas Instruments DP83847ALQA56AX DP83847 56 WQFN Ethernet PHY DP83847ALQA56AX industrial Ethernet DP83847ALQA56AX vs DP83847ALQA56AX/NOPB

Componentes & términos relacionados

Texas Instruments DP83847ALQA56AX DP83847ALQA56AX/NOPB DP83847 LAN8720A Ethernet PHY physical-layer transceiver 10BASE-T 100BASE-TX 10 Mb/s 100 Mb/s PMD sublayer IEEE 802.3u Parallel Detection Auto-Negotiation 5-V-tolerant I/O 56-WQFN QFN family surface-mount package external Ethernet transformer Category 3 cable Category 5 cable unshielded twisted pair industrial Ethernet embedded network interface
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ